How to have a UILabel with dynamic height?

Hi, I have a UILabel which I created it programmatically. This UILabel consists of dynamic data and has line break. I tried setting this to my UILabel:
CGRect cuisineRect = CGRectMake(94, 66, 180, 50);
UILabel *cuisineStr = [[UILabel alloc] initWithFrame:cuisineRect];
cuisineStr.numberOfLines = 0;
cuisineStr.lineBreakMode = UILineBreakModeWordWrap;
If the UILabel text is higher than 50, it'll be cut off, without word wrap. Is it that I should set the init with position only, without the height and width?

Try implementing this method:
- (CGFloat)tableView:(UITableView*)tableView heightForRowAtIndexPath:(NSIndexPath*)indexPath;
You'll learn more if you figure out how to use it on your own or with google. If you come up empty, I'll show you some example code.
-Phil

Similar Messages

How to have a table with table headers eventhough table is into Scrollpane?

How to have a table with table headers eventhough the table is placed in the scrollpane?
This is because when i place my jtable into the scrollpane the table headers aren't showed.
I have read that i need to override:
configureEnclosingScrollPane() from jtable.....and with:
JViewport viewport = scrollPane.getViewport();
viewport.getView()
i think that i can reach it....but i don't know how to integrate it...to reach to have my jtable into a jscrollpane wiht the same headers of my jtable......
Could somebody help me please?......
Thanks,
Mary

How to have a table with table headers eventhough the table is placed in the scrollpane?
This is because when i place my jtable into the scrollpane the table headers aren't showed.
I have read that i need to override:
configureEnclosingScrollPane() from jtable.....and with:
JViewport viewport = scrollPane.getViewport();
viewport.getView()
i think that i can reach it....but i don't know how to integrate it...to reach to have my jtable into a jscrollpane wiht the same headers of my jtable......
Could somebody help me please?......
Thanks,
Mary

Report Formatting with Dynamic Height Header/Footer

I need to generate a printable report (pdf if possible) with a:
1) Header - Dynamic Height based on recordset output
2) Body - Recordset output, may carry over to multiple pages
3) Footer - Dynamic Height based on recordset out
In short, the whole page is dynamic- The header and footer need to be on every page and whatever height is left over to fit within the print area goes to the body and the line item output of each record (think invoice). Then the number of pages will depend on how long it takes to output the body recordset (but the header and footer MUST be on each page).
I have been trying to get this to work using cfdocument since CF7 and have never had any luck. It has not worked due to the reason that since the header and footer are dynamic height, I do not have any way to set the margins properly on page generation (so it shrinks the header or leaves excess whitespace).
Anyone recommend the best way to go about this? I have heard about the report builder and am not sure if that will fit these requirements. I appreciate any assistance!

When the footer goes to the 2nd page the page subform is incremented so you will have to reference the page subform as well. I suggest that you add a button (this is for a test only) to the footer subform and add the code app.alert(this.somExpression). Now render the form and make sure the footer stays on one page. Hit the button and take note of the someExpression. Now add enough rows to force the footer to a new page. Hit th ebutton again and take note of the changed somExpression. So to solve your problem you will have to find out which page your footer is on. and then construct your expression to incorporate this chane in expression. Note that the indexes are 0 based but the page numbering is 1 based.
Hope that helps
Paul

How to convert internal table with dynamic fields to XML

Dear all,
I met a problem like the following:
The aim is to transform the following parameter to XML
IT_FIELD stores the dynamic filed name of the internal table,with these fields, the dynamic internal can be created by cl_abap_tabledescr=>create(it_field)
IT_VALUE stores the value of the internal table dynamically created with dynamic fields.
For example
IT_FIELD =>
line1: FIELD1
line2: FIELD2
line3: FIELD3,
three lines in this internal table.
dynamically created internal table structure FIELD1 FIELD2 FIELD3
And IT_VALUE=>
1 2 3 (First line)
11 22 33
two lines of data.
Do you have any idea about how to transform the IT_VALUE to XML here? And also the transformed XML to the IT_VALUE.( we may need remember IT_FIELD here for later XML to IT_VALUE.)
Hope I describe the problem clearly.
Any inputs will be appreciated.
Edited by: Max Tang on Jan 12, 2009 3:46 PM
Edited by: Max Tang on Jan 12, 2009 4:14 PM

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

How to save a variant with dynamic selections parameters

Anybody knows how to save a variant for an ABAP that uses a Logical database with Dynamic Selections?
Have a look for example to the following:
SE38 - DEMO_PROGRAM_GET - Execute - Shift F4 - Connection Number.
How to save 0820 as Connection Number?
Function Group SVAR seems good but FREE SELECTIONs are not easy to manage...

Hello,
I tried to save the variant of DEMO_PROGRAM_GET with dynamic selection field (Connection Number) filled. It gets saved without any problem. Just click 'SAVE' and enter the variant name and description.
Thanks,
Venu

How to call javascript function with dynamic data in display tag

Hi,
Iam new to pagination concept. Iam using display tag to display rows in jsp by strtus.
I have a problem when calling the javascript function using ahref in attribute in display tag.
<bean:define name="form1" property="EditDetails.List" id="ListDisplay"/>
<display:table name="pageScope.ListDisplay" cellpadding="0" cellspacing="1" pagesize="10" partialList="false" size="listSize" requestURI="">
<display:column property="poNo" href='javascript:searchEditDetails("./submitOrder.do? actionID=getMISLoadEdit&poNumberSel=<%=((com.po.bean.EditDetails)poListDisplay).getNo()%>&statusIdSelected=<%=((com.po.bean.EditDetails)ListDisplay).getStatusId()%>")'
title="Number"/>
<display:column property="strDate"title="Date" />
<display:column property="orderValue"title="Order Value(INR)"/>
<display:column property="stringRequestedDeliveryDate"title="Suggested Delivery Date"/>
<display:column property="statusDescription" title="Status" />
</display:table>
The above code display the data in row format is working fine when I click the No It thow javascript error and its not redirecting to the other page.
When I try this with ordinary struts its working fine the code is:
<logic:iterate id="polist" name="Form1" property="EditDetails.List" indexId="i" type="com.bean.EditDetails">
<tr>
<td ><a href="javascript:searchEditDetails("./submitOrder.do?actionID=getMISLoadEdit&NumberSel=<%=((com.bean.EditDetails)polist).getNo()%>&statusIdSelected=<%=((com.bean.EditDetails)polist).getStatusId()%>")"><html:hidden name="polist" property="No" write="true" /></a>     </td>
<td><html:hidden name="polist" property="strDate" write="true" /></td>
<td><html:hidden name="polist" property="orderValue" write="true" /></td>
<td><html:hidden name="polist" property="stringRequestedDeliveryDate" write="true" />     </td>
<td><html:hidden name="polist" property="statusDescription" write="true" /></td>
</tr>
</logic:iterate>
Please help me how to call javascript with dynamic data.
Thanks in advance

The ADF Mobile Container Utilities API may be used from JavaScript or Java.
Application Container APIs - 11g Release 2 (11.1.2.4.0)

CreateTextfield with dynamic height?

Is it possible to use createTextfield with a fixed width, but
without defining height, so that it will size according to the
amount of text loaded into it from XML? I would like to do this so
that I can get the _height property at runtime to use for custom
scrolling of the text field. Thank you in advance!

So, if I can't have dynamic height, (assuming no reply
probably means "no" ;) ) I decided I would at least make it so the
height can be defined from the XML file. I added an "h"= 300;
attiribute to the node that contains the text in the XML file.
Everything loads properly and traces just fine, but when I try to
create the text field, nothing is there. I must have some wrong
syntax or something,or perhaps I have to define a font differently.
My font is in the library and linkage is set for exporting for
actionscript. Could someone be so kind as to take a look and see if
anything is obviously wrong? Thanks!

How to create a report with dynamic no of columns

Hi All,
we have a report with 6 columns.
and its been access by 10-20 people.
the user dont want to have a fix report with 6 columns rather they want to have a flexibility to select the columns from the report they want to see.
i.e. user one one time wasnt to see only one columns
another time he want to see only column 2 and 4 of the report.
its like there can be a multiple select option from where he can select the columns in the existing report and then see the same report with only that much column.
Please tell me how to implement it.

Abhip i thin you didnt get the problem.
there is s exeiting report with 6 column
Currently when i logging to OBIEE and see that report
i will be getting report with 6 column
but now i want a flexibility of selecting only 2 or 3 or 1 or 4 or 5 as i wish columns from this report and see the result only for that
so is there by any chance i can have a check box for each column which i can check in dashborad to select that column
and show the result were as by default it will show the report with 6 column.
Thanks

How to schedule a report with dynamic parameters

We need to schedule a Webi report with dynamic parameters then email the different result to different email groups. Is it possible to do this in scheduler? Please advise. Thanks.

there are 2 schedulers
1st CMS
the reports which does not have any input parameters, only then t can be scheduled in CMS
2nd in Infoview
if report has input parameters and if you want to schedule it, then you may need to schedule the report from Infoview
To have a email notification
configure the SMTP server in report JOB Server
Thanks,
Ganesh

How to have one provider with multiple portlets in JDev 11g

Hi,
I am trying to create Oracle PDK Portlets using JDeveloper 11g but for each portlet JDeveloper is creating a provider. As In JDeveloper 10.1.3.4 we can have one provider with multiple portlets in it. But JDev 11g creates provider for each portlet. How can we have one provider with multiple portlets in JDev 11g. Is it something changed in 11g version or am I doing it wrong. As the Help says we can have multiple portlets in one provider but when creating portlets it does not do that. Any help is appreciated.
Thanks

Hi,
I am trying to create Oracle PDK Portlets using JDeveloper 11g but for each portlet JDeveloper is creating a provider. As In JDeveloper 10.1.3.4 we can have one provider with multiple portlets in it. But JDev 11g creates provider for each portlet. How can we have one provider with multiple portlets in JDev 11g. Is it something changed in 11g version or am I doing it wrong. As the Help says we can have multiple portlets in one provider but when creating portlets it does not do that. Any help is appreciated.
Thanks

How to use a queue with dynamic data

When using a collector I have found that it significantly slows down my loop times. I am using LabView7.1 on a Dell PC with Windows XP. If I use a queue with dynamic data do you think that will require less of my processor and allow for faster loop speeds?
I have created a queue using dynamic data in one loop and I want to retrieve all available samples each iteration in a slower loop. If I use the flush queue I get a 1d array of dynamic data. What is the best way to convert the 1d array of dynamic data so that the array of dynamic data is consolidated back into a single dynamic data type? Any help would be much appreciated.

Hi Dennis,
You could for instance wire the array to an auto-indexed for loop. I attach an example. I assume you wish to concatenate the arrays a singel waveform.
Hope it helps,
Pelle S
District Sales Manager
National Instruments Sweden
Attachments:
Dynamic queue.vi ‏245 KB

How can I create banners with 100% height?

I want the homepage to load with 100% height and there buttons that anchor to sections further down the website that I also want to be 100% height when scrolled to.

3rd post on same question by same user :
Re: how can I Create function with an out Parameter
how can I Create function with an out Parameter

How to have spam included with my mail

I bought an ipod touch 4, and it works great. There is only one problem. When I check the apple mail, it doesn't mention the spam folder there at all. Sometimes I get messages from people that go through spam. I don't want the hassle of turning the computer on every time to check if there are any messages in my spam folder. Is there a way to have it included with the mail on my ipod touch. If yes, how to do about it?

Go to your provider's webmail using Safari and check there. Or go to webmail on your computer and turn off the spam filter. Instructions for doing that would be on your mail providers webmail site's Help link.

How to do parallel processing with dynamic internal table

Hi All,
I need to implement parallel processing that involves dynamically created internal tables. I tried doing so using RFC function modules (using starting new task and other such methods) but didn't get success this requires RFC enabled function modules and at the same time RFC enabled function modules do not allow generic data type (STANDARD TABLE) which is needed for passing dynamic internal tables. My exact requirement is as follows:
1. I've large chunk of data in two internal tables, one of them is formed dynamically and hence it's structure is not known at the time of coding.
2. This data has to be processed together to generate another internal table, whose structure is pre-defined. But this data processing is taking very long time as the number of records are close to a million.
3. I need to divide the dynamic internal table into (say) 1000 records each and pass to a function module and submit it to run in another task. Many such tasks will be executed in parallel.
4. The function module running in parallel can insert the processed data into a database table and the main program can access it from there.
Unfortunately, due to the limitation of not allowing generic data types in RFC, I'm unable to do this. Does anyone has any idea how to implement parallel processing using dynamic internal tables in these type of conditions.
Any help will be highly appreciated.
Thanks and regards,
Ashin

try the below code...
DATA: w_subrc TYPE sy-subrc.
DATA: w_infty(5) TYPE c.
data: w_string type string.
FIELD-SYMBOLS: <f1> TYPE table.
FIELD-SYMBOLS: <f1_wa> TYPE ANY.
DATA: ref_tab TYPE REF TO data.
CONCATENATE 'P' infty INTO w_infty.
CREATE DATA ref_tab TYPE STANDARD TABLE OF (w_infty).
ASSIGN ref_tab->* TO <f1>.
* Create dynamic work area
CREATE DATA ref_tab TYPE (w_infty).
ASSIGN ref_tab->* TO <f1_wa>.
IF begda IS INITIAL.
    begda = '18000101'.
ENDIF.
IF endda IS INITIAL.
    endda = '99991231'.
ENDIF.
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
      pernr           = pernr
      infty           = infty
      begda           = '18000101'
      endda           = '99991231'
    IMPORTING
      subrc           = w_subrc
    TABLES
      infty_tab       = <f1>
    EXCEPTIONS
      infty_not_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    subrc = w_subrc.
ELSE.
ENDIF.

How to create a report with dynamic columns

Hi all,
I am using Apex 4.0 with Oracle 10g
I am creating a report and I need to display columns dynamically based on the item values.
example:
I have a table employee with columns name, designation, sal
In the report page i have a select list with designations and when I select a designation from the select list,
I need to display the names of the employees horizontally,
like each name as a new column in the report with that particular designation. and same has to continue when I select different designations.
Can some one help me how we can do that.
I appreciate your answer
Thanks,
Rik

Essentially you want to write a pl/sql function which returns a varchar2 string. The contents of the string must be a valid sql statement.
Once you have done this, you need to add a report region as type sql report and you will have the option of writing it as a query or as a function returning query. Choose function returning query and enter in the function call.
Note your function must be valid, and must be executable by your apex parsing schema.
example:
create or replace
function test_report( p1_tablename in varchar2)
return varchar2
is
v_query varchar2(4000);
begin
v_query :=
'SELECT * from '||p_tablename;
return v_query;
end test_report;Edited by: Keith Jamieson on Aug 15, 2011 4:50 PM

How to have a UILabel with dynamic height?

Similar Messages

Maybe you are looking for