How to import from Panasonic DMC-ZS10 to I Movie?

how to import from Panasonic DMC-ZS10 to I Movie?

You are probably not running the ancient original verion of OS 10.1 as shown! So what version are you running? What mac do you have? What version of iMovie do you have?

Similar Messages

  • Import from Panasonic DMC-FZ28 Lumix

    Trying to import from Panasonic DMC-FZ28 Lumix but the only import option is the
    in-built camera on my MPB (10.5.7).
    I can see the camera in the Finder window and can click on various photos.
    When the camera was connected to the USB port and select the setting as PC Connection.
    Is there something else I need to do in order for iMovie to see this camera ?
    Thank you,
    Jay

    If you are using iPhoto, import the photos into iPhoto. Then, in iMovie, start a new Project and name it (or open and old project). Open the Photo Browser in iMovie, and drag the photos in from there.
    If you are not using iPhoto, drag the jpegs from your camera to a folder in the Finder.
    Open iMovie. Start a new project and name it (or open and old project). Drag and drop the photos from the Finder window into your project.
    Message was edited by: AppleMan1958

  • Import from Panasonic DMC-LX3, only RAW files being imported not JPGs

    Hi,
    is there a workaround for the following Aperture import transfer behaviour:
    I have set my Panasonic DMC-LX3 to produce Raw (for CS4) and Jpg images with every shot.
    However, when I import the SD card, Aperture only imports the .RW2 files (which are of course not supported as the DMC-LX3 is not compatible).
    When I separate the RW2 files from the JPGs with two different folders on the SD card, then Aperture is able to transfer the JPGs.
    Any workaround?
    Thanks
    Christoph

    The JPEGs are there; they're just not used by default. To use them, use the "New version from master JPEG" menu item.

  • How do i import file formate imaged from panasonic DMC ZS40 into PSE 9.0

    how do i import file format  image from Panasonic DMC ZS40 into PSE 9.0. Any help appreciated.
    Thanks

    See:
    * http://kb.mozillazine.org/Import_bookmarks

  • Connecting Panasonic DMC ZS10 for video

    I can't connect my Panasonic DMC - ZS10 camera to I Movie to "import from camera".  All I get is my Mac built in camera as an option in the drop down box.  Any help/advice?

    Can't help with your in camera settings, but the NEW ITEM process will ensure that your editing sequence matches your video file
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn about the NEW ITEM process, including a picture to show you what to do

  • I asked how to export favorites from firefox to IE 8. i got how to import from IE8

    i want to know how to EXPORT favorites from firefox to IE 8.
    your instructions told me how to IMPORT from IE8 to firefox.
    now, please tell me how to EXPORT favorites FROM firefox

    In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
    * The first (gear) button is the Organize button with basic edit menu items for bookmarks
    * The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
    * The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
    Hover each button to see the tooltip or click each of them to see what they do.
    * https://support.mozilla.org/kb/how-do-i-use-bookmarks

  • How to Import from an external HD to LightRoom.

    I am brand new to Creative Cloud and to LightRoom. I have read and listened to importing from a memory card but am unsure as to how to import from the backup drive from my older Mac Pro to my new iMac. The external drive is already the backup for the new iMac, is plugged in and working. I can see the HDD in the LR panel and can find the "pictures" folder within the dropdown. I am not sure if the "pictures folder (on the lefthand panel) is the old b/u or the iMac HDD. I can get to where I need to be if I can figure out what I'm looking at and what I should look for as to the 2 HDD's, b/u and/or iMac. I am aware of the righthand panel but the interactions are totally unfamiliar to me. Thanks for any help and advice. TCrowe

    If you are importing from a hard drive then you don't need to worry about the right-hand panel in the import dialog. You would locate the folder that you want to import in the left-hand panel. At the top of the import screen you would choose the "Add" option. This will add those images to your catalog without having to move them anywhere. If you want to place copies on a different hard drive then you would choose the Copy option at the top of the import screen. Then the right-hand panel will enable you to specify where you want the copies to be placed.

  • After "upgrade" to new firefox, bookmarks didn't transfer. Help tells how to import from another browser but not old firefox. Also my anti virus (latest update) apparently not compatible with 4.0 Can I restore my old version

    Question
    After "upgrading" to new firefox none of my bookmarks are in new bookmarks help topics tell me how to import from another browser but not from previous version of firefox. Another problem is my anti virus ( most up to date) is apparently not compatible with 4.0 liked the old firefox would never have "upgraded" had I known my anti virus wouldn't work. Can I get old version back

    Check with Kaspersky as to what versions of Firefox their programs are compatible with. It is up to Kaspersky to keep their stuff up to date as Mozilla releases new versions of Firefox. And if they are unwilling or incapable of doing it, they should inform their customers of such and maybe refund their customers instead of stringing them along.
    http://forum.kaspersky.com/

  • Cant import using Log and Transfer to FCE 4.0.1 from Panasonic DMC-TZ10

    Does anyone know if/how I can import into FCE 4.0.1 using Log and Transfer? I use Log and Transfer with my Sony HDR XR200VE Video Camera but when I try this with the Panasonic DMC-TZ10 I can play the clips in the Log and Transfer Clip viewer however they don't import after I add them to the queue. It just gives me an ! icon and gives up.
    I guess I need to know if there is a combination of camera settings and Codecs I can choose that will allow me to successfully import into FCE 4.0.1 using Log and Transfer.
    The settings I can choose on the DMC-TZ10 camera are the Rec Mode (Either AVCHD Lite (GPS Rec), AVCHD Lite, or Motion JPEG) and the Rec Quality SH, H or L).
    iPhoto 09 and iMovie 09 will automatically import video from this camera if I choose Motion JPEG and H on the DMC-TZ10

    Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.

  • Importing to LR3.3 from Panasonic DMC-ZS3

    Sorry if this has been addressed. I couldn't find anything about it.
    Windows 7 Pro, 64bit, LR3.3, 2-SanDisk 2gb cards, RAW USB 2.0 UDMA reader
    Ever  since upgrading to LR3.3 I have not been able to Import files (jpg)  from my wifes SD cards straight to LR. Her camera is a Panasonic  DMC-ZS3. Prior to LR 3.3, ie; 3.0 it worked fine. I can copy via  explorer to the hard drive then Import them to LR 3.3 without a problem.  OK, there is a problem. I use LR's automatic folder destination creator  by date taken, on import. It takes too much time to create all these  folders using explorer.
    The Import report says the files  were not imported because they could not be read but reads them fine  from my hard drive. It reads and imports the files from my Nikon (CF  card) fine also.
    Any ideas why LR 3.3 does not like these files anymore.
    Jim

    Jim,
    Bad card readers and/or USB connections (cables, ports, hubs) are known to cause issues like yours. Somehow, LR seems to be more affected by these problems than the O/S tools.
    jga154 wrote:
    I can copy via  explorer to the hard drive then Import them to LR 3.3 without a problem.  OK, there is a problem. I use LR's automatic folder destination creator  by date taken, on import. It takes too much time to create all these  folders using explorer.
    You could copy the files into ONE temporary folder via Explorer, and still use Copy/Move and LR's automatic folder creation by date.
    Beat Gossweiler
    Switzerland

  • Trouble importing from Panasonic HDC-SD5

    When I connect my Panasonic HDC-SD5 AVCHD camcorder to my computer using a usb cable, a disk drive mounts, but no camera is seen by iMovie. The files on the disk drive cannot be imported either. Does anyone know how to import video from a Panasonic HDC-SD5 camera into iMovie?

    USA Consumer products for Panasonic camcorders (non-professional series) only have one camcorder type that use the IEEE/Ilink/DV/Firewire connection (pick your poision on what you want to call it Panny calls it DV).
    The models with the prefix PVDV/PVDC/PVGS are the models that use DVC tape and they will have a DV connection. Only the higher end of these model types will allow you to transfer video over a USB connection and those actually started in the PVGS line about 3 years ago.
    Outside of that, Panny makes camcorders that record to DVD, SD and SD/HDD media. All of these models (whether high-def or standard) use USB to connection for a personal computer and they are not treated as capture devices but more like removable drives. These camcorders are not compatible with a USB to DV conversion cable so do not waste your money.
    That is all I have for now. Please copy and repost this where it is needed.

  • How do import from iphoto backup disk

    My wife cleaned out her iPhoto library the wrong way. She deleted from the albums and said photos are still in the photo library. I made disk backups from Share/Burn for her current albums. I started a new library but can’t fine how to import them back with the same  albums she had them set up as. I can import as Event names only.
    Any Idea?

    You can do this from within iMovie.  In the content library at bottom left of the iMovie window there should be an iPhoto icon.  if you click on it you can select the pics you want.
    Geoff.

  • How to import from desktop (file) avchd in FCE4.0.1

    I copied from a camera onto my macbook avchd footage for later use in FCE4.
    I used the importcommand log and transfer.
    I have three maps; DCIM (empty), MISC (AUTPRINT.MRK) and PRIVATE with a lot of files.
    I tried all the maps (or files in it) to drag into L&transfer but that does not work.
    I am sure I am doing something wrong. How to import avchd footage in FCE?
    Thanks!
    Bruce.

    Read the section in the manual on log and transfer. Once again you can NOT drag and drop to the log and transfer window.
    If the application is crashing you have more serious problems.
    Do NOT go inside the folder structure of the SD card. Select the top level of the folder structure. If that crashes the application, you should take your computer to an Apple service technician.
    I'm assuming the the operating system was correctly installed, and the application was correctly installed from the disc in the Applications folder.

  • How to import from old address book?

    Hi all, I've searched the net about my problem but with no result.
    I have an old mac (a G3 iMac running 10.3.9) with a lot of contacts on its Address Book, and I do mean a lot. The computer is completely dead, but I have a copy of the contents of its internal hard disk on a new mac running Lion. My problem is importing the old contacts into the new Address Book. The file formats have changed and the old files can't be imported into the new application, they are not even recognized as addressbook files. Obviously I can't export from the old system since it's not running. The old AddressBook.data file is a terrible junk of names, addresses, telephone numbers and everything else organized in an incomprehensible way (I can't just manually copy the addresses from the file). Does anyone know how to import those contacts into the new format? Otherwise, I'll have to find somebody who owns an old system with an old Address Book application so that I can export the files from there. Thanks a lot

    As it's been 3 months, you probably have resolved this by now, but I had a similar problem today and resolved it with help from a tech at the Genius Bar at my local Apple Store.
    If you ever backed up your "Library" folder from your old Mac, it contains the "Application Support" folder which in turn contains the "Address Book" folder.
    On your new iMac, running Lion:
    1)open Finder
    2)select "Go" on the menu
    3)with the "Go" window open, press and hold down the "Option" key on your keybord. Doing this will expose the hidden "Library" folder.
    4) in the Library folder you will find "Application Support"
    5) in the "Application Support" folder, you will find the "Address Book" folder
    6) assuming you have the old "Address Book" folder from within the backed-up "Library Folder" from you old iMac, delete the "Address Book" folder on your new iMac and copy your old backed-up Address Book folder to the "Application Support" folder in its place.
    7) Open the Address Book application and you should see your contact records. 
    I just finished doing this and it worked for me.
    Cheers

  • Clips won't import from Panasonic Camera

    Hello,
    I'm new to imovie. Actually, I'm in the process of trying to create my first project on it and am having some trouble. I'm hoping someone out there can answer my questions about it. First, when I plug my camera into the computer and open imovie and a new project is selected the clips on my camera will not import onto the computer. The only thing that appears are the still images from iphoto that were previously on the computer. There are absolutely no clips on the computer even though when I play back on the camera with the battery in it, and when it is not connected to the computer, there is over one hour's worth of clips on the tape. Why do you think this might be happening and what can I do to make the clips import onto imovie?
    Now, just so you know. The camera that I'm using is a Panasonic PV-GS83 and the cable I'm using to connect to the computer is a DV cable that I had to purchase, which should have been included with the camera, but was not.(The DV cable seems to fit into the computer fine.) Also, In order to plug the DV cable into the camera and the camera into the computer I have to remove the camera's battery. In addition, according to the camera's instructions, the camera has to be in Tape Playback mode and not in PC mode in order for it to import video images onto imovie. Moreover, images for the camera can only be recorded on a tape or a card, but supposedly the card can only import still and not video images. I've also mainly recorded video images onto the tape in the camera. Finally, the version of imovie that I'm trying to use is imovie '05, the computer is a Powerbook G4 and the operating system is MAC OSX (10.4)
    If someone out there could answer my questions soon I would really appreciate it.
    All the best,
    csoste

    welcome csoste to the  boards..
    ehm, what is your question....... ?
    (and: if iM5 is in use, why posting in the iM≤4 section of this board... ?)
    anyhow, usual workflow to import from miniDV:
    connect camcorder to powerline..
    connect 4/6pin firewire cable to Mac
    set camera to play
    set iM to 'Import from camera' (manual for iM5 here: http://www.apple.com/support/imovie/tutorial/index.html )
    ...

Maybe you are looking for