How to have a line down middle of page betw 2 columns but...

for some graphics, the graphics flow over the two columns. In setting up a template, how to make that line be flexible so that when there is a graphic that takes up more space, the graphic has an amount of white space around it..(would that be an object style). Ok, would you put the line on the master page?

If you are referring to text wrap when you say outset, then it will push the text in the main frame out of the way, but it won't push the rule or leave a gap next to it. The only way to do that is to adjust the rule or hide it with something (like the [Paper] stroke).
If the caption frame is going to be below the image, this gets more complicated, especially if the image isn't always at the top of the page. About the best you can do for that is to apply the same stroke to both the image and caption frame, and have them overlap or touch, which means you can have spacing between the two from the width of the stroke to twice the width, but not more. You'll also need to fill the caption frame with paper to knock out the rule.
If the image group will always completely cover one end or the other of the rule you can pay with different width strokes for the two frames.
It might be best to put a grouped image/caption frame in a library, already styled, or leave one on the pasteboard somewhere.

Similar Messages

Photos have a line down middle.

Hi, I have a canon rebel t3i and my pictures are coming out with a line down the middle. One side is lighter than the other. I thought it was just the screen, but when I print my pictures the line appears with half of the photo being darker/lighter. Do I need a new lens?Please help.

Are you using flash? If so, is it the one on the camera, or is it a Speedlite in the hot shoe?
If the flash is not sync-ing correctly with the shutter, you may get that, as the shutter is really just a rectangular opening that travels horizontally in front of the sensor. If the opening passes part of the picture before the flash fires then half the picture will not get light from the flash.
I once had that happen when my Speedlite flash had slid loose in the shoe so it was not talking well with the camera.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Vertical black lines down middle of page

Hi folks,
I have an LaserJet 4250n that's putting vertical light black smudges/lines down the center of my pages. It's all the way down, but it gets lighter at certain points and picks back up again. I've tried replacing the toner cartridge and cleaning the rollers, to no avail.
Any ideas?
Thanks!
James
This question was solved.
View Solution.

Hi James,
I am a printer technician for HP in Australia and a full time employee. I look after many printers including this one.
Lines down the page can be caused by a few things - depending on what the line looks like.
If it is a smudged dirty streaky mark continously down the page, you migh have a dirty fuser - it may have been picking up toner and it has built up and then put it back down on the paper.
A thin defined black line might be a scratched drum or developer - the laser might be refracting and drawing the defect onto the drum.
Blank or white lines could be something stopping the toner from getting to the paper - transfer roller under the toner might have something stuck on it.
A repeated mark or defect could also be a dirty fuser - glue or wax from envelopes and labels could do this.
Try swapping the toner with another to test - borrow one if you can.
Run 3 or 4 cleaning pages - in the menu, configure device, print quality menu, create/process cleaning page.
Remove the fuser - back door comes off, little blue clips, pull it. out - rotate using the green knob and you might be able to gently remove something stuck in it.
If you can get to another 4250 or 4350 you could borrow the fuser and find out.
For this machine, I find worn out fusers and dirty printers are most commonly showing these symptoms. Next common is low quality after market cartridges.
Hope I can help you here
Steve Hewitt
HP Australia
Melbourne.
Although I am an HP employee, I am speaking for myself and not for HP.

How to have button in down state as page opens

On opening a new "blank" subsidiary page using "getURL",
there are 2 buttons on the new page. Each button plays a moveclip.
(The first movieclip is already playing as the new page opens). I'd
like to have the corresponding button already in the down state as
the page opens. Is there a conditional statement I could use for
this? I'm using AS 2.
The code on each button is as follows:
on (release){
_root.resetButtons();
this.gotoAndStop("down");
on (rollOver){
if (this._currentframe <> 3)
this.gotoAndStop("over");
on (rollOut, releaseOutside){
if (this._currentframe <> 3)
this.gotoAndStop("up");
Many thanks for any advice.

Yes, but you'll have to make a bunch of changes. If you
convert your buttons to movieClips and insert frame labels and
actions, you can get the resulting movieClip to act as a button.
Then you can tell one of the button/movieClips to
gotoAndStop("_over"). It will then start that way and then work
normally after it is used. Look at
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=00000230.html,
for more information using a movieClip as a button.
Alternately, you could just put in a static graphic of the
button's over state in place of the button until it should show
normally, then swap out the graphic for an actual button.

I have a faded streak down middle of page when copying, scanning, faxing only

When I copy or scan a document the copy or scanned page comes out with a faded streak verically down the middle of the page. the faded area is approx 2 3/4 inches wide. I can print from the computer fine, no streak appears on the printed copy. This only happens in copy, scan and probably faxing. I've done all troubleshooting for scanning, faxing and copying for this type of all in one printer. Any suggestions.

Hi , Welcome to the HP Forums! I understand that you have a faded streak down middle of page when copying, scanning, faxing only, on your HP Officejet Pro 8620. I am happy to look into this for you! Please, try the troubleshooting steps within this quality guide, Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans, and let me know what happens! Hope this resolves your issue! “Please click the Thumbs up icon below to thank me for responding.”

In alv report , how to reserve 20 lines from beginning of page

hi experts
in alv report , how to reserve 20 lines from beginning of page.
regards
subhasis.

If by reserve you mean should not move on scrolling then make them KEY from fieldcatalog.
But I think maximum of 10-12 can be handled by that.
Regards,
Amit
Reward all helpful replies.

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

White line down middle of document

Need help. I have a white line down the middle of all documents, whether from computer or scanner on our MF2727nf. We have replaced cartridge and still have the problem.
Any help will be appreciated.
Thanks,
Rochel

Removing and re-installing iTunes won't do any good as it does not pertain to the iPod in any way. If none of the 5 R's of troubleshooting helped, we can definitely say that it is a hardware issue with the iPod's LCD display.
http://www.apple.com/support/ipod/five_rs/
Sometimes it helps to let the battery fully drain and then redoing the 5 R's.
B-rock

Black line down middle of copies

We have a HP 6480 all in one that prints fine but when we make copies it prints a black line down th middle of the copy? I have cleaned the glass and rollers outside and in. what else can I do??

Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to have vertical lines in NSTableView?

how to draw vertical lines in NSTableView? thanks.

Where do you want to draw them? If you're referring to vertical lines where two columns meet, it's just a setting in Interface Builder, though you can do it programmatically too. Select the NSTableView in Interface Builder and click the checkbox for "Vertical Lines".
You can do it programmatically as follows:
to have vertical lines:
[tableView setGridStyleMask: NSTableViewVerticalGridLineMask];
to remove vertical and have no lines:
[tableView setGridStyleMask: NSTableViewGridNone];
Hope this helps....
Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM Mac OS X (10.4.6)

How to move wax line down?

Is it possble to move wax line down from an text adornment like it does "Paragraph Rules"->"Keep in frame"?

Olemacr wrote:
Thanks for the reply but nothing happens on my iMac using those keys.
There are global shortcuts, which should work in all apps; there are Cocoa text engine shortcuts, which should work in all apps which use the Cocoa text engine; and there are app shortcuts. How a specific app responds to a command such as Page Up is not necessarily under the OS control.
The shortcuts indicated by Don Archibald are correct. How any specific app responds is another matter. So tell us exactly what app (and version) you are using and maybe we'll be able to help.
I did find that on my MBP fn and up or down arrows did move a page at a time
For some keys, and for obvious reasons, on the MBP fn is similar to control.

How to have vertical line appear programmatically between columns?

Hello,
For a forecasting report, I need to draw a line between "past" columns and "future" columns. Unfortunately, just turning on a right or left border is not satisfactory (spaces between rows gives a "dashed line" appearance). An SAP marketing type told us "Oh, you can have a line drawn automatically on your report, based upon some condition". I've looked and looked, and cannot find any built-in programming objects which would provide for this. I'm using Crystal Reports XI Rel 2.
Any ideas?
Don Dazey
707.868.7154
Booz Allen Hamilton
Fairfield, California

If you've tried drawing a line, and enabling "extend to bottom of section" and that didn't work...
Would it be true to say that the height of the sections where you want this line to appear within vary as you go through the report? Do you want the line to appear at a different x-position depending on some value?
I have a fudgy fix or two, but I need to know if you just missed he "extend" trick first!
Cheers,
J

Black line down centre of page - HP4610

When scanning, faxing or copying I get a crisp, straight, narrow line down the centre of the page.
How can I correct this? Thank you

Hi Seaspray15,
Welcome to the HP Support Forums! I see when you are scanning, copying or faxing with your HP Officejet 4610 you are running into some quality issues.
I would like you to start here: Copy Quality Issues, please complete ALL steps listed and let me know the outcome.
I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to have a unique requestId for a Page for multiple users

Hi,
Can someone please tell me how to get a unique RequestId whenever a page is visited. I need to have a unique RequestId generated for each user if they are on some specific
page. Whenever a users refreshes a page or come to the page by clicking back button want to have a unique requestId always.
Can I use sessionRequestId or something for HttpServletRequestObject that always gives me a unique Id.
Thanks

Unique for how long?
Eternally unique ?
unique until the server restarts?
Most simplistic approach would be to have a static/singleton counter. It wouldn't work perfectly in high volume sites, but should work well enough for smaller ones. Including a timestamp in the key makes it fairly unique.
This would handle both initial requests and refreshes of the page.
There is nothing you can do about users hitting the back button. If the page gets served from the client cache, the server knows nothing about it, and can not issue a unique id.
Why the requirement? What are you trying to accomplish by doing this?

Black line down middle of copies from Auto Document Feeder. Canon mx922.

When printing copies through te Auto Document Feeder (the feeder on top) of my Canon mx922, a black line appears down the middle of the page. How do I clean the ADF/ fix this problem? Thank you.

Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to have a line down middle of page betw 2 columns but...

Similar Messages

Maybe you are looking for