How to handle vacation and daily business workload in cProjects

Hi,
we are planning to use cProjects for our ressource-management. The goal is also to take care of vacation and daily business workload. We would like to see that a ressource is not available on the specified day. Therefore we are thinking about a project with vacation and a workload and assign people to this project? Is there a best practice to handle vacation and the daily business workload?
Regards, Vanessa

Hi Sammar,
thanks a lot for your answer. This helps.
I have seen that my question is not really clear and therefore I would like to make it more concrete.
I am searching for a possibility to see - during staffing - that an employee is not available on several days. I don't care about the reason the ressource is not available but need to see this that the ressource is not available. If the worker is assigned to another task the demand is clear because it is handled within cProjects. But what about blocking of ressources (i.e. vacation) because this happens in an external system / HCM module? (Therefore I was thinking about to create a project for vacation and plan there the absences of my workers (because of vacation and other reasons). But is it not possible out-of-the-box to specify that the worker is not available on several days because I would setup a task for vacation and would need to assign him on several days and not only for a given time range.) Am I right with this assumption?
Also for the ressource planning: Sorry but I don't get the point with your answer (surely because I am not deep enough into the topic). How is it possible to have a project (lets call the task "daily business") and assign several ressources 25% to this tasks? I need to distribute the demand to several days. For example there is a worker that is using 25% for his daily time for training. In this time he is not available for other tasks. Therefore I would like to create the task, assign him to the task and cProjects should take the demand (8hrs / week) and split it into an demand of 2hrs / day. In this way I can block a ressource for everyday and in the ressource planning I see that he is only available 6hrs because there is already the demand of 2hrs on a daily base.... It this possible?
Regards, Vanessa

Similar Messages

How to handle rules and activities in AII

Hi experts,
How to handle rules and activities in AII. Is there any transaction code for it. please give some information, it will be hepful for me

In IMG go to Conditions & Rules to configure the relevant rules.
Rules in AII represent business process you intend to RFID enable. Each rule is made up of multiple activities that defines exactly how a particular rule functions.
SAP delivers standard rules & activities for standard scenarios of Pack, Load etc. processes.
For more information on AII rules and activities refer to the performance assistant available in IMG or read more at the link below:
http://help.sap.com/saphelp_autoid40/helpdata/en/index.htm
Hope this helps.
-Ashish

How To Handle Tickets and What are those

Hi Everybody,
Can anybody tell me, How to handle tickets and what are those.
srinivas

Hi,
Tickets are basically assocaited with Production support type of work.
Tickets are nothing but the medium through which problems reported either in the system or by users to the Production support team.
There are certain problem management tools that every organization uses (tickets are created and worked on using those tools). There are tools like Vantive, Remedy, CASE, etc.
Usually the helpdesk gets the first contact for any user problems and then they log a ticket with the appropriate support teams. The support teams then pick up those tickets and work on them till they are resolved. There are tickets created for user problems or any batch job failures, system failures, etc.
Tickets are usually classified as Critical, High or Low and again they are categorized as High Severity, Medium Severity or Low Severity. All these types of tickets have SLAs (Service level agreements) for the Support teams to respond and the resolve the tickets in.
Look at the threads below for similar posts :
tickets
Tickets
tickets
Cheers,
Kedar

How to handle "ok" and "cancel" button of dialog popup?

Hello everyone,
I'm using a dialog with type="okCancel". My question is how to handle ok and cancel button of this popup window. Here is my code below:
<af:popup id="kriterPopup">
<af:dialog title="Kriter Seçiniz" type="okCancel" inlineStyle="width:500px;height:400;" id="d2"
dialogListener="#{BasvuruDegerlendirmeBean.kriterDialog}">
<af:selectManyCheckbox label="Kriterler :" id="smc2"
binding="#{BasvuruDegerlendirmeBean.kritersCheckbox}">
<af:forEach items="#{BasvuruDegerlendirmeBean.kriterList}" var="item">
<f:selectItem itemLabel="#{item.ybKriter.tur}" itemValue="#{item.ybKriter.tur}" id="si3"/>
</af:forEach>
</af:selectManyCheckbox>
</af:dialog>
</af:popup>
I want to handle ok and cancel button of this window, and redirect to the pages which I want.
Can anyone help me how I can do?
Thanks, with my regards.
Ali

You need dialogListener..
    public void dialog1_dialogListener(DialogEvent dialogEvent) {
        if (dialogEvent.getOutcome().equals(DialogEvent.Outcome.yes)){ //for Yes
        }else{ //for Cancel
    }

OBIEE and Daily Business Intelligence

Has anyone tried merging the content of BI Apps and DBI?
If you have, please comment on the proposed solution http://www.appsbi.com/obiee-and-daily-business-intelligence/
Thank you
Nilesh
[OBIEE, BI, ERP|http://www.appsbi.com]
Dashboards

The BI apps which you can buy now from oracle had nothing to do with DBI.
The BI fusion (or something) which you could buy 2 years ago or so had to do everything with DBI. (but oracle stopped with this indeed)
it's all a bit confusing because Oracle still uses the same name.
This was an OBIEE solution on DBI. But custimizations were not supported on this. The BI apps you can be now will support custimizations/extensibilities!
Hope this will help you out for a bit...

HR Analytics and Daily Business Intelligence for HR

HI All,
Can anyone explain the difference between HR Analytics and Daily Business Intelligence for HR to me?
Thanks!

Oracle Daily Business Intelligence (DBI) for HRMS provides information about your workforce and your human resource management processes. It is a comprehensive reporting solution that provides workforce analysis, and workforce distribution. Built on the proven Oracle Human Resources suite of transactional applications, DBI for HRMS provides executives and Human Resource line managers with a daily view of the enterprise workforce using the HR Management dashboards.
Check
http://download.oracle.com/docs/cd/B25284_01/current/acrobat/115hridbiig.pdf
Oracle Human Resources Analytics provides organizations detailed analysis on HR programs and workforce performance. It integrates
critical data from across the enterprise value chain transforming information into relevant, timely, and actionable insight.
Check http://www.oracle.com/us/products/057353.pdf
Both are for Reporting purpose.
Thanks

Error handling, logging and monitoring business process

I would like to know more about error handling, logging and monitoring in business process? Can someone give more information on this one?

Chandran
Please refer to following tutorials to understand each of these topics in detail:
Validations:
http://www.orafmwschool.com/validations/
Exception Handling:
http://www.orafmwschool.com/exception-handling/
Fault Management Tutorial:
http://www.orafmwschool.com/fault-management-tutorial/
Business Activity Monitoring Tutorial:
http://www.orafmwschool.com/bam-tutorial/
You'll have to refer to Oracle documentation to understand more finer details.
-Amjad.

0Person to 0employee loading, how to handle start and end date

Hi
I need help on some basic understanding of time dependent master data object.
In my scenario i am loading 0employee and 0Person from R/3. I need to update 0employee from 0person.
0employee
BEGDA            ENDDA             PERNR        Position....................So many fields
10.10.2001     10.10.2004        8000123    Associate
11.10.2004     10.10.2008        8000123    Consultant
11.10.2008     31.12.9999        8000123    Senior Consultant
0Person
BEGDA            ENDDA             PERNR         City....................So many fields
10.10.2001     10.10.2003        8000123      Singapore
11.10.2003     10.10.2007        8000123      Tokyo
11.10.2007     31.12.9999        8000123      Newyork
As the begining and end date are different i can't simply read City from 0person into 0employee. If i go for checking the city for the start and end date in 0employee, i will get multiple records ( If try to get city for 0employee's first record, i will get 2 city Singapore and Tokyo).
Please help me out how to handle this ...... i think i am missing somelink somewhere
Thanks
Tripple k

Hi Srini
Yes i need to have parallel flow for both and in the cube where my reporting will be on monthly basis i need to read these 2 master data and get the required attributes ( considering last/first day of that month as per the requirement).......but i am just wondering this is common scenario....while there are so many threads written for populating 0employee from 0person......don't they have such requirement.....
Thanks
Tripple k

How to monitory Siebel and E-business with Oracle Grid Control 12c

Hi All,
Please i need any documents for Monitoring Siebel and E-business with Oracle Grid Control 12c.
Thanks in advance,
Mostafa

I would think this is indeed the only way to monitor the URL.
Perhaps you could try a solution in creating your own plug-in.
Check http://www.oracle.com/technetwork/oem/extensions/index.html for this.
Regards
Rob
http://oemgc.wordpress.com

How to handle mouse and/or keyEvents before JTable handles them

Just studying Jtables, but I do not understand some principles. one of the problems is which method in which class do I have to overwrite, so that I can handle mouse and keyboard-Events?
I believe,Using a glasspane is to complicated!
CAn somebody please "put my nose" into the right direction ?
Nice Sunday to You all.
Thanks
Hanns

Look at JComponent. You can override the methods:
public void processMouseEvent(MouseEvent e)
public void processMouseMotionEvent(MouseEvent e)
protected boolean processKeyBinding(KeyStroke ks, KeyEvent e, int condition, boolean pressed)
As of 1.3 the existing key events can be overwritten ( or you can add your own defined key events) by using input and action maps.
You can add bindings for any keyStroke and add your own defined action this way:
int i = JComponent.WHEN_ANCESTOR_OF_FOCUSED_COMPONENT;
m_table.getInputMap(i).put( KeyStroke.getKeyStroke(KeyEvent.VK_TAB, 0, false), "Tab - P");
m_table.getActionMap().put("Tab - P", new TabAction());
private class TabAction extends AbstractAction
public void actionPerformed(ActionEvent ae)
//define what you want tab to do here
You can get rid of the key/keyaction this way:
m_table.getInputMap(i).put(KeyStroke.getKeyStroke(KeyEvent.VK_ESCAPE, 0), "Quit - P");
m_table.getActionMap().put("Quit - P", null);
You could use java's pre-defined action this way:
Object tab_action_key = m_table.getInputMap(i).getParent().get(KeyStroke.getKeyStroke(KeyEvent.VK_TAB, 0));
m_table.getInputMap(i).put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "Enter - P");
m_table.getActionMap().put("Enter - P", tab_action_key);

How to handle the events of business object (BAPI)

Hi,
How to register to BAPI event and handle?
For example, for a business object 'inv', there is an event as 'created'.
I want to insert entry in a z table when an inv is created.
I assume that the 'created' event is triggered when an inv is created.
How i can register to that event and handle that event so that i can
insert an entry in z table.
Thanks,
Prasad

ComponentListener?
: jay

How to handle jquery and ajax call in single page application using coded ui

Hi,
I am facing a very tricky situation while using coded ui. My application interact with ajax and I was facing the issue to handle the ajax in the login page and other pages. I went through the post : http://stackoverflow.com/questions/17849074/jquery-ajax-success-not-getting-triggered-with-coded-ui-test-project
and got solution for my problem. Now when ever a ajax is getting called in the page its getting handle with app config file. However the issue I am facing right now is.
When i click on a button a window will appear which is actually a "div tag". Please see the image below. In the that window when I have to select a item from drop down, the ajax will get called, however it will get called only for the window,
it wont be called for the entire page.. i.e. it will update only the window. I am not able to handle this ajax call, script gets stuck in refresh state. I will request you guys to provide a work around for it.
I would like to add more details - Visual studio version - 2013 update 3, IE11.
Application details: Its a single page application which uses bootstrap framework. All the ajax call are dynamic.
Thanks in advance.

Thanks for the reply.
The window is not exactly a pop up window. Its a div tag in the same page. As this is my first time to work on a single page application I am not sure how it works. For the entire page I am able to handle the ajax call however the action performed
in the div tag is not getting handled.
Code for the window, I am not sure to what extend will it be helpful.
<div class="modal-content"><div class="modal-header"><div class="bootstrap-dialog-header"><div class="bootstrap-dialog-close-button" style="display: none;"><button class="close">×</button></div><div
class="bootstrap-dialog-title">Move Item to different task [FocusAudit]</div></div></div><div class="modal-body"><div class="bootstrap-dialog-body"><div class="bootstrap-dialog-message"><div><div
id="dashboard">
<table class="TFtable">
<tbody><tr>
<td colspan="2">
You are about to move the 24 selected item item to a different task. Select the task to which to move this item, (Optionally) enter notes about the task change, and click 'Change' to continue.
</td>
</tr>
<tr>
<td>Select New WorkFlow:</td>
<td><select class="form-control" id="MA_workflow" onchange="ChangeWorkFlow()"><option value="647446014">Batches<option value="647446007">Claim<option value="647446065"
selected="">Workflow1</option></select></td>
</tr>
<tr>
<td>Select New Task:</td>
<td><select class="form-control" id="MA_actions"><option value="647446025">BatchRebuild</option><option value="647446054">Complete</option><option value="647446039">DataIntegrityCheck</option><option
value="647446038">FocusAudit</option><option value="647446053">FocusAuditMiner</option><option value="647446037">FocusAuditSelect</option><option value="647446055">LocationRouter</option><option
value="647446029">MineForSBT</option><option value="647446022">OCRtoWebDE</option><option value="647446024">OnePass</option><option value="647446049">OnePassRouter</option><option
value="647446050">OnePassUS</option><option value="647446060">QAuditImporter</option><option value="647446045">QIAutoAuditGrader</option><option value="647446058">QIAutoAuditInjector</option><option
value="647446048">QIMiner</option><option value="647446040">QISampler</option><option value="647446056">QIVerify</option><option value="647446059">QIVerifyGrader</option><option
value="647446047">QIVerifyUS</option><option value="647446021">RecoRules</option><option value="647446082">Review</option><option value="647446042">Router</option><option
value="647446023">Validate</option><option value="647446081">Verify</option><option value="647446080">WebDEFileCreator</option></select></td>
</tr>
<tr>
<td>Select New Status:</td>
<td>
<select class="form-control" id="MA_status">
<option value="ready">Ready</option>
<option value="reject">Rejected</option>
<option value="hold">Held</option>
<option value="ready">Keep Status From Original Task</option>
</select>
</td>
</tr>
<tr>
<td colspan="2">Notes:</td>
</tr>
<tr>
<td colspan="2">
<textarea name="MA_statusnote" class="form-control" id="MA_statusnote" maxlength="250" rows="5" cols="40"></textarea>
</td>
</tr>
<tr>
<td style="text-align: right;" colspan="2">
<input class="btn btn-default list-inline" id="btnSubmit" onclick="prepareData_MoveToAction();" type="button" value="Change">
<input class="btn btn-cancel" id="btnCancel" style="padding-left: 5px;" onclick=" dialogInstance2.close();" type="button" value="Cancel">
</td>
</tr>
</tbody></table>
<div id="overlayDialog" style="display: none;">
<div style="width: 100%; text-align: center;">
<h1>Processing...</h1>
<img src="Images/ajax-loader.gif">
</div>
</div>
<div id="dData_MoveToAction" style="display: none;" data-itemcount="24" data-oldactionidno="647446079" data-oldstatus="ready" data-oldactionname="FocusAudit" data-fnparent="PS"></div>
</div>
<script id="scrpd" language="text/javascript">

</script></div></div></div></div><div class="modal-footer" style="display: none;"><div class="bootstrap-dialog-footer"></div></div></div>
I agree the point the UI has to be active or else the script will have issue during the playback. In my scenario I have to work on that window. I have to perform action on it. Now when the window(div thing) comes up the page in the background goes disable
till the action is performed on the window or the window is closed. I have to perform action on it then only I can proceed with the TC automation. Please let me know any option to solve this problem.
Thanks
Ahetejazahmad Khan.

How we handle CLOB and BLOB Datatypes in HANA DB

Dear HANA Gurus,
We have would like to build EDW using HANA base on our source system Oracle and it's supports CLOB and BLOB datatypes
Would you please suggest how do we handle in HANA DB.
Let not say it's oracle specific.
Regards,
Manoj

Hello,
check SAP HANA SQL Reference Guide for list of data types:
(page 14 - Classification of Data Types)
https://service.sap.com/~sapidb/011000358700000604922011
For this purpose might be useful following data types:
Large Object (LOB) Types
LOB (large objects) data types, CLOB, NCLOB and BLOB, are used to store a large amount of data such as text documents and images. The maximum size of an LOB is 2 GB.
BLOB
The BLOB data type is used to store large binary data.
CLOB
The CLOB data type is used to store large ASCII character data.
NCLOB
The NCLOB data type is used to store a large Unicode character object.
Tomas

How to handle (drag and drop) and Action Event in a JList?

I am having many JList,
On click of an element in JList I am loading a image in JSP.
But If I try to drag and drop one image from one bucket to another bucket Iam not getting any problem,
But I when I drag all the images from the target List to some other List and make the target List empty.
Now If I try to move the image from source list to the target list Iam getting this error,
Exception in thread "AWT-EventQueue-6" java.lang.NullPointerException
     at pdfViewer.NewFileSegregater$24.valueChanged(NewFileSegregater.java:1944)
     at javax.swing.JList.fireSelectionValueChanged(Unknown Source)
     at javax.swing.JList$ListSelectionHandler.valueChanged(Unknown Source)
     at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown Source)
     at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown Source)
     at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown Source)
     at javax.swing.DefaultListSelectionModel.insertIndexInterval(Unknown Source)
     at javax.swing.plaf.basic.BasicListUI$Handler.intervalAdded(Unknown Source)
     at javax.swing.AbstractListModel.fireIntervalAdded(Unknown Source)
     at javax.swing.DefaultListModel.addElement(Unknown Source)
     at pdfViewer.NewFileSegregater.actionPerformed(NewFileSegregater.java:2918)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener$Actions.actionPerformed(Unknown Source)
     at javax.swing.SwingUtilities.notifyAction(Unknown Source)
     at javax.swing.JComponent.processKeyBinding(Unknown Source)
     at javax.swing.KeyboardManager.fireBinding(Unknown Source)
     at javax.swing.KeyboardManager.fireKeyboardAction(Unknown Source)
     at javax.swing.JComponent.processKeyBindingsForAllComponents(Unknown Source)
     at javax.swing.JComponent.processKeyBindings(Unknown Source)
     at javax.swing.JComponent.processKeyEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Please help me how to solve this problem..

Er, sure. In the class pdfViewer.NewFileSegregater on line
1944 (!), in the valueChanged() method, something is pointing to
null.
That method is being called from
pdfViewer.NewFileSegregater.actionPerformed() on line
2918 (!!).
Of course, none of us know what's going on in those code
segements but you. And for the record, that's not how to spell
Segregator.

How to handle NavigationController and TabBarController

I need a good explanation how can I handle the UINavigationControllers and the UITabBarControllers on iOS6 with StoryBoards.
1. When I load my app (1st ViewController) I need if (FB login = success) it jumps with segues to the 2nd ViewController automatically. Can I use a Navigation Controller on the root?
2. I need a UITabBarController that connects to 3 UICollectionViewControllers (one tab for each one). I have to put the UITabBarController like root? If yes, how can I handle the others Viewontrollers between them? Like this:
3. I need a custom BarButtonItem (like the "Delete All" that you can see on the image 2) on each CollectionViewController, I need to use a UINavigationController for each one?

Hi Sudheer,
      Whenever you have to maintain fields for currencies and quantites u need to refer them to currency key and quantity key which also have to be present in the table.
If suppose you are creating a table for Employee. And suppose that fields would be like :
EMPID                           -
       employee id
EMPNAME                    -
      employee name
DEPARTMENT             ---          department
SALARY                       --                 salary        ( Data Type u2013 CURR )
WEIGHT                       -
         weight of the employee ( Data Type -- QUAN )
Now the fields SALARY AND WEIGHT fields should refer to currency and quantity keys. So you need to have two more fields like
CURRKEY         ---     Data Type ( Cuky )
Quantity             ---     Data Type ( Unit )
Now we have to attach the field Currkey to the field Salary
                               And the field Quantity to the field Weight
So when u create a table you can see a tab Currency / Quantity fields.
Here You can give the reference table and the reference field against the salary and weight fields.
Regards,
Swapna.

How to handle vacation and daily business workload in cProjects

Similar Messages

Maybe you are looking for