How to import a table from another database using DB toolset.

Hello All
I would like to import a table from one database to another using DB toolbox.
I do not want to import all data to LV and then save them to another database. Instead I would prefer to use SQL syntax.
Does anobody know how to write SQL command to import whole table from one database to another?
I have found in some SQL manual that INSERT INTO should work, but JET4 returns an error that table (e.g. c:\mydatabase\table1) can not be found.
Thanks in advance
Pawel

if i don't have TEST table on server B whether COPY command will create this table on server B with the same structure ? If you specify CREATE as a clause the table will be created:
SQL> help copy
COPY
COPY copies data from a query to a table in a local or remote
database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
COPY {FROM database | TO database | FROM database TO database}
            APPENDCREATE|INSERT|REPLACE} destination_table
            [(column, column, column, ...)] USING query
where database has the following syntax:
     username[password]@connect_identifier

Similar Messages

How to import a table from another oracle database ?

Hi all ,
i could like to use pl/sql to import one table from another oracle database server ?
is it possible to do this ?
A server B server
table: test <------------------------> table : newtest
the tns profile already configurated . the connection is ready .
thanks a lot !
Best Regards,
Carlos

if i don't have TEST table on server B whether COPY command will create this table on server B with the same structure ? If you specify CREATE as a clause the table will be created:
SQL> help copy
COPY
COPY copies data from a query to a table in a local or remote
database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
COPY {FROM database | TO database | FROM database TO database}
            APPENDCREATE|INSERT|REPLACE} destination_table
            [(column, column, column, ...)] USING query
where database has the following syntax:
     username[password]@connect_identifier

OMBPLUS - How to import a table from the database

I have a table that is out of sync with its database definition. In OWB, I would go to the Tables section and select Import and re-import the file in. How do I script this in OMBPLUS.

If I do the OMBRETRIVE TABLE 'CUSTOMER' GET COLUMNS then all I get is a list of columns displayed in OMBPLUS. Doing a OMBCOMMIT does not modify the table in the OWB repository. It still does not have the new columns.
Also, when I import a table from the GUI, I UNCHECK the two advanced options of: 'Preserve repository added constraints' and 'Preserve repository added columns'. I also get to select from the GUI I get to choose how many levels of foreign key constraints to retreive. How do I specify these in the OMBPLUS script as well.

How can i get data from another database SQL Server use database link from

I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar

Query with Tables from another Database

Hi.
I have a problem with a Query that executes a stored procedure that inserts data in a Table from another DataBase. The problem is when I try to execute a Query with the data related of that table using the user parameters of SBO ('[%0]'....'[%3]'). I use the following parameters for reference to the Table:
"....FROM [-BDName-].[dbo].[-TableName-] T1..... "
Any suggestions? Thanks a lot....
(Suggestions in English or Spanish)

None

How to update date in a table from another database

Hello,
I am trying to code a way to Update my Testing database from another database. In the coding below the database that has the updated data ends in Restore.
Use ClientDB_MASTER_Restore
Truncate Table ClientDB_MASTER_Testing.dbo.Activity_Tracking_AZ
GO
SELECT * INTO ClientDB_Master_Testing.dbo.Activity_Tracking_AZ
FROM Activity_Tracking_AZ
Go
I know with this Technique the table must be truncated if not deleted first. There is probably a better way to do this which I'm very open to. I'm also looking for coding that will roll back any changes made should an error occur.
As always, any help is greatly appreciated.
David92595

USE ClientDB_MASTER_Testing
go
SET XACT_ABORT ON
BEGIN TRANSACTION
Truncate Table dbo.Activity_Tracking_AZ
-- SET IDENTITY_INSERT dbo.Activity_Tracking_AZ ON
INSERT dbo.Activity_Tracking_AZ (col1, col2, ...)
SELECT col1, col2,
FROM ClientDB_MASTER_Restore.dbo.Activity_Tracking_AZ
-- SET IDENTITY_INSERT dbo.Activity_Tracking_AZ OFF
COMMIT TRANSACTION
If you find it boring to type the column lists, just find the table in Object Explorer, and drag the columns node to where you want the column list.
You need the SET IDENTITY_INSERT command if the table has an IDENTITY column.
By wrapping the code in a transaction, you are not left with an empty table if the INSERT fails. The command SET XACT_ABORT ON makes sure that the batch is aborted and rolled back in case of an error.
Erland Sommarskog, SQL Server MVP, [email protected]

How to update one table from another

I am creating scripts in Oracle 10g. I have a table that has data corruption on three date fields.
I created a table with the following sql of all the affected rows:
CREATE TABLE LSU_INTER_FIX_DATE AS
select request_id,received_date,planned_start_date, actual_start_date
from lsu_inter2_requests_t
where received_date < to_date('01-JAN-1900')
OR planned_start_date < to_date('01-JAN-1900')
OR actual_start_date < to_date('01-JAN-1900')
I then repaired all of the rows with three data fixes
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET planned_start_date = TO_CHAR(planned_start_date,'YY-MON') ||'-'||(TO_CHAR(planned_start_date,'RRRR') + 2000)
where planned_start_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET actual_start_date = TO_CHAR(actual_start_date,'YY-MON') ||'-'||(TO_CHAR(actual_start_date,'RRRR') + 2000)
where actual_start_date < to_date('01-JAN-1900')
I now want to update the original base table with the corrected data so I wrote the following SQL UPDATE command:
UPDATE lsu_inter2_requests_t aaa
SET aaa.received_date = bbb.received_date
FROM LSU_INTER_FIX_DATE bbb WHERE aaa.request_id = bbb.request_id
When I run this sql Oracle returns the error “ORA-00933 SQL command not properly ended.” How do I update multiple rows in one table from another table that share the same primary key?

Comet wrote:
I am creating scripts in Oracle 10g. I have a table that has data corruption on three date fields.
I created a table with the following sql of all the affected rows:
CREATE TABLE LSU_INTER_FIX_DATE AS
select request_id,received_date,planned_start_date, actual_start_date
from lsu_inter2_requests_t
where received_date < to_date('01-JAN-1900')
OR planned_start_date < to_date('01-JAN-1900')
OR actual_start_date < to_date('01-JAN-1900')
I then repaired all of the rows with three data fixes
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET planned_start_date = TO_CHAR(planned_start_date,'YY-MON') ||'-'||(TO_CHAR(planned_start_date,'RRRR') + 2000)
where planned_start_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET actual_start_date = TO_CHAR(actual_start_date,'YY-MON') ||'-'||(TO_CHAR(actual_start_date,'RRRR') + 2000)
where actual_start_date < to_date('01-JAN-1900')
I now want to update the original base table with the corrected data so I wrote the following SQL UPDATE command:
UPDATE lsu_inter2_requests_t aaa
SET aaa.received_date = bbb.received_date
FROM LSU_INTER_FIX_DATE bbb WHERE aaa.request_id = bbb.request_id
When I run this sql Oracle returns the error “ORA-00933 SQL command not properly ended.” How do I update multiple rows in one table from another table that share the same primary key?I am not convinced you have what you think you have
>
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
When you want to produce a DATE datatype when starting with a string,
you must use TO_DATE() on the SET line!
(TO_CHAR(received_date,'RRRR') + 2000)since when do you do add characters (from TO_CHAR) with a constant number (2000)?
You should NEVER EVER rely on implicit datatype conversion
Edited by: sb92075 on Jul 27, 2011 7:09 PM

Simple: How to copy a Table from one Database to another?

I already know how to do it by creating an identical table and then inserting the Data.
Like so:
SET IDENTITY_INSERT dByDtMinusC5 ON
INSERT INTO [DB1]..T1 ([Id], [HbyD] , [K] )
SELECT [Id], [[HbyD]]] ,[K] FROM [DB2]..T2
As you can see I need to have T1 in order to copy T2 into DB1. Is there any way that I could auto create T1 and copy T2?
There are so many forums in sql server Category, I hope I posted in the right one :0 . We need tag system for forums.

Hi Bhupinder,
According to your description, you want to copy a table with Primary keys from one database to another database.
As per my understanding, I think the best method is use Transfer SQL Server Objects Task in SQL Server Integration Services. The Transfer SQL Server Objects task transfers one or more types of objects in a SQL Server database between instances of SQL Server.
Server roles, roles, and users from the specified database can be copied, as well as the permissions for the transferred objects. Indexes, Triggers, Full-text indexes, Primary keys, Foreign keys can also be copied.
To use the Transfer SQL Server Objects Task, we should create a SQL Server Integration Services Project in SQL Server Data Tools, then drag a Transfer SQL Server Objects Task to Control Flow pane. Specify SourceConnection, SourceDatabase, DestinationConnection
and DestinationDatabase for the Connection, select the table in the ObjectsToCopy category, then change CopyPrimaryKeys to True and the other corresponding properties in the task.
References:
Transfer SQL Server Objects Task
Transfer SQL Server Objects Task in SSIS 2008 R2 With Example
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to import new tables from database

I have relational source in OWB. I had added a new table in teh database, now I donot know how to import this new table in OWB9i?
I will appreciate your help.
Thanks
Syed

Mark,
I am sorry I did not explain the problem clearly. I created module of the relationa source and then using DB link I had imported all the tables from schema A , but my question is that I had created a new table in the Schema A and I want to just import that table in my relation resource module. Is there a way to do it in OWB? How do we create just on etable in OWB module?
Thanks
Syed

Select table from another database

Hello
Consider 2 oracle databases: A and B.
How can i create a table in database A receiving records through a select statement to a table Z in database B?
Is this possible?
I thank in advance all your replies!

You need to create a database link on table A which points to the correct schema on table B.
Note that there needs to be an entry in the tnsnames.ora file (assuming you're using local naming) on server A which points to the database on Server B.
Then you just reference the table via the database link.
eg select * from dual@TNSB would access the dual table on server B.
(assuming TNSB is the database link name)
If you use v$instance rather than dual (and have appropriate privileges) you will see the servername of server b rather than server a.
Edited by: Keith Jamieson on Oct 1, 2008 3:13 PM

How to design universe with tables from two databases using a db link?

I am building a universe (v3.1) that has tables from two different oracle db instances. My dba created synonyms for me and there is a database link in place. I don't know how to get this working in Designer. I can see the views under my ID when I browse to insert a table, but there is no structure. I think I have to create a new strategy. I attempted to do that, but the directions aren't very clear to me, and it isn't working. Any help or advice would be greatly appreciated. Thanks!!

i've been working with DB links much before, but this was since long time ago before i join the Business Intelligence field
from my understanding that you Have link from DB1 to DB2
and from your user in DB1 you can access tables and view from DB2
if you are using your user to create a universe im not sure if you can use tables from DB2 or not
and you dont see the tables of the link in the Universe
but you can try to create a drived table selecting from any tables from DB2
for example
select id,name from user.table2@mylink
check this way and give me your feedback
good luck

How to import a clip from another Imovie movie ?

I have imported with Imovie HD in two distinct movies some clips that I wish to merge in one larger movie.
What is the simplest way to merge two movies ?
What is the simplest way to import just one clip from another movie ?
Thanks !!!
Luc

Well I found where those clips were trashed too. Its not the iMovie trash can as indicated by the help text! Its the user trash can. Here is how I found my clips in case this is useful for anyone else.
find . -name '*.dv' -exec ls -l {} \; | grep Trash
-rw-r--r-- 1 aspencer aspencer 105600000 11 Dec 10:53 ./.Trash/Clip 251 copy.dv
-rw-r--r-- 1 aspencer aspencer 105600000 11 Dec 10:45 ./.Trash/Clip 251.dv
-rw-r--r-- 1 aspencer aspencer 88560000 11 Dec 10:44 ./.Trash/Clip 252.dv
-rw-r--r-- 1 aspencer aspencer 91560000 11 Dec 10:45 ./.Trash/Clip 253.dv
-rw-r--r-- 1 aspencer aspencer 53760000 11 Dec 10:45 ./.Trash/Clip 254.dv
-rw-r--r-- 1 aspencer aspencer 61320000 11 Dec 10:45 ./.Trash/Clip 255.dv
-rw-r--r-- 1 aspencer aspencer 179640000 11 Dec 10:46 ./.Trash/Clip 256.dv
-rw-r--r-- 1 aspencer aspencer 197880000 11 Dec 10:47 ./.Trash/Clip 257.dv
-rw-r--r-- 1 aspencer aspencer 69960000 11 Dec 10:47 ./.Trash/Clip 258.dv
-rw-r--r-- 1 aspencer aspencer 48720000 11 Dec 10:47 ./.Trash/Clip 259.dv
-rw-r--r-- 1 aspencer aspencer 146280000 11 Dec 10:42 ./.Trash/Clip 260.dv
-rw-r--r-- 1 aspencer aspencer 45120000 11 Dec 10:42 ./.Trash/Clip 261.dv
-rw-r--r-- 1 aspencer aspencer 78000000 11 Dec 10:42 ./.Trash/Clip 262.dv
-rw-r--r-- 1 aspencer aspencer 66960000 11 Dec 10:43 ./.Trash/Clip 263.dv
-rw-r--r-- 1 aspencer aspencer 311280000 11 Dec 10:44 ./.Trash/Clip 264.dv
-rw-r--r-- 1 aspencer aspencer 104160000 11 Dec 10:44 ./.Trash/Clip 265.dv
-rw-r--r-- 1 aspencer aspencer 40200000 11 Dec 10:44 ./.Trash/Clip 266.dv
To see the total space taken up by these files I did:
find . -name '*.dv' -exec ls -l {} \; | grep Trash | awk 'BEGIN { space = 0}; { space += $5}; END { print "total space",space}'
total space 1794600000
So I just have to empty the main trash in order to recover from my first copy/paste effort to move clips from one project to another. BTW is there a way to copy them to the clips pane and not the timeline?
Alex Spencer

How to update one table from another table?

Hi,
Please go through the case I am mentioning below and if possible try to provide with a solution.
I am working on a report to generate cash flow forecast, where in one of the fields is "Payroll", in which its being mentioned as:
In the selection screen: I am entering Project ID, profit Center and Period(in MM/YYYY format).
Selection of all entries in table COSP for selected cost elements above, value type 1, version , all periods and for all selected WBS elements and all objects underneath.
From this, update table COFP with information from COSP with value type 62 and same period.
For updation of various fields the following information is being given.
How should we update COFP?
New entries per OBJNR/PERIO and HKONT are required via using the information from COSP:
COFP-MANDT              =          SY-MANDT
COFP-KOKRS              =          if COSP-OBJNR begins with PR
                                               Check table PRPS with COSP-OBJNR = PRPS-OBJNR and enter PRPS-PKOKR
                                                If COSP-OBJNR begins with NV
                                               Check table AFVC with COSP-OBJNR = AFVC-OBJNR,
go to Table AFKO with AFVC-AUFPL,
go to table AUFK with AFKO-AUFNR and enter AUFK-KOKRS
If COSP-OBJNR begins with OR
Check table AUFK with COSP-OBJNR = AUFK-OBJNR
and enter AUFK-KOKRS
COFP-BELNR               =          Check table NRIV, CLIENT = SY-MANDT, OBJECT = RK_BELEG,
SUBOBJECT = COFP-KOKRS, NRRANGENR = 05,
Add 1 to NRLEVEL and begin with 500000000
Use same BELNR for one update-run
COFP-BUZEI                =          1 + and 1 in next entry but same update-run
COFP-TWAER              =          COSP-TWAER
COFP-ZHLDT                =          always last day of month in field COFP-PERIO
COFP-GJAHR               =          COSP-GJAHR
COFP-PERIO               =          if entry in field WKG001 à PERIO = 001
                                               If entry in field WKG006 à PERIO = 006
COFP-WRTTP              =          62
COFP-VRGNG              =          FIPL
COFP-POSIT                =          Check table SKB1 where SAKNR = COSP-KSTAR and use SKB1-FIPOS
                                               for going to table FMCI-FIPOS and enter FMCI-POSIT
COFP-OBJNR               =          COSP-OBJNR
COFP-HKONT              =          COSP-KSTAR
COFP-WKGBTR           =          WKGXXX
COFP-WKGBTRO         =          -
COFP-WTGBTR            =          WTGXXX
COFP-WTGBTRO         =          -
COFP-WOGBTR           =          WTGXXX
COFP-WOGBTRO        =          -
COFP-BUKRS1            =          -
COFP-GJAHR1             =          -
COFP-BELNR1             =          -
COFP-BUZEI1              =          -
COFP-BUKRS2            =          -
COFP-GJAHR2             =          -
COFP-BELNR2             =          -
COFP-BUZEI2              =          -
COFP-EBELN               =          -
COFP-EBELP               =          -
COFP-ZEKKN               =          -
COFP-ETENRM            =          -
COFP-STUNR               =          -
COFP-LIFNR                =          -
COFP-KUNNR              =          -
COFP-GSBER              =          -
COFP-BUKRS              =          (nearly same as COFP-KOKRS!)
                                               if COSP-OBJNR begins with PR
                                               Check table PRPS with COSP-OBJNR = PRPS-OBJNR and enter PRPS-PBUKR
                                                If COSP-OBJNR begins with NV
                                               Check table AFVC with COSP-OBJNR = AFVC-OBJNR,
go to Table AFKO with AFVC-AUFPL,
go to table AUFK with AFKO-AUFNR and enter AUFK-BUKRS
If COSP-OBJNR begins with OR
Check table AUFK with COSP-OBJNR = AUFK-OBJNR
and enter AUFK-BUKRS
COFP-EINDT                =          -
COFP-SGTXT               =          -
COFP-GEBER              =          -
COFP-KURSF              =          -
COFP-KUFIX                =          -
COFP-GBETR              =          -
COFP-KURSR              =          -
COFP-KURSFIKRS       =          -
COFP-KZKRS               =          -
COFP-UMBKZ              =          -
COFP-KBLNR               =          -
COFP-KBLPOS            =          -
COFP-HI FIVOR            =          -
COFP-LO FIVOR          =          -
COFP-HI ACCOUNT      =          -
COFP-LO ACCOUNT     =          -
COFP-HI LIFNR            =          -
COFP-LO LIFNR           =          -
COFP-HI KUNNR          =          -
COFP-LO KUNNR         =          -
COFP-XDELETE           =          -
COFP-HI XOPVW         =          -
COFP-LO XOPVW        =          -
COFP-ZAEHK               =          -
COFP-CHAINBELNR     =          -
COFP-MWSKZ             =          -
COFP-LEDNR               =          -
COFP-BELTP               =          1
COFP-VERSN              =          0
COFP-OWAER             =          COSP-TWAER
COFP-CPUDT               =          SY-DATUM
COFP-CPUTM              =          SY-TIME
after doing updation, its again saying Selection of all entries in table COFP with value type 51 to 62, selected year, selected cost elements above and for all selected WBS elements and all objects underneath. Summarisation by period.
Now, can someone help me as how to proceed with the entire thing? An elaborate and illustrative answer would be highly appreciable.
If you require any other information....then get back to me ..asap.
Its bit urgent.
Thanks & Regards,
Ravi

Hi
update <table> from <i_tab>
for different conditions.
loop at i_cosp.
if cosp-mandt eq sy-mandt and cosp-objnr eq 'PR'.
Read table i_PRPS with key i_PRPS-OBJNR = i_COSP-OBJNR.
if sy-subrc eq 0.
update PRPS set PKOKR = ? where objnr = i_prpr-objnr.
endif.
endif.
similarly for all the conditions
Regards
Message was edited by: Harikishore Sreenivasulu

How to import tablesfrom excel sheet to database using sqldeveloper

hi dear,
i have lots of tables without data in excell sheet. i want to import all the tables in to data base using sql developer .how to import pls help me

No one here is your 'dear' so please don't use such terms.
Whenever you post provide your sql developer version.
>
i have lots of tables without data in excell sheet. i want to import all the tables in to data base using sql developer
>
You will need to provide an example of what you mean by a table without data.
What database and what version. What do you expect to end up with in the database after such an 'import'?

How to access attribute value from another VO using groovy?

Hello, I am using JDeveloper 11.1.2.3.0
I read a lot of information about this but still I am missing something. I am trying to set the value of a bind variable through Groovy expression in my VO. I want this Bind variable
to have the value from an attribute from another VO. I tried ''adf.object.MyAppModuleImpl.findViewObject('Users1').currentRow.Iduser''
I am getting "oracle.jbo.expr.JISyntaxError: Variable MyAppModuleImpl not recognized". I tried with 'MyAppModule' only but the result is the same.
Can anyone help please?
Thanks

Check out http://www.oracle.com/technetwork/developer-tools/adf/learnmore/august2011-otn-harvest-457288.pdf Page 18 'Optimized Groovy data access to view objects'
Timo

How to import a table from another database using DB toolset.

Similar Messages

Maybe you are looking for