How to Include one iView into another iView
Hi All,
My requirement is to have 3 input fields across many iviews. on entering the values in those fields, i will invoke a Web Service Model.
I dont want to keep these 3 fields in all iviews, rather i am planning to create one iview with 3 fields integrated with model and call this iview in many other iviews.
How do i achieve this in wed dynpro coding. In JSP, there is a concept called "Include Jsp Page" . Is there any similar kind of functionality in WD.
Kindly guide me .
Reg/Venkat
Hi,
In the portal, create a page and place the iView having the three input fields on top. Place the second iView below. Keep differing the second iView for every page. In this way you can make the iView with 3 input fields only in the desired pages. You can use EPCF to invoke / navigate to another iView.
Regards
Srinivasan T
Similar Messages
-
How to include one view into another view
Hi SDN's,
Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
LIKP-KUNNR -> KNA1-ADRNR
KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
LIKP-ERNAM -> USR21-BNAME.
USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
USR21-PERSNUMBER -> ADR6-PERSNUMBER.
In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim -
I need to include one workflow into another
I need to include one workflow into another
IAM try to include one workflow into another workflow, whether it is possible or not.
if it is possible means, give the step to perform this action and some sample logicHi,
You can achive this in a very simple way.
Create a activuty step. ( In general we need to create a task here )
Add/ paste the workflow template number insead of creating the Task.
Make the required binding.
Thanks and regards,
SNJY -
How to call one JSFF into another JSFF
Hi,
I am very new to ADf. Could you please tell me how to call one JSFF inside another JSFF. We have a common pop-up written in one JSFF. Is there any best approach to get this pop-up into other JSFF.
Thanks in Advance.
Regards
NarasimhaIf you want to resue the jsff code, make use of bounded task flow with page fragment and then use it as a region.
For more details you can refer: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/taskflows_regions.htm
One more:
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_57/jdtut_11r2_57.html -
How to copy one schema into another
I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
I have a dmp file of source-schema (created daily with expdp by our backup schedule).
Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
The dmp file was created with:
expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
Create the copy on dest-schema with:
impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
(dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
If this approach is not feasible, kindly suggest me an alternative.
Thank you.
Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)Thank you both. Dean, I've made a note of your proposed command. May use it next time.
In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
First I ran these command logged in as SYS
GRANT Import Full Database TO dest-schema;
GRANT Create Any Directory TO dest-schema;
GRANT Unlimited Tablespace TO dest-schema;
impdp
dest-schema/pwd
DIRECTORY=dmpdir
DUMPFILE=myproject.dmp
REMAP_SCHEMA=source-schema:dest-schema
TABLE_EXISTS_ACTION=REPLACE
LOGFILE=implog.log
There were some errors though. The import process complained about constraints referencing non-existent primary keys.
It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
- are not part of the DUMP file
or
- are in the DUMP file but skipped during import
Don't know if this is a bug or by design behavior. -
How to merge one library into another library?
In iPhoto 9.6, is it possible to merge one library into another library? Or otherwise, import individual pictures, from one library into the other library? All of this happening on the same computer.I understand that this feature was covered by Aperture but that this is no longer supported under Yasemite?
No
The current version of Aperture can merge libraries (I have no idea where you got the incorrect information that it can not)
The paid version of iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can
Those are you only two choices
LN -
How to add one DC into Another
Hi
I have created one DC ,now I want to use this DC into another.
My application is like:
I have one i/p field and beside it one button which calls another DC.So how to do this?
Thanks
PrajaktaHi,
This link will solve your problem.
WebDynpro DC -create and use
Correct steps to use Java class in WD Java DC from another WD Java DC
For any queries feel free to ask.
Regards,
Praveen -
Including one program into another
I have a big java program and it contains lot of data declarations. I want to have all these declarations in another java program and include that program into my main prorgram. How do i do it??
Please help me out in this.
Thanks in advance...iconabhi wrote:
Well,Can i create another java program and put all the declarations in that program and then include this program in the main program which uses the data declarations?Your usage of the term "java program" is unclear at best. What do you mean? Are you talking about a class?
What kind of declarations are that? Can you give us an example and tell us aproximately how many there are of those?
If you don't provide more details your question can only be answered by guesswork and thus the answers won't be of much use to you.
Also, if you find a few minutes, you might want to read http://www.catb.org/~esr/faqs/smart-questions.html
regards -
How to insert one document into another in microsoft word?
I would like to set up a word document such that the document has embedded in it another document shrunk down a bit to make room for additional comments and information which I will add on the side. I've been looking to see if word 2007 has this feature
but have had difficulty finding it. Is it possible to take an entire document and insert it as a resizeable object into another?
Some of my research suggests that I might be able to accomplish something of this nature with publisher, and while several people in my office do not have publisher and we'd prefer if it were doable in word, instructions for publisher would be appreciated
as well if Word 2007 cannot do this.Hi,
Thank you for using
Word IT Pro Discussions
forum.
From your description, I understand that
you would like to know to how to add a Word document into another Word document in Word 2007, and you can make some comments besides the embedded Word documents.
If there is any misunderstanding, please feel free to let me know.
Thank you for your inquiring.
To insert a Word document to another Word document in Word 2007, follow the steps below:
=========
1.
In the Word document, click the
Insert tab.
2.
Click the
Object in the Text group.
3.
Click
object. Then click the Create from file tab.
4.
Click the
Browse button to select the Word document. Also, check the checkboxes before:
Link to file and Display as icon.
5.
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang -
How to include one layout into other layout in Oracle Site studio designer
Hi all,
I have created the Header as on layout(This is my project specific even if we can go for fragments) in oracle site studio designer. It is the same case for footer, Left Nav. All these are primary pages in different sections. Now I have created the new primary page in different section, I would like to include all these layouts in to one layout and show the preview i,.e Header in the header place. Footer in the footer place.
First of all, will it be possible? If so, could you please tell me how to go about this?
As I am new to this site studio designer, I am really clueless in this matter. Please come forward with ideas.
Any help would be much appreciated.
Regards & thanks,
Nirmala Vijaya Sekhar VarreWhat is the version of Site Studio are you using?
Do you want your layouts to be editable by contributors or you want to pick things from the content server and show? -
How to move one array into another...
Move the values in temp[] into scores[][].
int temp[]= {34 ,24,78,65,45,100,90,97,56,89,78,98,74,90,98,24,45,76,89,54,12,20,22,55,66};int scores = new int[5][5];
Thanks
cwell last try... :)
some chars just dont display... when I use [ _pre_ ]
tagg
public static void main(String[] args)
int temp[]= {34
{34
,24,78,65,45,100,90,97,56,89,78,98,74,90,98,24,45,76,89
54,12,20,22,55,66};
int[][] scores = new int[5][5];
int k = 0;
for( int a=0; a<scores.length; a++ )
for( int b=0; b<scores[a].length; b++ )
scores[ a ][ b ] = temp[ k++ ];
for( int a = 0; a<scores.length; a++ )
for( int b = 0; b<scores[ a ].length; b++ )
System.out.print( scores[ a ][ b ] + " ");
In case you're wondering, this is my reply from the Advanced Topics forum decoded into a "New to Java" forum answer. ;) Also an illustration of a bug in the code brackets. -
How to morph one photo into another?
Hi
Does anyone know how to do a simple photo morph in Flash CS4? I have image 1 on keyframe 1, and image 2 on keyframe 25, but aren't sure what kind of tween is required or what to do with the tween.
Thanks
ShaunYou probably won't get what you expect (image morphing is not 'simple'), but... What you need to do is select each image on the stage and choose Modify -> Bitmap -> Trace Bitmap. The smaller you set the value in the panel that appears, to higher the image quality when it's done. Then you select the first and choose Insert -> Create Shape Tween.
-
How to merge one library into another? Followed directions with no luck.
3.4.3 library add/merge problem. 13"rMBP trying to add (in this case) a 900MB library into my larger 200GB library. I have tried dragging and using the menu items with no luck. The pop-up display says merging and when done I don't see the new project in the larger library. Right before the operation is complete I see the project (library) title fly from the project list back to the finder. Very confusing. Has anyone else heard of or experienced this problem. Thanks.
LelandDoes the library that you want to to merge into your other library contain images or projects that already are in your main library? In that case you may not see a new project, but the new images may be merged into the older projects.
Or are all images in the library that you want to merge are new images? Is the file size of your Aperture library larger after merging?
There has been a buggy behaviour reported, that merging does not work, if all new images have been imported from the Photo Stream. -
When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?
The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
PLEASE HELP!
-Old Appel -
How to get a value from one item into another
How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael
Maybe you are looking for
-
I would like to create a website in iWeb '09 which will require multiple users to contribute/publish content, but the other site collaborators do not have Macs, just Windows-based PCs. Question: If multiple people are needed to publish content to the
-
Maintaining high scores after a restore
If I restore my ipod touch, and then use the auto-back ups to put everything back on the ipod, will the highscores in games be deleted? or are they automatically stored in the back up? Thank you
-
Phone shuts down. sim code correct.
I turned my phone off at the airport and somehow(???) got my sim code wrong 3 times. Even tho when it asked me to put in sim, and it was correct, it refused to operate. It got to a point of ' Phone is disabled. Connect to itunes. I had a tech guy fro
-
Dreamweaver CC 2014 hängt sich beim Öffnen einer lokalen Joomla-Site (>50.000 Dateien) unter Mac OS X (10.9 und 10.10) zuverlässig und wiederholbar beim "Sitemap aufbauen" auf. Löschen von Cache und Einstellungen hilft nicht. Dreamweaver CS6 hat mit
-
Pers Area, Sub area, Emp Group & Emp Subgroup to which user is authorized
Hi Experts, I'm working on an issue right now and it involves fetching the Personel Area, Sub Area, Employee Group, Employee Subgroup to which a user authorization to while hiring an employee. Any idea how i can get this information from the Authoriz