How to increase the speed of video (avi file) using labview

How to increase the speed of video (.avi file) using labview? I have tried this by skiping alternate frames. also I have used minimum time delay.Is there any other option for which i can go?
please suggest me...........

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Similar Messages

How to increase the speed of Zoom on TIFF image

Hi everyone,
i m doing zooming operation on tiff image.
when i applied zoom in operation on image which have properties
Bit per sample =1
Image Length = 2200 Pixel
Image Width = 1700 Pixel
Resolution(x) = 200 dpi
Resolution(y) = 200 dpi
then it require 2 sec.
then i apply the same code with tiff image which have properties like,
Bit per sample =1
Image Length = 3300 Pixel
Image Width = 2500 Pixel
Resolution(x) = 300 dpi
Resolution(y) = 300 dpi
then it require 9 to 10 sec.
my code is:
RenderedImage src= oriRndImage[selectedButtonIndex];(orirndImage is Rendered
Iamge)
//Transfer Current RenderedImage object into BufferedImage object
Raster ra= currRimage.getData(); //it take time.
DataBuffer db = ra.getDataBuffer();
SampleModel sa = ra.getSampleModel();
ColorModel cm = currRimage.getColorModel();
final BufferedImage currImage = new
BufferedImage(cm,Raster.createWritableRaster(sa,db,null), false, new
Hashtable());
//Create new Bufferred Image
BufferedImage bi = new BufferedImage(zoomW,zoomH, BufferedImage.TYPE_INT_RGB);
Graphics2D g = bi.createGraphics();
double scaleW = (double)(zoomW)/(double)(prev_width);
double scaleH = (double)(zoomH)/(double)(prev_height);
transAtZoom = AffineTransform.getScaleInstance(scaleW,scaleH);
g.drawRenderedImage(src, transAtZoom);
can any one plz suggest me the way ,how to increase the speed. of Zoom effect?
how to handle this problem?
thnxs..

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

How to improve the speed for backing up files to time capsule via in hose wifi?

How to improve the speed for backing up files to time capsule via in hose wifi?

via in hose wifi?
Use a bigger hose??
House??
Need to spell this out a bit more..
But speed via 2.4ghz to the TC is restricted by Apple to max 130mbps link speed.. much slower actual transfer.. latest TC and laptops can do 450mbps on 5ghz but you need to be up close.. so place the TC near the device using it.. and force 5ghz connection by using a different name for 5ghz network.

How to check the resolution of a pdf file using Acrobat 9 pro?

How to check the resolution of a pdf file using Acrobat 9 pro?

PDF files don't have one resolution, but may have none or many different resolutions, one per image. You can check the maximum/minimum resoluion with preflight in Acrobat Pro, but not in Adobe Reader.

How to read the content of ms-word file use pure java???

how to read the content of ms-word file use pure java???

hi,
check this: http://jakarta.apache.org/poi/

How to increase the speed of producer-consumer architecture

Hey everyone -
This is a follow-up to a previous thread that I had posted (
http://forums.ni.com/t5/LabVIEW/How-to-use-a-dynamic-true-false-signal-with-a-case-structure/m-p/114...
), but my next question has taken a bit of a different direction so I have made a new thread.
Following tbob's suggestion, I am trying to use a producer-consumer architecture to start and stop data acquisition from a simulated NI 9237 device. I have attached the current version of our code to this post (Producer_Consumer_architecture.vi). Our main problem is that there is a significant lag between when elements get added to the queue using the Enqueue function, and when they are removed from the queue using the Dequeue function. As a result, the signals from our simulated DAQ channels run for much longer than they are supposed to, and the start-and-stop of data acquisition is not keeping in time with the simulated square wave signal (we would like our NI 9237 device to acquire data when the square wave has an amplitude over 3, and stop acquiring when the amplitude is under 3). If you allow the program to run for about 30 seconds, you will see what I mean (press the stop button twice to quit the program).
If anybody has any suggestions as to how we can increase the speed of the program, they would be very much appreciated!
Thanks in advance!
Attachments:
Producer_Consumer_architecture.vi ‏122 KB
Save_data.vi ‏14 KB

hello,
i don't have tools needed but , i see one thing is that you enqueue
every time you are greater 3 that means about every 2-3 ms so consumer is really sought
is it really what you want ?
may be you want to start on a treshold so you can use a treshold fonction
if i don't make mistake your square is 10 hz and the daq is configured 25000 sample 25000 hz
so you aquire 1s of signal every 100ms , there is something to correct
make tests and tell us
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

How to increase the speed of my producer loop?

Hi,
I try to monitor two CAN channels and to compare values online. That's why I use a producer loop to collect all CAN messages and a consumer loop to calculate some stuff. But the producer is to slow. The queues of my CANCard are full after some minutes. The queues are already set to maximum.
The first Channel runs with 500 kBit/s, the second one with 125 kBit/s.
Should I use two Producer loops or how can I increase the speed of my existing producer?
How should I handle the different speed of the channels?
Enclosed screenshots from my VI.
Thanks,
Thomas
Attachments:
producer.jpg ‏66 KB
receive.jpg ‏38 KB

Andy,
thanks for your support!
Goal of my project is to measure both CAN channels. Between these channels is a real electronic control unit (ecu) which is able to route CAN messages between the channels. My VI has to check weather the routing works fine or not.
Each message has an identifier and I kow which messages are routed. That means I have to measure both channels, look for routed messages and compare the data and the timestamp of the messages. I try that in my consumer loop. The data are stored in several 2d arrays. And I have to look for specific data in these arrays. I think the loops over the arrays are to slow. but I have no other chance - I have to buffer the messages somehow and then to compare by their timestamps to find the right order. But that's very difficult because the order of the messages in my producer queue is not ordered by the timestamp...
If you have any idea how to solve the problem better, let me know - I would be happy!
Thanks,
Thomas

How to increase the speed on my mini mac

What is the best way to increase the speed for my mini mac?
10.4.11
1.33 ghz
512 MB drsd ram

The max RAM for your Mac Mini http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_g4_1.33.html is 1GB. Increasing to the max RAM will help.
How much free space do you have on your hard drive. An almost full HD can cause slowness.
Mac OS X: System maintenance
http://discussions.apple.com/thread.jspa?messageID=607640
Mac Tune-up: 34 Software Speedups
http://www.macworld.com/article/49489/2006/02/softwarespeed.html
52 Ways to Speed Up OS X
http://www.imafish.co.uk/articles/post/articles/130/52-ways-to-speed-up os-x/
Tuning Mac OS X Performance
http://www.thexlab.com/faqs/performance.html
11 Ways to Optimize Your Mac's Performance
http://lowendmac.com/eubanks/07/0312.html
The Top 7 Free Utilities To Maintain A Mac.
http://mac360.com/index.php/mac360/comments/the_top_7_free_utilities_to_maintain _a_mac/
 Cheers, Tom

M30: Connect only with 42.6K - How to increase the speed

My M30 connect only with 42.6K speed. I try all options to increase the speed but success. If any one have the solution, please send me email at [email protected]
I try the other series on my telephone line and those connect at 52 to 54K speed. Even Desktop connect at 54K.

Hello
Please go to the device manager and choose the modem. Then right click and properties.
There you will find a many tabs. Please check if the option Maximum port speed in the Modem tab is set to highest value.
Furthermore you can check in the Advanced tab the button Advanced Port settings The controller should be also set to the high (max).
Please check these possibilities.
Bye

How to control the speed of video file in Window media player

Hello
I had worked on LabView for a week & i am new to LabView.i am working on Labview 8.5 and i want to control the speed of video file in windows media player on front panel.
Is it possible?and if yes send me some examples for this & steps to do this.
Thank You.

few minutes back only i posted a reply to similar question here

How to increase the speed of an animation without losing frames?

Forgive me, I know I'm probably being stupid here.
I have an animation that's 11 frames long. I've set the delay between frames to 0sec but it still plays too slowly.
What do I need to do to make it play it quicker? It's an animation of someone blinking. I want to preserve the detail/smoothness of the blinking action so don't want to remove any frames.

Rather than doing an Animated GIF, you might consider a different workflow, where you will have complete control.
For what you describe, I would Export each Image as a PSD, or TIFF, and then Import those into an NLE (Non Linear Editor), like Premiere Pro, or Premiere Elements. For ultimate detail, you would set up an HD Project, at a common Frame Size, say 1920 x 1080, and Scale your Images to match that. You can set the Duration of the Still Images from 1 Frame to virtually infinity. In the NLE program, you can adjust the Speed of your AV file (combined Stills) to suit. You can also turn ON/OFF Frame Blend to smooth things out.
From that Project, you can Export to any number of AV formats. Say if you wish to embed into a Web page, then Flash would be a good choice.
Just a thought and good luck,
Hunt

How to increase the size of Redo log files?

Hi All,
I have 10g R2 RAC on RHEL. As of now, i have 3 redo log files of 50MB size. i have used redo log size advisor by setting fast_start_mttr_target=1800 to check the optimal size of the redologs, it is showing 400MB. Now, i want to increase the size of redo log files. how to increase it?
If we are supposed to do it on production, how to do?
I found the following in one of the article....
"The size of the redo log files can influence performance, because the behavior of the database writer and archiver processes depend on the redo log sizes. Generally, larger redo log files provide better performance, however it must balanced out with the expected recovery time.Undersized log files increase checkpoint activity and increase CPU usage."
I did not understand the the point however it must balanced out with the expected recovery time in the above given paragraph.
Can anybody help me?
Thanks,
Praveen.

You dont have to shutdown the database before dropping redo log group but make sure you have atleast two other redo log groups. Also note that you cannot drop active redo log group.
Here is nice link,
http://www.idevelopment.info/data/Oracle/DBA_tips/Database_Administration/DBA_34.shtml
And make sure you test this in test database first. Production should be touched only after you are really comfortable with this procedure.

How to draw the circle diagram of induction motor using labview

hi
i am trying to model the electrical machines using labview..
i want to know that is it possible to draw the circle diagram of induction motor using labview..........
if its possible then please suggest me the possible ways.
thanks

There may be better ways, but the method I used was to convert amplitude & angle to rectangular coords, then create an XY plot from (0,0) to those coords. (Or 1 plot for Voltage, 1 for Current, etc.) I would then just keep updating this plot and feeding it to the graph in a loop. The result was a slightly choppy looking but useable animation of the phase vectors.
-Kevin P.

How to increase the speed f AQJMS

I'm trying to enqueue data into AQJMS, but after I insert a record into a table, it took 4 mins before the data is shown in the Grid in Enterprise Link. How can I reduce the time consuming, make it more real time?

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

How to Increase the Speed of Podcasts

It can be done but I forget how nor can I figure it our any more. How do you increase the spead of podcasts?

I don't think you can do that on an iPod Classic.

How to increase the speed of video (avi file) using labview

Similar Messages

Maybe you are looking for