How to hide a warning message in Record working time

Hi,
I am entering working hours which is greater than actual planning hours in Record Working Time and if i click on Review it throws warning like
Number of hours recorded 14,00 exceeds target hours 7,50
I dont want to show this warning message
Please let me know how to do that
Thanks
Bala Duvvuri

Nachy,
we can enhance this FM and use one of the user exits
CATS0001 CATS: Set up worklist
CATS0002 CATS: Supplement recorded data
CATS0003 CATS: Validate recorded data
CATS0004 CATS: Deactivate functions in the user interface
CATS0005 CATS: Customer field enhancements
CATS0006 CATS: Validate entire time sheet
CATS0007 CATS: Subscreen on initial screen
CATS0008 CATS: Determine workflow recipients for approval
CATS0009 CATS: Customer-Specific Text Fields in Data Entry Section
CATS0010 CATS: Customer-Specific Text Fields in Worklist
CATS0011 CATS: Customer functions
CATS0012 CATS: Subscreen on data entry screen
Thanks
Bala Duvvuri

Similar Messages

Rule Groups in Record Working Time- Differnt attendances for different emp

I have a requirement. I have 2 different set of employees Salaried and Hourly. In record working time these 2 different set of employees should have differnt set of attendance types in the drop down. I know in Leave request this can be achieved via Rule Groups and WEBMO, but how do I do the same in Record working Time?

I can recommend better to use User exits or build a custom search help or a check depending upon employees criteria
Now in CATS WD as you are aware uses different search help
ie CLASS CL_XSS_CAT_RFC_COMMAND_TOOLS method BUILD_F4_HELP
SAPLHRXSS_CAT_WEBDYNP / LHRXSS_CAT_WEBDYNPU02
FUNCTION / HRXSS_CAT_WD_F4_AWART
This would be straight forward. Using authorisation would be tough to implement

How to remove browser warning message in HTML 5 Cap 8 projects?

How to remove browser warning message in HTML 5 Cap 8 projects?

My conclusion after a morning struggling with this, is that there's no point in suppressing the message if your html5 content then goes on to misbehave in Firefox (like mine does). I've chosen to keep the popup, but change the wording to refer Firefox users to a completely separate Flash version. The wording of the popup is also in CPM.js.
Before you all shout at me, no I can't use the multiscreen.html approach, because my Flash version will have to be non-rescaleable, because web objects don't rescale in Flash.

How to Convert the Warning Message to Error Message in Standard Transaction

Hi,
I face one problem in Standard Transaction Code CS02. In that by entering the material Number, Plant, bomstatus press enter. it gives a warning message. How to convert the Warning message to Error. In abap how to do that. Please help me.

Mohan,
It appears that there is some configuration you can do for BOM Message types to change the message type. The IMG link for this function is:
Production->Basic Data->Bill of Material->General Data->Change Message Type
However you need to read the IMG documentation to see if this will work for you. There are only certain messages that can be changed with this configuration step.
Also, please do not double post questions in the forums.
Best Regards,
Chris H.

How to suppress a warning message in BDC call transaction

Hi,
I was calling a BDC using CALL Transaction in mode N. But due to some warning messages the background job was not success. Please tell me how to overcome the warning messages in BDC.
Regards,
Satish

Hi tyr this way:
PERFORM bdc_dynpro      USING 'SAPMM07M' '0210'. " into the screen
      PERFORM bdc_field       USING 'BDC_CURSOR'           "cursor on the filed to update
                                    'DM07M-HSDAT_INPUT'.
      PERFORM bdc_field       USING 'DM07M-HSDAT_INPUT'   "assign values
                                     v_date.                                     "might get an warning so three enters...
      PERFORM bdc_field       USING 'BDC_OKCODE' " first enter
                                   '/00'.
      PERFORM bdc_field       USING 'BDC_OKCODE' "second enter
                                    '/00'.
      PERFORM bdc_field       USING 'BDC_OKCODE' "third enter
                                    '/00'.

How can I disappear warning message~?

I'm using R12.
And I don't want to see warning message.
like that
!Warning
The search could not be completed because data is not staged or this match rule is not compiled: HZ_ORG_SIMPLE_SEARCH_RULE. Plese contact your sys admin...
I inserted data using by API.
And I'm staging by concurrunt manager per 1 min...
When I inserted some data using by API, that message is occured.
but it would be disappeared later in 1 minute.
How can I disappear warning message~?
I think there is a something what I can setting . somewhere....but I don't know where it is...
like warning, error, critical....
plz let me know~

You will need to set appropriate profile options - pl see MOS Doc 565905.1 (FAQ on the setup/usage of DQM Profile Options for OCO and Receivables)
HTH
Srini

How to clear the Warning Messages

Hi Friends,
How to clear the warning messages, The requirement is I am preparing some warning messages in page1 , and based on some button user will be navigated to page2. In page2 If user clicks on Save button I am displaying the warning messages which are preared in first page(Code snippet shown below) when user trying to navigate to first page .
addWarningMessage("",new Object[]{});
Thanks in Advance

Hi Frank,
Yes you are right, The warning message is being displayed on Page2 when user clicked on 'Save' button on Page2. The Code snippet is being executed in ServiceImpl class when user clicks on the Save button.
Basically, I am validating the Page1 data and Page2 data on Page2 when User clicks on the Save button on page2.
Thank you !!

Hide showork list in Record working Time

Hi,
We dont want to display "show orklist" link in record working time iView. Please let us know how we can hide this field.
I have checked this as hide in settings from CAC2. But still the field is coming but there is no data under this. I want to hide(remove) this completely from iView. Please suggest me.
Thanks in advance.

Hi Bala,
Does it mean I have to change this by editing the iView in NWDI and apply the personalization. I have tried this from executing the Iview then select personal from the right top, but I have not seen any properties there.
It is shwoing "Object has no editable properties".
Please suggest.
Thanks,

How to restrict the dropdown values in Att/abs type in Record Working Time

Hello experts,
We are implementing ESS business package. In the Record Working time, within the Weekly View and Daily View tabs, there is a column Att/abs.type which has several drop down values - like: floating value, Funeral Leave, Military Reserve, Regular Attendance, etc. Our requirement is to restrict the dropdown values by means of showing only one of these values (say: Regular Attendance) and others should not be shown. How do we achieve this?
Thanks
Vicky R.

Hi Siddarth,
Thanks for the info. By the way, this table info is not mentioned in the Business Package documentation. Which documentation are you referring to?
Thanks
Vicky R.

How to change the text under RECORD WORKING TIME IN ESS.

Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.

Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy

How to change colors for record working time calendar

Hi,
I would like to change the colors in the calendar displayed in record working time based on some conditions.
How do i do that is there any BADI associated with that
Thanks
Bala Duvvuri

Hi Bala ,
Yes its possible to change that .
You need to implement BADI for this ..
BADI name : "PT_ABS_REQ"
In the BADI "PT_ABS_REQ" interface "IF_EX_PT_ABS_REQ" you can find the method
"SET_CALENDAR_COLOR" in that you can set the colure for the Absent type ......
Adjust Colors of Calendar and Team Calendar
Functionality
You can use this method to change the colors in the team calendar.
In the standard system, the different statuses for requests have different colors. You can use this method to differentiate the colors of requests depending on the following aspects:
Status of requests (status)
Action that an employee has executed: new request, delete, change (UIA operation)
Subtype of absence (SUBTY)
Full-day or partial-day absence (BEGMT, where BEGMT = 0 signifies a full-day absence)
Application mode ( mode). You specify the application mode in the Select Employees for the Team Calendar IMG activity.
Color Display of Status of Leave Requests(COLORS_ACTIVE). You specify this status in the Specify How Leave Is Displayed and Default Values IMG activity.
Available Colors
You have a choice of 16 colors. The 16 colors are hard coded, that is, you cannot change them or add other ones.
The available colors are stored with their RGB value as constants of the CL_PT_REQ_CONST class. Use these constants if you want to change the colors.
Notes
If you change the colors in the team calendar, you should also adapt the legend accordingly. You can use the Adjust Legend for Calendar and Team Calendar method to do so.
Hope this work!!!

How to implement Manager Selfservice - Recording Working Time - BP

Hi!
I would like to have a stepby step approach to implement business package for recording working time.
What I need is the following information?
1. Pre-requisites
2. How to create the iview ?
3. What R3 configurations need?
you can email if you have good documentation on this to [email protected]
Thank you
Ramesh

The primary limitation you will encounter when trying to do high speed
digital I/O using your E-Series hardware is that the digital lines are
all software timed. This means that for each and every digital
read it is necessary for your software to issue a command to your
hardware, read a single point, then receive the response from the
board. This prevents you from performing digital operations at
very high speed. In general, I would say that 100 microseconds is
a very good response using software-timed digital I/O on a Windows
computer.
It is difficult to make a good recommendation without more detail about
what you are trying to do. You may need to consider switching to
a Real-Time operating system, or upgrading your DAQ hardware to a board
that will allow you to time your digital acquisitions on the board
itself. These devices, such as the m-Series DAQ or the PCI-653x
series, would allow you to use hardware triggers for your digital
acquisitions, change detection, and buffered data acquisitions to
reduce the software overhead involved in a rapid acquisition.

How to Add extra feilds in Advance Search of Record Working Time

Hi All,
My requirement is in Standard RECORD WORKING TIME ESS application.
under weekly view, when we press F4 it will display advanced search.
in that advance search there are *CO Area: Short ID: WBS Element: Description: * areas.
abaper have created two more fields for search as per requirement.
now i have to include those those fields in to that advance search view along with the other fields.
please help me its very urgent.
thanks in advance.

i found that,
We have to check the backend customisation and add those filelds as visible in the cats profile using cac2
and check the exits.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/bd/53fa2fcc43594dbf9f406c18989a47/frameset.htm
can anyone please tell me Step By Step process how to enable them using CAC2 .

ESS Record Working Time - How to set up approvals?

Hello experts,
I've hit a bit of a roadblock and could use some direction. I have recently implemented the newer ESS_WDA role in our sandbox environment to see what it had all to offer. Using LPD_CUST to customize the ESS launchpad role, instance = menu, I have successfully implemented the Record Working Time WD application and have it running fine. Using CAC1 I created two profiles, ESS (without approvals) and Z_ESS_A (with approvals). Using the ESS profile, a user can enter time into their ESS time sheet, save, and thus time is entered into CATS and their IT2001/2002.
Now, Z_ESS_A is another story. Some time this year, we'd like all our US administrative personnel to enter time using ESS Recording Working Time (HRESS_A_CATS_1) however, they would need to have all their time approved by their reporting manager (or a backup) before it goes into IT2001/2002.
I'm a bit fuzzy on the process, but I would like the approval to be done by their reporting manager in Manager Self-Service using the Approve Time Sheet application (HRMSS_A_CATS_APPROVAL) and not by click on some link in their UWL. I assume this is set up by assigning a task in the workflow section under Approval in the data entry profile, but I have no idea what task to assign. Do we need to create a custom task? Am I on the right path or is there another path I should be pursuing? Ideally, if the manager is unable to approve the associate's time sheet, we would have a backup enter their MSS and approve time sheets that haven't been approved by the direct manager yet.
I did notice the Approve Working Time section in the IMG. Is this where I need to set up the approvals? I noticed a SAP_LINE view, however I read this uses a line manager relationship dictated in OM, however we do not use that relationship (A002/B002). We simply use the A003 (Manages/Belongs to) relationships, thus the task would identify the chief of the org unit and use that relationship to decide who to send the time sheet approval to.
Kind regards,
Garrett Meredith

Hi Garrett,
System identified the Record working time profile from the value against User Parameter CVR in SU01.
If you maintain ESS against CVR it triggers without approval
If you maintain Z_ESS_A against CVR it triggers Approval process
Some time this year, we'd like all our US administrative personnel to enter time using ESS Recording Working Time (HRESS_A_CATS_1) however, they would need to have all their time approved by their reporting manager (or a backup) before it goes into IT2001/2002.
You need to change the CVR parameter value to Z_ESS_A for that period for all US administrative employees for that duration. Again you need to change it to ESS once that duration is over.
but I would like the approval to be done by their reporting manager in Manager Self-Service using the Approve Time Sheet application (HRMSS_A_CATS_APPROVAL) and not by click on some link in their UWL.
Below tick in CAC1 triggers workitems to UWL, if not only sent to Approve Time sheet application in MSS.
I did notice the Approve Working Time section in the IMG. Is this where I need to set up the approvals? I noticed a SAP_LINE view,
SPRO / PM/ ESS WDABP / Working Time/ Record working time/ Approve Working Time
above is the navigation where you configure approval process.
SAP_LINE is also a user parameter for managers in SU01 against CATS_APPR_PROF.
So Employee SU01 - CVR = ESS or Z_ESS_A
Manager SU01 - CATS_APPR_PROF = SAP_LINE or Custom one.
however I read this uses a line manager relationship dictated in OM, however we do not use that relationship (A002/B002). We simply use the A003 (Manages/Belongs to) relationships, thus the task would identify the chief of the org unit and use that relationship to decide who to send the time sheet approval to.
It doesn't work based on A002/B002 relation, it works based on Chief Relation (A012/B012) to Org.Unit.
Let us say X is the chief for A org.unit, all the positions those belong to A org.unit shown under X as reportee employees, so X can be the approver for A1, A2, A3 and so on.
Hope this give you an understanding.
Regards,
Srikanth Naidu

Number of rows in Record Working Time.

Hello Guru's,
IN ESS- Record Working Time - the number of rows visible are set to 8 in the Web Dynpro Java Code.
I had a look at the Note:
Note 957741 - Few lines in the data entry grid of the timesheet webdynpro
The question I had is to have more than 8 rows visible, is it Java Code modification or any other alternative to change the number of Visible Row....
Please reply back asap.
Thanks in advance for your time.
Best Regards,
Pramod

Hi Siddharth,
Thanks for the reply.
Looks like if need to change the no of rows need to do the WDJ code modifications.
Interesting to know the other details in the message.
But in the reply the interface you mentioned what for that is used,
Since when checked the where used list of the attribute it calls ADD_INITIAL_LINES_TO_TIMESHEET even in the debug it is not allowing to do the changes to value which is 6 by default.
Since the value is constant it cannot be changed.
what was your intention when you gave that reply, curious to know how would it solve the issue.
And one other questions In the Java Code
ListViewerSlim listViewer =
                    new ListViewerSlim(
                         view,
                         wdThis.getRFC_FieldList_Timesheet(),
                         "TimesheetData",
               //               listViewer.destroyAllColumnHeaders();   //XZQ110505
               theTable = listViewer.getTableControl();
               theTable.setVisibleRowCount(8); //Note SOW_957741
               //               theTable.setHeader(null);      //XZQ110505
it is set to 8 why is it different in both the cases.
Since, when we login to the Portal it shows no of rows visible as 8 not 6 as it is in the interface?
any thoughts on this.
Kind Regards,
Pramod

How to hide a warning message in Record working time

Similar Messages

Maybe you are looking for