How to hold the display steady after zooming up
After zooming up to make a document easier to read the document does not remain locked in place but moves whenever the cursor is moved. I would like to use the arrow keys to navigate up and down and left and right through the document, but after enabling zooming up the document moves complicating moving around the document and accessing commands.
Open system preferences > Keyboard and Mouse > trackpad gestures > zoom while holding > Options > check "Only when the pointer reaches an edge."
I also suggest that you have enabled two finger scroll and allow horizontal scrolling -- and then move the document via trackpad two finger scrolling.
Similar Messages
-
I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
Thanks, SaraIt seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog. -
How to hold the value in List box.
Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
RakeshHi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
if list[] is initial.
perform SHP_COND.
endif.
form SHP_COND .
*DATA: SHOP(80).
clear : GT_VSBED, list.
refresh : GT_VSBED, list.
select vsbed
from knvv AS K
into table GT_VSBED
where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
and K~vtweg = vbak-vtweg
and K~spart = vbak-spart.
select VSBED vtext
from TVSBT
into table list
for all entries in GT_VSBED
where spras = sy-langu
and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = NAME
values = LIST[]
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " SHP_COND
Thanks,
Rakesh -
How to stop the spinning ball after trying to install 10.7.3?How
How to stop the spinning ball after trying to install V10.7.3?
Boot from your recovery partition by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
When the Recovery desktop appears, reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin. -
We have a GUI swing screen in which we have navigation buttons.
when the user clicks the previous ,next, last,first buttons we have to show the records accordingly.
The min. size of the database is around 1 million.and each row has 60 columns.
Our approach is screen--->servlet-->ejb beans --->database.
since the database is huge how to hold the values, and where, without affecting the performance.
If we get the resultset it holds all the data.since the data size is huge,we are looking for a solution.The user may browse through the data ,edit the data and delete the data.
we have to perform accordingly. Also, if, for example, user1 is seeing record no.1 & user 2 has modified record no.3 in the meanwhile, when user1 goes to record no.3, he should see the
modified record. In short, the user should always see the latest values.
please give us the best approach to solve this problem.
Also this is in a multi user environment.It seems like you need to look at threads to update current values in the display and narrow the result set that you retrieve to match the criteria needed for display. You might consider making the method to change values a syncronized one.
-
How to keep the display/screen on?
how can I keep the phone display on while browsing with Firefox for android?
even if the phones default settings is set to turn the display off after 15 sec for example...
thanks allot...You would have to adjust your phone's timeout time in the settings.
-
I have three email accounts and want to know how to change the display order.
I have three email accounts and want to know how to change the display order.
Install this add on.
https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search -
The headphone jack on my iPod Touch is intermittent. I gat sound out of one channel or both depending on how I hold the jack. It is making intermittent contact. Is this a costly repair by Apple? Can I do this repair myself?
ThanksHere is a third-pary place. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
Here are instructions for doing it yourself
iPod Touch Repair - iFixit -
How to restrict the display of report variants
Hello All,
I want t know how to restrict the display of report variants.
I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
Thank you for your help in advance.
Regards,Hi,
Can you just try this
DATA:it_varid TYPE TABLE OF varid.
DATA:wa_varid TYPE varid.
INITIALIZATION.
SELECT * FROM varid INTO TABLE it_varid
WHERE report = sy-repid
and ename = sy-uname.
IF sy-subrc = 0.
LOOP AT it_varid INTO wa_varid .
CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
EXPORTING
report = sy-repid
variant = wa_varid-variant
EXCEPTIONS
variant_not_existent = 1
variant_obsolete = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
ENDIF. -
how to change the display of a spectrogram (background color).
I am using JFTA Adaptive spectrogram. Need to change the color of the background.: how to change the display of a spectrogram (background color)
Attachments:
snap.docx 23 KB -
How to disable the edit Permission after the task approval in project server 2010.
Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
How to chage the display name in SC browser for the custome fields?
Hi,
I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields?
Thanks
KevinHi Kevin,
when you have defined your customer fields, you have created new fields in the CUF structures. The labels displayed on the SC screen come from the data element you have assigned to those cust fields in the include structure.
If you have used a std data element, then you can change its translation (attention, this will impact all structures, tables... abap objects using this data element).
If you have created a Z data element, then adapt its description accordingly.
Rgds
Christophe
PS: please reward points for helpfull answers -
How to hold the values as it's not holding the values when it cross 255
DATA : fval1 TYPE edidd-sdata.
DATA : fval2 TYPE edidd-sdata.
DATA : fval3 TYPE edidd-sdata.
DATA : fval4 TYPE edidd-sdata.
DATA : fval5 TYPE edidd-sdata.
DATA : len(3) TYPE n.
values1 = wa_final-low.
values2 = wa_final-high.
IF wa_final-high IS NOT INITIAL.
CONCATENATE values1 values2 INTO fval1 SEPARATED BY '-'.
ELSE.
fval2 = values1.
ENDIF.
IF fval3 IS NOT INITIAL.
IF fval1 IS NOT INITIAL.
fval = fval1.
CONCATENATE fval3 fval INTO fval3 SEPARATED BY '/'.
ENDIF.
IF fval2 IS NOT INITIAL.
fval = fval2.
CONCATENATE fval3 fval INTO fval3 SEPARATED BY '/'.
ENDIF.
ELSE.
IF fval1 IS NOT INITIAL.
fval3 = fval1.
ENDIF.
IF fval2 IS NOT INITIAL.
fval3 = fval2.
ENDIF.
ENDIF.
DATA : len(3) TYPE n.
len = STRLEN( fval3 ).
IF len > 250.
fval4 = fval3+0(250).
fval3 = fval3+250(5).
* CONCATENATE fval4 fval3 INTO fval5.
ENDIF.
IF fval4 IS INITIAL.
wa_final1-varbl31 = fval3.
ELSE.
CONCATENATE fval4 fval3 INTO fval5.
wa_final1-varbl31 = fval5.
ENDIF.
MODIFY it_final1 FROM wa_final1
TRANSPORTING varbl31 WHERE agr_name = wa_final-agr_name.
at this point also it's not holding the values when it exseds 255
kindly please helpH friends ,
i am not the expert at the same time i know some thing in abap
fval4 = fval3+0(250).
fval3 = fval3+250(5).
in the above case fval3 have 255 char at that time iam transporting 250 char to fval4 with this statment
fval4 = fval3+0(250).
and iam keeping the remaining 5 char in fval3 with this statment
fval3 = fval3+250(5)
so that i can push some more values in fval3 and at i am
CONCATENATE fval4 fval3 INTO fval5.
so that fval5 may get all values this is the way i try but fval5 is not holding all the values
i asked solution for that
fval 3 = fval3+250(250)
dosen't have any meaning i know that friend
my question is how to hold the remaining value -
How to change the Display Pattern for Decimal Fields dynamically
hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
PrabhuHi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A. -
How to use the DISPLAY RECORD Setup Command in an etext file?
Hi All,
How to use the DISPLAY RECORD Setup Command in an etext file?
I want to display a <NEW RECORD> conditionally. The condition will be based on the data coming through from the xml file.
Please help me with an example. The BI User guide also doesnt show any examples.
Your help is appreciated.
Rgds,
Kiran PanditiHi,
You can use vb coding in BEx Analyser to calculate your unit price. For this you have to first display the attributes of your object "XYZ". Then you can use VB cosing to calculate the value for the unit price field.
One more thing cna you clarify whether is it display attribute or variable ?
Regards,
Balajee
Maybe you are looking for
-
Surface Pro 3 Type Cover Scrolling Behavior
I asked the same question in the surface comminity forum, and the support engineer suggested that I relay my question here. I've just purchased a surface pro 3 with type cover. It's a great machine and I use it for web developement projects on the go
-
Switching iTunes from mac to pc - having problems - help, please!!!!
I have an iPod and a Shuffle and all my music is in iTunes on my mac. I want to now have my iTunes on my pc instead. I understand my iPod is not compatible, so I plan to re-format it once I get iTunes all squared away. I downloaded iTunes onto my pc
-
[SOLVED] Error '/usr/lib64 exists' while installing adol-c
I just tried to install adol-c from the AUR. At the end of the install I ran into this error message: error: failed to commit transaction (conflicting files) adol-c: /usr/lib64 exists in filesystem Errors occurred, no packages were upgraded. The inst
-
Dear Experts, Can anybody please provide information about the exact use of Parameters tab, user groups tab in SU01.
-
Left Speaker in Iphone 4 not working since 4.1 update
anyone else having this issue the right side is working fine but if u cover the right side nothing comes out of the left side..