How to include hardware configuration in the installer?

I have a VI developed with LabVIEW 2009 V9.0f2 using a USB-6009 and two of its analog inputs. The VI uses the DAQ Assistant to configure the USB-6009. I include the DAQmx Core Runtime 9.0.2 with the LabVIEW Runtime Engine 2009 in the installer build. I spent most of the past week trying to get the application to run after installation.
If I leave out the Hardware Configuration from MAX (no configData.nce file) and run the installer on another machine the application produces an Error-200378 Custom Scale Specified Does Not Exist when it runs (I searched the 200378 error code - no help).
If I include the Hardware Configuration from MAX to produce a configData.nce file, and select Perform the Import Silently to Merge the Import Data when the installer is built, I get this message during the install to another computer:
.\Distribution.cpp(1902): IInstallerError 11004Developer Error. Distribution contains invalid dependencies:1. Product NI Remote Provider for MAX 4.6.1 ({FBD23528-31AC-412A-9DEE-6CEA814A7430}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.2. Product NI LabVIEW Real-Time Error Dialog ({297FA251-FF30-4F16-978C-4A65EA804EFF}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.3. Product NI LVBrokerAux 8.2.1 ({0FB31DF8-38DF-4C9D-B313-AFAFC3FBA02B}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.Correct the distribution and try again. I’m not really sure that the installer even uses the configData.nce file during the build.
Another error I have seen (I have done several other builds using various installer settings) is that the app appears to run fine except it is unable to find the USB-6009, even though the operating system picks it up and installs it in the device manager seemingly without error.
I am a novice LabVIEW user. Any help you could give would be greatly appreciated.
Bill
Solved!
Go to Solution.

Hi Willygene,
Give the steps listed in KnowledgeBase 52GH9OW5: Why Do I Get Error 200378 When Running a Stand Alone Application? a shot, does this help with the 200378 error?
Do you have DAQmx installed on the other machine? Are you unbundling it with your installer? If so, what Run-Time Level are you buiding into your installer? Can you post screenshots of the errors that you are getting?
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

Similar Messages

How to include a font in the installer?

Hi all!
My program uses a custom font (namely popular NI7seg font) that I would like to include in my installation distribution.
I am using LabView 8.5 and I have tried force the installer (normally through the options window) to copy the font into [WindowsFolder]\Fonts folder and to add a registry key.
After installation I have noticed that the font actually is added into the registry however it has not be copied to the fonts directory.
Any ideas?
Regards,
Michal
Solved!
Go to Solution.

Hi Michal,
At first, you should add the font file to LabVIEW project.
Then create a Source Distribution from build specification. In the source distribution setting, you can specify where to distribute the font file.
When you build your installation, you add the source distribution as source file to installer.
I'm not sure if you can skip step 2 to add the font file as source file to installer, but source distribution could work correctly.

How to run hardware diagnostic with the help of terminal?

how to run hardware diagnostic with the help of terminal? any cmds

Macs newer than 10.7's release just need to boot with the 'D' key.
Otherwise you need to find the original installer disk of the Mac, or call AppleCare for it to be able to run the hardware diagnostic.

How to include a report into the SAP-SCRIPT

plz tell me
How to include a report into the SAP-SCRIPT
ASAP

creat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*&      Form get_data1
      text
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data1 TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*&      Form get_data
      This form is to read details from LIKP    *
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
   READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM.                    "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

How to include a jButton in the jTable CellEditor?

sir,
how can include a jButton in the jTable cell Editor as we include checkbox & Combo inthe Cell Editor?
thks.

There is c:import tag in the JSTL that will include the HTML from a file on another server.

How to Including custom text in the step "User Decision"

Hi All
Please help me in this regards I got problem
How to Including custom text in the step "User Decision"
Regards
Poonam
Edited by: Julius Bussche on Feb 2, 2009 1:59 PM
Please use the corect forum, meaningfull subject titles and use the search before asking questions

Hi Poonam,
If I understood your problem correctly...
When you create a user decision a screen will appear.
In the decision tab under Title you can give your custom text.
Even if you want to give some variable (value of which will be determined at runtime) you can give that as well.
Like you have created a container for BOR objects MAT_DETAIL, in that object there is a field MATERIAL.
You can define your custom text as below:
Title: Would you like to create new material or display material &
Parameter 1: &MAT_DETAIL.MATERIAL&;
In Title you can give as max. as 4 &(ampersand). And each & will be replaced by each Parameter at runtime in same sequence.
In parameters you use to select the container defined by you earlier.
Hope this will help.

How to obtain hardware key during first installation?

I'm installing SAP Netweaver 7.0 and got stucked when the installer requested Solution Manager Key. I went to SAP site to generate the key and there I was requested the hardware key. As far as I understand, the hardware key may be obtained using saplicense program but I don't have it installed yet.
How can I provide the hardwaer key during installation?
Thanks
Renato

Hi,
You need solution manager system to generate the installer key..
Login into Solution manager system - and enter T-code SMSY
You may need to do the following steps:
1. Create a system by right clicking on System entry and select Create new system.
Enter the System Name i.e., SID (3 chars)
Product = (select from the list you which to install)
Product Version= (select from the list you which to install)
Save the entries.
2. Select Menu Item "System--->Other Configuration" and enter the SID which you have created earlier.
Enter the Server Name(hostname)
Finally click on Generate "Installation/Upgrade Key Button "
The system generates a Key ,copy that Key and paste it in the SAPINST screen when it prompts for Solman Key.

Can I include raw files into the installer folder with LV application builder?

Hello,
I have created a batch file that will run at the end of the installer, which will copy over some raw configuration files into the source destination so that the configuration files can be customized for each end user without rebuilding the installer with application builder. I also have an autorun.inf so the installer will automatically run when the user installs the CD.
However I would like to have some default configuration files and an autorun.inf file that will be automatically added to the installer "volume" folder using the application builder.
However I don't see a way to include raw files in the "volume" folder. It appears all source files in the application builder are embedded into the binary files.
Please let me know if this is possible with the current application builder.
Regards,
Russell
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor

Russel,
i think this link might give you some good hints....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to include NI-SPY in the Deployment system

Hello,
I would like to include the NiSpy in the deployment system I'm making. I included all the files in the 'C:\Program Files\National Instruments\NI Spy' directory and the 'nispylog.dll' located in the 'c:\winNT\system32\' directory.
The program is running when called, however when I select the 'Start Capture' (blue arrow) I get the following error message: 'NI Spy could not enable capturing because no API is selected. Please select at least one API from the Spy menu and try again. If there are no APIs' listed under the Spy menu, reinstall the National instruments driver software to fix this problem''
Can you advice me how to solve this problem?
a) Which files are missing?
b) If I want to install Ni Spy alone, how to do that?
Thanks
Rafi

Rafi -
NISpy has an installer and I would recommend using it instead of trying to figure out the files to install manually. The DriverCD that comes with TestStand contains the installer and it is typically located on disk2 at \components\visa\ni-spy\NISpy.msi. I suspect that various NI drivers also install support for their APIs, so using their installers would be appropriate.
Scott Richardson
National Instruments

How to include external files when building installer for a standalone executable?

Hi,
I was trying to build a stand alone executable from my Labview project and I was able to do it successfully. Now I would like to include a few external .txt files in the installer. Those .txt files have parameters/constants that will be used by the program, and my program needs to load/read them when running. For now I have to manually copy/paste them into the target machine, but I really hope the installer can do it automatically. I see there is a "data" folder in the installer, and that's where I hope those .txt files can be added into.
How can I do it? Can anyone give me some suggestions? Thanks!
Rgds
Harry
Solved!
Go to Solution.

Norbert,
I could not find "Add file" when right clicking the project. See attached image please. Under "Project" I do have a "Add to project" but there is no option for external files. I did not find "Source" location either.
What did i do wrong? Is there any version requirement here? I have a 2010 base version. Thanks for your help.
Rgds,
Harry

How to include DAQmx device drivers in installer (LV 7.1)

Hi,
We would like to build an installer that packages all required device drivers and does NOT require a separate installation from the DAQmx device driver CD.
How can we do this?
LV : 7.1 with Application Builder
H/W : USB-6009
DAQmx : 8.0
Presently, we use the DAQmx device driver CD (that accompanied the USB-6009) to install the drivers. We do not want to do it this way because:
1) It makes the installation a two-step process - (a) install DAQmx from device driver CD (b) install our application
2) It installs a lot of drivers which are not required by our application.
Thanks,
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hello Gurdas,
This question of yours brings up an issue we addressed when we released LabVIEW 8.0. In LabVIEW 8.x and later, you have the option to package multiple additional installers with your application installer.
The issue you are having is limited by LabVIEW 7.1, as it is capable of including only one additional installer. However, if you would like to create an installer in LabVIEW 7.1 and have it launch multiple additional installers, your only option is to create a batch file and have the LabVIEW 7.1 installer call this batch file.
We have KnowledgeBases available to explain this issue and the topic of creating batch files. Here are a few of these documents:
http://digital.ni.com/public.nsf/allkb/E09BA0E2F31D304F86256A640070058E?OpenDocument
http://digital.ni.com/public.nsf/websearch/B2640E34C4654F7B86256D07006D843D
Let me know if you have any further questions. Cheers!
Bob
Applications Engineering Specialist | National Instruments
-Bob

How to include help files when building installer

Hi!
How can I include my application help manual (in .pdf format) when building the installer such that the file goes into a designated folder and its link appears in the Start>Programs>App folder ?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Gurdas,
Add the .pdf as a support file in your executable
Create an installer for the executable
Under the "Files" button on the "Installer" tab select the .pdf and select "create program item".
This will place the .pdf in the start menu program group.
cheers,
Brett

How to include old invoices in the invoice list

How to Include old billing documents in the invoice list.
TO be more clear:-
I created 20 invoices in the monthof JAN
I maintained the factory calender in the payer master in the month of Feb 1st and created 10 more invoices in this month.
So the system is considering only the invocies which were generated after I maintained the factory calender (Only feb invoices).
Is there any process to include the previous invoicies (Jan invoices) also to get include in the invoice list.
Help me in this regards.
Regards,
Mallesh.

It is not possible.
Regards,
Rajesh Banka

How to include Material Cost in the SD report

Hi,
I am working on Cube 0SD_C03 for the Sales and Distribution Report "Sales Contribution - Product Wise u2013 KPI" where I have to show the following information which are given below.
1. Total Sales Qty.
2. Total Sales Value
3. Total Material Cost
For third one I do not know how to include this in this SD report.
so please tell me about this if anybody has idea about this?

Hi Francisco,
Note:
your xml should only have
<URL>http://dbxserver.dbxprts.com:7778/pls/apex/f?p=134:1:::NO::P1_ID_CONSTANCIA:1183</URL>
Show me your sample XML , i can help you.
What is your expected output ? PDF or HTML ?
here it is.
option1:
If the XML data includes an element that contains a hyperlink , then you can use that element to create dynamic hyperlinks at runtime.
a. insert hyperlink from word menu
b. In the Type the file or Web page name field of the Insert Hyperlink dialog box, enter the following syntax:
c. {ELEMENT_NAME_WHICH_HAS_URL_LINK}
where ELEMENT_NAME_WHICH_HAS_URL_LINK is the xml data element name
option2:
create a form field, you can add it
<fo:basic-link external-destination="http://www.google..com">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link external-destination="{ELEMENT_NAME}">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link>
<xsl:attribute name="external-destination"><xsl:value-of select="ELEMENT_URL"/>
</xsl:attribute>
<xsl:value-of select="LINK_NAME"/>
</fo:basic-link>

How to include resource files in the application and how to retrieve ?

Hi,
I want to include resource file in my application jar file and retrieve data from the file ......Is there any way for it? How i create these resources files and how i include them?.........Which classes shall i use for retrieving the data from these files?.........Any kind of help would be appreciated........Iam using NetBeans IDE 6.1,CLDC1.0 and MIDP 2.0........Thanx,in advance..........

How i create these resources files and how i include them?How you create the files will depend on what resources you need to include.
[How to ask questions the smart way|http://catb.org/~esr/faqs/smart-questions.html]
db

How to include hardware configuration in the installer?

Similar Messages

Maybe you are looking for