How to improve Query Performance

Hi Friends...
I Want to improve query performance.I need following things.
1.What is the process to findout the performance?. Any transaction code's and how to use?.
2.How can I know whether the query is running good or bad ,ie. in performance praspect.
3.I want to see the values i.e. how much time it is taking to run?. and where the defect is?.
4.How to improve the query performance?. After I did the needfull things to improve performance, I want to see the query execution time. i.e. it is running fast or not?.
Eg..
Eg 1. Need to create aggregates.
Solution: where can I create aggregates?. Now I'm in production system. So where I need to create? .i.e. indevelopment or in Quality or in Production system?.
Any chenges I need to do in Development?.Because I'm in Production system.
So please tell me solution for my questions.
Thanks
Ganga
Message was edited by: Ganga N

hi ganga
please refer oss note :557870 : Frequently asked questions on query performance
also refer to
Prakash's weblog
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695
This is the oss notes of FAQ on query performance
1. What kind of tools are available to monitor the overall Query Performance?
1.     BW Statistics
2.     BW Workload Analysis in ST03N (Use Export Mode!)
3.     Content of Table RSDDSTAT
2. Do I have to do something to enable such tools?
Yes, you need to turn on the BW Statistics:
RSA1, choose Tools -> BW statistics for InfoCubes
(Choose OLAP and WHM for your relevant Cubes)
3. What kind of tools is available to analyze a specific query in    detail?
1.     Transaction RSRT
2.     Transaction RSRTRACE
4. Do I have an overall query performance problem?
i. Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high   number in all Info Cubes.
ii. You need to run ST03N in expert mode to get these values
5. What can I do if the database proportion is high for all queries?
Check:
1.     If the database statistic strategy is set up properly for your DB platform (above all for the BW specific tables)
2.     If database parameter set up accords with SAP Notes and SAP Services   (EarlyWatch)
3.     If Buffers, I/O, CPU, memory on the database server are exhausted?
4.     If Cube compression is used regularly
5.     If Database partitioning is used (not available on all DB platforms)
6. What can I do if the OLAP proportion is high for all queries?
Check:
1.     If the CPUs on the application server are exhausted
2.     If the SAP R/3 memory set up is done properly (use TX ST02 to find bottlenecks)
3.     If the read mode of the queries is unfavourable (RSRREPDIR, RSDDSTAT, Customizing default)
7. What can I do if the client proportion is high for all queries?
Check whether most of your clients are connected via a WAN connection and the amount of data which is transferred   is rather high.
8. Where can I get specific runtime information for one query?
1.     Again you can use ST03N -> BW System Load
2.     Depending on the time frame you select, you get historical data or current data.
3.     To get to a specific query you need to drill down using the InfoCube name
4.      Use Aggregation Query to get more runtime information about a   single query. Use tab All data to get to the details.   (DB, OLAP, and Frontend time, plus Select/ Transferred records, plus number of cells and formats)
9. What kind of query performance problems can I recognize using ST03N
   values for a specific query?
(Use Details to get the runtime segments)
1.     High Database Runtime
2.     High OLAP Runtime
3.     High Frontend Runtime
10. What can I do if a query has a high database runtime?
1.     Check if an aggregate is suitable (use All data to get values "selected records to transferred records", a high number here would be an indicator for query performance improvement using an aggregate)
2.     o Check if database statistics are update to data for the   Cube/Aggregate, use TX RSRV output (use database check for statistics and indexes)
3.     Check if the read mode of the query is unfavourable - Recommended (H)
11. What can I do if a query has a high OLAP runtime?
1.     Check if a high number of Cells transferred to the OLAP (use "All data" to get value "No. of Cells")
2.     Use RSRT technical Information to check if any extra OLAP-processing is necessary (Stock Query, Exception Aggregation, Calc. before   Aggregation, Virtual Char. Key Figures, Attributes in Calculated   Key Figs, Time-dependent Currency Translation) together with a high number of records transferred.
3.     Check if a user exit Usage is involved in the OLAP runtime?
4.     Check if large hierarchies are used and the entry hierarchy level is as deep as possible. This limits the levels of the hierarchy that must be processed. Use SE16 on the inclusion tables and use the List of Value feature on the column successor and predecessor to see which entry level of the hierarchy is used.
5.     Check if a proper index on the inclusion table exist
12. What can I do if a query has a high frontend runtime?
1.     Check if a very high number of cells and formatting are transferred   to the Frontend (use "All data" to get value "No. of Cells") which   cause high network and frontend (processing) runtime.
2.     Check if frontend PC are within the recommendation (RAM, CPU MHz)
3.     Check if the bandwidth for WAN connection is sufficient
REWARDING POINTS IS THE WAY OF SAYING THANKS IN SDN
CHEERS
RAVI

Similar Messages

How to improve query performance using infoset

I create one infoset that including 4 char.and 3 DSO which all are time-dependent.When query run, system show very poor perfomance, sometimes no data show in BEX anayzer. In this case I have to close BEX analyzer at first and then open it again, after that it show real results. It seems very strange. Does anybody has experience on infoset performance improvement. pls info, thanks!

Hi
As info set itself doesn't have any data so it improves Performance
also go through the below tips.
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
Statistical Records Part 4: How to read ST03N datasets from DB in NW2004
How to read ST03N datasets from DB
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

How to improve Query performance on large table in MS SQL Server 2008 R2

I have a table with 20 million records. What is the best option to improve query performance on this table. Is partitioning the table into filegroups is a best option or splitting the table into multiple smaller tables?

Hi bala197164,
First, I want to inform that both to partition the table into filegroups and split the table into multiple smaller tables can improve the table query performance, and they are fit for different situation. For example, our table have one hundred columns and
some columns are not related to this table object directly (for example, there is a table named userinfo to store user information, it has columns address_street, address_zip,address_ province columns, at this time, we can create a new table named as Address,
and add a foreign key in userinfo table references Address table), under this situation, by splitting a large table into smaller, individual tables, queries that access only a fraction of the data can run faster because there is less data to scan. Another
situation is our table records can be grouped easily, for example, there is a column named year to store information about product release date, at this time, we can partition the table into filegroups to improve the query performance. Usually, we perform
both of methods together. Additionally, we can add index to table to improve the query performance. For more detail information, please refer to the following document:
Partitioning:
http://msdn.microsoft.com/en-us/library/ms178148.aspx
CREATE INDEX (Transact-SQL):
http://msdn.microsoft.com/en-us/library/ms188783.aspx
TechNet
Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Allen Li
TechNet Community Support

How to improve query performance when reporting on ods object?

Hi,
Can anybody give me the answer, how to improve my query performance when reporting on ODS object?
Thanks in advance,
Ravi Alakuntla.

Hi Ravi,
Check these links which may cater your requirement,
Re: performance issues of ODS
Which criteria to follow to pick InfoObj. as secondary index of ODS?
PDF on BW performance tuning,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
Regards,
Mani.

How to improve query performance built on a ODS

Hi,
I've built a report on FI_GL ODS (BW3.5). The report execution time takes almost 1hr.
Is there any method to improve or optimize th query performance that build on ODS.
The ODS got huge volume of data ~ 300 Million records for 2 years.
Thanx in advance,
Guru.

Hi Raj,
Here are some few tips which helps you in improving ur query performance
Checklist for Query Performance
1. If exclusions exist, make sure they exist in the global filter area. Try to remove exclusions by subtracting out inclusions.
2. Use Constant Selection to ignore filters in order to move more filters to the global filter area. (Use ABAPer to test and validate that this ensures better code)
3. Within structures, make sure the filter order exists with the highest level filter first.
4. Check code for all exit variables used in a report.
5. Move Time restrictions to a global filter whenever possible.
6. Within structures, use user exit variables to calculate things like QTD, YTD. This should generate better code than using overlapping restrictions to achieve the same thing. (Use ABAPer to test and validate that this ensures better code).
7. When queries are written on multiproviders, restrict to InfoProvider in global filter whenever possible. MultiProvider (MultiCube) queries require additional database table joins to read data compared to those queries against standard InfoCubes (InfoProviders), and you should therefore hardcode the infoprovider in the global filter whenever possible to eliminate this problem.
8. Move all global calculated and restricted key figures to local as to analyze any filters that can be removed and moved to the global definition in a query. Then you can change the calculated key figure and go back to utilizing the global calculated key figure if desired
9. If Alternative UOM solution is used, turn off query cache.
10. Set read mode of query based on static or dynamic. Reading data during navigation minimizes the impact on the R/3 database and application server resources because only data that the user requires will be retrieved. For queries involving large hierarchies with many nodes, it would be wise to select Read data during navigation and when expanding the hierarchy option to avoid reading data for the hierarchy nodes that are not expanded. Reserve the Read all data mode for special queriesu2014for instance, when a majority of the users need a given query to slice and dice against all dimensions, or when the data is needed for data mining. This mode places heavy demand on database and memory resources and might impact other SAP BW processes and tasks.
11. Turn off formatting and results rows to minimize Frontend time whenever possible.
12. Check for nested hierarchies. Always a bad idea.
13. If "Display as hierarchy" is being used, look for other options to remove it to increase performance.
14. Use Constant Selection instead of SUMCT and SUMGT within formulas.
15. Do review of order of restrictions in formulas. Do as many restrictions as you can before
calculations. Try to avoid calculations before restrictions.
17. Turn off warning messages on queries.
18. Check to see if performance improves by removing text display (Use ABAPer to test and validate that this ensures better code).
19. Check to see where currency conversions are happening if they are used.
20. Check aggregation and exception aggregation on calculated key figures. Before aggregation is generally slower and should not be used unless explicitly needed.
21. Avoid Cell Editor use if at all possible.
22. Make sure queries are regenerated in production using RSRT after changes to statistics, consistency changes, or aggregates.
23. Within the free characteristics, filter on the least granular objects first and make sure those come first in the order.

How to improve query performance of an ODS- with 320 million records

Issue:
The reports are giving time-outs while execution.
Scenario:
We have an ODS having approximately 320 millions of records in it.
The reports are based on
The ODS and
InfoSets based on this ODS.
These reports are giving time-outs while execution.
Few facts about this ODS:
There are around 75 restricted and calculated keyfigures used in the query definition.
We cant replace this ODS by cube as there is requirement of InfoSet on it.
This is in BW 3.5 environment.
Few things we tried:
Secondary Indices are created on the fields which are appearing in the selection screen of the reports. Its not worked.
The Restriction/Calculation logic in the query definition can be moved to backend. Will it make the difference?
Question:
Can you suggest the ways to improve the query performance of this ODS?
Your immediate response is highly appreciated. Thanks in advance.

Hey!
I think Oliver's questions are good. 320 Mio records are to much for an ODS. If you can get rid of the InfoSet that would be helpful. Why exactly do you need it? If you don't need you could partition your ODS with a characteristic and report over an MultiProvider.
Is there a way to delete some data from the ODS?
Maybe you make an Upgrade to 7.0 in the next time? There you can use InfoSets on InfoCubes.
You also could try to precalculation like sam say. This is possible with reporting agent or Information Broadcasting. Then you have it in your cache. Look that your cache is large enough. Maybe you can use a table or something.
Do you just need to make one or some special reports on a special time? Maybe you can make an update in another ODS writing just the result in it. For this you can use update rules or maybe analysisprocess designer (transaction RSANWB) is the better way.
Maybe it is also possible to increase the parameter for your dialog-runtime rdisp/max_wprun_time (If you don't know, you basis should. Else look here https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ab254cf2-0c01-0010-c28d-b26d04627e61)
Best regards,
Peter

How to improve query performance when query with mtart

hi all,
I need to know what is the best way to query out MATNR when i have values for MTART and WERKS?
When a user select a MTART and WERKS, a whole bunch of MATNR related to them are display out. How do i improve this query so that it does not take a long time?
Thanks
Willliam Wilstroth

Is that what you are looking for???
select a~matnr a~mtart ... b~werks ...
 into table <itab>
 from mara as a
 inner join marc as b
 on a~matnr = b~matnr
 where mtart = p_mtart
 and werks = p_werks.
There is an index on MTART in table MARA.
T Material Type
Kind Regards
Eswar

How to improve query & loading performance.

Hi All,
How to improve query & loading performance.
Thanks in advance.
Rgrds
shoba

Hi Shoba
There are lot of things to improve the query and loading performance.
please refer oss note :557870 : Frequently asked questions on query performance
also refer to
weblogs:
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695
This is the oss notes of FAQ on query performance
1. What kind of tools are available to monitor the overall Query Performance?
1. BW Statistics
2. BW Workload Analysis in ST03N (Use Export Mode!)
3. Content of Table RSDDSTAT
2. Do I have to do something to enable such tools?
Yes, you need to turn on the BW Statistics:
RSA1, choose Tools -> BW statistics for InfoCubes
(Choose OLAP and WHM for your relevant Cubes)
3. What kind of tools is available to analyze a specific query in detail?
1. Transaction RSRT
2. Transaction RSRTRACE
4. Do I have an overall query performance problem?
i. Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high number in all Info Cubes.
ii. You need to run ST03N in expert mode to get these values
5. What can I do if the database proportion is high for all queries?
Check:
1. If the database statistic strategy is set up properly for your DB platform (above all for the BW specific tables)
2. If database parameter set up accords with SAP Notes and SAP Services (EarlyWatch)
3. If Buffers, I/O, CPU, memory on the database server are exhausted?
4. If Cube compression is used regularly
5. If Database partitioning is used (not available on all DB platforms)
6. What can I do if the OLAP proportion is high for all queries?
Check:
1. If the CPUs on the application server are exhausted
2. If the SAP R/3 memory set up is done properly (use TX ST02 to find bottlenecks)
3. If the read mode of the queries is unfavourable (RSRREPDIR, RSDDSTAT, Customizing default)
7. What can I do if the client proportion is high for all queries?
Check whether most of your clients are connected via a WAN connection and the amount of data which is transferred is rather high.
8. Where can I get specific runtime information for one query?
1. Again you can use ST03N -> BW System Load
2. Depending on the time frame you select, you get historical data or current data.
3. To get to a specific query you need to drill down using the InfoCube name
4. Use Aggregation Query to get more runtime information about a single query. Use tab All data to get to the details. (DB, OLAP, and Frontend time, plus Select/ Transferred records, plus number of cells and formats)
9. What kind of query performance problems can I recognize using ST03N
values for a specific query?
(Use Details to get the runtime segments)
1. High Database Runtime
2. High OLAP Runtime
3. High Frontend Runtime
10. What can I do if a query has a high database runtime?
1. Check if an aggregate is suitable (use All data to get values "selected records to transferred records", a high number here would be an indicator for query performance improvement using an aggregate)
2. o Check if database statistics are update to data for the Cube/Aggregate, use TX RSRV output (use database check for statistics and indexes)
3. Check if the read mode of the query is unfavourable - Recommended (H)
11. What can I do if a query has a high OLAP runtime?
1. Check if a high number of Cells transferred to the OLAP (use "All data" to get value "No. of Cells")
2. Use RSRT technical Information to check if any extra OLAP-processing is necessary (Stock Query, Exception Aggregation, Calc. before Aggregation, Virtual Char. Key Figures, Attributes in Calculated Key Figs, Time-dependent Currency Translation) together with a high number of records transferred.
3. Check if a user exit Usage is involved in the OLAP runtime?
4. Check if large hierarchies are used and the entry hierarchy level is as deep as possible. This limits the levels of the hierarchy that must be processed. Use SE16 on the inclusion tables and use the List of Value feature on the column successor and predecessor to see which entry level of the hierarchy is used.
5. Check if a proper index on the inclusion table exist
12. What can I do if a query has a high frontend runtime?
1. Check if a very high number of cells and formatting are transferred to the Frontend (use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
2. Check if frontend PC are within the recommendation (RAM, CPU MHz)
3. Check if the bandwidth for WAN connection is sufficient
and the some threads:
how can i increse query performance other than creating aggregates
How to improve query performance ?
Query performance - bench marking
may be helpful
Regards
C.S.Ramesh
[email protected]

How to improve the performance of one program in one select query

Hi,
I am facing performance issue in one program. I have given some part of the code of the program.
it is taking much time below select query. How to improve the performance.
Quick response is highly appreciated.
Program code
DATA: BEGIN OF t_dels_tvpod OCCURS 100,
vbeln LIKE tvpod-vbeln,
posnr LIKE tvpod-posnr,
lfimg_diff LIKE tvpod-lfimg_diff,
calcu LIKE tvpod-calcu,
podmg LIKE tvpod-podmg,
uecha LIKE lips-uecha,
pstyv LIKE lips-pstyv,
xchar LIKE lips-xchar,
grund LIKE tvpod-grund,
END OF t_dels_tvpod,
DATA: l_tabix LIKE sy-tabix,
lt_dels_tvpod LIKE t_dels_tvpod OCCURS 10 WITH HEADER LINE,
ls_dels_tvpod LIKE t_dels_tvpod.
SELECT vbeln INTO TABLE lt_dels_tvpod FROM likp
FOR ALL ENTRIES IN t_dels_tvpod
WHERE vbeln = t_dels_tvpod-vbeln
AND erdat IN s_erdat
AND bldat IN s_bldat
AND podat IN s_podat
AND ernam IN s_ernam
AND kunnr IN s_kunnr
AND vkorg IN s_vkorg
AND vstel IN s_vstel
AND lfart NOT IN r_del_types_exclude.
Waiting for quick response.
Best regards,
BDP

Bansidhar,
1) You need to add a check to make sure that internal table t_dels_tvpod (used in the FOR ALL ENTRIES clause) is not blank. If it is blank skip the SELECt statement.
2) Check the performance with and without clause 'AND lfart NOT IN r_del_types_exclude'. Sometimes NOT causes the select statement to not use the index. Instead of 'lfart NOT IN r_del_types_exclude' use 'lfart IN r_del_types_exclude' and build r_del_types_exclude by using r_del_types_exclude-sign = 'E' instead of 'I'.
3) Make sure that the table used in the FOR ALL ENTRIES clause has unique delivery numbers.
Try doing something like this.
TYPES: BEGIN OF ty_del_types_exclude,
         sign(1)   TYPE c,
         option(2) TYPE c,
         low       TYPE likp-lfart,
         high      TYPE likp-lfart,
       END OF ty_del_types_exclude.
DATA: w_del_types_exclude TYPE          ty_del_types_exclude,
      t_del_types_exclude TYPE TABLE OF ty_del_types_exclude,
      t_dels_tvpod_tmp    LIKE TABLE OF t_dels_tvpod        .
IF NOT t_dels_tvpod[] IS INITIAL.
* Assuming that I would like to exclude delivery types 'LP' and 'LPP'
CLEAR w_del_types_exclude.
REFRESH t_del_types_exclude.
w_del_types_exclude-sign = 'E'.
w_del_types_exclude-option = 'EQ'.
w_del_types_exclude-low = 'LP'.
APPEND w_del_types_exclude TO t_del_types_exclude.
w_del_types_exclude-low = 'LPP'.
APPEND w_del_types_exclude TO t_del_types_exclude.
t_dels_tvpod_tmp[] = t_dels_tvpod[].
SORT t_dels_tvpod_tmp BY vbeln.
DELETE ADJACENT DUPLICATES FROM t_dels_tvpod_tmp
    COMPARING
      vbeln.
SELECT vbeln
    FROM likp
    INTO TABLE lt_dels_tvpod
    FOR ALL ENTRIES IN t_dels_tvpod_tmp
    WHERE vbeln EQ t_dels_tvpod_tmp-vbeln
    AND erdat IN s_erdat
    AND bldat IN s_bldat
    AND podat IN s_podat
    AND ernam IN s_ernam
    AND kunnr IN s_kunnr
    AND vkorg IN s_vkorg
    AND vstel IN s_vstel
    AND lfart IN t_del_types_exclude.
ENDIF.

How to improve the performance of the query

Hi,
Help me by giving tips how to improve the performance of the query. Can I post the query?
Suresh

Below is the formatted query and no wonder it is taking lot of time. Will give you a list of issues soon after analyzing more. Till then understand the pitfalls yourself from this formatted query.
SELECT rt.awb_number,
       ar.activity_id as task_id,
       t.assignee_org_unit_id,
       t.task_type_code,
       ar.request_id
FROM activity_task ar,
     request_task rt,
     task t
WHERE ar.activity_id =t.task_id
AND ar.request_id = rt.request_id
AND ar.complete_status != 'act.stat.closed'
AND t.assignee_org_unit_id in (SELECT org_unit_id
                               FROM org_unit
                               WHERE org_unit_id in (SELECT oo.org_unit_id
                                                     FROM org_unit oo
                                                     WHERE oo.org_unit_id='3'
                                                     OR oo.parent_id ='3'
                               OR parent_id in (SELECT oo.org_unit_id
                                                FROM org_unit oo
                                                WHERE oo.org_unit_id='3'
                                                OR oo.parent_id ='3'
                               AND has_queue=1
AND ar.parent_task_id not in (SELECT tt.task_id
                              FROM task tt
                              WHERE tt.assignee_org_unit_id in (SELECT org_unit_id
                                                                FROM org_unit
                                                                WHERE org_unit_id in (SELECT oo.org_unit_id
                                                                                      FROM org_unit oo
                                                                                      WHERE oo.org_unit_id='3'
                                                                                      OR oo.parent_id ='3'
                                                                 OR parent_id in (SELECT oo.org_unit_id
                                                                                  FROM org_unit oo
                                                                                  WHERE oo.org_unit_id='3'
                                                                                  OR oo.parent_id ='3'
                                                                 AND has_queue=1
AND rt.awb_number is not null
ORDER BY rt.awb_numberCheers
Sarma.

HI All, How to improve the performance in given query?

HI All,
How to improve the performance in given query?
Query is..
PARAMETERS : p_vbeln type lips-vbeln.
DATA : par_charg TYPE LIPS-CHARG,
par_werks TYPE LIPS-WERKS,
PAR_MBLNR TYPE MSEG-MBLNR .
SELECT SINGLE charg
werks
INTO (par_charg, par_werks)
FROM lips
WHERE vbeln = p_vbeln.
IF par_charg IS NOT INITIAL.
SELECT single max( mblnr )
INTO par_mblnr
FROM mseg
WHERE bwart EQ '101'
AND werks EQ par_werks (index on werks only)
AND charg EQ par_charg.
ENDIF.
Regards
Steve

Hi steve,
Can't you use the material in your query (and not only the batch)?
I am assuming your system has an index MSEG~M by MANDT + MATNR + WERKS (+ other fields). Depending on your system (how many different materials you have), this will probably speed up the query considerably.
Anyway, in our system we ended up by creating an index by CHARG, but leave as a last option, only if selecting by matnr and werks is not good enough for your scenario.
Hope this helps,
Rui Dantas

Inner Join. How to improve the performance of inner join query

Inner Join. How to improve the performance of inner join query.
Query is :
select f1~ablbelnr
         f1~gernr
         f1~equnr
         f1~zwnummer
         f1~adat
         f1~atim
         f1~v_zwstand
         f1~n_zwstand
         f1~aktiv
         f1~adatsoll
         f1~pruefzahl
         f1~ablstat
         f1~pruefpkt
         f1~popcode
         f1~erdat
         f1~istablart
         f2~anlage
         f2~ablesgr
         f2~abrdats
         f2~ableinh
            from eabl as f1
            inner join eablg as f2
            on f1ablbelnr = f2ablbelnr
            into corresponding fields of table it_list
            where f1~ablstat in s_mrstat
            %_HINTS ORACLE 'USE_NL (T_00 T_01) index(T_01 "EABLG~0")'.
I wanted to modify the query, since its taking lot of time to load the data.
Please suggest : -
Treat this is very urgent.

Hi Shyamal,
In your program , you are using "into corresponding fields of ".
Try not to use this addition in your select query.
Instead, just use "into table it_list".
As an example,
Just give a normal query using "into corresponding fields of" in a program. Now go to se30 ( Runtime analysis), and give the program name and execute it .
Now if you click on Analyze button , you can see, the analysis given for the query.The one given in "Red" line informs you that you need to find for alternate methods.
On the other hand, if you are using "into table itab", it will give you an entirely different analysis.
So try not to give "into corresponding fields" in your query.
Regards,
SP.

Please help me how to improve the performance of this query further.

Hi All,
Please help me how to improve the performance of this query further.
Thanks.

Hi,
this is not your first SQL tuning request in this community -- you really should learn how to obtain performance diagnostics.
The information you posted is not nearly enough to even start troubleshooting the query -- you haven't specified elapsed time, I/O, or the actual number of rows the query returns.
The only piece of information we have is saying that your query executes within a second. If we believe this, then your query doesn't need tuning. If we don't, then we throw it away
and we're left with nothing.
Start by reading this blog post: Kyle Hailey &raquo; Power of DISPLAY_CURSOR
and applying this knowledge to your case.
Best regards,
Nikolay

How many ways can i improve query performance?

Hi All,
can any body help me
How many ways can i improve query performance in oracle ?
Thanks,
narasimha

As many as you can think of them!!!

How to Improve the performance in Variable Selection Screen.

Hi,
In Query Level we have Variable " User entry Defalt Valu". User want select particular value when he press "F4" it's take hours time how to improve the performance in Varaible Selection Screen.
Thanks in Advance.
Regards,
Venkat.

Dear Venkat.
You please try the following steps:
1. Say the InfoObject is 0EMPLOYEE against which you have created the variable, which user is trying to select value against, when they execute the report.
2. Goto RSA1-> InfoObject tab-> Select InfoObject 0EMPLOYEE.
3. Selcet the following options:
Query Execution Filter Val. Selectn - 'Only Posted Value for Navigation'
Filter Value Repr. At Query Exec. - 'Selector Box Without Values'
Please let me know if there is any more issue. Feel free to raise further concern
Thnx,
Sukdev K

How to improve Query Performance

Similar Messages

Maybe you are looking for