How to import the transports from the SAP Integration Kit into SAP system

Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank you

Hi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri

Similar Messages

  • How to import a website from the internet

    How can I import a website from the internet to copy to
    use?

    See answer to your other post.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "scan reg" <[email protected]> wrote in
    message
    news:f5tr8b$anm$[email protected]..
    >
    quote:
    Originally posted by:
    Newsgroup User
    >
    > define a new site in dw.
    > set the local folder to a new empty folder
    > fill in the remote server info with your ftp info.
    >
    > connect and Get all the files.
    >
    > What if it's a dynamically generated site?
    >
    > Can DW grab all the rendered pages instead?
    >
    > I'm trying to convert from Joomla to DW
    >
    > Thanks
    >
    >
    >

  • OMBPLUS - How to import a table from the database

    I have a table that is out of sync with its database definition. In OWB, I would go to the Tables section and select Import and re-import the file in. How do I script this in OMBPLUS.

    If I do the OMBRETRIVE TABLE 'CUSTOMER' GET COLUMNS then all I get is a list of columns displayed in OMBPLUS. Doing a OMBCOMMIT does not modify the table in the OWB repository. It still does not have the new columns.
    Also, when I import a table from the GUI, I UNCHECK the two advanced options of: 'Preserve repository added constraints' and 'Preserve repository added columns'. I also get to select from the GUI I get to choose how many levels of foreign key constraints to retreive. How do I specify these in the OMBPLUS script as well.

  • How to import a transport from an urgent correction into QAS again ?

    Hi guys,
    we're new in charm.
    We have an urgent correction document, with 1 transport.
    We've put the urgent correction in status "to be tested" so now the linked transport is imported into QAS system. But this was a little bit too soon :-s
    I had to do some manual work on QAS before importing that transport.
    Can I easily (or how can I do this at all) import that same transport again into QAS ?
    kind regards,
    David De Boel

    Hi Guys,
    We have implemented change request and upgraded for SP 15 support pack
    when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
    System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
    You cannot import any requests for project BD2_P00001 at the moment
    Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
    But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
    kindly give ur inputs as it is very urgent.
    Regards
    Raju

  • UOM issue of SR that push from third party integrated software into SAP

    Dear SAP Expert/Guru,
    Would like to seek for your advise what is to be done to check the issue of different UOM created in SR when push from thrid party intrgration software into SAP.
    The material only being maintained 1 UOM which is PKT however, when the data being push from the integration software it created the material with the UOM CTN and this cause the whole SR cannot be used.
    Is there any way to check between the data integration? The client is using BAPI to push the data.
    Currently the client just implement PI module and the third party software is integrated with PI module.
    Kindly advise is there any other way to check.
    Thank you
    Regards
    Leonard Tan

    Dear Shailesh & Jurgen,
    Due to the T-code CUNI is maintained as Fire Fighter in the production server, so I only can use the QA server to analyst the UOM maintained in the server.
    Below is the result of the analysis:-
    <u>ISO Code</u>   <u>ISO code text</u>
    CT             CTN
    PK             Pack (assuming this is used as packet)
    As in the Change Units of Measurement of Dimension: Overview. THe result as shown:-
    <u>Unit</u>   <u>Commercial</u>   <u>Technical</u>   <u>Meas.unit text</u>
    CTN             KAR             CTN             Carton(SC)
    PKT             PKT             Pkt             Packet(s)
    When double click the "Units of Measurement, select any unit and click on the lens, here you will see a small box called ALE/EDI, you will get to see the ISO Code in the box and a small checkbox called primary code"
    There is no checking being clicked at the primary code and nothing is being keyed in the ISO code
    Kindly advise what is to be done? is it the ISO issue or is there any setting being done wrongly.
    Thank you
    Regards
    Leonard Tan

  • SAP Integration KIT FOR SAP BO Edge 3.1 Trial

    Hi,
    The SAP Integration Kit 3.1 for BO Enterprise 3.1 is the same for BO Edge 3.1 Trial or there is a specific for BO Edge?
    Because I did the download of BO Edge Trial in the SAP BO area, and install the SAP Integration KIT but the system doesn´t work.
    thanks,
    Rodrigo

    i think that there is a specific Integration Kit for Edge
    good luck
    Amr

  • How to import a transport from one SAP system to another SAP System?

    We have a requirement where the same security report needs to be made avialble across the whole SAP landscape - comprising of ECC6, PI7, BW, HR , SRM, CRM etc.
    To reduce the time and effort, is it possible to create the report in ECC6 attach it to a transport request and import it into SRM, CRM etc?
    If so, what is the procedure?
    Thanks,
    Bhaskar

    Hi
    Yes it is possible. Attach the report to the request and release the request. It will create cofile and datafile for the request in folder /usr/sap/trans/data and /usr/sap/trans/cofiles.
    Copy these two files and paste them into the target system in the respective folders i.e the above mentioned directory structure.
    The data file should look like Rxxxxxx.SID and cofile should look like Kxxxxxx.SID where xxxxxx is your request number.
    Once these are copied in the target system, logon to target system goto STMS, goto the import queue of the system, then extras --> Other requests --> Add, enter the request number as in original system <SID>Kxxxxxx, and enter.
    Then you should be able to import it.
    Hope this clarifies.
    Regards
    Rahul

  • How to import Raw files from the Canon 5D Mark III into PSE12? [was: cr2]

    I have Photoshop Elements 12 and I can't import Canon 5D Mark III CR2 files.

    Not sure what you mean by view the photos?  Are they showing in the camera raw dialog when you choose a CR2 file from the menu in expert mode:
    File >> Open
    What computer and operating system are you using?
    Can you try shooting a couple of new CR2 files and then put them into a folder on your hard drive rather than the external drive. Can you import from that location using the Organizer menu:
    File >> Get photos & Videos >> From Files & Folders

  • Licence (Integration Kit for SAP )

    Hello,
    I have downloaded the "BusinessObjects XI 3.0 Integration Kit for SAP" from the link https://boc.sdn.sap.com/node/18962 .   I use it with Crystal Report 2008 and it works fine.   Now, I want to buy the licence but someone told me I can't,  I need to buy BO Edge Series or BO Enterprise and I will get Integration Kit for free.
    Could you tell me if I can buy only One Licence of "BusinessObjects XI 3.0 Integration Kit for SAP" and use it with Crystal Report 2008?   If so, could you tell me where and the cost to get it.
    Thanks
    Cris

    Hi,
    you can only receive it in combination with BusinessObjects Edge or BusinessObjects Enterprise
    ingo

  • BusinessObjects XI 3.1 Integration Kit for SAP Solutions install

    Where can I download the BusinessObjects XI 3.1 Integration Kit for SAP Solutions client install?  I have only been able to find a trail version of 3.0 searching the site.
    Thanks

    all the software is on service marketplace. take a look here:
    Getting started
    https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/20f83c7e-3f2a-2c10-7dbf-a5ec14611a1e [original link is broken]
    Software / Installation
    https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/a02d2792-452a-2c10-7c8f-ddd50dad779b [original link is broken]
    Content Library
    https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/70041b55-b52a-2c10-87a3-e4fa3c3acdaa [original link is broken]
    Ingo

  • How to pass the values from the Wb Dynpro Application to the SAP Backend ?

    Hi All,
    Good morning..,
    I have scenario like:
    I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
    Upto know I imported the corresponding RFC and maaped to the View.
    How to proceed with the coding to save the data...
    PLease suggest...
    Regards and Thanks in Advance,
    CSP

    Hi  Pradeep
    Steps:
    1. First create an instance for bapi and bind the instance to the bapi node.
      Z<bapi name> zb=new Z<bapi name>();
      wdContext.nodeZ<bapi name>. bind(zb);
    2. Then if u have the import parameter u have to set them by using
        The instance of the above bapi.
        Zb.set<import parameters>;
    3. If the bapi has a table parameters then the structure for the table parameters will also be imported
       In the model class.
    4. Set the table parameters by creating the instance for that structure and using this instance set it.
       Z<Struct>itm tab=new Z<Struct>();
       Tab.set<table parameters>
    5. Then add the structure instance to the bapi instance.
        Zb.add(Tab);
    6. Then Execute the bapi after setting the import parameters.
    7.  If there is any export parameters, then get the values after execution.
    Look at this thread for codes
    Re: RFC call on click of button
    Regards,
    Arun

  • How can we remove the commas from the Formula value in SAP BW BEx query

    Hi All,
    How can we remove the commas from the Formula value in SAP BW BEx query
    We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
    Regards
    Venkat.

    Do you want to remove the commas when you run the query on Bex Web or in RSRT?
    Regards

  • How to open Crystal Report from the SAP GUI ?

    Hi experts,
        We have developed some reports for our ECC 6.0 system by using Crystal Report 2008 and SAP integration kit , these reports are published to BO edge 3.1 server.  To view the report, our user have to open IE and login Infoview first.
       For convenience, we want to open Crystal report from SAPGUI directly without login BOE, How can we do it? 
    Thanks.

    Hi
    please take a look here
    Crystal Reports
    Regards,
    STratos

  • How can I remove the credits from the apple ID and import it to another apple ID?

    How can I remove the credits from the apple ID and import it to another apple ID?
    I want to remove the credit I have from my apple ID to another apple ID.
    Is there a way?

    No, sorry. You cannot transfer an iTunes credit to another Apple ID.
    Cheers,
    GB

  • For some reason is all my music gone from iTunes, but I do still have the songs on my iPod Touch... So my problem is that I don't know how to import my files from iPod Touch back to iTunes.

    Hey all
    I should export my music to another program, because I do also have this MP4, which needs some files. Well, I did that and it seems like Windows Media Player couldn't open the files, but then I go back to iTunes and I see all my files are gone. Nothing is left, and now I can't syncronize files to my iPod Touch without deleting all the existing files. So now the only thing I want to know, if it's possible, is how to import music (not from Apple Store) from my iPod Touch to iTunes?

    You can use one of the third-party programs discussed here to transfer non-iTunes purchased music to a computer.
    new PC: Apple Support Communities

Maybe you are looking for