How to have the Date and Time appear on printouts

The Date and Time used to appear (at the bottom right) on things printed from websites. For example, receipts from an online purchase, an article on the web etc.
I am able to see the setting to appear at bottom right (in the "File" dropdown).
Following a Firefox update, I no longer get that very useful "Time & Date Stamp".
This is very frustrating. Can anyone help?
Thanks,

Are you saying you can see the date and time in the "Print Preview" or in the "Page Setup" dialog under the "Margins & Header/Footer" tab. The date and time won't display if it is not set correctly in the "Page Setup" dialog. Also, is this on one specific printer or many different ones? If this is only happening on one printer there may be a problem with the print driver, even though there would be probably more serious things going on than a missing footer. You could also experiment and create a pdf using "PDF Creator" at http://www.pdfforge.org/pdfcreator and see if it comes up on the created document.
Hope this gives you some headway.

Similar Messages

Camileo S20 - How to display the date and time

Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

Hi,
of course, I did it repeatly, it is written in my question above. I am not stupid.
This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

How to find the Date and Time of Modification of Column in aTable?

Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar M

I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

How to capture the date and time of a background job

Hi experts,
How to capture the date and time of a background job?
How to find whether it is runned succesfully or not?
If it is not successful how to put error message?
ASAP
Thanx in advance,
Sudha

To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
    WHEN 'S'. WRITE: / 'Scheduled'.
    WHEN 'R'. WRITE: / 'Released'.
    WHEN 'F'. WRITE: / 'Completed'.
    WHEN 'A'. WRITE: / 'Cancelled'.
    WHEN OTHERS.
ENDCASE.

How to read the date and time information of a file by labview

how to read the date and time information of a file by labview? for example, created time and modified time.
Solved!
Go to Solution.

if you need to know the last modification date of file:-
"Functions->File I/O->Advanced File Functions->File/Directory Info.vi"
This vi returns the value of file's last modification date. This is returned as U32 number. To see it in MM/DD/YY format you must create the indicator, right-click on it and select "Format & Precision" item from drop-down menu. Then select "Time and Date" format there.
Thanks as kudos only

How can i have the date and time show up on my canon vixia hf m50

Cannot get the date and time to show up onscreen in ANY videos on my new vixia HF M50. Can somebody help me on this?

Hello Jerrysulew,
You can show the date and time using the Captions option. The process is described below.
Add a new level of enjoyment to your scenes by decorating them. You can add animated graphics, stamps and even your own freehand drawings. The supplied stylus pen will be especially useful for decorating scenes.
You can decorate scenes as they are being recorded.
IMPORTANT
The screens and settings that appear may differ depending on the model you are using.
NOTE
You can open the decoration screen when the LCD panel is stowed with the LCD screen facing away from the camcorder. In such case, make sure [Autostart Decoration] is set to [On].
Decorating Scenes while Recording
1. Touch [
2. Touch [Decoration].
3. The decoration mode screen appears.
On the decoration screen, there is a canvas where you can draw freely, and a toolbar with tools lined up for creating your drawings.
Select the tool you want to use from the toolbar, and make drawings on the canvas.
Icon
Tool name
Function
Pens and Stamps
Select the type of pen or stamp and its color. You can also save a canvas or load a previously saved canvas.
Animated Stamps
Select animated stamps to add to your decoration.
Captions
Add the date, date and time, story title* or story theme* as a caption that will be included in the recording.
Image Mix**
Choose one of 27 different frames to add onto the canvas. Image mix can be used in combination with the pens, stamps and animated stamps.
Freeze screen**
In recording mode: pause the live video. Touch [
again to restore the live video. You can add decorations to and record the frozen image.
In playback mode: pause the playback. Touch [
] to resume playing back the scene.
Minimize toolbar
Minimize the toolbar to the top of the screen to view almost all of the canvas. Touch [
] to restore the toolbar.
* Not available in
mode.
**Not available in
mode and for MP4 movies.
4. Use a tool from the toolbar as explained in the following procedures.
5. PressYou can add decorations even while recording a scene.
6. Touch [
] to exit the decoration screen.
NOTE
For AVCHD movies, decorations will appear in the thumbnails of scenes in the [ AVCHD Movies] index screen and gallery. For MP4 movies, decorations will not appear in thumbnails.
To use [Pens and Stamps]
1. Touch [
The [Pens and Stamps] screen will appear.
2. Select the desired pen or stamp from [Tools].
Select Colors.
Touch [
Select white or black from [Colors].
Alternatively, you can touch [
] and select a color from the displayed colors.
3. Draw freely on the canvas.
Touch [
] > [Clear] > [Yes] to clear the canvas and start again.
NOTE
The canvas with decorations can be deleted, saved, and loaded.
You can save the decorated canvas right after a decorating action.
If the memory that contains the canvas is initialized, the canvas will be deleted.
To use [Animated Stamps]
1. Touch [
2. Touch one of the control buttons.
3. Touch anywhere on the canvas to place the selected animated stamp. You can also drag some animated stamps to a different location.
NOTE
When the [Animated Stamps] tool is used, the date/time will not be displayed or recorded.
To use [Captions]
1. Touch [
2. Touch [Date] or [Time].
When recording a scene using Story Creator, you can also select [Title]
(the story&&&&&&&&&s title) or [Story Scene] (the story scene category).
3. Select the desired text settings and touch [
Touch [
] (white text on dark background), [
] (white text) or [
] (black text).
Touch the caption and drag it to the desired location.
To use image mix
1. Touch [
] to open the [Select Image] screen.
2. Touch [ON].
3. Touch [+] or [-] to select a different image mix frame.
You can touch one of the memory icons at the bottom of the screen to read image mix frames saved on a different memory (When recording on or playing back scenes from a memory card).
Touch [
] to mix the selected frame with the live video.
NOTE
When [Rec Media for Movies] is set to [
] (the built-in memory), you will not be able to select image mix frames saved on a memory card (For camcorders that have internal memory only).
For AVCHD movies, image mix cannot be selected during playback or while converting a scene to standard definition (For camcorders that have internal memory only). Select the image mix during playback pause or before starting the conversion.
To use freeze screen
1. Touch [
The control button will change to [
] and the picture will be frozen.
Decorate the screen using the other tools in the palette.
2. Press the
The decorations created will be recorded with recording scenes that are on pause.
Press the
Touch [
]. The screen will return to normal.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I import photos from a memory card that didn't have the date and time set yet?

Aloha,
So I got a new 5dmark 3 and I was shooting a wedding and didn't set the date and time before I started shooting. When I uploaded the images to Lightroom they uploaded all over the place and not in order. Is there a way to upload to lightroom and keep them in order?
THanks so much,
Eric

You can change the sort order to filename. That's what I prefer to use, and it keeps my images in shooting order.

How to check the date and time when a material is blocked

Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
Priyanka

Hi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba

Apple Remote Desktop - how to change the date and time server ip address?

Our imacs keep getting out of synch with our Windows Active Directory server and when they do, users can no longer log into the imacs. The imacs this morning were more than 5 minutes fast, for example.
So, we have changed the date and time server on one of our imacs to our internal time server and that works fine. Now I would like to update all of the other imacs using a unix command in ARD. Can anyone tell me how to send this change? For this message, let's say our internal time server is 172.30.100.100

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

How to get the date and Time?

Hi,
I am using Jdev 11.1.2.0.
I had one database table. In that table one variable as bgnDtm and the datatype as oracle.jbo.domain.Timestamp. In my Impl class I declare one variable as beginDate(DateType as oracle.jbo.domain.Date).
Now I am using the conversion as beginDate=(Date) SampleVO.getAttribute("bgnDtm ");.If I using this scenario I got the Type cast error. so how can I separate Date and Time value.
So how to do. Please provide some suggestions.
Regards,
Ragu.

you can get the time value either from oracle.jbo.domain.Timestamp or from oracle.jbo.domain.Date
oracle.jbo.domain.Timestamp timeStampDate = (oracle.jbo.domain.Timestamp) SampleVO.getAttribute("bgnDtm");
Time time;
        try {
            time = timeStampDate.timeValue();
            System.out.println(time);
        } catch (SQLException e) {
            e.printStackTrace();
        java.sql.Date sqlDate=timeStampDate.dateValue();
            oracle.jbo.domain.Date jboDate=new oracle.jbo.domain.Date(sqlDate);
        Time timeValue = jboDate.timeValue();
        System.out.println(timeValue);Edited by: M.Jabr on Dec 23, 2011 1:55 PM

How to set the date and time format from Windows Server 2008 R2

Hi,
I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
Yoshika04

Hi,
In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
time format. For more information, please refer to:
Regional Options Extension
http://technet.microsoft.com/en-us/library/cc754496.aspx
Regards,
Bruce

How to find the date and time difference in InfoPath 2013?

Hi All,
My date and time format is like: 2013-12-24T10:47:38 and have three fields Start date, End date and Actual time taken.
If start date and end date filled then actual time taken field should automatically should fill, for example 2 days 12 hours 48 min 3 sec.
How to achieve this?

Hi Sam,
I believe we had discussed the same issue in the below thread. Can you please refer the below one?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
If it's not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

How to change the date and time during OVM installation for Fusion Apps

Hi,
The customer is using Fusion Instance which is a V1 (Build 19) OVM installation shipped by Oracle with Demo Data (including seeded user IDs and roles) in it.
Now they have issue with Date format for the application on the screens is showing MM/DD/YYYY where as it should be (Singapore) Standard is DD/MM/YYYY.
Q/A: How to change the date/time in OVM image
Refer SR : 3-5640792461
Regards
Ganesh Ananthapadmanaban

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

How to delete the date and time column from a waveform spreasheet file

after acquiring a signal through the DAQ i am writing it in a spreadsheet. but for further post processing of the data the date and the time column are unneccessary. is there some way to format the file in labview so that those columns are removed. the DAQmx read gives as output a 1 d array. so i could not find a way to select only the Y column

If you are getting a 1D array from the DAQmx Read, then you don't have any date/time information to write and if you are using the Write to Spreadsheet File, there should be no way you can have the date/time information in the file. Whatever you hjave programed to put the date/time into the file, don't do it.
p.s. You may not think you need timing information but for a lot of post-processing, it is essential to have. If it's in the file, you can always ignore when you read it and if you later find out it's necessary, it will already be there.

How to find the Date and time of Installation of Oracle in Windows?

Hi ,
Is there any way to find the installation Date and time of Oracle in Windows?
Regards
Rajesh

If you have never recreated/restored/reincarnated the database, then CREATED column from v$database should tell you when you created the database.
If you are looking for the date/time of installation of Oracle home, check the logs under OraInventory.
Reply by Satish sir at following link:
installation date/time of a database !!
Hth
Girish Sharma

How to have the Date and Time appear on printouts

Similar Messages

Maybe you are looking for