How to implement this scenario:

Suppose there are 6 men and 4 women in the class, then if all the source files are read successfully then the target directory for men should have 6 files and the target directory for women should have 4 files.

Hi,
are you telling that in one xml you will have 6 men in the source file. then in the target you need separate file for each man?
if yes you can do that using multi mapping. you also have option recordsetpermessage in sender FCC.
please explain if i did not get you.
Regards,
Muni.

Similar Messages

  • How to implement this Scenario(JMS to IDOC)

    Hi Frnds,
    I am working on one scenario JMS to IDOC .based on JMS Message my XSLT Mapping will genarate Multiple Idocs(max 3) or 2 or one.
       I have to send this IDOCS based on some conditions,the conditions mentioned below.
    xslt mapping genarats one message ,but this contains 3 IDOCS or 2 or 1.(Order Create , Order Change and Order Response),
    what is the best approach to implement this scenario
    1)f Order Create  segment exists (new PO), first check SAP to see if PO does actually exist using RFC Z_BBPR46_GET_PO_FROM_FPA ,If it does not exist, pass Order Create idoc to SAP to create new purchase order
    If it does exist, retrieve PO details from RFC and pass Order Change idoc to SAP to update existing purchase order
    2)If Order Change segment exists (change PO), retrieve PO details using RFC Z_BBPR46_GET_PO_FROM_FPA and pass Order Change idoc to SAP to update existing purchase order
    3)If Order Response segment exists (goods movement), retrieve PO details using RFC Z_BBPR46_GET_PO_FROM_FPA and pass Order Response idoc to SAP to create goods movement.
    Above logic i implemented in one mesage mapping Source is XSLT Mapping Output and Receiver message in message mapping is Multimapping selected 3 IDOCS.
    Regards,
    raj

    thanks

  • Webinar: How to implement secure scenarios with SAP NW PI 7.1

    SAP Intelligence Platform & NetWeaver RIG APJ Expert Call
    Dear valued SAP Experts,
    Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, August 18.
    The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers  during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at
    thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
    Tuesday, August 18, 2009:
    How to implement secure scenarios with SAP NetWeaver Process Integration 7.1
    Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
    This event will feature Makoto Sugishita with the SAP Intelligence Platform & NetWeaver Regional Implementation Group.
    Makoto provides the following abstract:
    In this session you will learn more about the core security concepts that are provided with the service-oriented architecture (SOA)
    management capabilities in SAP NetWeaver Process Integration (SAP NetWeaver PI). This session will cover main use cases and
    supported scenarios of secure SAP NetWeaver PI deployments. 
    SAP Connect Link: https://sap.emea.pgiconnect.com/I016095
    (no passcode needed)
    Dial in:
    For dial in details please register here http://www.surveymonkey.com/s.aspx?sm=EFeuZl9PxrwKOW5i5W556g_3d_3d
    Kind regards,
    Sarma Sishta
    SAP Intelligence Platform & NetWeaver RIG APJ

    hi,
    I'm making this a sticky thread till August 18 so it will have better visibility
    Regards,
    Michal Krawczyk

  • May i know how to develop this scenario

    Hi Experts,
             can any one help in this scenario, i am getting data from different external system (data comes as flat files from 3 different leagasy systems,  aswell from oracale data base),  i want to post these data to Payroll system(R3). may i know how many file adapters and communicatoin channles do i requre to implement this scenario.
    thanks,
    dhanush

    Dhanush,
    As far as my understanding from ur scenario. You need BPM to achiveve the same.
    You need 4 communication channels from sender side and one receiver channel.
    3 sender channels pointed to 3 different legacy systems and 1 communication channel for Oracle.
    Mapping logic must be N:1
    BPM Logic.
    Fork (4 branches )-->Place receiver step on each branch and check all of them to start the process ---> Transformation step(N:1 Mapping) -
    >Send
    Hope it helps!!
    -raj.

  • How to implement this in Oracle Apps 11i

    Hello Friends
    I am working as a consultant for a manufacturing company.
    They have a format for charging Excise and Sales tax on their products (example below). I dont know how to implement this using oracle apps. Please help me ASAP.
    eg.
    Product A:
    MRP = Rs. 100
    Assessable Value (i.e. the value at which I have contract with the Government to pay Excise Duty) = 60% of MRP = Rs. 60 in this case.
    Excise Duty = 16% of AV =0.16*60 = Rs. 9.6
    Now, let’s suppose I am selling my product to a dealer at 30% discount.
    Therefore, Sale Price = 70% of MRP = Rs. 70
    Sales Tax = 4% of Sale Price = 0.04*70 = 2.8
    Therefore, total revenue from the deal = 70-9.6-2.8 = Rs. 57.6

    you can use Advance Pricing or creating discount or attiribute while calculating.
    this is not much complex, possible even with Advance Pricing too. Thanks
    Shiv

  • How to implement this code in labview?

    How do implement this pseudo code in labview? Please keep in mind "a" and "c" in the code below ARE VARIABLES
    for i =0 to i=maxvalue
           if i <= a 
               output = output2
           else if i > a AND i<=c
               output = output2
           else if i < c 
               output = output3
           else i = d
               output = output4
    I understance i can use a case structures and modify the label, but i do not know how to make the label dependent on a variable value. 
    Thanks 

    Try an array of boudaries and use threshold array. See this old example:
    Now just iterate over an array of values using a FOR loop.
    LabVIEW Champion . Do more with less code and in less time .

  • How to implement this attribute ?

    Hi,
    I've this problem.
    In our application to control healthcare expense I've implemented a cube with 6 dimensions. (here for who knows Italian : http://www.oracle.com/global/it/customers/profiles/profile_77.html )
    The biggest dimension is the "patient" one, with 1.500.000 units at 5th level, grouped in geographic aggregates, until the entire city at highest level.
    Now customers wants to have the possibility to select patiens with chronic disease from these. There are about 500 kinds of chronic diseases.
    Every patient can have no one, one, or (and this is the problem) more then one of these chronic disease.
    How to try to implement this? as a new dimensions or as an attribute ?
    I've thought that best way is to introduce a new (chronic diseases) dimension, to have a way to select one or more of these diseases at all levels of patient dimension.
    I'm asking how to solve the problem that a single patien can also have more than one disease.
    Is there any way to implement this ?

    thanks to everyone for the answers
    I've some questions.
    to olapworld:
    have you any sample code to show me how to implement the dimensionalized valueset and the customizations needed ??
    to scott:
    I think I'm not understanding your suggestion:
    my target is to add the "ilnesses" selection to other ones. The most important cube of my applications analyze
    healthcare expenses from six dimensions. Customer wants analyze cube "adding" a way to select only "ilnesses" patients and elvaluate their expense.
    I'm in doubt becouse a patient can also have more then one ilness, so I can't simply add a "ilnesses" dimensions to the cube and mapping it to an "ilness_id" in the fact table.
    How can the two dimensioned cube to help me in this ?
    to Rafalm1:
    in any case, implementing Count(Distinct patient) would be useful for me, to have a way to count the number of patients who had a healthcae assistence. Can you suggest me how to implement this ?

  • How to implement this aggregate logic at target column in odi inteface mapp

    sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
    how to implement this aggregate logic at target column in odi inteface mappings

    Hi
    if you don't want to aggregate try to define a user function
    analytic_sum($(value))
    implémented by
    sum($(value))
    after that
    replace your
    sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
    by
    analytic_sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)

  • How to implement this scenerio in the workflow - More details given Inside?

    We are implementing a simple PO release workflow in ECC 5.0. The workflow just has a decision step and a release step. We have implemented the workflow in our system and it seems to be working fine.
    Problem Statement:
        The client has many Purchase Order Administrators or Purchasing clerks who needs to approve the PO. But the client does not have many user logins or license to have more users in SAP. So they are checking if it is possible to have the workflow in SAP but to execute the workflow from outside SAP by using one user login.
    To be more specific, Here is what they are asking.
    1). They want that SAP must send a work item to their lotus notes inbox with a URL link in the email.
    2). The user will open the email from Lotus notes and then click on the URL link which might be something similar to the decision work item. The user will select YES or NO which is similar to clicking approve or reject
    3). Once the user has made a decision by clicking on the URL in the email they want that the PO should be released in SAP with a common user ID say WF-BATCH.
    4). We cannot use Extended notification as we would like to have only one user WF-BATCH for approval but send emails to all the Purchasing clerks. I believe that the extended notifications can only send emails to the id configured in the user master. Since the client wants to have only one user in SAP but many PO approvers  outside SAP.
    My questions:
    1). Can we configure extended notifications in workflow such that the system sends emails to different purchasing clerks in their lotus notes inbox? If yes then how can I configure that?
    2). If it is not possible then how do we achieve the requirement from outside SAP but still have the workflow?
    3). If we need to implement some external bespoke solutions then what all things would be involved? Any guidance on how this scenario can be achieved and what issues we may have?
    4). How can we trigger a workitem from outside SAP but still make it work as if it would have been triggered from SAP. Can we call some RFC FM to trigger the workitem and force a single user id?
    Any suggestions are welcome. Thanks in advance.
    any idea guys?
    Edited by: Workflow  learner on Jul 28, 2008 11:22 AM

    Well, apart from the obvious licensing issues which you should definitely discuss with your account manager, that's going to fail any audit. The 'signature' on the approval is the user's login, so if approvals are done by a common userid you will need to put a new authentication mechanism in place.
    The two major issues are:
    Forwarding - how do you control someone forwarding it to someone else to approve?
    Traceability - how can you prove who really approved it?
    This is not a small project. Much of this depends on your internal infrastructure, you will need to get Basis, Security, Networks, and Mail people involved, we cannot really help you much at this point.
    Sorry it's not the answer you want to hear.
    Good luck,
    Mike

  • How to implement this calendar function in ABAP code

    Hi everyone,
    Our requirement is : Give a date (e.g. YYYY.MM.DD, 1983.12.26), then we need to know which weekday it is. Is there a existing FM for this fuction? or how to implement it in ABAP?
    Thanks a lot for any hint
    Best regards
    Deyang

    Hi Deyang Liu,
        Could you please check these the below links they would give you some idea ....[SAP Calendar Control|http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/BCCICALENDAR/SAP_KALENDER.pdf]
    [Calendar functions |http://help.sap.com/saphelp_nw04/Helpdata/EN/2a/fa00f6493111d182b70000e829fbfe/content.htm]
    [SAP Functions|http://abap4.tripod.com/SAP_Functions.html]
    [Determine calendar |http://help.sap.com/saphelp_nw04/helpdata/en/2a/fa00e9493111d182b70000e829fbfe/content.htm]
    Regards,
    S.Manu

  • How to implement this logic in odi

    suposse my table is like this
    a b c
    1234 01-JAN-09 0
    1234 02-JAN-09 1
    1234 05-JAN-09 1
    1244 06-JAN-09 1
    1234 10-JAN-09 0
    1234 13-JAN-09 1
    1234 25-JAN-09 0
    1234 27-JAN-09 1
    1234 30-JAN-09 1
    1235 01-JAN-09 1
    1235 02-JAN-09 0
    1235 05-JAN-09 1
    1245 06-JAN-09 1
    1235 10-JAN-09 1
    1235 13-JAN-09 3
    1235 25-JAN-09 2
    1235 27-JAN-09 0
    1235 30-JAN-09 0
    i want out put like this
    a b c
    1234 01-JAN-09 0
    1234 02-JAN-09 1
    1234 05-JAN-09 2
    1244 06-JAN-09 3
    1234 10-JAN-09 3
    1234 13-JAN-09 4
    1234 25-JAN-09 4
    1234 27-JAN-09 5
    1234 30-JAN-09 6
    1235 01-JAN-09 1
    1235 02-JAN-09 1
    1235 05-JAN-09 2
    1245 06-JAN-09 3
    1235 10-JAN-09 4
    1235 13-JAN-09 7
    1235 25-JAN-09 9
    1235 27-JAN-09 9
    1235 30-JAN-09 9
    to get out put like that iam using this query
    select a,b,sum(c) over(partition by a order by b) from table.
    how to implement "sum(c) over(partition by a order by b)" in odi interface mappings

    Hi
    if you don't want to aggregate try to define a user function
    analytic_sum($(value))
    implémented by
    sum($(value))
    after that
    replace your
    sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
    by
    analytic_sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)

  • How to implement this function in JSP/Servlet env?

    Hi all,
    I working on a project, it provides functionality to upload file using JSP/Servlet. In the first JSP page, there is file location and submit button. After user select a file to upload and click submit button, a message, like "sending file to XXXX", will be shown on the screen. Once uploading and validation are done on the server-side, a successful/error msg will be shown to user.
    Here I have a question for the "sending..." msg and the successful/error msg. They should be put in one jsp page or in two separate page? how to implement them?
    Thanks for any help!
    Tranquil

    For the sending message... Well, the thing is, when you click submit, it's sending the file to the server and the server is processing it, and this is all done before the "complete" page is sent to the server. So one would need to use some Javascript on the page before the actual submit happens to show some message. This is done on Ebay when you put something for sale, you can upload an image, and there is a little popup message telling you that it's uploading, and it is removed when the process is done. Now, I'm not sure the exact details of how this works, but my educated guess is this:
    1) The onsubmit function of the form checks that the file upload fields have a value (no need to popup a message if no file upload, since that's what usually takes the time, although it could just be assumed there is a file). If a file is to be uploaded, or just want to show the message anyway, a new popup window is opened with the window.open method and the "sending" message is shown (either written via Javascript or just load a small web page to the window).
    2) The popup window, since you can't transfer the window object from the form page to the next page, has to check window.opener for some value that the success/error page would have to set. The success/error page could use it's body onload function to set a variable in it's own window object to denote that the page is loaded. The popup window can use a looping check using setTimeout or setInterval in Javascript to check for window.opener.isLoadedVariable to be present, and if so, close itself.
    I've never done that, but I see no reason why it wouldn't work.

  • How to implement this typical sign workflow? Urgent

    Hi Adobe Experts,
    I am new to LC (two months only). Recently company is doing some evaluation on LC 8.2 and my boss assigned the following task to me  (I simplified it):
    Form: (Enclosed)
    * Two text fields: CommentTextField1 and CommentTextField2
    * Two signature fields: SignatureField1 and SignatureField2
    I've associated the SignatureField1 to lock CommentTextField1 and associated the SignatureField2 to lock CommentTextField2.
    The progress to implement is:
    Step 1) Ray Woodard open the form in workspace, type in CommentTextField1, Sign the SignatureField1, Submit.
    Step 2) Alex Pink open the form in workspace, type in CommentTextField2, Sign the SignatureField2, Submit.
    Any suggestions on how to implement the progress? Please help! Thanks a lot!
    (What I am able to accomplish so far is the step 1, but I am not confident about that. Please point me the right solution. Should I use xfaForm or Document Form, render/submit as default or PDF, submit as XDP or PDF etc...? I am so confused and frustrated now!)

    Steve, thank you so much!!!
    Your example helped me a lot. I am able to run the process, but I still have three doubts:
    1) When I set "Submit As" to "PDF" rather than "XDP" by default, I am not able to submit the form in the workspace client with "Adobe Reader" installed. But I am able to submit the form in the workspace client with "Adobe Acrobat" installed. Is it normal?
    2) What does "Form Bridge" do in this whole process here?
    3) If I don't want to hard code the submit URL  in the form, do I have another option, like using other renders?
    Thanks again!
    Wayne

  • How to implement this need help

    I created a datacontrol for a named query which (using Ejb entity beans) which accepted a employee id and click on find show me the respected employee details in a table.
    case 1: In one single page
    when i added the form consisting of a single text box , button and the table to show the result of the find method in one single page it worked out perfectly,,,
    case 2 : using 2 different pages
    But then i tried adding only the form in one page named page1 and and the table to show the result in another page i.e page2 , Also in the command action of find button of page1 i asked it to redirect to page 2 and show result . But it never showed me any results..
    Question :
    1) How to implement case2 i.e to have a form on one page and the resultant table to be show on another page i.e When users sees first page he adds the employee id in text box and clicks find .The user then needs to be redirected to page2 and the result of search should be shown in table...
    Can anyone guide me over this... ???

    Hi,
    you use a method on the EJB that takes a argument (e.g. the employee ID). You then put the method result set on page 2 (the method argument shall be pointed to a request or session attribute using EL : #{sessionScope.EmployeeId}
    On the search page - when the user hits the search button - you set the attribute "EmployeeId" in the session before navigating to the next page
    Frank

  • How to implement this Java Script?

    Hello,
    I have this script to remove the link from titles of web parts.  I am new to SharePoint 2013 development. I am not sure where to put it. Not sure what file to put it and how to implement it.  How can ensure this code gets run on pages through out
    my SharePoint 2013 site.
    jQuery(document).ready(function () {
           $('a').filter("[href='###']").each(function () {
            $(this).replaceWith($(this).html());
    Reference
    https://expectedexception.wordpress.com/2012/01/30/how-to-remove-the-list-view-web-part-title-bar-link/
    Paul

    Get the page Url from the website and go to Sharepoint Designer and browse the page and add the script within a scritp tag <script>jQuery(document).ready(function
           $('a').filter("[href='###']").each(function () {
            $(this).replaceWith($(this).html());
     });</script>
    how to open a site in SP Designer:
    https://support.office.com/en-ie/article/Open-a-SharePoint-site-94d33d70-3f07-4a8e-b5b5-1137a9c36e74
    another option is to find the global file that contain the scripts and add it as a method there. You can check these files by viewing source of the page.
    note also that the Jquery reference is needed for this code to execute.
    Fouad Roumieh

Maybe you are looking for