How to Import WMV's into Final Cut Express WithOUT Flip4Mac

How can I import a .wmv into Final Cut Express v.1.0 without using Flip4Mac? I am doing a video for a friend who gave me a .wmv file and it throws up a "Flip4Mac Free Trial" watermark. So lame. Is there a free version of something I can use? I googled but couldn't find. Any suggestions? Thanks SO much in advance.

There aren't any free import/export components for WMV content. F4M is the best, since it's integrated into FC, but, as you've found out, without paying the $49., the free version limits the clip to 1/2 it's duration up to 30 seconds, and puts the watermark on.
The other software that converts is Visual Hub, but it doesn't have the FC integration...it's slightly cheaper.
There's one other option HERE, that I have not tried. Supposedly they will convert video to other formats for you.

Similar Messages

How to import VLC downloads into final cut?

my new final cut express does not accept VLC trailers which i downloaded ,
can i transform VLC into Quicktime?

i checked again
those downloads i made with VLC
actually are WMV (they only look like VLC
so th question is :
how cani import those WMVs into final cut express?
thx for responding

Importing video files into final cut express

I am a pro tools engineer and have just dove into final cut express 4.0 to do some simple video editing.I have a cannon camera with a sd card.I archived the video to a hard drive so I could free up the card.I can not find a single piece of evidence that explains how I can import those files from my hard drive.Everything that is mentioned is comming from a camera.I also tried by the book importing a Imovie to start simple.No luck.It shows up in the directory but there is no video.Needless to say I am lost!!!!

If you still have the original video on the memory card, put it back in the camcorder. (Don't try to copy it back from your Mac to the card, however.) Connect the camcorder to your Mac via USB and try capturing the video via FCE's Log & Transfer function.
In most cases when people merely copy video files from a camcorder's memory stick or hard drive (usually AVCHD video) to the Mac desktop or a folder, they don't copy the full directory structure on the card, which is essential. Is that what you did when you 'archived' the video? Can you provide more specific info?

Importing LiveType project into Final Cut Express HD 3.5

I lost on how to import the livetype project into fce HD 3.5. When I do import it, i get ready to superimpose it over a scene in my movie, and a note comes up and says (insuffciant......something) what am i doing wrong?

I'm assuming you are able to import the LT project into the FCE project and can see it listed in your FCE browser.
Trying simply dragging the file directly from the browser to an empty video track (should be a top/upper level track..not track 1)in the sequence's timeline and place at the point/time/place you want it to appear in the sequence.
You don't have to use the Canvas insert or overlay commands to get the LT project into the timeline.

Importing WMV files to final cut express

Starting out on FC ex and have been given a memory stick with footage to edit. It's stored as a WMV file and so I can't import it. Anybody got any ideas????

Is that a typo error ?
Could be.
Here's quote from Streamclip UG:
MPEG Streamclip is a converter, an exporter, a player, an editor, a downloader.
It can open many file formats: muxed files MPEG, MPG, VOB, PS, M2P, MOD, VRO, DAT, DCM, VDR, PVR; transport streams TS, M2T, MTS, MMV, REC, VID, AUD, AVR, TP, TP0, TRP, TOD; demuxed files M2V, M1V, MPV, AIFF, AIF, M1A, MP2, MPA, AC3; QuickTime-compatible files MOV, DV, AVI, MP4, DIVX, WMV, FLV; pictures TIFF, JPEG.
MPEG Streamclip supports MPEG-1 video, MPEG layer 1/2 audio, AC3/A52 audio and PCM audio. MPEG-2 video is supported in conversions, but for playback and export you have to buy the MPEG-2 Playback Component ($19.99) from Apple.
To open DivX files, you have to install one of the free DivX-compatible codecs (DivX 5 or 6, 3ivx, XviD).
To open WMV files, you can install the free Flip4Mac WMV Player from http://www.flip4mac.com/ . Export to WMV is supported if you buy Flip4Mac WMV Studio.
To open FLV files you have to install Perian, a free codec pack, from http://www.perian.org/. But note that currently, Perian does not "obsolete" or replace other codecs so you still have to install 3ivx, DivX, XviD when required.

How do you import mpeg2 files into final cut express?

I have recently show my sons christening, and relied on a friend to do ths shooting. One of the tapes unfortunatley has broken, and I have had a second party transfer this footage onto DVD for me. He is also sending the footage through as an MPEG 2 file. Is there anything I can do with this using FCPE?

Convert the DVD's VOB files into a format that works natively in FCE. For DVD footage (which is SD), use MPEG Streamclip to do the converting. Here's a tutorial on using MPEG Streamclip: http://www.secondchairvideo.com/?p=739
MPEG Streamclip is freeware, but you may need to purchase the QuickTime MPEG-2 Playback Component from Apple if you don't have it already.
-DH

Importing liveType project into Final Cut Express HD

Hi
When i try to import my Livetype project into FCE an file error pops up with the message "File error: 0 files, 0 acces denied, 1 unknown" In this directory there is only one file with the projectname en de extension ipr.
Those anyone know what the problem is ?
Thanks in advance
Tonnie

I encountered the same problem. When I first installed this program I did not install all of it. I went back and installed live type and soundtrack after he fact. Then I started receiving the same error message.
I reinstalled the entire program at one time and now I do not receive that error message. I hope that helps.

How to Import AVCHD Files in Final Cut Express 4

Hello,
I try to import (log) my AVCHD files from a Panasonic HD Cam. The camcorder setting is 1920x1080 25i (HG). The logging-preview is fine but no matter which preferences I use in FCE 4, the clips are not synchronized. Video is a little bit fasterthan audio. How can I synchronize that?
Regards, Huwu

Tom Wolsky wrote:
Shoot and edit in standard video formats and use Graeme Nattress' Film Look plugin.
This? http://www.nattress.com/Products/filmeffects/filmeffects.htm
So my best bet is to shoot in 1440x1080 (12Mbps) and a frame rate of either 60i or PF30 when using FCE4?
What is the difference between 60i and PF30 frame rates?
I am using a Canon HF10.

Importing LiveType porject into Final Cut Express 3.5.1.

Hi
When i try to import my Livetype project into FCE an file error pops up with the message "File error: 0 files, 0 acces denied, 1 unknown" In this directory there is only one file with the projectname en de extension ipr.
Those anyone know what the problem is ?
Thanks in advance
Tonnie
Mac OS X (10.4.9)
Mac OS X (10.4.9)

What format is the hard drive where the live type file is located, ms-dos?
If so, the drive should be reformatted to Mac OS Extended.
You will lose all material on the drive when it is reformatted.
x

Can I import MTS files into Final Cut Express?

It seems like FCE only reads MOV and MP4 files, and sometimes it doesn't even read those for me. Is there no easy way to import and edit MTS video files?

If the source files are HD, then use Clipwrap:
http://www.divergentmedia.com/clipwrap
and convert the source files to Apple Intermediate Codec.
MtD

Importing Files into Final Cut Express

I have a technical issue that I hope someone can assist me with...
I recieved 2 harddrives full of video clips that were shot in HD from a video production house. Here is the content on the drives: CARD 1 (folder), inside this folder there are 2 items (CONTENTS & LASTCLIP.txt) in the CONTENT folder are the following folders : AUDIO, CLIP, ICON, PROXY, VIDEO, and VOICE.
My question/dilemma: Can I import these clips into Final Cut Express to edit? I have an older version of Final Cut HD that won't work with these files.
Any and all input will be greatly appreciated.
-Greg

HELP ! Anybody, please help !
As you can probably guess. I've reached the limit of my "expertise" with your files ....... ".XML" sounds familiar but you will have to hang around for someone else to tell you whether and how they can be used.
One thing I am sure about (I think!) is that the latest version of FCE will be no better than the older one you have.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to Encoding MPEG Movie to be able to import into Final Cut Express

I have MPEG Movie video clips that were sent to me. Title dvdMovie1chapter26.mpg (21.6MB) given to me from a PC taken on dvd video camera and compiled on CD disk. I would like to edit in Final Cut Express 4.0. I can not import in present form. Have used HandBrake and Toast 8 to encode. Divx and AVI to grainy. Have tried to make QuickTime Movie but 21.6 MB file went to 115.6 GB. Not sure how to set QuickTime options (Formats-Audio-Video Setting) in Toast 8 to encode with good quality this file so I can import into Final Cut Express. I will not have enough disk space to do all the video clips at 110 GBs or more per file. When I drag this file into Toast 8 with DVD-Video selected the file come into Toast as a Video-MPEG-2 720x480 29.97fps and Audio- Dolby Digital, Stereo 48000Hz File. Any Ideas?

How long is the movie? DV is 3.6MB/second. Handbrake is no good for this. I don't know if Toast will do it, but you can try MPEG Streamclip. You want to export to QuickTime using the DV NTSC codec at frame size of 720x480 and 29.97fps.

How do i import imovie project into final cut pro

I movie 08 is seriously lacking titles and transitions, so I want to spruce up my project in final cut pro, but I do not know how to get the project into final cut pro
thanks for your help

YES!
Apple seems to be talking down to users with much of the workflow and nomenclature in the iLife Apps - it's almost insulting.
But I'm as old as the hills too - grumping has become one of my favorite pass times.
And while I'm at it:
I still can't figure out why there is a "GO" item in the menu of OSX. WTH is THAT ? And why can't users change it's contents? Very PC. It would be more tolerable if we could use it like the OLD Apple Menu back in OS9. The Dock is cute GUI eye candy but I'd like the option of "docking" items in a menu too.
I'll shut up now before I get in trouble...
g

How to import MXF files to Final Cut Pro with smooth editing

Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
you may be familiar with Material eXchange Format (MXF). Though MXF is a
great video format to record high-definition videos, it is not easy to
use in that they are not natively supported by most NLE systems like
Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
Along with some help from a top MXF Converter, it can be done. To
help those who wanna edit MXF files in FCP without problems, here I
share with you a simple guide on how to convert MXF files to edit in
Final Cut Pro 6/7 or FCP X.
First of all, downloading the App- Brorsoft MXF Converter for Mac
Overall, the program is a professional yet easy-to-use MXF Converter
on Mac (Mavericks included) which can not only convert XF100, Canon
C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
simple video editing functions for you. The MXF to FCP Converter not
only can convert MXF to ProRes for FCP, but also can transcode MXF
videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
Just download it and follow the tutorial below to get the work done.
Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
1. Import MXF files to the converter
Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
2. Select FCP editable format
Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
Tips:
a. Settings- click to set video
resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
20Mbps), frame rate (24p/30p)
b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
3. Start transcoding MXF video to FCP
Click “Convert” button to start converting MXF files to Apple ProRes
MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
is done, you can transfer MXF footage into Final Cut Pro (X) for editing
smoothly on Mac with ease.
Source:How to import MXF files to Final Cut Pro with smooth editing
[quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

How to Import WMV's into Final Cut Express WithOUT Flip4Mac

Similar Messages

Maybe you are looking for