How to identify default version for a process in 11g EM Console

Hi,
In 10g, we had a "star" next to the default version in the bpel console to identify the default process.
How does it work in 11g...how to identify the default process quickly.
Thanks,
Amit

ok..i got something...want to know if this is the best method..
if one clicks on soa-infra, on the right pane, it shows all deployed composites (across partitions).
Here it is showing a small green circle just before the default version.
Is this the only way...actually i was expecting the same behavior when we select a particular partition.

Similar Messages

  • How to change default approval for ResourceAuthorizerApproval ?

    Hi,
    I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
    Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
    I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

    Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
    If there are other solutions please share with me
    Thanks
    M.

  • How to identify who ran the last process chain?

    Hi all,
    How to identify, who ran the last process chain for a PROCESS CHAIN NAME xyz in the production system?
    Thanks

    Hello,
    Go To RSPC1 give your process chain name (Go to  LOG View ) there  you will get Date selectin screen (give This Month and last Month or as per your reqirement) there you can see who ran the process chain with ID.
    Regards,
    Edited by: Subbu_Amar on Oct 13, 2010 5:01 AM

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

  • How to create new version for material

    Hi expert,
    Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
    Thanks

    HI,
    Do you mean to have version management for purchasing documents?.
    Best Regards,
    Arminda Jack

  • How to make a program for backgroung processing used servlet

    how to make a program for backgroung processing used servlet

    well i need the coding part written in servlet ,in which servlet is always ready for accepting a client request.

  • How to set Actual indicator for Business Process

    Hi,
    Can anybody tell me as "how to set Actual indicator for Business Process " in Activity Based Costing.
    Regds,
    Bijay

    ok

  • How many memory is used for the process of one connection?

    Hi,
    how many memory is used for the process of one connection in unix
    when the user connects to the database?
    Thanks,

    Write some queries using v$sesstat, v$statname, v$session to find the statistics for different stats. Query name from v$statname and find whatever you wants. I don't think there is a common rule that tells how much memory will be used for each connection, it depends on different factors like , resources available, type of databases, database memory settings etc.
    Example query.
    select s.osuser osuser,s.serial# serial,se.sid,n.name,
    max(se.value) maxmem
    from v$sesstat se,
    v$statname n
    ,v$session s
    where n.statistic# = se.statistic#
    and n.name in ('session pga memory','session pga memory max',
    'session uga memory','session uga memory max')
    and s.sid=se.sid
    group by n.name,se.sid,s.osuser,s.serial#
    order by 2
    ;

  • Setting default version for iWork files

    I installed the trial version of iWork '09 and decided not to purchase it. I deleted these applications, but when I reset the default version of Numbers to Numbers '08 (v.1.0.3) rather than Numbers '09 (v.2.0) using the "Open with:" then "Change all..." feature in Get Info, it opens correctly only once, and I have to reset it every time. I have the same problem with Pages and Keynote. Any ideas how to solve this problem?

    Thanks for the response, but this has nothing to do with how files were saved. It has to do with setting the default application used to open any word processing or spreadsheet or presentation file.
    In the meantime, I've solved my own problem. I discovered a little application called AppDelete, and after I used this application to delete all of the iWork '09 applications, the defaults were re-set to iWork '08 applications.

  • ISE default settings for "ISE - Process Status"

    Please put default settings for alerts "ISE - Process Status" for CiscoISE (PAN / Operations / Alarms / Rules / Criteria / Monitor Processes).
    For example, for version 1.1.4.218 for virtual machines.
    Thanks in advance!

    Hi
    You can view process status for the network from the Cisco ISE dashboard using the System Summary dashlet. For example, when processes like the application server or database fail, an alarm is generated and you can view the results using the System Summary dashlet.
    One of the requirements for creating an alarm rule is that you assign it to a schedule. The following task shows you how to create an alarm rule, and then assign it to a schedule.
    The following default alarm rules are shown in the user interface:
    • ISE - AAA Health
    • ISE - Process Status
    • ISE - System Errors
    • ISE - System Health
    You can create these alarm rules using the following procedure:
    • Passed Authentication
    • Failed Authentication
    • Authentication Inactivity
    • Authenticated But No Accounting Start
    • Unknown NAD
    • External DB Unavailable
    • RBACL Drops
    For more information about configuration etc please go through this link:
    http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_ug.pdf
    at page no.928

  • Identifying Default Version in weblogic server

    Hi All,
    Can anybody can tell me how to identify the default version of BPEL or Mediator interface deployed into weblogic server in SOA11G if they are deployed twice or thrice into weblogic server.
    In 10g we use to identify with a '*' symbol beside the interface name, but how to find out the same thing in Weblogic server.
    Regards,
    CH

    In 11g there is no symbol to see whether it is default version or not. Below are the ways you can check whether it default one ot not.
    1)When you click the process in em console example Project 1.0, If you not able to see the set as default tab then it is running with default version.
    2) Alternatively you can check the webservice URL in that see the SOAP end point. if it ending with something like Soa*unique. If you find this then it is a default version.
    Correct me if i went wrong.
    Thanks,
    Tarak

  • How to set default directory for SQL LOADER

    hi all,
    i wanted to know how can we setup a default directory for SQL LOADER if at all we can. i connot place my control and data files in local system and use them at command prompt. rather i wanted to know if we can set default directory that the loader can use. this requirement is basically to enable all the clients to upload the data placed on the server and use the loader utility.
    thanks in advance,
    Basavraj

    Ella,
    You don't say which version of SQL Developer you are using via Citrix, but just setting the SQLDEVELOPER_USER_DIR hasn't worked for a long time (see Re: SQLDEVELOPER_USER_DIR does not function anymore). Also, since version 1.5, the default for the user directory (now set via ide.user.dir as shown below) is under the user profile area (relative to %APPDATA%), which you should be able to write to, even on Citrix.
    Assuming that neither of those help, you will need to get whoever installed SQL Developer on the Citrix C: drive to modify the sqldeveloper.conf to have a line like, where the path exists for everyone who will be using the shared SQL Developer (assumes everyone has a H: drive):
    AddVMOption -Dide.user.dir=H:\sqldeveloperAn alternative (depending on how you start SQL Developer via Citrix), is to create your own shortcut to start SQL Developer with something like:
    sqldeveloper -J-Dide.user.dir="%SQLDEVELOPER_USER_DIR%"theFurryOne

  • How to Maintain Default materials for clearing house fee (IS Oil) O3RECH1

    Hi,
    I am an ABAPer. I have come accross one issue in Transaction O3RECH1 (Create CH Settlement/ Transmission).
    I am getting error. as No Material Exist. .. In debugging i came to know that material is empty since there is no data in field FEEMATNR  of table OIRECH_APPL.
    Table OIRECH_APPL --> SSR PC:  Clearing House application data  (IS-Oil SSR).
    In that there is one filed FEEMATNR --> SSR PC: Default materials for clearing house fee.
    Can any one please let me know How to maintain it.
    Answer will be rewarded.

    Interesting requirement. This can be achieved through Search String as suggested by Mr. Shanid.
    Try to find a text in the note to payee line for bank charges for creating a search string.
    For Example. See below note to payee line and assume this line for bank charges.
    16,455,130155,0,5/3 BANKCARD SYS  CH,,5/3 BANKCARD SYS  CHARGBACKS.
    Identify a text which should always come with this line for every EBS file for bank charges. Assume here "BANKCARD".
    Now go to T-code OTPM.
    Click on create
    Srch strg name:  Bank Charges
    Description:     Bank Charges
    Search String: BANKCARD ( Based on this text system will search your not to payee line)
    Once you press enter, you will get mapping details on the left side with target field "BANKCARD". Now remove the BANKCARD from target field and put there cost center which you will post for one house bank. Save the data.
    Now move to second step.
    Click on Search String Use.
    Put your company code,
    House bank(mandatroy in your case).
    Interpretation Algorithm( same as you maintained in OT83 for posting rule with external transaction type).
    Search String: BANKCARD.
    Target Field: Cost Center.
    Save.
    Sorry I am not getting option to attach screenshot in SCN now. Dont know why.
    Let us know if you have any doubts.
    Hi Mr. Shanid,
    Correct me if I am wrong.
    Regards,
    Mohammed

  • How to identify default browser through a 'C' program on solaris 8

    I have a requirement to display a html page in the default browser installed on solaris 8 machine through a C program.
    through a C program,
    1. How to identify the default browser installed on a solaris machine?
    2 How to get the path of the default browser installed on solaris machine?
    thanks in advance.

    Thaks a lot for the help,
    When Internet Explorer is installed on solaris as a default browser, it does not change
    the user-prefs.dt file. But still when a HTML document is double clicked from the file manager of solaris CDE, it opens the HTML page in Internet Explorer.
         Internet Explorer copies a file called IE.dt in /etc/dt/appconfig/types/C. Just by copying a file how does the CDE file manager is able to open any html file in Internet Explorer??
         Further the installation path of the Internet Explorer is not fixed as that of netscape. Our application need to display the HTML help in user's default browser.
    On Windows-NT this can be implemented just by passing the html file as an argument to a win32 API ShellExecute(FindExecutable can also be used.
    How this can be achieved on solaris??
    Regards,
    Atul.

  • How to make default value for controlling area for MDG-F 7.0

    how do we default certain pre-defined values for few fields? e.g. controlling area or company code for MDG finance?
    Thank you in advance.
    SP

    Hello Sahil
    Account and CC/PC are 2 different entity types. For PC and CC there is dependency. First you have to load Cost centers and then load PC.
    For CC - load CC master data first. Then load hierarchy file then group file and finally assignment file.
    Follow same process for PC.
    GL you can load independently but you have first load group GL then operational GL and then GL at company code level,
    Kiran

Maybe you are looking for

  • Unable to shutdown/restart

    Using a Flat Panel iMac with 10.4.11 installed (can't install Leopard) and now am unable to Shut down or restart. Desktop clears, dock goes away but the background image stays, and the unit never shuts down. The pointer is movable during all this. On

  • Issue for Form 16 and tax Computation on Salary to Employees

    Dear All Can Anybody suggest a way out for the following - We have to issue form 16 as per Indian income tax laws to employees. is there any method for computation of tax on salary or any development is required for the same. As per the Indian income

  • Unable to open mutiple windows in planet romeo how can it be fixed?

    i am unable to open multible windows with planet romeo website whenever i open a profile n click on other profile the profile opens in previous window it was not happening earlier please resolve issue

  • Loader size bigger then scene1

    Hi flash lovers, a simple doubt here: since my main swf file has accettable size is it wirth a loader? here is what I see with a loader on Frame #    Frame Bytes    Total Bytes    Scene       1          54751          54751    Loader (AS 3.0 Classes

  • Xlock started with udev closes after 3 seconds

    Hi, I want to start xlock when I pull my USB key out. It works far enough to see xlock for 3 seconds or even a minute but then it allways dies without comment #cat /etc/udev/rules.d/50-unlock.rules SUBSYSTEM=="usb", ACTION=="remove", ENV{ID_VENDOR_ID