How to Import file into sap directory.

Hi all,
I need to import a .XML file into SAP-BW directory from my local pc.
By tcod AL11 I can only display all the directories, but I cannot import/upload this file.
How I Can create my own directory e.g /usr/sap/tmp123
Help me please.
thanks.
Kaustubh.

Hi Kaustubh,
Use the FM ARCHIVFILE_CLIENT_TO_SERVER.
Give Filename + path for both the source and destination and your file will get transferred to the specified directory in AL11.
But I am not sure about creating your own directory in AL11.
Reward if helpful.
Regards
Hemant Khemani

Similar Messages

  • How to import Photos into Active Directory

    Hi -
    IT Director asked me to import employees pictures into Active Directory so that we can use them in Outlook, SharePoint, Lync etc.
    Do you know how to import pictures into Active Directory?

    Thumbnailphoto Attribute in active directory is responsible for adding photos to Active directory.
    By Default Replication of this attribute will be disabled to Global catalog server. To make use of this facility we will have to enable replication of this attribute to Global Catalog. ( To accomplish this you will have to edit the schema using Active directory
    schema snap in).
    Refer Below link which explains about enabling the replication of Thumbnailphoto attribute to Global catalog.
    http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/configuring-using-display-picture-exchange-server-2010.html
    Requirements
    Minimum requirement for your exchange enviornment to use this - Exchange 2010.
    Exchange 2007 Don't support uploading photos AFAIK.
    Domain controller should be running with atleast windows server 2008 or later. And
    schema has to be windows server 2008
    Additionally for your information,
    How to remove the uploaded photos?
    Either You can edit the Thumbnailphoto attribute using ADSIedit and remove the entry which is assocaited with Thumbnailphoto attribute.
    Or,
    Try this.
    The Import-RecipientDataProperty and Export-RecipientDataProperty cmdlets allow you to import and export the photo blob to and from
    thumbnailPhoto attribute, but there's no Remove-RecipientDataProperty cmdlet to remove it. You can use the
    RemovePicture switch of Set-Mailbox cmdlet to remove a user's photo. For example:
    Set-Mailbox "Bharat Suneja" -RemovePicture
    Check out the below link which explains in and out of uploading photos,
    http://blogs.technet.com/b/exchange/archive/2010/06/01/gal-photos-frequently-asked-questions.aspx
    http://blogs.technet.com/b/ilvancri/archive/2009/11/17/upload-picture-in-outlook-2010-using-the-exchange-management-shell-exchange-2010.aspx
    To know about uploading photo using powershell ask this question in powershell forum
    http://social.technet.microsoft.com/Forums/en-US/winserverpowershell/threads
    Regards,
    _Prashant_
    MCSA|MCITP SA|Microsoft Exchange 2003 Blog - http://prashant1987.wordpress.com Disclaimer: This posting is provided AS-IS with no warranties/guarantees and confers no rights.

  • How to store file into a directory?

    i want to save the file(text file) into the directory which i have created using File object in the codes below. how do i do it?
    public void saveString(String filename, String string)
              //declare textfile to be null
              PrintWriter textFile = null;
              String line = null;
              try {
                   // writes to write.txt
                   textFile = new PrintWriter (new FileWriter(filename,true));
                   line = string;
                   // save string in textfile
                   textFile.println(line);
                   textFile.close();
                   // create a directory (to store (output).xml file)
              File fobj = new File("Testing");
              fobj.mkdir();
              catch (IOException e) {
                   System.out.println("Error in opening file");
                   System.exit(0);
         }

    create the directory first and then create the file u want liek this
    File f = new File (fobj,filename);
    and then open the fiel to write like this
    textFile = new PrintWriter (new FileWriter(f,true));
    regards
    rohan

  • How to Import DaRT into SAP CRM System

    Hi Everybody,
    Can some body help me in knowing how to import DaRT ( Data Retention Tool) into SAP CRM system. This is an urgent requirement. Your early reply will ab appreicated.
    Thanks in Advance
    Sirfraz

    Hi Kaustubh,
    Use the FM ARCHIVFILE_CLIENT_TO_SERVER.
    Give Filename + path for both the source and destination and your file will get transferred to the specified directory in AL11.
    But I am not sure about creating your own directory in AL11.
    Reward if helpful.
    Regards
    Hemant Khemani

  • How to Import file into primavera

    Hi Expert,
    I am very new to Primavera,My requirement is to import th efile into Promavera. It would be great help to me if some one send document to the below mail id or give some useful link..Please help me its very urgent.
    Mail ID : [email protected]
    Thanks in advance
    Regards
    Sathish
    Edited by: user13380775 on Jul 9, 2010 3:23 AM

    Hello
    1) Click on FILE and then IMPORT
    2) When the Import window opens choose the type of file you want to import. ex. XER or MS projects file. Then click next
    3) Select Import Type - usually Project, click next
    4) Select the file that you want to import by navigating to it, then click next
    5) Choose where to import it into your databse by selecting the appropriate place in "Import to". (You may also consider the "Import actions" if you want to have the import to create a new project or update a project) the click finish
    6) Primavera will start to import the project and in a few minutes it should be done.

  • Does anyone know how to import files into FCP X using focus enhancements FS-CV (DTE)?

    I've just purchase Final Cut X and the system does not recognise any (most) of the files on my FS-CV DTE hard drive. All files are quicktime.

    In FCP 7 I'd normally use the Log and Transfer function to convert the AVCHD files to ProRes. However with FCP X you can use the Import from Camera... command in the File menu or the button shortcut for the same function.
    This can be done by connecting the camera, or putting the memory card from the camera into a card reader, and then, from within the Imprt from Camera dialogue, selecting Open Archive and select the camera, card or in my case the backup I've made of the card.
    I regularly back up my AVCHD files to hard disk, or BluRay data disk, so I can reuse my SD cards but an important thing to remember when doing this is that you need to copy the whole directory structure of the memory card to a new folder on the hard drive. Simply selecting the .mts files won't work as the 'Import From Camera' function needs to see the whole directory structure to interpret the what files are there etc. I create a new folder and then copy all the folders and files on my card into that folder on my hard drive. When selecting Import from Camera/Open Archive I then choose the folder, not the files inside it. Once this is done the video files are presented and I can audition them and choose to import all of them or select the files I want.
    None of these methods require the files to be transcoded prior to import. You can choose the transcoding method during import so that either high quality ProRes files are created or Proxy files, smaller and lower quality for editing.

  • Bridge not importing files into After Effects

    From AE I go to File > Browse in Bridge...
    Bridge opens up and I find the file I want.  If I double click the file, an AI for instance, it opens the file within Illustrator.  I could find, double click it, and it opens in Photoshop.
    I feel as though I'm missing how to import files into After Effects by using bridge.
    I'm running CC 2014 on a Win 7 machine.

    Probably an issue with whatever created the files in the first place. WMV doesn't have Alpha, but can have multiple streams... anyway, AE is crap at dealing with such stuff, so convert it using an external tool like Handbrake or whatever...
    Mylenium

  • How to Import XML file into SAP B1

    Dear All,
    I have a scenario like,
    I am receiving a XML file from a 3rd party application for the daily Creation,Update of Item Master,BP Master, Marketing Documents. I want to import this file into SAP B1 through its approp objects. I understand DTW has limitation in its file types (Semicolo,Tab,Comma,ODBC). How do i do this ? Please guide me.
    Thanks,
    Thanga Raj K

    Hy folks,
    I´m frim Brasil and I've been studying the tool EFM (Eletronic File Manager) to learn more about it!
    There I saw that we can extract to XML "any" infomation from the database we want, mainly through the GEP.
    However, as I've seen, this Add-On can not import any XML file into SBO, unless for the BFP wich can be imported in conjunction with the BTHF Add-on.
    So I ask: how is it possible to import XML data into SBO database? Is it possible to be done through the EFM? or  it´s really necessary to write a code specifically to do that?
    Besides, I know that de B1iSN fit to this necessity... but when I tried to use it, by the custom "object" for BP, for example, there are some data wich the mapping conteined in this custom "process" that can not be imported... I tried to understand how to map those other fields not imported by the custom but this has been dificult to me as I am a implementation consultant focused in administrative process not on development...
    Could you please help me with this subject!
    Thanks a lot,
    Denis

  • How to call GOS(Generic Object service) attachment ( BMP file ) into SAP

    How to call GOS(Generic Object service) attachment ( BMP file ) into SAP script
    Example: MM02 Service object there attaching the bmp file the same file i need to call script based on the material number
    Please provide the procedure and  coding.
    Thanks in advance
    Raju

    Hi,
    The following link may be useful to u.
    help.sap.com/printdocu/.../BCSRVOBS.pdf

  • How to upload  and download a files into AL11 directory in ABAP

    Hi,
                   How to upload  and download a files into AL11 directory in ABAP
    thanks
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Mar 21, 2011 9:18 AM

    You should try one of these forums for an answer to your question:
    http://swforum.sun.com/jive/forum.jspa?forumID=116
    http://community.java.net/netbeans
    http://linux.java.net

  • How to upload a Flat file into sap database if the file is in Appl'n Server

    Hello Sap Experts , Can you tel me
    " How to upload a Flat file into sap database if the file is in Application Server.
    what is Path for that ?
    Plz Tel Me its Urgent
    Thanks for all

    Hi,
    ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
    *& Report  ZUPLOADTAB                                                  *
    *& Example of Uploading tab delimited file                             *
    REPORT  zuploadtab                    .
    PARAMETERS: p_infile  LIKE rlgrap-filename
                            OBLIGATORY DEFAULT  '/usr/sap/'..
    DATA: ld_file LIKE rlgrap-filename.
    *Internal tabe to store upload data
    TYPES: BEGIN OF t_record,
        name1 like pa0002-VORNA,
        name2 like pa0002-name2,
        age   type i,
        END OF t_record.
    DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
          wa_record TYPE t_record.
    *Text version of data table
    TYPES: begin of t_uploadtxt,
      name1(10) type c,
      name2(15) type c,
      age(5)  type c,
    end of t_uploadtxt.
    DATA: wa_uploadtxt TYPE t_uploadtxt.
    *String value to data in initially.
    DATA: wa_string(255) type c.
    constants: con_tab TYPE x VALUE '09'.
    *If you have Unicode check active in program attributes then you will
    *need to declare constants as follows:
    *class cl_abap_char_utilities definition load.
    *constants:
    *    con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
    *START-OF-SELECTION
    START-OF-SELECTION.
    ld_file = p_infile.
    OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
    ELSE.
      DO.
        CLEAR: wa_string, wa_uploadtxt.
        READ DATASET ld_file INTO wa_string.
        IF sy-subrc NE 0.
          EXIT.
        ELSE.
          SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                          wa_uploadtxt-name2
                                          wa_uploadtxt-age.
          MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
          APPEND wa_upload TO it_record.
        ENDIF.
      ENDDO.
      CLOSE DATASET ld_file.
    ENDIF.
    *END-OF-SELECTION
    END-OF-SELECTION.
    *!! Text data is now contained within the internal table IT_RECORD
    * Display report data for illustration purposes
      loop at it_record into wa_record.
        write:/     sy-vline,
               (10) wa_record-name1, sy-vline,
               (10) wa_record-name2, sy-vline,
               (10) wa_record-age, sy-vline.
      endloop.

  • How do I upload XML files into sap table?

    Dear all,
    I found some methods that upload xml into SAP,
    but there doesn’t work under 4.6c.
    Can someone tell me how to upload XML files into
    sap under 4.6c?
    THX!

    hi,
    You can convert XML to abap using transformations. Simple transformations is a proprietary SAP programming language that describes the transformation of ABAP data to XML (serialization) and from XML to ABAP data (deserialization).
    goto SE80->workbench->edit object(or other objects)->in object selection chose more tab and then choose the transformation radio button and write a name and click create new.
    Here you enter your transformation like
    <xsl:transform version="1.0"
      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
      xmlns:sap="http://www.sap.com/sapxsl"
    >
    <xsl:strip-space elements="*"/>
    <xsl:template match="/">
      <xsl:copy-of select="."/>
    </xsl:template>
    </xsl:transform>
    You can use this transfomation in your program using call transformation. You can find more info on call transformation in help.
    Hope this helps.
    Regards,
    Richa

  • How do I stop LR4 from organizing imported files into a folder by date.

    How do I stop LR4 from organizing imported files into a folder by date. Most times when I import files I have already created a folder and sub-folder structure tyat I want to use. I then right click the desired folder and choose import into this folder option. Why does LR4 insist on organizing my already selected destination into a sub-folder with a date by default?

    TimHillPhotography23 wrote:
    Most times when I import files I have already created a folder and sub-folder structure tyat I want to use.
    If you do it this way all the time consider a different approach:
    Manually copy your images from the card into your desired destination folder in the Finder/Explorer. Once complete drag&drop that entire folder into Lightroom. When the import dialog pops up select to Add the images to the catalog (not copy or move). You will end up with the exact folder structure reflected in your library.

  • How to import your MS Active Directory users in an Oracle table

    Hello,
    I first tried to get a Heterogenous Connection to my MS Active Directory to get information on my Active Directory users.
    This doesn't work so I used an alternative solution:
    How to import your MS Active Directory users in an Oracle table
    - a Visual Basic script for export from Active Directory
    - a table in my database
    - a SQL*Loader Control-file
    - a command-file to start the SQL*Loader
    Now I can schedule the vsb-script and the command-file to get my information in an Oracle table. This works fine for me.
    Just to share my scripts:
    I made a Visual Basic script to make an export from my Active Directory to a CSV-file.
    'Export_ActiveDir_users.vbs                              26-10-2006
    'Script to export info from MS Active Directory to a CSV-file
    '     Accountname, employeeid, Name, Function, Department etc.
    '       Richard de Boer - Wetterskip Fryslan, the Nethterlands
    '     samaccountname          Logon Name / Account     
    '     employeeid          Employee ID
    '     name               name     
    '     displayname          Display Name / Full Name     
    '     sn               Last Name     
    '     description          Description / Function
    '     department          Department / Organisation     
    '     physicaldeliveryofficename Office Location     Wetterskip Fryslan
    '     streetaddress          Street Address          Harlingerstraatweg 113
    '     l               City / Location          Leeuwarden
    '     mail               E-mail adress     
    '     wwwhomepage          Web Page Address
    '     distinguishedName     Full unique name with cn, ou's, dc's
    'Global variables
        Dim oContainer
        Dim OutPutFile
        Dim FileSystem
    'Initialize global variables
        Set FileSystem = WScript.CreateObject("Scripting.FileSystemObject")
        Set OutPutFile = FileSystem.CreateTextFile("ActiveDir_users.csv", True)
        Set oContainer=GetObject("LDAP://OU=WFgebruikers,DC=Wetterskip,DC=Fryslan,DC=Local")
    'Enumerate Container
        EnumerateUsers oContainer
    'Clean up
        OutPutFile.Close
        Set FileSystem = Nothing
        Set oContainer = Nothing
        WScript.Echo "Finished"
        WScript.Quit(0)
    Sub EnumerateUsers(oCont)
        Dim oUser
        For Each oUser In oCont
            Select Case LCase(oUser.Class)
                   Case "user"
                        If Not IsEmpty(oUser.distinguishedName) Then
                            OutPutFile.WriteLine _
                   oUser.samaccountname      & ";" & _
                   oUser.employeeid     & ";" & _
                   oUser.Get ("name")      & ";" & _
                   oUser.displayname      & ";" & _
                   oUser.sn           & ";" & _
                   oUser.description      & ";" & _
                   oUser.department      & ";" & _
                   oUser.physicaldeliveryofficename & ";" & _
                   oUser.streetaddress      & ";" & _
                   oUser.l           & ";" & _
                   oUser.mail           & ";" & _
                   oUser.wwwhomepage      & ";" & _
                   oUser.distinguishedName     & ";"
                        End If
                   Case "organizationalunit", "container"
                        EnumerateUsers oUser
            End Select
        Next
    End SubThis give's output like this:
    rdeboer;2988;Richard de Boer;Richard de Boer;de Boer;Database Administrator;Informatie- en Communicatie Technologie;;Harlingerstraatweg 113;Leeuwarden;[email protected];;CN=Richard de Boer,OU=Informatie- en Communicatie Technologie,OU=Afdelingen,OU=WFGebruikers,DC=wetterskip,DC=fryslan,DC=local;
    tbronkhorst;201;Tjitske Bronkhorst;Tjitske Bronkhorst;Bronkhorst;Configuratiebeheerder;Informatie- en Communicatie Technologie;;Harlingerstraatweg 113;Leeuwarden;[email protected];;CN=Tjitske Bronkhorst,OU=Informatie- en Communicatie Technologie,OU=Afdelingen,OU=WFGebruikers,DC=wetterskip,DC=fryslan,DC=local;I made a table in my Oracle database:
    CREATE TABLE     PG4WF.ACTD_USERS     
         samaccountname          VARCHAR2(64)
    ,     employeeid          VARCHAR2(16)
    ,     name               VARCHAR2(64)
    ,     displayname          VARCHAR2(64)
    ,     sn               VARCHAR2(64)
    ,     description          VARCHAR2(100)
    ,     department          VARCHAR2(64)
    ,     physicaldeliveryofficename     VARCHAR2(64)
    ,     streetaddress          VARCHAR2(128)
    ,     l               VARCHAR2(64)
    ,     mail               VARCHAR2(100)
    ,     wwwhomepage          VARCHAR2(128)
    ,     distinguishedName     VARCHAR2(256)
    )I made SQL*Loader Control-file:
    LOAD DATA
    INFILE           'ActiveDir_users.csv'
    BADFILE      'ActiveDir_users.bad'
    DISCARDFILE      'ActiveDir_users.dsc'
    TRUNCATE
    INTO TABLE PG4WF.ACTD_USERS
    FIELDS TERMINATED BY ';'
    (     samaccountname
    ,     employeeid
    ,     name
    ,     displayname
    ,     sn
    ,     description
    ,     department
    ,     physicaldeliveryofficename
    ,     streetaddress
    ,     l
    ,     mail
    ,     wwwhomepage
    ,     distinguishedName
    )I made a cmd-file to start SQL*Loader
    : Import the Active Directory users in Oracle by SQL*Loader
    D:\Oracle\ora92\bin\sqlldr userid=pg4wf/<password>@<database> control=sqlldr_ActiveDir_users.ctl log=sqlldr_ActiveDir_users.logI used this for a good list of active directory fields:
    http://www.kouti.com/tables/userattributes.htm
    Greetings,
    Richard de Boer

    I have a table with about 50,000 records in my Oracle database and there is a date column which shows the date that each record get inserted to the table, for example 04-Aug-13.
    Is there any way that I can find out what time each record has been inserted?
    For example: 04-Aug-13 4:20:00 PM. (For my existing records not future ones)
    First you need to clarify what you mean by 'the date that each record get inserted'.  A row is not permanent and visible to other sessions until it has been COMMITTED and that commit may happen seconds, minutes, hours or even days AFTER a user actually creates the row and puts a date in your 'date column'.
    Second - your date column, and ALL date columns, includes a time component. So just query your date column for the time.
    The only way that time value will be incorrect is if you did something silly like TRUNC(myDate) when you inserted the value. That would use a time component of 00:00:00 and destroy the actual time.

  • How to import swc into Adobe Flash CS3 ?

    I use following command to create a swc file,such as test.swc, there is a file named test.swf in myapp directory
    compc -include-sources myapp -output test.swc
    then I copy test.swc into Adobe Flash CS3\zh_cn\Configuration\Components directory, Then I restart Adobe Flash CS3,and create a file and press ctrl+f7, but I don't find test.swc!  Why? Where is wrong? How to import swc into Adobe Flash cs3?
    Thanks

    If you want to embed videos in your muse site, without using a service like youtube or vimeo, then you will need to manually upload the video files on the server and use them via the video tag available in html5, HTML5 Video
    To insert the video tags in your muse pages, you will need to use the 'Object -> Insert HTML' option.
    Since this option is not available in Muse, out of the box, I will recommend that you post this on our ideas section over here, https://forums.adobe.com/community/muse/ideas, and let our devs team know of this requirement.
    - Abhishek Maurya

Maybe you are looking for