How to insert date into database table
Hi,
i used date navigator in htmlb. i want toupdate date into the database table ystudetn_inf. and also please tell me how to insert that date into table.give me small example in stepby step.
Hi,
I am sure you have used htmlb:dateNavigator as follows
<htmlb:dateNavigator id = "myDateNavigator"
monthsPerRow = "1"
onNavigate = "myOnNavigate"
onDayClick = "myOnDayClick"
onWeekClick = "myOnWeekClick"
onMonthClick = "myOnMonthClick">
</htmlb:dateNavigator>
Trap the onDayClick event in oninputprocessing
date_event ?= cl_htmlb_manager=>get_data(
request = runtime->server->request
name = 'inputField'
id = 'mydate' ).
date = datenavigator_event->day.
and use date value to update your table.
If found helpfull rewards points.
Regards,
Albert
Similar Messages
-
Its very urgent:how to insert data into database tables
Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PMHi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap -
How to insert data into database table from a servlet? Help please.
From a servlet I want to insert a message with some servlet parameters into an oracle database table by writing 'insert into tablename'. How shall I write the sql statement?
simple suppose u wanned to insert user name and password into table user_info then this is a simple example .....
Best Regds
bondzoro
[email protected]
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class tester extends HttpServlet {
Connection con = null;
public void init(ServletConfig sc){
super.int(sc);
Class.forName("oracle.jdbc.driver.OracleDriver");
public void service(HttpServletRequest req,HttpServletResponse res) throws ServletException,IOE
try {
con=DriverManager.getConnection("jdbc:oracle:thin:@database_URL:1521:ORA8","username","pa
String user = req.getParameter("username");
String pass = req.getParameter("pass");
PreparedStatement pst = con.prepareStatement("insert into user_info values(?,?)");
pst.setString(1,user);
pst.setString(2,pass);
pst.executeQuery();
pst.close();
con.close();
}catch(Exception _e){
_e.printStackTrace(System.err);
~ -
How to insert data in database table
Hi experts,
How to insert data into database table using internal table from function module.Hi,
As per my understanding are you looking for the complete API feature of data insertion into the database using the Locking Mechanism? If yes, then you need to create a Lock Object using the Primary keys of the Primary Table and Secondary Tables. You need to call the lock object first and then you need to make the entry into the table. This principle is based on 'All or None Concept'.
For the insert Statement Key word you can have a look at the following link:
http://help.sap.com/abapdocu/en/ABAPINSERT_SOURCE.htm
Hope this helps.
Thanks,
Samantak. -
How to insert data into two tables linke with foreign key..
I have two tables
1)EMP(emp_ID,username,emp_type_code)
emp_ID is primary key, emp_type_code is a foreign key references emptype table.
2)emptype(emp_type_code,emp_type_descripton)
emp_type_code is primary key
Could anyone help me ..how to insert data into EMP table. How to insert data into two tables linke with foreign key..CREATE TABLE "CATDB"."DWDIMUSER"
"USER_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_ID" NUMBER(10,0),
"FULLNAME" VARCHAR2(20 BYTE),
"FNAME" VARCHAR2(20 BYTE),
"LNAME" VARCHAR2(20 BYTE),
"USER_SUBTYPE" VARCHAR2(20 BYTE),
CONSTRAINT "DIMUSER_PK" PRIMARY KEY ("USER_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE,
CONSTRAINT "DIMUSER_DIMSPECIALTY_FK" FOREIGN KEY ("SPECIALTY_ID") REFERENCES "CATDB"."DWDIMSPECIALTY" ("SPECIALTY_ID") DISABLE
CREATE TABLE "CATDB"."DIMSPECIALTY"
"SPECIALTY_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_NAME" VARCHAR2(100 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("SPECIALTY_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
INSERT INTO DIMUSER (FullName, FNAME, LNAME, USER_TYPE, USER_SUBTYPE)
SELECT DISTINCT
Engineer AS FullName,
regexp_substr(Engineer , '[^,| ]+', 1, 1) as FName,
regexp_substr(Engineer , '[^,| ]+', 1, 2) as LName ,
'Engineer'
FROM EMPLOYEELOOKUP;
INSERT INTO DIMSPECIALTY (SPECIALTY_NAME)
SELECT DISTINCT SPECIALITY
FROM EMPLOYEELOOKUP;
COMMIT;
CREATE TABLE employeelookup ...IS A TABLE THAT HAS ALL THE DATA NEDED TO BE FILLED IN BOTHE TABLES...
CREATE TABLE "CATDB"."EMPLOYEELOOKUP"
"EMPLOYEELOOKUP_ID" NUMBER(10,0) NOT NULL ENABLE,
"ENGINEER" VARCHAR2(25 BYTE),
"SPECIALTY" VARCHAR2(20 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("EMPLOYEELOOKUP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
DATA IN EMPLOYEELOOKUP
Engineer, Specialty,
John, Dow, Electronis,
Dow, Jons, Technician
Stan Smithers Sales
Mark, Richards Marketing
Jenny, Lane Marketing
John, Lee Sales
I NEED TO LOAD THE FOREIGN KEY IN DIMUSER FROM THE DIMSPECIALTY TABLE?
BY USING THE LOOKUP TABLE TO MARCH THE NAMES UNDER THE Engineer COLUMN, SPECIALTY COLUMNE DISTICTIVLY BY JOINING THE DIMSPECILTY TO RISTIVE THE PRIMARY KEY AND FILL IT IN THE DIMUSER TABLE AS A FOREIGNE KEY. -
How to insert data into a table from an xml document
using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null -
How to insert data into two tables at once using XSJS
Hello Experts,
My requirement is to insert data into two tables at once. I have a XS JS app and want to update these tables via xsjs. How can I do this ?
Is there any mechanism like sql 'transactions' also in Hana ? If yes, how can I call it via xsjs ? If not, what are the ways to populate two different tables at once.
Please advice. Any help is really appreciated.
Thanks !There is nothing special about inserting into two tables at once in XSJS. Just issue two separate SQL Statements. Don't execute the COMMIT until after both commands. That way they are all one transaction.
-
How to insert date into a table by selecting form sysdate
Hi
My Table format is like this
SQL>desc log;
Name Null? Type
EMP_ID VARCHAR2(30)
LOGIN DATE
LOGOUT DATE
now when ever an employee logs in i w'd like to insert date into the table.
i put up the following query
SQL> insert into log(emp_id,login)
2 values
3 ('Ed_01',
4 select
5 sysdate
6 from dual
7 );
select
ERROR at line 4:
ORA-00936: missing expression
I got the above error how can i rectify that plz suggest me very urgently as i have to submit my project very early to my boss.try this :
insert into log(emp_id,login) values ('Ed_01', sysdate); -
I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916 -
How to insert Date into Database from workbench.
Hi
I have requirement where I need to insert the currentDate and Time to the database. Here I am using as
At SQL Statement Info Editor ,have like these :
Type value
Date parse-dateTime(current-dateTime())
At DB I have Datatype as DateTime( Using MySQL). Here i am getting error like :
Caused by: com.adobe.idp.dsc.jdbc.exception.JDBCIllegalParameterException: Type mismatch is found when preparing SQL statement. Expecting type 'date', but got type 'String'.
Could any one tell me where I can find detailed log say hibernate type... where exatly we are getting error.(Expect jboss's server log).
Please tell how to insert the date into the DB ASAP.
Thanks
PraveenThanks for all replies.
Eventually I got the solution the post
From the Form (Using DatePicker) , we will get the DateTime datatype to the Workbench. All we need to do is assign the same to DateTime variable in the workbench and inserting the data to the DB.
It works.
Thanks
Praveen. -
How to insert data into database. Please help me(Struggling Very much)
Hi i am having a jsp page which contains some textfields and one button. I have a database table and i have added to my page. The first column of Database table is ID which is of NUMERIC type and it has been set into primary key. And rest of fields are CHAR type. I am using SQL Server 2000. I have to enter the data into text fields and when i submit the add button it must add to the database table. But i am getting error like
Exception Details: java.lang.IllegalArgumentException SRNI.TABLE1.NAME
Please i am trying this one from two months. but it is not getting. I have tried alot by studying all tutorials in Java Studio Creator. I have posted many times but i have followed everyones suggestion. Please give me some instances of writing code to the corresponding requirements i have mentioned above.Please explain step by step including simple one also.
Thanking You in Advance.Hi Srinivasan,
Please check out the Database projects available at:
http://blogs.sun.com/sakthi/entry/flavors_of_crud_tutorial_projects
These have been exercised using this tutorial against different databases:
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/inserts_updates_deletes.html
HTH,
Sakthi -
How to insert data into custom database table from an hcsf
i want to insert data into database table that i have created from an hcsf.
example :
say i have created a table in oracle database and i hav created a hcsf file.now i want that when somebody fills in that hcsf and click submit ,i want that entries should be updated in my database table.
plzzz reply ASAP(it's urgent)you'll need a bit of Java code... extract the data during a check-in filter, and insert it into the database.
check out the "DataAccess" component in the HowToComponents for query-running examples, and the "DynamicPrefix" component for a check-in filter example.
I have older copies here:
http://bezzotech.com/library -
Insert data into oracle table from XML file
I need to insert data into oracle table from XML file
If anybody handled this type of scenario, Please let me know how to insert data into oracle table from XML file
Thanks in advanceThe XML DB forum provides the best support for XML topics related to Oracle.
Here's the FAQ on that forum:
XML DB FAQ
where there are plenty of examples of shredding XML into Oracle tables and such like. ;) -
How do I run a database procedure that inserts data into a table from withi
How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
ColinHi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian -
Insert data into fact table from source database tables
here i try to insert data into fact table from source database tables here is the query
ALTER procedure [dbo].[facttable]
as
insert into [pp dw].dbo.Dimfact(Prod_ID,Production_ID,Material_ID,Equip_ID,WC_ID,Recipe_ID,Quantity,costprice)
select Products.[Product ID],[Production ID],Materials.[Material ID],[Equipment ID],[Work Centre ID],[Recipy ID],Quantity,[cost price]
from
[PRODUCTION PLANNING 2].dbo.[Products],
[PRODUCTION PLANNING 2].dbo.[Production Detail],
[PRODUCTION PLANNING 2].dbo.[Material category],
[PRODUCTION PLANNING 2].dbo.[Materials],
[PRODUCTION PLANNING 2].dbo.[Equipment],
[PRODUCTION PLANNING 2].dbo.[Working Centre] ,
[PRODUCTION PLANNING 2].dbo.[Recipies]
where
Products.[Product ID] in (13, 14, 15, 16, 17) and
[Production Detail].[Production ID] in (1, 2, 3) and
[Materials].[Material ID] in (1, 2, 3, 4, 5) and
[Equipment].[Equipment ID] in (1, 2, 3, 4) and
[Working Centre].[Work Centre ID] in (1, 2, 3) and
[Recipies].[Recipy ID] in (1, 2, 3) and
[Material category].[Category ID] in (8, 9, 10, 11, 12, 13)
and when i execute query it shows me error
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dimfact_Dimproduct". The conflict occurred in database "pp dw", table "dbo.Dimproduct", column 'Prod_ID'.
ERD IS
HOW TO SOLVE THIS PROBLEM?I cant see any join conditions in your query posted. Whats the purpose of the query above. It will just bring you a cartesian product (cross join) of tables involved subjected to filters. Are you sure this is the correct query?
The error you're getting may be because you've not yet populated DimProduct or may be because of logic you used in popultaing DimProduct causing it to miss some records which is what query is referring to in above case.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page
Maybe you are looking for
-
I only want to close one tab at a time
-
My laptop has a webcam but no built in webcam app.
I have to use a crappy software to take pictures. How do I fix this? I need a webcam app that has a timer and I was hoping that there'd a be built in webcam app on my laptop that would do the trick. But there's no app in the first place. Help. This q
-
Why is VI not executable using Labview 7.1 Run-Time Engine?
Hi, In our Teststand sequence, we have a Labview Action step which is returning an error: "The VI is not executable", along with the error code: -18002. This error occurs on a Production PC using the L.V. 7.1 Run-Time Engine. I'm aware of Mass Compil
-
I imported, enhanced and titled a batch of photos. I attempted to upload them to a website. I brought up my photos from the Finder but ONLY the original, unenhanced, untitled photos exist (besides the thumbnails). In iPhoto, the photos in question ar
-
My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite
My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite. When printing one page of something, ten pages or so of machine language will print out. It is on my home network and the IP address is correct. Thanks for any