How to handle warning message for the fields in tab merging , PERSONAS 2.0

Hi all,
Please advice me on the below issue.
In a transaction VA32 , I have merged the fields from one tab to another tab using tab caching.
when i try to change the value of a merged fields , it throws the warnings message. So it is continuously looping from one tab to another tab.
So i tried to use the additional editor concepts in tab caching as below.
Looping is stopped and throws warning message in the same tab.
All the changes are saved successfully only when the enter button is clicked once in the main screen, else the changes are not saved and my previous value remains.
Anybody have an idea on how we can use Additional actions in Tab caching concepts.
Thank you,
Arun

Hi Kranthi,
When i try to save the fields which i merged from different tab is not saving.
Please find the below details.
Green highlighted fields are custom fields which is merged from different screen like header or item overview screen. This is handled in script button.
Red highlighted fields are merged from different tab like shipping or sales using tab caching concept.
While changing the value of the fields which is merged from different tab , and press ENTER then it throws the Warning message if occurs.
After warning message, if i try to save using the script button for copying all the custom fields which is merged from different screen , pasted it to their respective screens and also saved.
Its working fine.
When i try to save it before pressing ENTER button then the respective changes had made in the merged fields from different tab are not reflected.
How we can handle this issue?
Thank you,
Arun

Similar Messages

How to handle "Validation failed for the field - Tax code" issue?

We had mass uplaod the order that create on Mar with tax code effective date on Apr. Now we would like return on this order and getting error of "Validation failed for the field - Tax code". How to handle this issue?

Hi
You will have to check if the Tax_Code of RMA being received is the same as the one in the related sales order.
If not you will need to use the same tax_code.
Refer below document : Doc ID 1584338.1

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Show Warning Message near the field

Hi all,
I want to show my warning message near the field which is required instead of right at the bottom.
I use the following onSubmit() Method when the user hits the submit button to check for required fields:-
if (this.testfield == null) {
this.setBackgroundColor(componentId : "testfield", color : "Red");
this.focus(componentId : "testfield");
this.setVisible(componentId : "testfield", visible : true, collapsed : false);
this.showWarning(warning : "Testfield is Required");
else {
this.submit(text : "submit");
This gives me the error message right at the bottom of the presentation as opposed below the field.
How can I get this message to appear right below the field which is required?
Any idea?
I tried this.setText()
But it does not work.

The "showWarning" and "showError" methods used to be more useful when we had the option in earlier releases (5.7) to place them at either the top or the bottom of the presentation.
I now never use either one of them.
This is not what you want to hear and know you've thought of this, but what I do is add text attributes (errorMessage1, errorMessage2,...) to the BPM object and then place the text fields on the presentation as read-only, bold red foreground color text fields directly above the field causing the error. In my presentation's initialization method, I always use the setVisible method to false and collapse them. In your submit logic, you'd set the value of the error message attribute and set the error message field to be visible and not collapsed. You need to add an on change event for the field causing the error that will make the error field not visible and collapsed. Similarly, if you have a Save button, you need to make all the error fields not visible and collapsed.
Dan

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

How to create Search help for the field /SAPSLL/PRGEN-ATTR20V

Hi ,
I need to add a search help for the field /SAPSLL/PRGEN-ATTR20V and their is a chk table used for this field is /SAPSLL/TCOATV20.
In this table /SAPSLL/TCOATV20-ATTRV20V is a Primary key field.
How can I add search help for this field?
Any suggestions will be appreciated!
Regards,
Kittu

HI,
Fixed on my own..
I am closing this thread!
Thank you!
Kittu

How to enhance F4 help for the field KUNNR

Hi All,
I have a requirement to create custom table with the fields kunnr auart prodh among these fields for the field KUNNR I want to enhance the F4 functionality when user entering the data into this custom table means i should restrict only kunnr values which falls under particular customer account group. How can overwrite the existing F4 functionality of the KUNNR for this custom table?
Thanks&Regards
Mahesh

Hi
U create ur own serach help using the searchelp option is se11 and create it based on ur requirement zand make it as elementary not as collective.
go to SE 11 and click on KUNNR and click on scrh Help puchbutton and assign ur search help and it will be assigned to the same.
If u want use already one then DEBI, C_KUNNR A_KUNNR
QVDM_KUN REKUNNRCN RE_KUNNR are there
these are collective serach helps and assign ur help to any of these.
kindly let me know if u need further help.
Thanks
Shiva

New to SOAP - How to create SOAP message for the SOAP described

Hi Friends,
Im bit new to SOAP-JAVA interactions.
I have an SOAP describing
POST /abc/WebSrevices/MyService.asmx HTTP/1.1
Host: 127.0.0.1
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "http://tempuri.org/BillingAddressValidation"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<BillingAddressValidation xmlns="http://tempuri.org/">
<inXml>string</inXml>
</BillingAddressValidation>
</soap:Body>
</soap:Envelope>
My question is How can I construct an equivalent JAVA message using SAAJ
I wrote like the following
public void performSOAPReadWrite(String transaction){
try{
SOAPConnectionFactory scf = SOAPConnectionFactory. newInstance();
SOAPConnection con = scf.createConnection();
MessageFactory mf =
MessageFactory.newInstance();
SOAPMessage msg = mf.createMessage();
SOAPPart sp = msg.getSOAPPart();
SOAPEnvelope envelope = sp.getEnvelope();
//Adding Content to the Header
envelope.getHeader().detachNode();
SOAPBody body = envelope.getBody();
SOAPElement billingAddressValidation =
body.addChildElement("BillingAddressValidation","http://tempuri.org/");
SOAPElement inXml =
billingAddressValidation.addChildElement("inXml");
inXml.addTextNode(transaction);
URL urlEndpoint = new URL(DEFAULT_SERVER);
// 127.0.0.1/abc/WebSrevices/MyService.asmx
System.out.println("Sending Message");
SOAPMessage reply = con.call(msg,
urlEndpoint);
System.out.println("Reply is "+reply);
}catch (Exception e) {
e.printStackTrace();
// TODO: handle exception
Can any one let me know whats wrong in this ?
Thanx in advance
Im waiting for ur reply
Mahesh Raja Vandyala
Senior Analyst

Hi,
When im running the program I am getting a
javax.xml.soap.SOAPException: Failed to send message:java.io.IOException: The server at http://127.0.0.1/abc/WebSrevices/MyService.asmx returned a 500 error code ( Internal Server Error )
Please ensure that ur URL is correct and the Web service has deployed
This is web service is provided by .net team and im required to take the services of that web service to retrieve some information provided by that.
I can launch the webservice definition thru IE....their they have provide a text box with a Invoke button.
The same data that im sending thru code if invoked thru IE is working fine.
I suspect that the way Im construcint the SOP message is wrong.
Any help in finding out the correctness of the Message in the java code ?
Thanx
Mahesh

How to find config table for the field "language" in infotype-0002

Hi Gurus,
We are implementing ECC 6.0 at our client site.
The client wants to use language field in persoanl data infotype as mother tongue and include indian languages.
He don't want all other languages like spanish etc instead he wants indian languages like Hindi,telugu,tamil etc.
can any body please help me in which table we can configure this.
Thanks in advance
Regards
AnanyaK

Hi,
You can enter the languages in the IMG
Path is
IMG-> Personnel Management-> Personnel Administration -> Personnel Data-> Languages
Or you can simply go for technical information in the field name and will get the table name for that field and can maintain in SM30
Regards,
Kapil Kaushal

How to handle Undelivered messages when the Target Application is down

Hi
in our scenario,
sapEccSystem>OuboundProxy>PI>ReceiverAdapter>ReceiverThirdPartyApplication
the known issue with the ReceiverThirdPartyApplication is, it gets down in frequent intervals, and automatically gets up and running, but we don't know at what times it will be down and when it will be up again.
in this asynch scenario, when the scenario gets triggered from source SAP system, and at that time, if the receiverAppl is up, it is working fine.
but when the scenario gets triggered from source SAP system and at that time if the receiverAppl is down, the message exchange gets failed
to address these kinds of issues,
1. is their any concept of Queuing or anything in PI, that can keep the messages in something like Queues and process them when the receiver application gets up., if yes how can configure them
Does PI act as Queuing server, so that it delivers the pending messages one ofter another, until they are all finally sent.
or
2.is there any retry mechanism, where can specify something like, the undelivered message needs to be resent after waiting for an hour.
thanks,
Madhu_1980

Hi, the number of retries and the retry interval are modifiable java system parameters of the [Service SAP XI Adapter: XI|http://help.sap.com/saphelp_nw04s/helpdata/en/29/22ee41c334c717e10000000a155106/content.htm], check section Properties Related to Outbound Processing. You can change these properties in NWA of PI under Configuration Management -> Infrastructure -> Java System Properties -> Services -> XPI Adapter: XI. The screen in the bottom with the heading Extended Details displays the adapter's service property.
I found these properties in oss Note 730870 - FAQ XI 3.0/ PI 7.0/ PI 7.1/ PI 7.11/ PI 7.2/ 7.3 RFC Adapter, under Q3, when doing research on another topic.
Regards, Martin

How to include header name for the fields in application server

Hiiii Experts,
                      LOOP AT fp_i_wwcmp INTO fp_wa_wwcmp.
      CONCATENATE fp_wa_wwcmp-pernr
                   fp_wa_wwcmp-etype
                   fp_wa_wwcmp-maxbt
                   fp_wa_wwcmp-epayperiod
                   fp_wa_wwcmp-currencyid
                   INTO l_v_data SEPARATED BY l_v_char_tab.
i need to insert header names for etype,maxbt,epayperiod,currencyid which are needed to be transfer to application server.
regards,
kasyap
Edited by: Harish Kasyap on Sep 18, 2009 2:49 PM

hiiiii clemens thanks a lot for ur reply,
                                                           this is not an alv report,the output is directly transfered into application server AL11.
and i have used this statement
CONCATENATE 'ID'
                'EpayType'
                'EpayAmount'
                'EpayPeriod'
                'CurrencyID'
                   INTO l_v_data SEPARATED BY l_v_char_tab.
transfer l_V_data.
is this the rite one
regards,
kasyap

F4 HELP for the field

HI all,
in the report selection screen i have one field for which F4 HELP doesnt exits, even in the table for that field F4 HELP is not there but the user requests me to get the F4 HELP for that field in the selection screen .
please help how to get F4 HELP for the field
thanks in advance.

The following are the options for F4 help
Code:
PARAMETERS: p_ccgrp LIKE rkpln-ksgru. "Cost Center Group
*Input help for Cost Center Group
AT SELECTION-SCREEN ON VALUE-REQUEST   FOR p_ccgrp.
TYPES: BEGIN OF ty_ccenter_group,
setname TYPE setnamenew,
descript TYPE settext,
END OF ty_ccenter_group.
DATA: it_ccenter_group TYPE TABLE OF ty_ccenter_group.
CLEAR it_ccenter_group.
SELECT a~setname
b~descript
INTO TABLE it_ccenter_group
FROM setheader AS a INNER JOIN
setheadert AS b ON
asubclass EQ bsubclass AND
asetname EQ bsetname
WHERE a~setclass EQ '0101' AND
b~langu EQ sy-langu.
CALL FUNCTION
'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ret field        = 'SETNAME'
dynpprog     = v_repid
dynpnr         =    SY-DYNR
dynprofield = 'P_CCGRP'
value_org    = 'S'
TABLES
value_tab   = it_ccenter_group.
F4IF_FIELD_VALUE_REQUEST:
This FM is used to display value help or input from ABAP dictionary. We have to pass the name of the structure or table (TABNAME) along with the field name (FIELDNAME). The selection can be returned to the specified screen field if three
parameters DYNPNR, DYNPPROG, DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
Getting F4 help based on other field .
Suppose if there are 2 fields on selection screen user name and Purchasing Document and the case is getting values of Purchasing Document Number based on user name
Code:
TYPES:   BEGIN OF ty_match_nast,
                objky TYPE na_objkey,
                END OF ty_match_nast.
Data: it_match_nast   TYPE STANDARD TABLE OF ty_match_nast.
Data: it_dypr_val   TYPE STANDARD TABLE OF dynpread.
DATA: wa_dypr_val TYPE dynpread.
DATA: it_return TYPE STANDARD TABLE OF ddshretval.
Case when only username value is entered.
       SELECT objky
        FROM   nast
        INTO TABLE it_match_nast
         WHERE kappl = c_ef
         AND   kschl = c_neu
         AND   usnam = wa_dypr_val-fieldvalue.
      ENDIF.
*Read User name on selection screen field value
CLEAR wa_dypr_val.
REFRESH it_dypr_val.
wa_dypr_val-fieldname = 'P_UNAME'.      "User name
APPEND wa_dypr_val TO it_dypr_val.
*FM to get the value
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname             = sy-repid
      dynumb             = sy-dynnr
      translate_to_upper = 'X'
    TABLES
      dynpfields         = it_dypr_val_h.
*Pass the values to f4 table
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield     = u2018OBJKY'
        dynpprog    = sy-repid
        dynpnr      = sy-dynnr
        dynprofield = 'P_EBELN'
        value_org   = 'P'
     TABLES
        value_tab   = it_match_nast
        return_tab = it_return.

How to remove the 'New Entry' button in the warning message for a dialog bo

Hi Experts,
I am calling a Modal Dialog box screen having a pushbutton.
On the click of the pushbutton, I am performing some checks, and giving a warning message.
The warning message comes as a popup in this case and has three buttons on it.
One of these buttons is titled 'New entry'.
I dont want that button to come on the warning popup.
Please let me know if there is a way out for this.
Thanks in advance.
Useful answers will surely be rewarded.
Regards,
Himanshu

Hi Jyothi,
Thanks a lot for ur prompt reply.
But, in my dialog screen, on click of the button I am simply using the statement :
MESSAGE W000(0K) with 'text'.
The resulting warning message comes as a popup with the 'New Entry' button on it.
From the warning popup, how can I remove the button.
Please let me know.
Thanks.
Regards,
Himanshu

How to show a single error message for all fields

Hi
I have a JSF from containing around 10 controls(input, select etc.) .
Now I need to display an error message in case any of the mandatory control has validation error.
Message format would be like
"*Please,Complete the fields marked with yellow!"* The message I need to show in a div tag with Yelow background.
Currently, I am getting individual default error message in case validation fails and related field is bordered with Yellow.
My code is below.
*<h:panelGrid columns="3">*
*<h:outputText value="#{msgProv.bi_firstname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText*
*value="#{brokerInformationFields.firstName}"*
*label="#{msgProv.bi_firstname}" id="firstName" required="true">*
*<f:validateLength maximum="10" minimum="2" />*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:outputText value="#{msgProv.bi_lastname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText label="#{msgProv.bi_lastname}" id="lastName"*
*value="#{brokerInformationFields.lastName}" required="true">*
*<f:validateLength maximum="20" minimum="1"/>*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:commandLink action="#{brokerInformationActions.submit}">*
*<h:graphicImage value="/images/axa/btn_submit_from.png" style="border:0px;"/>*
*</h:commandLink>*
I am using (JSF1.2,Rich Faces 3.3.0,Facelets.)
And a Phase Listener from
http://balusc.blogspot.com/2007/12/set-focus-in-jsf.html
This Phase listener is to border the control with Yellow in case validation fail.
Now my Query
*1) How can I show a single message for all fields as I marked above in case of validation failure?*
*2) Now, the control is becoming yellow borderd when user clicks the submit button and validation fails.*
*User can move from one control to other using tab. That time proper validation message is appearing.*
*but the border of the control is not changing to yellow.*
*What's the correcion can be made to meet that requirement too.*
regards
Roy

Hi Nabheet,
Thanks for your response.
The FM returns the error messages if they are standard ones. For example, if the posting period is closed - the FM will not allow the Workflow to proceed further.
But in this case, I have a custom error - for a particular Profit center, Cost center and I/O fields are mandatory(not at time of parking, but should be filled before posting).
Since this is not a standard error, this FM will not stop workflow from proceeding further. How can I have the custom error captured in this FM?
Thanks.

How do I enable the low ink warning message on the HP 7520 e all in one printer

How do I enable the low ink warning message on the HP 7520 e all in one printer? Or is it even available on this model?
This question was solved.
View Solution.

ccardwell,
Welcome to the HP Forum.
The following Assumes a Recent Windows Operating System is installed on your computer...
The Photosmart 7520 allows you select when you would like to receive Ink Alerts:
Right Away -- as soon as there is a need for attention
Only when you initiate a print job
The Full Feature Software installation procedure places the Printer Assistant shortcut on the Desktop.
Install Full Feature Software – Photosmart 7520
Open the Printer Assistant shortcut > tap on the Estimated Ink Levels icon (along the top ribbon) >
Toolbox opens > Select tab Advanced Settings >
Under Show Alerts > CHECK desired setting
Click Close
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

How to handle warning message for the fields in tab merging , PERSONAS 2.0

Similar Messages

Maybe you are looking for