How to include attachments with e-mail and to verify that they have been sent.

When I try to attach a document or photo to an e-mail and use "browse" to find the attachment, then click it. The only option is open. When I click that there is no evidence or indication that the attachment has been made. How can I attach photos or documents to e-mail messages? Then, how can I verify that the attachments have really been sent with the message?

* Outgoing (SMTP) server: you need to use your ISP (Internet Service Provider) SMTP server. Call your ISP to know your SMTP (mail sending) server. In case you are unable to get SMTP server, you can use WebMail for email sending.
For OUTGOING MAIL SERVER I am required to add the following:
HOST NAME
(usually looks like smtp.example.com - Since I have Comcast as my it would look like smtp.comcast.net)
USER NAME optional
PASSWORDptional
Since you use comcast, you have comcast e-mail. You need to ask them what the correct settings are to set up your comcast e-mail account on a mobile device and plug in the same information for the outgoing (SMTP) server for the account you're trying to set up.
Warning: I'll predict now that a lot of your e-mail will get filtered as spam on the receiving end because the domain name in your email address is NOT going to match the domain name of the server it's originating from.
You might want to look into a mail service provider that actually provides their own outgoing mail servers.

Similar Messages

How do I open with one click all the windows that I have been minimized? When I right click on the lower bar Firefox icon, I only see the option to close all windows.

It is used to be that I could right click on the Firefox icon on the toolbar at the bottom of the screen and I would then be given the option to open all windows. Now I only see the option to close all windows. The ability to open all windows is very useful. Have you eliminated this capability? It was a very helpful feature because I often have more than 15 windows minimized at one time. On a regular basis I like to open them all and keep only the ones that I still need. I know that it is possible to see the name of each window that is minimized by moving my cursor over the Firefox icon, but this does not provide enough information. So I have to open each window one at a time to look at it and then decide to close it or keep it - this is a frustrating, time-consuming process. Is there another way to open all the minimized windows at the same time, instead of one at a time?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
* Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
* Click the "View..." button and inspect the certificate and check who is the issuer.
You can see more Details like intermediate certificates that are used in the Details pane.

I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). Is there a way to get it back somewhere?

Hello,
I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). I was waiting to find out the correct email address of that person, put in in and then sen it...Is there a way to get it back somewhere on the ipad or in some cached folder?
Many thanks for an answe to this.
Swisslady2

There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again.

Mail is putting my emails in the draft folder even though they have been sent. What gives?

Mail is putting my emails in the draft folder and leaving them there even after they have been sent. This is not happening all the time, but enough that it's annoying. What gives? and how do I fix it?

It happens on both my Mac Air and my iMac. Both are version 10.7.5

TS5376 Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of.

Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of. When I click the ingore option it doesn't install corectly and I get a message saying MSVCR80.dll file is missing.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I an using a G5 Mac and when I use my AOL e-mail and send out an e-mail I am told that I have been "Black Listed" and I cannot send it.

I am using a G5 Mac and AOL e-mail. I cannot send a message out without being told that I have been "Black Listed"
I can receive message with not problems.

Hello,
To see if it's your provider, What's my ip...
http://www.whatismyipaddress.com/
Start with these three, check SpamCop or SpamHaus to see if your IP is there...
http://spamcop.net/bl.shtml
http://www.spamhaus.org/lookup.lasso
http://www.spamhaus.org/zen/
Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.
Might also see this post by Gallomimia...
http://discussions.apple.com/message.jspa?messageID=9465359#9465359
If none of those are it, then report back please.

I just want to organize my photos to albums and not appear anywhere else. Photos appear in Photos and no indication if they have been dealt with.

I want to load my photos onto my MacBook Pro, sort them into albums and not have them appear in other locations. If I go to Photos all of the photos in the computer seem to appear. I can't tell if they have been put in an Album or have been edited. Is there a simpler system that I can use.

iPhoto works similarly to iTunes. In iTunes, every track is in the Library and each playlist is a sub-set of the Library.
So, in iPhoto, every image is in the Library and each Album is a subset of the Library. So, your photos will always be visible in the Library and in any album you use them in. That - of course - means that any image can ne used in a multitude of albums, and use no extra disk space. So that shot of your son, daughter and their puppy can be in the Son album, Daughter album, Puppy Album and even a favourites album.
Photos and Events are simply two views of the Library - two doors to the same room as it were.
It's easy to find photos not in an Album - with a Smart Album:
File -> New Smart Album
Album -> is not -> any
and another will find Photos not editoed:
File -> New Smart Album
Photo -> is -> Edited.
As you edit a photo, or add it to an album, they will be dropped from the Smart Album.

I lost a lot of tracks while syncing my ipod touch with iTunes. I have managed to get some of them back with a free download, but iTunes will not let me dowload whole albums which I have paid for. It does recognise that they have been purchased. What do n

As I've already said to get this far: I have lost a lot of tracks while syncing my iPod Touch with iTunes. I have managed to get free downloads of some of the single tracks, but when I try to download entire albums the system informs me that I have already purchased them and a pop-up window informs me I can get them back from my "Purchased" file. I would not be trying to dowload them again if they were anywhere on the iPod, would I? The other problem seems to be that with single tracks I don't know before I hit the purchase button if I have picked it from the right album and I have had to pay for it again.
I feel that I have been totally ripped off by iTunes and, apart from ranting on this forum, I don't seem to be able to let my feelings known. It's like a guy from my local record store coming round and nicking my albums and telling me that it's tough!
The point here is folks, that it was syncing two Apple sites which caused the loss of these tracks and from what I've read elsewhere this is a regular fault. And please don't tell me that it's my fault for having a pc. Apple shouldn't sell a product for pc, when it doesn't work on pc!

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

HT201269 I downloaded the iOS7, lost all the custom ring tones that I had on my phone, how do i get them back. when I sync my phone, itunes says that they have been selected, but they don't show up on my phone

I downloaded the iOS7, lost all the custom ring tones that I had on my phone. the iTunes sync page says that they have all been selected but they don't show up in my phone? Help?

I had the same problem and was able to fix it. Go to your iTunes and click on the Tones folder on the left under library. Some of my ring tones had an exclamation mark next to it and those were the ones that did not sync. You have to click on those and find it in your computer. Once the exclamation mark is gone, go to Tones section of your device in iTunes, make sure you select the tones you want synced, and click apply. I hope that helps you!

How to set up recordings of audio and video so that they will sync

I'm editing footage of a dance concert that used CDs for some of the dances and a live pianist for the remainder. In addition to the audio captured by the camera, I have all the CDs that were used and an additional audio recording of the piano that sounds much better than what was captured by the camera. I would like to use to mix the audio from the camera with the audio from the CDs and the additional recording of the piano, but the sources won't sync properly, since the camera, the CD player, and the audio recorder all run at slightly different speeds. For example, if I zoom in and line up the CD audio with the camera audio at the beginning of a song that lasts 3:21, at the end of the song the CD audio is late by about 11 frames. That's enough that I can't use the camera audio as ambient sound, and enough that the dancers are noticeably ahead of the music (by 11 frames).
I know I could time-correct my sources so that they will sync, but I'm wondering how to avoid this problem in the future.
Thanks,
John Link

John,
On most professional recording or editing environments we try to run a sync signal to all the devices. Many of the audio recorders out there are not equipped to accept or send sync. For that matter, neither are the consumer and prosumer cameras. That's one of the many things dividing pro from non-pro.
Wild sync , just running at a true and constant speed, is a lot easier now than " in the day." but one still sees issues like you have when not running sync between devices.

Working with master pages and page layout, what I have been doing wrong

I have worked on customizing the page layout and the master pages for a couple of site collections.
But now I read two restrictions which I was not following 100%:-
I should avoid directly modifying any default templates, and instead of that I should take a copy and modify the copy. So that any future updates will not override my modifications.
Also I should avoid directly modifying the .aspx files, and instead of that I should edit the html file which will automatically reflect on the .aspx files.
So currently I have these cases inside my SharePoint sites:-
Inside my enterprise wiki site collection, I have being modifying the Enterprisewiki.aspx page layout, for example I added new columns such as Page title and I remove the page rating, also the chnaged the color and format for the page fields.
Inside my team site I took a copy of the seatle.master master page (I name it seatle_copy.master)and I apply my modification to the seatle_copy.master directly and not inside the .html file. Even I do not have a html version for the modified seatle_copy.master?
So can anyone advice how I can fix these two issues. For the first issue how I can make sure that my modifications to the EnterPriseWiki.aspx page layout will not get override during any future update.
also how I can generate an html version for my current seatle_copy.master file so that I can modify the seatle_copy.html instead of the seatle_copy.master in the future?
Please can anyone advice?

Hi johnjohn123,
1. I would definitely make a copy of the EnterpriseWiki.aspx page layout and make changes to that. You can then set your pages to use your custom page layout. Typically, I provision these via Visual Studio and a module for uploading them to the SharePoint
master page gallery.
2. For the master page, the html version is new to 2013 and is meant to simplify branding, however, it's not required. You can still work within master pages and provision those via features if you'd like. The key is to create your own master page and never
modify the default.
If you need code samples for any of the above, let me know and I can supply it.
Shereen Qumsieh http://sharepointdeveloperhq.com @msshushu

How do I notify a user that they have been successfully added to a group?

FIM has built in notifications for the group owner and also will notify the requestor when they are denied, but how would I go about notifying the requestor after the owner approves? I would like to send an email something like "you were successfully added
to group x". I tried to add a notification action on the end of the Owner Approval Workflow, but that doesn't seem to work?
Thanks,
Rich

The way I created all templates we ship in FIM was by creating them as an email in Outlook, send the result to myself, right-click on the preview and select "View Source". That gave me the HTML content to use.
/Andreas
This posting is provided "AS IS" with no warranties, and confers no rights. Use of included script samples are subject to the terms specified at http://www.microsoft.com/info/copyright.htm

I have lost my most important iphoto library. I have several different photo libraries that use and the one that I have been using for this entire year disappeared when I switched back to look at photos from an old library, please help, thank you.

I have also tried searching for them in finder and going through the trash, i have had no luck yet and confused on where they might be.

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see in the iPhoto window when iPhoto opens?
what fixes have you tried?
where is your library normally located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
how much free space on your boot drive?
If you launch iPhoto with the Option key held down you'll get a window with all libraries that iPhoto an find. What do you see in that window?
If you select a library in the window it's location will be shown directly beneath that window.

How do I report to a human being at iTunes that they have the wrong art?

I had iTunes download art for my library and in some cases it associated the incorrect art with albums. I can't find anywhere to report that. Help?

I don't know what you tried yesterday but it doesn't appear to have been asking for help since this appears to be your very first posting here. The same goes for the first responder to your post who appears to have only ever posted the one reply you received. If you (both) have a problem that you need help with you need to provide the details of the problem so that either a solution can be provided or you can be directed to a better resource for help.
It's unfortunate that the first responder didn't provide a phone number since there are mentions of phone calls being made, which is one way to talk to someone at Adobe - though it is not likely someone physically at the Adobe headquarters. I don't know any phone numbers to hand out myself.
Another option is to chat with someone. There are different channels available for chat depending on what your problem is. If one of the following looks like a match for your issue then give it a try. If none do, then try describing your issue(s) and maybe someone can help.
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Get help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )
Adobe ID and registration support (non-CC)
http://helpx.adobe.com/x-productkb/global/service-c1.html ( http://adobe.ly/19r6ZDp )

Projects and Albums. Could they have been more ambiguous?

Aperture is feature packed and does a great job editing images. What it doesn't do so well is make it clear EXACTLY what the difference between a 'Project' and 'Album' is. Could someone offer a CLEAR explanation as to what exactly a 'Project' is and why one would use it instead of an album or folder? Case in point. I processed about 400 images yesterday. Some were imported into a 'New Project' directly off the CF card. Others were imported as a folder into the 'New Project'. The folder that was imported was brought in as an album by Aperture. The images imported from the CF card itself are all contained in the project AND the folder. I know there is only one copy of each as the album versions are referencing the master file. But, I now want to move the processed images into an album and then export it. Exporting is another topic altogether...
TIA.

Dan Donovan wrote:
A photo can exist in one and only one PROJECT. Conversely, one photo can exist in as many ALBUMS as you like. The previously mentioned playlist analogy for Albums is great. One song can be in many playlists.
I look at Projects as photo shoots. The raw files from each of my photo shoots are kept in their own project. When I see the word Project, I automatically think "photo shoot".
So, where do albums come into the picture? If I shoot an executive portrait session on 7-12-08, I may create an album with just the favorite photos from that shoot. The album is a way to keep a certain group of images easily accessible. Then, what if the client wants to pull together portraits from that shoot and several others? In that case, I can create ANOTHER album with the exact same selects from the 7-12-08 shoot, PLUS images from any other shoot as well. The bottom line is that albums give you the opportunity to have the same photo in many locations.
Folders are a way to organize your projects, albums, websites, books, etc.
Great explanation thanks. But, you had to go and complicate it by mentioning folders...;-).

How to include attachments with e-mail and to verify that they have been sent.

Similar Messages

Maybe you are looking for