How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated

Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.

In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
''troyable7 [[#question-1058550|said]]''
<blockquote>
Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
</blockquote>
In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you

Similar Messages

  • The keybord of my Ipod 5th was fine until I update to ios 7, now i can not use the keyboard because it took like 15seconds to the letters to appear

    They keyboard of my Ipod 5th was exellent until I update to ios7, now i cannot use the keyboard because it took like 15 seconds to the letters to appear

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • TS1398 my iphone 4s lets me connect to my home wi-fi but then i get disconnected. my phone was fine until i updated the software to iOS 6.1.3 version

    i ahve a iphone 4S and was working fine until the last software upgrade. i connect to my home wi-fi and it works fine for awhile then it disconnects me. never had this problem until that last software upgrade

    Hi Precious.eyez,
    I understand that you are having Wi-Fi connectivity issues. We have a great resource for troubleshooting these type of issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Try moving closer to the Wi-Fi router or base station to see if the Wi-Fi signal improves.
    Check for sources of potential interference.
    Remove your iOS device from any case, stand, or other attachment to see if the Wi-Fi signal improves.
    Open Safari and try to load a webpage to see if the Wi-Fi signal improves.
    Alternatively, you may want to make sure your network does not have a common name:
    Avoid giving your wireless network a common name (SSID)
    http://support.apple.com/kb/HT4450
    Thanks,
    Matt M.

  • Delete the space between multiple clips, at once, on the timeline?

    Is there a way to delete the space between multiple clips on the timeline with one click?
    I trim clips on the timeline, so I can have a couple hundred clips with space between on the timeline.  Is there a way to delete all the spaces between the clips at once? 
    Right now I have to ripple delete the space between each clip, big hassle and a lot of key strokes. Is there a better faster way to trim clips in general?  Or delete the spaces on the timeline?

    I have not used the source monitor much. Can I use the sourse monitor to make a lot of cuts "clips" out of one big clip?  Say I want to take the highlights out of a long wedding ceremony?  Or do I need to do this one the timeline.  Edit clips on the timeline is very intuitive to me and I can do it fast, except for all the spaces betweent the clips.
    Absolutely ( and I wouldnt do it any other way because it is designed for ease and speed)
    Try it:
    1.Target a Video and Audio track in the timeline
    2. Place the long source file in the Source monitor.
    3. Locate the  first highlight and Set In and Out Points  ( KBD Shortcut "I' and "O")
    4.Then Insert it to the timeline ( KBD "," )  
    Note: there are a number of ways of sending the selection to the timeline (eg.Insert / Overlay buttons, drag it to the Program Monitor, drag direct to the timeline). You can also take video only, audio only, both. Darg options have modifier keys for insert / overlay ripple-ing
    Back to the source monitor (step 2)  and mark next highlight selection....repeat steps...etc.....
    Ensure your CTI (playhead) is always at the end of the last clip in the timeline.  KBD short cut "End" and you will have no gaps to deal with.

  • Justify tracking? That is, justify letters, not the space between words...

    I know this question might be kind of hard to understand... Okay, so usually you justify type, and you can get some rivers, right? I've been reading this book, and the type is set in a way where there are no rivers. The type is justified, but it seems as if the individual letters are justified (like the tracking) rather than the words. The space differs from each word's letters, and not the space between each word. Attached are some photos of the book in question.
    Exaggerated examples of what I am trying to say.
    The book's layout:
    H e l l o   m y   n a m e   i s   L a n d o n.
    Normal Justification:
    Hello      my     name     is         Landon.
    Thanks!

    Yes, InDesign allows this. Look in the Justification options: the default settings are to adjust Word Spacing from 80% to 133%, with a preferred value of 100% (which is in Space Widths), and Letter Spacing has all set to 0%, meaning it should not be touched. (I may have set these as defaults. YMMV.)
    To achieve this effect, you could -- at least theoretically -- set "Word Spacing" to 100%,100%,100% and set Letter Spacing to something like -5%,0%,20%. Be warned though that in this case, InDesign will Do What You Ask, but that this will not "thus" make Good Typography!
    With slightly more sane settings, Word Spacing at 90%,100%,110% and Letter Spacing at 0%,0%,20% (note I don't touch the "Minimum"!), you get something like this. Top: regular settings, bottom: adjusted.

  • How to create a table with the spaces between the row..

    Hello,
    I am using jdev 11.1.1.6 and I need to insert the spaces between the rows. How this can be done?
    Thanks and Regards,
    Tarun Agrawal

    Hi Tarun,
    This css rule is useful to set the padding on each cell:
    .AFTableCellPadding:alias {
      padding: 10px 0px 10px 0px;
    }But if you want to insert a real space between the rows (property "cellspacing") you can do something like this:
    af|table > div + div > table {
      border-collapse: separate;
      border-spacing: 0px 5px;
    }AP

  • How to adjust the space between images in a carousel or images with horizontal scroll

    I use the next steps to create a carousel or horizontal scroll of images:
    Webcenter portal: Spaces
    Spaces
    Manage Settings
    Pages
    Create page
    Content management
    Content presenter
    Add images with Plus Icon
    It works, but between every image has a lot of space, can you tell me how to reduce the space between every image.
    My Oracle Version 11gR1 (11.1.1.3.0)
    Regards
    Tomas Reyes

    Remove line 234 in your HTML code.
    <p>& n b s p</p>
    This is a redundant line of code. Your spacing should get resolved.
    PS: I've given spaces between the tag because otherwise this forum would not display the line correctly.

  • How can I adjust the space between the dividing line of the footnotes and the continuous text?

    How can I adjust the space between the dividing line of the footnotes and the continuous text?

    I want to extend the space so the dividing line does not stuck to the normal (continuous) text in my thesis. Do you have a solution? That would be perfect. Thanks a lot!

  • How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
    Open Find/Replace and click the Object tab.
    Click the Specify attributes to find button to the right of the Find Object Format: field.
    Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
    Click OK
    Click the Specify attributes to change button to the right of the Change Object Format: field.
    Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
    Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
    Click OK
    Click Change All

  • How can i set the space between two button?

    Hello,
    I have
    <mx:HBox>
    <mx:Button label="one" />
    <mx:Button label="two" />
    </mx:HBox>
    how can i set the distance between this two compotents?
    Thanks

    quote:
    Originally posted by:
    robinbouc77
    Hi,
    you can use horizontalGap property on HBox to change the
    space between your buttons. I think the default value is 6. You can
    also use <mx:Spacer/>, but changing the gap on HBox is
    probably the cleanest way ;)
    C U
    perfect!!! works fine

  • How to manage the space between a table and its title?

    Have tables where titles are very close to the main text and need a couple of points to separate these elements. How to reshape this space?
    1. Titles were separated by a return that is not  visible...  (any code is revealed by ID)
    2. When a Return is inserted after the title, nothing happens aparently, but this return is now visible and could be used as a «paragraph space after» value:
    3. A solution could be Grep to catch the end of paragraph assigned to titles to insert a return;
    but Grep only catches the right border of the table (the yellow mark shows the big blinking cursor);
    Grep cannot see the end of paragraph in the tables's title.
    It another method?
    Basically, how to modify the space between a table and ists title

    I think you and Bob are not in synch here.
    Bob suggested that you could use paragraph spacing, but for that to work you do need to use separate paragraphs for the title and table, which you don't seem to be doing. Using GREP to find the end of the paragraph only works if there IS and end to the paragraph. As far as I know there is now meta-character to use in Find/Change that would allow you to find a table and insert a paragraph break ahead of it, but I bet it could be scripted.
    I'm not quite sure what you were trying to find in the GREP you posted. Did you actually have a paragraph return inserted already after the title? In that case you only need to redefine the style for that paragraph to add the space (or redefine the style for the paragraph that holds the table itself). You don't need the GREP. But the reason it does nothing is that you've found a location -- the end of the paragraph, but haven't found any actual text to modify. To do anything you would need to use something like .$
    But back to NOT having a separate paragraph... If you put the cursor in any table cell and go to Table Options > Table Setup tab you'll see fields to set space before and after the table that should do what you want. That was the second part of what he posted.

  • How to eliminate the space between two analysis in the Dashboard?

    Hi All,
    I have created a Dashboard which contains 12 analyses arranged vertically. When i see the report in the dashboard section it contains some standard space between each analysis. So it looks like separate separate analysis arranged in dashboard. But i want it to look a single table is it possible by reducing the space between every analysis? If possible please let me know how to achieve this in clear manner.
    Awaiting your valuable responses.
    Thanks in Advance
    Thenmozhi

    Hi,
    Yes,try to adjust the analysis view (table/pivot/chart view )Formating option...
    FYI: try to align formating left,right,top/bottom padding and also try to reduce the width and height..
    Please refer the below
    Re: Eliminating the space between two reports in OBIEE dashboard page Section
    THanks
    Deva

  • How to reduce the space between to words in Scripts?

    Hello Friends,
      How can I reduce the space between to words in Scripts?
    Thanks & Regards
       Sathish Kumar

    use &ekpo-ebeln(C)& it is for reducing the space...
    if you are trying to codense the space in prog  and then want to pass that to script use
    condense ekpo-ebeln <no-gaps>.
    <no-gaps> is optional ...so as per your requirement you can use it
    regards
    shiba dutta

  • How do you remove the space between the lines in your email signature?

    I have a problem with my signature in business catalyst mail.
    I have added a logo and my signature and when I send the email it looks good.
    There is the space between the lines that I want.
    But when the mail is received it looks like this:
    with too much space between each line. How do I fix this?
    Thank you in advance for you help and your time.
    Regards Winnie

    Hello,
    Well the good news is it looks like it's going to be some css and html issues the bad news (for most people) is it looks like it's going to be some css and html issues.
    Couple things.
    Are you looking at vertical or horizontal spacing?
    Region 1 in the shipped themes are used for breadcrumbs and usually have set vertical spacing and margins.
    Have you looked at the other layout examples in that application, there's 2 that show different ways of getting exact layout.
    Look at your page template there is an attribute called
    Region Table attributes
    if it looks like
    summary="" cellpadding="0" border="0" cellspacing="0" width="100%"
    change it to
    summary="" cellpadding="0" border="0" cellspacing="0"
    and see if that helps?
    If you can put an example on htmldb.oracle.com thats the easiest way to help you out, as a rule it's very hard to debug UI issues without seeing them.
    Carl

  • How do I alter the space between the Bullet and the start of a sentence?

    Hello, I have recently upgraded to Pages 5.0.1, I would like to adjust the space between the bullet and the start of the sentence without having to use space as I need to save this action as part of the template that I am working on. I know the tabs at the top adjust indent but they move the bullet too, I need to change the space between the two. Thanks in advance for the help!

    Please ignore this question, I found it, just wasn't used to the new layout of the inspector. For anyone else who is looking, the inspector is the pannel on the left, at the top click style, then at the bottom you will see bullets, click the arrow next to bullets to expand the options then adjust the "text" indent, note there are two indent options "Bullet" and "Text", "text" effects the space between the bullet and word and "bullet" effects the space between the margin and bullet.
    Now I just need to work out how to update the default font styles in new pages and I'm back to where I was six months ago.

Maybe you are looking for