How to identify the right extractor

hi all,
i have a custom extractor(ABAP report) to pull the Std cost info into BW from R/3. I would like to remove this custom extractor and go for a generic one. Can anyone provide me the steps on how to identify the appropriate generic extractor.
i know the underlying tables names....eg KEKO, KEPH etc

Hi Vinod,
There will no appropriate generic extractor as such. Generic Extration itself means creating a custom extractor. All you need to do is
1.Goto RSO2, select the type of datasource(i.e transaction or Masterdata)
  and click on create
2. Specify the table name, ( if you are pulling data from two tables then you have to create a view at Tcode se11, then you need specify that view here)
3. click on generate
This will generate the datasource
You can refer the following doc for further assistance,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Thanks
Vj

Similar Messages

  • How to identify the Stanadard Extractor  will support for Real time Data

    How to identify the Stanadard Extractor  will support for Real time Data  Acquisation . Enabled

    Hi
    In the ROOSOURCE table you can find the extract structures, go through all the fields of the extractor and if you find all of your equired fields exist ok else try to enhance for teh needed fields and go with user exit to populate the data for that fields'

  • How to identify the right Install Disc Version for a specific mac model???

    Hello
    i hope someone here can help me here...
    I have 12 mac mini's and about 20 Packs of the original OSX 10.4.x CD'/DVD's (the grey ones).
    How can i find out witch CD (and AHT) is the right one for witch mac mini model? They all have the line 'mac mini' but the are different Versions of OS and AHT and every time when i try this i get the wrong one for a specific model.
    I have been looking for more detailed informations but can't find anything!?
    Any Idea?
    Why Apple does not provide a table with all Model Numbers and e.g. the fitting AHT Versions?
    Heeeelp pleeeeease - i am going crazy here...
    Thank's !

    Hello iKing
    Apple keeps that info close to its chest, because the whole idea of the grey disks is to limit their currency as potential upgrade disks in the secondhand market.
    So rather than post here in this user's forum, instead contact Apple and explain your problem and provide the serial numbers of your Mac minis and Apple should be able to tell you the corresponding version numbers of the relevant disks.
    And after, I'd suggest use a texta/soft marker pen on the CD/DVD's to pair them with their hardware.
    A spelling error was edited.

  • How to Identify the Same Characters in 2 Different Strings

    Hi All,
    I am requiring a suggestion on how to identify the same characters in 2 different Strings, for example:
    String str1 = "hello";
    String str2 = "llheo";
    Both Strings contain the same characters, but in a different order, so what would be the best technique to verify t that both Strings indeed contain the same characters?
    I was personally thinking along the lines of using the class, java.util.regex.Pattern?
    Any thoughts would me much appreciated. Thanks

    I would instead sort the characters, and then compare
    the sorted data.
    I'm fealing generous
        private static boolean anagram(String left, String right)
            if (left.length() != right.length())
                return false;
            char[] leftChars = left.toCharArray();
            char[] rightChars = right.toCharArray();
            Arrays.sort(leftChars);
            Arrays.sort(rightChars);
            return Arrays.equals(leftChars, rightChars);
        }

  • How to identify the psa table names in bi 7?

    Hi all,
    How to identify the psa table names in bi 7?  i need to know the psa table name in bi 7?
    as well as i need to check whether any historical data loads is there for psa for a particular period?
    How to filter for a particular data in the psa in bi 7?
    Thanks
    Pooja

    Hi Pooja,
    A)How to identify the psa table names in bi 7? i need to know the psa table name in bi 7?
    Double click on the PSA and CTRLSHIFTF5 --->in PSA properties -->PSA table ..u can find the name here ....
    B)as well as i need to check whether any historical data loads is there for psa for a particular period?
    usually as SAP best practise we will not keep data in PSA for not more than 30 days or at the amx 60 days..you may not find historical data here..however to find the oldest data -->Right Click >Manage>Give some old date ,say 01.01.2005 in the Request newer than ...and Refresh.....
    Other way is to find out in the Data provider i.e in the Cube or DSO ...
    How to filter for a particular data in the psa in bi 7?
    a)Do not map it
    b)in the DTP...Filter it ....i.e from PSA -->CUBE/DSO....
    c)Or write a routine also in start routine ...
    Rgds
    SVU123

  • How to choose the right processor speed for application

    Hi,
    Can any one help me to identify the right cRIO model.
    I want to choose the cRIO processor for an application. The cRIO- 9025, has processor of 800 MHz speed. Where as there is another cRIO model which comes with 400 MHz of the processor.
    How do I decide which model to choose?
    The mathematical calculations will help me to reach at a conclusion. I am not sure how to go ahead with the mathematical calculations.
    Can any one advise me on this.
    ThanX

    I don't think you will get any mathematical calculations telling you witch cRIO you have to use based on the level of information you have given.
    I don't think there are any mathematical calculations to decide witch cRIO a user can use. 
    You need to give a lot more information about what you are going to use cRIO for, before anyone can give you an advice.
    What does you setup look like ?
    Wwitch modules are going in the cRIO ?
    What are they doing ( input/output )?
    Are the cRIO interacting witch external systems?
    Are the cRIO only collecting data ? How fast ?
    What operation are the cRIO going to do ?
    Just a fewe of the questions you need to ask yourself. 

  • How to identify the system generated program for any standrd extraction?

    Hi all,
    How to identify the standard program generated for any extraction takes place. Is there any tcode to figure out the standard abap prgms for the datasource.
    for instance:
    for the data source : 2LIS_02_SCL what is the standard extractor program used.
    Thanks
    Pooja

    Hi hemanyt,
    i cant find the table RSTRAN active.
    Thanks
    Pooja

  • How to identify the user who created the variant

    Hi All,
    Can anyone tell me how to identify the user who created the variant ?

    Hi Dear,
    For the same go to SE11 and view the table "VARID". This table give the details of the program,user,variant etc.
    From this table u can know which user created the variant. Hope this solve your purpose.
    Regards

  • How can identify the default currency for a customer?

    How can identify the default currency for a customer?
    I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
    Blue

    Hi Gary,
    As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
    If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash

  • How to identify the type of pocketpc barcode scanner?

    How to identify the type of pocketpc barcode scanner whteher it is intermec or symbol?
    GS

    Hi,
    well, this is the brand of the PDA - the Scanner itself is build into the device. So if you have an intermec device - you have an intermec scanner and vice versa. It is not recommended to use a HP device for example with an external scanner. This scenario is not really supported by the MI setup guides.
    Hope that helps!
    Regards,
    Oliver

  • How to Identify the Type of Font Names in Illustrator

    How to identify the type of font names like "True Type font" (or) "open Type font" for illustrator file using Scripts or any language. Could you please advice me.
    Thanks,
    Prabudass

    If there is an Illustrator SDKor Illustrator Scripting forum, try
    that. ATM won't really help - it is obsolete and should not be
    installed (breaks things).
    Aandi Inston

  • How to identify the type of Fonts

    How to identify the type of font names like "True Type font" (or) "open Type font" for illustrator file using Scripts. Could you please advice me.
    Thanks,
    Prabudass

    The code below will prompt the user with the type face of a single text-frame.
    shastafir
    // 5/4/2009
    // Open a new document and create a single text box
    // with some type in it.
    // Get access to the active layer
    var aiDocument = app.activeDocument;
    var aiLayer = aiDocument.activeLayer;
    // Get access to the type-frame's font
    var textBox = aiLayer.textFrames[0];
    var theFont =
    textBox.textRange.characterAttributes.textFont;
    // Alert user with the name of the font
    alert(theFont.name);

  • How to identify the text color in a word doc.?

    how to identify the text color in a word doc.?
    I need to read a word document using java code. which contains many strings with different colors.
    i need to identify the color and giving the marks accordingly like
    test in blue color so
    test marks=2
    how can i do this using java. i only want to know how can i identify the text color using java code.?

    morgalr wrote:
    I guarantee it is not pretty.Indeed.
    I created a Word doc that simply has the word "Blue" in blue, then a space, then the word "Red" in red, all in the default font that Word started with (Times New Roman). The resulting document is 24,064 bytes. It starts off with 80 bytes of various hex values, mostly 0x00.Then 432 bytes of just 0xFF. Then 2048 bytes of various hex values, mostly 0x00. Then the text "Blue Red" (which appears twice more in the file). And so on...
    Edited by: jverd on May 10, 2010 8:45 AM

  • How to identify the variable processing type

    Hi Experts,
    How to find the details of the variable whether it is filling with user exit or replacement path
    Say i have a variable xxx , how to identify the above details.
    Thanks,

    use RSZGLOBV table in VNAM give your variable and VPROCTP will give you processing type

  • When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

Maybe you are looking for