How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

How do I get a folder to open up in Final Cut Pro version 6. I'm on a MAC OS X Version 10.6.8. The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive. When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found. Unable to import this file." When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file". What should I do or what am I not doing?
Cliff

YYou should ask this question on the Final Cut Studio forum.

Similar Messages

How do you get more free effects to use in Final Cut pro x?

I am looking for a safe free place to download more effects that I can use on my videos in Final cut pro x that include effects that aren't just limited to the colors of the video. I also hope that the place will have clear instructions on how to download them onto final cut pro x. If you know of a place like this let me know, thank you!

fcp.co is my go to place for transitions and effects. Most are between $20 and $50 and because they have many effect in each are well worth the money spent. My favorites are Pixel Studios and Lucas, both purchased through FX Factory. Look at the examples and demo videos before you buy.
Good luck!

Can an "Archive From Camera" folder be opened up in Final Cut Pro?

Greetings.
I'm just starting out, using an AVCHD camcorder and iMovie.
I've got video in my camcorder, and I want to remove it from the camcorder to make room for more video, and edit it in iMovie.
However, I also want to preserve the original in its original form for posterity and future use. I'd like to keep an original forward-compatible version around to use in Final Cut Pro (which I don't yet have but plan to get).
iMovie gives me two import options - directly into iMovie (which changes the file), and an "Archive From Camera" which appears to save it in what looks like the same folders/files as what's on the camcorder.
If I perform an Archive From Camera, can I use the folder it generates to import the original video into FCP at a future date?
Is this the best way to take video, use it in iMovie, and save a copy of the original so that it's there if I want to step up the editing at a later date?
Thanks!

Thanks!
So the safe workflow is basically: 1) make archive, 2) backup archive, 3) import into iMovie, 4) reformat camera.
I'm nervous about errasing the video in the camera before I abolutely know it's safe, but I imagine if I leave it there and add to it, the next archive will combine new + old material..
(apologies for the mirrored post - at 1st there were no takers in FCX so I then posted here).

How do i get my home made movies (made with final cut ) into iTunes

How do i get my home made movies (made with final cut ) into iTunes
Thanks
Lee

Use MPEG Streamclip to convert them to MPEG-4, and drag those files into the open iTunes application window.
(65006)

Final Cut Pro version 10.1.1 won't open.

Hi All. My Final Cut Pro version 10.1.1 won't open at all. I am on mavericks. Having read quite a few threads, I have trashed preferences and also reinstalled the software but no joy. The screen flashes up with "Final Cut Pro can't be opened - error -1712" Any help would be appreciated. Thanks!

cjstuartsmith wrote:
I can never get past the stage of the Final Cut App logo bouncing on my desktop. The only options I have available is to force quit as the "application is not responding"
It's possible the alias in the Dock is corrupted.
Drag that icon off the Dock and let it go on a blank area of the Deasktop. Poof, it should be gone.
Go to the Applications folder and drag the FCP X icon into the Dock or start FCP X from the Application folder.
Trashing the Preferences as suggested may help.
Also use Disc Utitlity and repair permissions.
Al

How to publish Motion 5 templates with another editor's Final Cut Pro x

How to publish Motion 5 templates with another editor's Final Cut Pro x

That's also simpel,
Let the Motion 5 designer deliver the map that he made. For example he made a title effect with the title "We Are Awesome Company Title" than you get that map after the head "Effects" map. So he must send that map with all the stuff in it to an editor and the editor place that map in Motion Templates -> Effects.
Restart Final Cut Pro X and there you go.

After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly. This happened after update. Final Cut Pro X 10.1.1

After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly.
This happened after update.
Final Cut Pro X 10.1.1 & Mac Pro 10.9.2

Just refuse to open.
Player show me first page (background) & refuse to open.
Thanks. Greg.

I can't get my blade tool to work in Final Cut Pro X 10.0.7

I can't get my blade tool to work in Final Cut Pro X 10.0.7. I magnify the clip to the highest zoom and when I select the blade tool, I see the icon but when I click on the clip to chop it.....nothing. The blade turns red and nothing happens. Please help.

If you are in fact in the active project window, try command B at the location of the skimmer and see whether it makes the edit.
Russ

How can I get a version of Final Cut Pro X that works on OS Mountain Lion?

I just downgraded my laptop to its original OS (Lion) and will be upgrading soon to Mountain Lion because this laptop is too old to work with Mavericks or Yosemeti. So far Final Cut Pro X, Motion and Compressor (which I had originally purchased when I first bought the computer) do not work. Will Final Cut Pro X work on Mountain Lion? If not, what can I do to get a version that will work?
Thanks!

10.0.9 is the latest version compatible with Mountain Lion. I found this article which may help you:
http://thefcpxeditor.tumblr.com/post/70885235923/what-i-can-run-fcp-x-10-1-and-1 0-0-9-on-the-same
At the time it was written it was apparently possible to download from the app store with a computer running ML. Maybe this is still the case.
FCP 10.1. has video requirements which are not met by older machines. I'm not sue about 10.0.9 but that might possibly be a 'gotcha'
I'm a bit confused though since if you downgraded you laptop to Lion but Mountain Lion is the latest OS it will run then you must have been running ML already
Geoff.

Why does my 4:3 miniDV video keep getting captured as 16:9? (Vidi/Final Cut Pro question)

This is partially related to Final Cut Studio, although not necessarily. I've been trying to back up dozens of my miniDV tapes on to my harddrive for several months now, racing against the clock as their video quality starts to degrade. Since Final Cut Pro started giving me problems with the timecode breaks, I started using a capture program called Vidi instead (v0.4.7) Everything was capturing well, considering, until just last week where several of my tapes, which were shot in 4:3, would capture as 16:9. That is, the video files were clearly stretched to a 16:9 aspect ratio and appeared distorted. Today I tried to go back to Final Cut (v6.0.6) to capture it the old way, and, lo and behold, the video was once again being stretched to 16:9.
A few things:
- I'm about as sure as I can be that these tapes were shot in 4:3. I've watched them several times on my TV and they are played back in 4:3, with the black bars on the left and right.
- I had actually captured video previously from one of these tapes a few years back and it recorded as a 4:3 video file, just as it should.
- I definitely have "4:3" checked off in Vidi when I capture the video. What's even more infuriating, is that BOTH Vidi and Final Cut show the video playing in its 4:3 aspect ration during apture. It's only when I check the captured file that it's been stretched to 16:9
- A tape I shot in 2008 captured perfectly with Vidi today - in it's 4:3 format. That seems to imply that it's not a software setting issue.
I'm starting to lose my mind with this, especially since I haven't found a single reference to this problem anywhere else. All I want is to get the raw DV data off of these tapes to work with at a future date, and I'd like it to be exactly as it was originally shot, not distorted. Maybe some bit of code on these tapes got messed up over time, resulting in capture software to think it was shot in 16:9? These tapes aren't anywhere near my oldest ones - they're from 2010 and 2011. Is there something obvious I'm missing when I capture these videos? If there's no other solution, is it possible to squeeze them back to 4:3? It might not look as good as if were captured in it's native format, but I'm out of ideas.

Not sure if it makes any difference for archiving purposes, but dv files (dv streams) are not generally recommended for use in fcp. .mov with the dv codec is how fcp captures SD video via firewire. Someone a few months ago claimed that .dv was fine with fcp, but I seem to remember that audio will always need to be rendered and since I always use fcp for capture of DV material, it's not an issue for me.
You can use compressor to both convert to .mov with the dv codec and reset the anamorphic flag. Not sure if there will be any loss of quality, so it might be worth testing this. Perhaps someone with more knowledge will speak up regarding this or alternative methods of converting .dv to .mov
What problems are you having capturing from within fcp? Shouldn't be a problem. I find that setting the easy setup correctly is crucial for successful capturing. Even if all the individual elements that seem to compose the easy set up are correct, there can still be problems. Perhaps you might want to start a new thread regarding your capture problems and we can see if we can solve the problem.

HELP! How can I view a clip frame by frame in final cut pro?

Hi, does anyone out there know how to view a clip in final cut pro frame by frame. I don't really want to use the jogging function as you cannot see each individual frame just all the frames snapped together. Any help would be much appreciated. Thanks.

http://discussions.apple.com/thread.jspa?threadID=1304742&tstart=0
It is really time to open the manuals, do the tutorials, and learn the basics of how this application works. You'll be amazed at what you learn it can do!
Shane

How to convert my personal DVDs to be edited in Final Cut Pro 7?

Hi guys,
I am working on a project that need to edit my personal DVDs in Final Cut Pro 7, but what i need to do first is rip the DVD to a Final Cut Pro 7 compatible format, to which format should i convert the DVD? I am using iSkysoft iMedia Converter for Mac, it has many output formats. It is a little difficult to decide the right one.
Would you please help? If possible, please tell me the codec/ resolution/ bitrate . thanks in advance!
Albert

I understand what format DVDs are. My suggestion is - if you generated these DVDs, you must have the source footage. Why not use that?
I'd suggest you open the manual and start with the getting started section and work through any tutorials that came with your version. This program is complex and you need a fundamental understanding of more stuff than we can cover in this forum.
Ken Stone's website has a number of tutorials and is a good source of new user information as is Lyndia.com
x

How can I playback blu-ray .img files generated by Final Cut Pro X?

When I share a Final Cut Pro X project in Blu-ray and I set the output device as Hard drive (blu-ray), it creates a blu-ray image with a .img extension.
By the way, the project's clips are AVCHD (.mts extension) and the settings are set to 1080i (1440x1080 25i).
My question is: can I playback this file without having to burn a blu-ray disc?
I've been looking for information, and some people seems to playback blu-ray .iso files.
And: would Compressor 4 solve my problem? (is there anyway in Compressor to create a .iso image or something easier to play?).
By the way, I do have access to both Windows and Mac computers.
Thanks in advance,
Pol

Thanks for the answer.
If you own Compressor 4, could you tell me if it includes an option to generate a .iso file instead of a .img?
(here's information on how to playback a .iso).
Thanks,
Pol

How to import footage to an external hard drive in Final cut pro X

I am having trouble importing footage from camera directly to an external hard drive in final cut pro X. When I go to import the footage, and select where I want it to be saved, my external drive is not even listed. It shows up fine on desktop and in final cut pro 7. I also unchecked the box in FCPX preferences of "copy files to final cut pro folder". Any advice is appreciated.

Nevermind, I hooked up my other external that is formatted Mac OS Extended that is used for time machine and FCPX recognized it fine. I guess I will have to reformat the MS-DOS harddrive to Mac OS extended as well.

How can I import my xdcam files (Sony PMW200) into final cut pro

Hi.
I just got a Sony PMW200 but cannot figure how to import files into Final Cut Pro 6. I copied the SXS cards to my hard drive and am trying to figure out how to import it into Final Cut.
I would really appreciate a little help.
Thank you very much in advance.
Brian

Hi:
If you own the material rights, you can use MPEG Streamclip to reencode to an editable format like DV.
Hope that helps !
Alberto

How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

Similar Messages

Maybe you are looking for