How to I make all the pages in a Pages document into pages, not sections, to I can drag specific pages around and place them where I need them? When I try to drag a specific page, it drags an entire section.
How to I convert all the pages in a Pages document into simply pages, eliminating pages called "sections", so I can pick and chose specific pages to drag where I want (without dragging an entire section of pages)?
Insert a Section Break at the foot of each page
or:
Toolbar > Document > Document > uncheck Document Body
This will destroy any content in your document, but I presume that is what you want.
Peter
Similar Messages
-
How do I make all the music in my iPod the same volume because sound check doesn't work and i have all the latest firmware.
Nothing more you can do.
-
How do I put all the songs from a compilation album into the same /album/folder in Itunes v12 i know in other versions it was via get info but as all of the tunes have the same album title , I am not sure what tio change to achieve this ?
I don't see your screenshot but I assume you're starting with something like this, i.e., the compilation split into multiple albums:
If you select all the items that you want to be in a single album, right-click > Get Info you'll see this:
As you say, in iTunes 12 you don't see a field to enter a distinct Album Artist value. You can, however, address this by clicking the Add Field button and selecting Album Artist:
That makes the field available in the metadata dialog so that you can enter the required value:
You can also show the pre-iTunes 12 version of the dialog by holding the SHIFT key when selecting Get Info - this allows you to enter the Album Artist directly: -
On iPhoto I can see all the pictures for one event, but about 9 out of 106 I can't move to print or place it anywhere else?
Basics from the manual are restrt, reset, restore.
Have you tried each of these? -
How do I put all the episodes from a TV show into one iTunes folder?
Can someone tell me how to put all the episodes from a TV show into one folder? I'm not sure how I did this, but while converting my dvd's to digital on my computer, one TV show (Firefly) created one folder with the Firefly name, and within that folder are all the episodes. I've tried to recreate this with MASH, but it just puts each episode into the TV library. This gets very messy with alot of different TV shows. Help! Thanks!!
In principle TV Shows are grouped on the Show field and within a show sub-grouped on Season No. In practice recent builds of iTunes and/or Apple TV firmware seem to be taking account of Album, Artist & Album Artist in certain views. For consistency I would suggest the following approach:
Show = Album = <Show Name>
e.g. "30 Rock"
Artist = Album Artist = <Show Name> Cast (or something like that)
e.g. "30 Rock Cast"
Season No. = <Season No.> or <Blank> (Separate seasons or all listed together)
e.g. 1-3
Episode ID = s##e## (This field, sorted alphabetically, controls order)
e.g. s01e01 - s03e58 (use s##e### when >99 episodes)
Episode No. = Track No. = <Absolute Episode No.>
(Can also be per season, but abs. is better) e.g. 1 - 58
Disc No. = <Season No.> (Can be set even if merging seasons)
e.g. 1-3
Taking this approach you can always merge or split into individual seasons simply by clearing or setting the Season No. field.
For general tips on organizing media in iTunes see Grouping tracks into albums.
tt2 -
How do I make all the pages in the document to be the same dimension?
I have created a new PDF by merging several files together. How do I make pages to be all the same dimension?
Acrobat takes your files and merges them together, and uses the original dimensions of each document for the finished PDF file. I recommend changing the page size of the original document before converting to PDF.
-
How do I make all the clips on one track the same volume?
I am trying to raise the volume equally on all the clips. One would think that it would be as simple as turning up the volume knob on the audio mixer on the track with all the clips, but of course not, that would be TOO simple. When I raise the volume, it keeps jumping back and forth as if I asked it to key frame the volume knob. How can I perform the simple task of raising all the clip volumes to the same volume ?
VideoHero
I do not recall what version of Premiere Elements that you are using nor the computer operating system on which it is running.
So, I will generalize for now, referencing version 12...
1. Assuming you have several Timeline audio clips that you want with the same volume...select the first, go to Adjust Tab/Adjustments Palette/Volume Panel expanded and adjust the Volume.
2. Then right click the that first file (with the adjusted Volume), select Copy.
3. Select all the other audio clips that you want to have the same Volume level. Then right click anywhere in the selection and select Paste Effects and Adjustments.
Does that work for you.
If you have video with its audio linked to it, depending on the specific circumstances to be discussed later, you might want to unlink the audio and video beforehand.
Please review and let us know if that works for you. Any questions or need clarification, please do not hesitate to ask.
Thanks.
ATR -
How do l delete all the text in my InDesign document in one go?
Hi
I managed to get the solution to my formatting problems for my book in InDesign CS6. I'm scared that with all the messing about something may have gone wrong. Is there a quick way to just delete the text - ie leave headers, footers and page numbering in place as well as the settings for automatically adding page numbers. I tried to sort this last night but the only solution I found seemed to want to take the whole page out and I don't want to go through all the setting up of headers, footers, page numbering and of course all the associated place holders. Anyone got a solution?
JohnHi Peter
I'm not sure I completely understand. The file is simply a 200 page+ Word document that was autoplaced in InDesign. You've been really helpful to me with this In Design document - thankyou. What I'm getting at is that because I increased the gutter size to comply with printing specifications after I placed the Word document for the first time - some text that was on page 100 and was the start of a chapter - and therefore had no header, now appears on page 110 in the new file which in the original placing of the text had got a header and footer on. All I want to do is delete the story text - ie the Word document that was autoplaced.
Cheers Peter -
How do I make all the text entered in a fillable form print?
I have created fillable forms for patients to fill out on our website then print and bring with them. When they print the form, all of the information they entered does not print. How can I make it all print??
Hi Dana,
Could you please let me know how were these PDF forms created.
You might also need to check in 'File> Properties> Security' tab whether 'filling of form fields' options is allowed or not.
Hope to hear from you.
Regards,
Anubha -
My computer crashed back in Feb or March of this year and I just recently reinstalled itunes on it. Once reinstalled itunes updated software. Once this was all done I noticed that alot of songs on my IPod were no longer in itunes. Also, the folders in itunes no longer matched what are on my IPod. itunes says the computer is active for itunes and many songs on my IPod are on itunes but many are missing. How do I get itunes to just sync and match what is on my IPod to include all songs and folders. Many of the missing songs on my IPod and not in itunes are ones I purchased from itunes so they should have them. I am getting very discouraged with itunes. I tried to do a support call and pay the fee to have them call to address but I am stationed oversees and they would not accept my overseas number as valid.
Any help is greatly appreciated. As stated, I just want the music now on itunes to match with my IPod to include folders. Seems music got lost. Any suggestions how to back up the music so if this happens again I do not have this issue. I figured itunes would have my music or at a min just sync up what is on my IPod.
Thanks gunnerProbably a bit late to help in this thread, but the question is asked & answered frequently.
*Recover media from iPod*
See this post from Zevoneer for options on moving your iPod data back to your computer.
http://discussions.apple.com/message.jspa?messageID=7217190#7217190
Some of the tools linked to will only work if the iPod has a valid library. Others can scan the drive independently and some may even be able to rebuild a damaged library. The manual method towards the end should be able to recover your media regardless of the state of the library.
tt2 -
Thanks!
Sign into your previous Apple ID. Then use the App Store app and select previous purchases. That will list the purchases and downloads made with that ID.
-
I have just purchased a wish list from ITunes store (over £50) and it has downloaded lots of songs from an album called ''spamalot' does this mean ITunes has a security problem..... how do I get to speak to a REAL person on line..... do these people not have a customer service rep you can contact? Has anyone else had this problem..... I dont know what I have received now, and what I have not received................. pissedoff.com
http://www.apple.com/support/itunes/contact/
-
How do I export all the photos I imported back to their original folder
How do I export all the photos I imported back to their original folder just as they were, they haven't been modified, adjusted etc. I imported them by mistake.
You don't need to worry. You won't lose photos when the 30 day trial expires.
Lr is different than other photo editing software in that it works with a data base (called the "catalog"). Lr does not write anything into the image pixels but stores everything that you do in Lr into its catalog (=data base). That way, when the trial expires your images will still be there, but - since you cannot access the Lr catalog anymore - your photos will be in the state they were before you imported them into Lr.
When you work with Lr you have to really understand the concept of the "catalog", if you don't you will come into very frustrating situations. The concept of "catalog" involves above all that you need to think of your images based on two different files that are in different locations on your computer. One is your image file (Raw, JPG, TIFF) and the other is the data entry written for this image into the Lr catalog. Lr constantly updates this catalog (without you having to hit <save>) and constantly combines the image file with the data from the catalog. From this follows the demand that you take care of the Lr catalog as much as you take care for your image files - by knowing where they are located on your computer and by doing regular backups.
Would it be worth the investment? In my opinion definitively "yes"! I work with Lr since version 1 on a daily basis and would not want to miss it. Lr gives you superior image editing possibilities (in the Develop Module) but - as already said - is also a superb image management tool. Lr will keep track of all of your images irrespective if they are on internal or external hard drives. With Lr you have all of your images available all the time.
But Lr has also a steep learning curve. You cannot just jump in and do things because you'd create havoc and become frustrated. There are excellent books but for starters I would recommend that you watch the video tutorials on Adobe's website. You learn from them easily because you see on your screen what the instructor does, where he clicks, where the different tools are, etc.
Here are some links:
http://tv.adobe.com/product/lightroom/
http://tv.adobe.com/show/adobe-evangelists-julieanne-kost/
http://tv.adobe.com/show/learn-lightroom-3/
If you decide to buy, you can do so on Adobe's website. You will then be e-mailed a serial # that will unlock your trial version for indefinite time. -
How do I make appear the "phone with skype"-link, ...
How do I make appear the "phone with skype"-link, next to tel numbers on websites, that I visit ?
Hi, filipfirmout, and welcome to the Community,
In the Windows version, the settings to enable this are here:
Tools -> Options -> Advanced -> check in Use Skype to call to links on the web -> Save.
There is also this: http://www.skype.com/en/download-skype/click-to-call/
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
when i make my fire fox off if not ask me to save my exist tab , then i have to make all the off , its create problem. I am not able to pause my work.
Yes.
Did you before "purchase" a free app and then make in-app purchases.? Many free apps have in-app purchases the cost money. Did you pursue with iTunes the "unauthorized" purchases that you sad you did not make?
Contact iTunes
Maybe you are looking for
-
Acrobat XI can't open a PDF file if space in name
I have a .net WinForms Application that calls the Acrobat Reader using a System.Diagnostics.Process.Start. On Acrobat Reader 7 - 10, this works fine. On XI , I receive a message "Unable to Open a Document". Upon furthur research, it appears that I ca
-
Sharepoint Designer Workflow - Edit this task button not showing in outlook for some users.
Hello all, I have created a "collect data from user" workflow in Sharepoint Designer, with around 9 "else" instances as to who to collect data from. My problem is that some users do not have the "Edit this task" button at the top of the email (Nor do
-
General Approval Process in SSHR
HI all We are trying to get One way Approval process .That's when an applies or changes in personal forms ,Then it has to go it immediate manager.How to do this ? I need to know how to get this proceess to be done? If we need to use AME,what are basi
-
Hi, since system upgrade (about 2 weeks ago) i have problem with estabilish internet connection at system start. To connect i have to: ifconfig ra0 10.14.1.4 broadcast 10.14.1.255 netmask 255.255.255.0 iwconfig ra0 essid WiNet-AP14 mode 2 channel 7 b
-
also I like the look of the lightbox but don't want the thumbnails. why, in this mode, is the thumbnail box uncheckable to make it go off?