How to include username and passowrd in the wsdl file?

Hi...
    I have done soap to file sceanrio. In that i have generated wsdl file and consumed it through the infopath. While executing through the microsoft infopath, it is asking for the userid and password. Can i include the id and password in the wsdl file itself which i will generate in ID? If yes/, please tell me the procedure to do it.

As Amir suggested, you may provide in the URL but I wouldn't suggest it though. You don't want to hard code the user ID and password within in the WSDL because it is a bad practice especially the user ID and password may be different in different systems and every time you change the password, you have to regenarate your WSDL.
May be you thought through this but just in case if you didn't
KK

Similar Messages

  • How to pass username and password with the portal url

    i want to access portal from my web site. i have created username and password fields in my web page. when submited , my portal page should open. so how to pass username and password with the portal url.

    This is not straightforward; but it is doable.
    First tell us about your portal version; portal 10.1.4 has a slightly different method of doing it and the pre-10g portals were completely different animals.
    And if you are in AS Rel 2, then the most important document for you would probably be the following:
    [Creating Deployment Specific Pages| http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/custom.htm#i1015535]
    You might want to use it in conjunction with some metalink notes about your portal version and such a login page.
    hope that helps!
    AMN

  • How to include WS-Security Header in the WSDL

    hi
    how to include WS-Security Header which have username and password as
    i had seen the below link it deals with just hello world which is not using any Services(DBAdapter) is it possible to use DBAdapter as the steps present in the below link how to include WS-Security Header which have username and password
    http://blogs.oracle.com/reynolds/2005/09/invoking_bpel_from_an_html_for.html

    As Amir suggested, you may provide in the URL but I wouldn't suggest it though. You don't want to hard code the user ID and password within in the WSDL because it is a bad practice especially the user ID and password may be different in different systems and every time you change the password, you have to regenarate your WSDL.
    May be you thought through this but just in case if you didn't
    KK

  • How to read from and write into the same file from multiple threads?

    I need to read from and write into a same file multiple threads.
    How can we do that without any data contamination.
    Can u please provide coding for this type of task.
    Thanks in advance.

    Assuming you are using RandomAccessFile, you can use the locking functionality in the Java NIO library to lock sections of a file that you are reading/writing from each thread (or process).
    If you can't use NIO, and all your threads are in the same application, you can create your own in-process locking mechanism that each thread uses prior to accessing the file. That would take some development, and the OS already has the capability, so using NIO is the best way to go if you can use JDK 1.4 or higher.
    - K
    I need to read from and write into a same file
    multiple threads.
    How can we do that without any data contamination.
    Can u please provide coding for this type of task.
    Thanks in advance.

  • How to include in table of contents the list of figures and list of tables?

    How to include in table of content the "Table of contents", "List of figures" and "List of tables"? All are generated with function Table of contents, but they will not appear in generated table of contents even if they have proper style of headings - Heading 1, as other chapter.
    I get this in generated Table of contentes of my dissertaion thesis:
    Table of contents
    Preface
    Table of contents <- missing
    List of tables <- missing
    List of figures <- missing
    Introduction
    Main
    Conclusion
    Is it ok, that generated lists are not included in table of contents?

    You've just confused me.
    My understanding of how this is set up is that either:
    This is a book, and there is a master TOC that includes all book documents and a document-specific TOC in each component file, or
    This is a single file and there is one master TOC that includes all sections and a section-specific TOC that includes only the individual section.
    In the first case, I think you would want two TOC styles set up, one that includes the chapter heads (if I understood how you said this worked) for the for the master, and you would include all docs in the book when you generate it, and a second style for the individual chapters, with the subheadings you want to include.
    In the second case, it would be similar, but instead of only one style to cover the section TOCS, I think you would need to create a unique set of pargraph styles for the headings in each section (they can all be the same format, based one section, just with unique names), and then make a TOC style for each section that includes only the styles from that section.
    OK,  wait a sec. I just reread what you said: "Another thing: when the numbers are "linked" and updating well, they  display indide a little box. Not a text box, but a kind of little frame  around the numbers. That frame makes it imposible to delete just one  number: when the TOC says that Section 6.1 is in page 135, for example,  you cannot delete just the 5, it deletes, not just the 3 numbers, but  also the doted tab."
    I think these are NOT normal TOCs created by using Layout > TOC (but you could replace them with ones that are, if you set up your styles properly and the text you want to include is appearing on the pages). Those little boxes you mention sound like cross-references, which should update automatically without any intervention at all. Unfortunately, cross-refs can be flakey, especially if they point to another document. I'd open the cross-refs panel and see if you need to recreate a bunch of links.

  • The server (UCM server name) at IDC Security /oracleUCM/idcplg requires a username and passowrd.

    Hi ,
    I am getting the prompt asking for username and passoword whenever trying to login to UCM. Please find the details as given below. I am using UCM 10gR3 with Apache server and database is oracle 11g.
    The server at IDC Security /oracleUCM/idcplg requires a username and passowrd.
    warning: This server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection)
    Can anyone please help me out to resolve this issue.
    Thanks,
    Prangya

    Hi,
    It’s not leading to UCM Server Login page. I supposed to give the user name and password in the UCM Server Login page but before that its asking for the username and password and even after giving the user name and password also it’s not taking. It keeps on asking for the user name and password. Can you please help me out on this.
    Thanks.

  • TS1702 How do change the old Apple ID username and password to the updated username and password for the apps store?

    How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?

    cbkitche wrote:
    How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?
    Do you mean you kept the same account but you only updated your AppleID?
    Just log out and log back in with new ID.
    Note that the AppleID is embedded into the item at purchase and cannot be changed.
    However, when you change your AppleID, it will link the old account name to the new account name so you will not have any problems updating apps using the new AppleID.

  • This is how I am supposed to contact to have my annual creative cloud membership refunded?  I cancelled immediately upon seeing the charge and followed the instructions given and wound up here.  Am I supposed to share my username and password with the for

    This is how I am supposed to contact to have my annual creative cloud membership refunded?  I cancelled immediately upon seeing the charge and followed the instructions given and wound up here.  Am I supposed to share my username and password with the forum?  Adobe, I am about to go social with my frustrations!

    No, this is a public forum, as in user-to-user, so you should not share any private information here.  You will need to contact Adobe Support by chat or phone, which is apparently getting harder and harder to do.  Use the link below and choose the Still Need Help? option at the bottom in the blue area - in the section that opens take your pick of chat or phone.
    Contact Customer Care

  • How do i change proxy settings so it doesnt keep asking me "authentication req. The proxy web2.ucsd.edu is requesting a username and password. The site says: ucsd Squid Proxy-cache"?

    I changed my proxy setting to access a restricted school website. I don't know how to change it back to normal settings! Every time i'm browsing internet, Authentication Required windows pop up like 4-7 times a day! randomly! it says "the proxy web2.ucsd.edu:3128 is requesting a username and password. The site says: UCSD Squid proxy-cache". and makes me put in username and password every time. sooo annoying. how do i make the setting go back to default??

    1. Open firefox
    2. Go to "Tools" tab
    3. Go to "Options"
    4. Click on "Advanced"
    5. Open "Network" tab
    6. Click on "Settings"
    7. Select "No Proxy"
    8. Click "OK"

  • I have updated my username and password, but the system keeps asking for my password for an old email for which I have no password.. How can I fix this?

    I have updated my username and password, but the system keeps asking for my password for an old email for which I have no password.. How can I fix this?

    Are you signed into this old ID ("email") in System Preferences>iCloud, System Preferences>Internet Accounts (Mail,Contacts,Calendars), or in Mail>Accounts, Calendar>Accounts or Contacts>Accounts?

  • I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

    Hello everyone
    I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
    And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
    Hope you guys can help me!

    You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

  • How-to access username and password protected Java EE Web services from ADF

    The title of this post is exactly the same as this article by Frank Nimphius:
    http://www.oracle.com/technology/products/jdev/howtos/1013/protectedws/access_protected_web_services_from_adf.htm
    The article addresses the problem of securing web services using usernames and passwords, when those web services are accessed through a proxy or a data control. In the examples, the user names and passwords are specified, whether in the code or the definition of data controls. (SKING/SKING).
    In a very common scenario, users login to reach a page, for example, A.jspx, which contains a button that calls a web service, for example displayDate. Suppose that user has logged in by username/pass of (AHUNOLD/AHUNOLD) and AHUNOLD has access to the service and the page. Is there any way to pass the logged in user name and password to the webservice ? Of course we can hard-code the username in the data control definition or proxy code, but this is just one of the thousands of users who have access to the service and the authentication is not dynamic this way.
    Hope my question is clear. Wishing you all a great Christmas.
    Farbod

    Hi Frank, and happy new year.
    Are you implying that it couldn't be done declaratively? What is your suggestion for this problem? You know the problem... As I described:
    - I need to secure my web services, so when exposed, no one from inside network or the internet, can access the web service without proper permission
    - The web services are shown as web controls on jspx pages. The user has logged in before reaching the page. It is irrelevant to ask him to enter user name and password again.
    - I have user names, passwords and roles in Oracle Internet Directory (Identity Management). It provides some APIs and I can retrieve the usernames and attempt logging in programmically. But how can I get username and password from the session in ADF application?
    I guess using SAML or certificate could be the solution, but I have a problem with SAML, described here:
    Re: Webservices Security, SAML, and Identity Management (OID)
    Best Regards,
    Farbod

  • How to hide username and passward in  web reports

    Dear friends
    Im runing one report on web but its showing the username and passward in the URL (address bar) can you please help me how to hide that passward.......
    let suppose the username/passward is scott/tiger
    thanks with regards

    for hide the password follow thses steps
    user_name := get_application_property(username);
    pass := get_application_property(password);
    conn := get_application_property(connect_string);
    con_url := 'userid='||user_name||'/'||pass||'@'||conn;
    /* Convert the connect string into a hexadecimal character string. */
    FOR i IN 1..LENGTH(con_url) LOOP
    v_a := ltrim(to_char(trunc(ascii(substr(con_url,i,1))/16)));
    if v_a = '10' THEN v_a := 'A';
    elsif v_a = '11' THEN v_a := 'B';
    elsif v_a = '12' THEN v_a := 'C';
    elsif v_a = '13' THEN v_a := 'D';
    elsif v_a = '14' THEN v_a := 'E';
    elsif v_a = '15' THEN v_a := 'F';
    end if;
    v_b := ltrim(to_char(mod(ascii(substr(con_url,i,1)),16)));
    if v_b = '10' THEN v_b := 'A';
    elsif v_b = '11' THEN v_b := 'B';
    elsif v_b = '12' THEN v_b := 'C';
    elsif v_b = '13' THEN v_b := 'D';
    elsif v_b = '14' THEN v_b := 'E';
    elsif v_b = '15' THEN v_b := 'F';
    end if;
    con_url_temp := con_url_temp||'%'||v_a||v_b;
    END LOOP;
    path:='/reports/rwservlet?server=repserver4&destype=cache&'||con_url_temp||'&report='||rep_path);
    web.show_document(path);
    kuljeet pal singh

  • How to supply username and password for consuming webservice in BizTalk Adaptor?

    While I hit the web service directly , I am able get response from that service, it asked for username and password, after that it processed the request and gave expected output. I am trying to consume the same web service (https) from BizTalk orchestration
    ,  it created message type , port type, binding for me , all fine, but while sending message to the webservice , it throws error like this 
    <SOAP-ENV:Fault xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wd="urn:com.abc/bsvc">
    <faultcode>SOAP-ENV:Client.authenticationError</faultcode>
    <faultstring>invalid username or password</faultstring>
    </SOAP-ENV:Fault>
    I have given username and passoword in port level. I tried basic binding, I also tried wcf_basic binding , but no luck. These bindings were generated by wizard only, I Imported those bindings , ports got created, I just added username and password in the
    port level.
    How should I supply username and password in BizTalk to get this working ? Any inputs would be greatly appriciated
    Regards
    Vivek

    Hi,
    the way to resolve this is to write a Wcf Custom Behavior.
    Several people have blogged about this and Microsoft have written some articles:
    http://social.technet.microsoft.com/wiki/contents/articles/627.using-custom-behaviors-with-the-biztalk-wcf-adapters-part-2.aspx
    http://msdn.microsoft.com/en-us/library/cc952299(v=bts.10).aspx
    The articles are old so you need to verify they still apply.
    mark

  • How to retrieve username and domain name on Macintosh.

    Hi,
    Can anyone tell me how to retrieve username and domain name on Macintosh
    Thanks
    Priyanka.

    There is no system property for the domain name.
    Can you please tell me some other way for solving
    this problem.No. If it's not an environment variable (System.getEnv IIRC) and no property, you can't get it without native calls using JNI or Runtime.exec/Process.

Maybe you are looking for

  • Iphoto stopped importing photos from iphone 6.

    All of a sudden, iPhoto 9.2.3 stopped importing photos from my iPhone 6 (iOS 8.1.2).  It says "All photos have already been imported" which they have not.  I still have photos in Camera Roll which iPhoto did not import.  At the same time, I started r

  • Questions about JPQL in Netweaver 7.1

    Hello forum. During the last weeks we tried to migrate a JEE 5 application to SAP Netweaver 7.1.  We encountered quite a few unexpected problems, most of which were related to JPQL queries. This is the entity structure which we were (and still are) u

  • ERROR: Your password and confirmation password do not match. [******] - has been ignored.

    In IE8m 7, 6, this error occurs. Instead of allowing the registrant to correct the mis-matched password, BC submits the form and places this in the submission report: ERROR: Your password and confirmation password do not match. [******] - has been ig

  • How do I retrieve a group txt that hasn't been sent

    Was typing a message to a few friends had to come out my messages now I cannot find the message I was tryin to send to my mates. Now I've started again but there is a bubble next to each of mates name. Wat the feck does this bubble mean and who do I

  • Wlst deploy error - Type Error

    Hi, I'm getting a problem when I use wlst.deploy from within a jython script that is being invoked from ant. Something to do with the number of parameters being used to call deploy. I've tried both three and four parameters, but get the following mes