How to insert multiple entries in table control
Hi All,
I want to insert multiple entries in table control in BDC program.Can any body help in this regard.
Thanks,
Satish.
Hi,
Go through the following 2 example programs:
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
ABAP Name : ZMM_PR_UPLOAD_MAT
Description : PR Upload BDC Program(With Material)
Created by : Anji Reddy V
Created on : 04/11/2004
Description : This Program is used to Upload the Purchase
Requisition data Using the Transaction ME51N.
Modification Log:
Date Programmer Correction Description
04/11/2004 Anji Reddy Initial
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
reward for useful answers.
Regards,
Anji
Similar Messages
-
To delete multiple entries in table control in module pool
Hi,
Please help me out to know , <b>how to delete multiple entries from table control</b> when multiple lines in table control are selected.
Regards,
Irfan Hussainhai,
you can do it inthis way.
in the PAI event.
loop at <table control name>
module del_itab.
endloop.
in the nodule,write the folowing code.
if <tablecontrol>-fieldname = 'X'.
delete <tablecontrol-itab>
endif.
cheers -
How to execute multiple records in table control
HI.
I have a requirement that in table control user will select more than one row and when he clicks 'SAVE' it should go and sit in a custom table. how to pass more than one records.
thanks & regards.
sandeepHi Sandeep,
I understand your requirement .......
See this standard program........
<b>" DEMO_DYNPRO_TABCONT_LOOP_AT "</b>
<b>Understand how DELETE button is working,inorder to delete multiple lines....Copy this program if necessary..OK.
Simply,Replace DELETE statement with your INSERT statement to push records into your custom table....very easily you can do it.</b>
<b>Reward all helpful answers.</b><b>
Hope you problem is solved.</b>
Regards,
V.Raghavender. -
SRM-EBP: How to delete multiple entries in table BBP_DOCUMENT_TAB easier?
We are running SRM 4.0 EBP on classic scenario. I want to delete entries in table BBP_DOCUMENT_TAB easier and faster using FM BBP_DELETE_FROM_DOCUMENT_TAB. Is there a standard program that calls this FM so that inputting the entries will be faster? I see only CLEAN_REQREQ_UP but does not serve the purpose. If none, how can I develop a program to achieve this? Please help SRM Consultants.
Hi,
Please check note 535765, in it there is a special report that deletes entries from this table.
I hope this helps,
Kind Regards,
Lisa -
How to populate multiple entries to Bapi Table
Hi all,
How to populate multiple entries to Bapi Table.....
Here is the code(in component controller)
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.models.veteranpoint.Zrecr_Aplno appid = new
com.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
request.addApplicants(appid);
I want to pass the selected input field to bapi..
Please tel me where i pass the input field...
Please correct my code...
Thanks & regards
Mathi sHi,
Steps to insert multiple entries to BAPI table.
1.Create an instance for BAPI input
2.Bind the instance to the Node of the BAPI input
3.Create instance of the Structure(BAPI table) to which input has to be added.
4.Set the input values to the Structure instance.
5.Add the instance to the BAPI input.
6.Execute
From the given example,I assume Z_Recr_Apply_Point_Input is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
Step 1:
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
Step 2:
<b>wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);</b>
Steps 3 & 4:
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);</b>
Step 5:
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();</b>
Regards,
Viji Priya -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
How to insert multiple line items in fv60 using bdc.
Hi all,
How to insert multiple line items in fv60 using bdcshi
chk this
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_EBELP(30) , V_MENGE(30) , V_WERKS(30), V_EMATN(30) ,
V_PEINH(30).
DATA : FILE TYPE STRING, V_MSG(100) , V_IND(2) TYPE N , FLAG VALUE 'X'.
PARAMETERS: P_FILE(50) TYPE C DEFAULT 'C:\ME21_TEST'.
DATA : BEGIN OF ITAB OCCURS 0,
IND(02),
LIFNR_001(010),
data element: BSART
BSART_002(004),
data element: BEDAT
data element: EKORG
EKORG_004(004),
EKGRP_006(003),
data element: LPEIN
LPEIN_005(001),
data element: EMATNR
EMATN_01_007(018),
data element: EWERK
WERKS_01_008(004),
data element: EPEIN
PEINH_01_009(006),
data element: EWERK
MENGE_01_013(017),
data element: AUFEP
EBELP_014(005),
data element: AUFEP
END OF ITAB.
START-OF-SELECTION.
FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT ITAB BY IND.
START-OF-SELECTION.
LOOP AT ITAB.
REFRESH IT_MESSAGES.
<b>V_IND = V_IND + 1.</b>
<b>AT NEW IND.</b>
<b>READ TABLE ITAB INDEX SY-TABIX.</b>
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0100'.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
ITAB-LIFNR_001.
PERFORM BDC_FIELD USING 'RM06E-BSART'
ITAB-BSART_002.
*perform bdc_field using 'RM06E-BEDAT'
ITAB-BEDAT_003.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
ITAB-EKORG_004.
PERFORM BDC_FIELD USING 'RM06E-LPEIN'
ITAB-LPEIN_005.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
ITAB-EKGRP_006.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ENDAT.
<b>PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN.
PERFORM BDC_FIELD USING V_EMATN
ITAB-EMATN_01_007.
CONCATENATE 'EKPO-WERKS(' V_IND ')' INTO V_WERKS.
PERFORM BDC_FIELD USING V_WERKS
ITAB-WERKS_01_008.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING V_PEINH
ITAB-PEINH_01_009.
*CONCATENATE 'EKPO-MENGE(' V_IND ')' INTO V_MENGE.
*perform bdc_dynpro using 'SAPMM06E' '0120'.
*perform bdc_field using V_MENGE
ITAB-MENGE_01_013.
*CONCATENATE 'EKPO-EBELP(' V_IND ')' INTO V_EBELP.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING 'RM06E-EBELP'
ITAB-EBELP_014.</b>PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
AT END OF IND.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BU'.
ENDAT.
CALL TRANSACTION 'ME21' USING IT_BDCDATA MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_MESSAGES.
LOOP AT IT_MESSAGES WHERE MSGTYP = 'E' OR MSGTYP = 'A'.
IF FLAG = 'X'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'GAMY_FAILURE'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR FLAG.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'ME21'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGES-MSGID
LANG = 'EN'
NO = IT_MESSAGES-MSGNR
V1 = IT_MESSAGES-MSGV1
V2 = IT_MESSAGES-MSGV2
V3 = IT_MESSAGES-MSGV3
V4 = IT_MESSAGES-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
WRITE : / V_MSG.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
ENDLOOP.
IF FLAG NE 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA. -
Transfer entries in Table Control
Plz tell me how can i transfter entries made in table control into an inertnal table.
so that I could save all entries of table control into database.
Regards....hi,
The cells in table control should have the internal table field name.
then use,
modify wi_cust1 index tb-current_line.
if sy-subrc = 0.
modify zcust_master2 from table wi_cust1.
where,
wi_cust1 is the internal table and zcust_master2 is the database table.
hope this helps,
Regards,
Arunsri -
How to insert data in database table
Hi experts,
How to insert data into database table using internal table from function module.Hi,
As per my understanding are you looking for the complete API feature of data insertion into the database using the Locking Mechanism? If yes, then you need to create a Lock Object using the Primary keys of the Primary Table and Secondary Tables. You need to call the lock object first and then you need to make the entry into the table. This principle is based on 'All or None Concept'.
For the insert Statement Key word you can have a look at the following link:
http://help.sap.com/abapdocu/en/ABAPINSERT_SOURCE.htm
Hope this helps.
Thanks,
Samantak. -
I cannot delete multiple entries from table
Hi
i am trying to delete multiple entries from table while keeping some data.
for example I have the following table
Plant Item
US101 777
US101 888
US101 999
US101 666
I want to keep the rows where the item is 777 and 888 for plant US101 and keep delete the rest data
I wrote the following code
Delete source_package where Plant = 'US101' and Item NE '777' or '888'.
but all the rows get deleted.
I tried deleting single row and it worked.
Delete source_package where Plant = 'US101' and Item NE '777' .
How can I delete multiple rows.
thanksHi Bhat Vaidya,
Plz refer the following code.. IT will solve ur problem..
REPORT ZSDN_TEST.
data: BEGIN OF it_data OCCURS 10,
plant(4),
item_num TYPE string,
END OF it_data.
data: str type string.
data: it_final like it_data OCCURS 10 WITH HEADER LINE.
it_data-plant = 'US01'. it_Data-item_num = 777. append it_data.
it_data-plant = 'US01'. it_Data-item_num = 888. append it_data.
it_data-plant = 'US01'. it_Data-item_num = 999. append it_data.
it_data-plant = 'US01'. it_Data-item_num = 666. append it_data.
delete it_data where plant = 'US01' and item_num ne 777 and item_num ne 888.
LOOP AT it_data.
write:it_data-plant,it_data-item_num.
skip.
ENDLOOP.
Regards,
Apoorv -
Reg:How to delete the column in table control also from database table.
Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab. -
How to allow multiple domains under Access-Control-Allow-Origin
Hi,
We have a domain where will get CORS request from another domain hosted on seperate DC. We can't set
Access-Control-Allow-Origin as * due to security concerns & IIS can't take more than 1 value at a time. Kindly suggest how to pass multiple httpheader for
Access-Control-Allow-Origin.
Regards,
DhirajHello Dhiraj,
This is not the suitable forum for your question, you may post in
IIS forums for more help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to Display multiple records in Table in VC without using BAPI.
Hi All,
I am working on Visual composer (NW2004s SP10). I am trying to display Poitems from BAPI_PO_GETDETAIL. I am creating my front end using VC. I have created one form and one Table where I want to display POItems. I am writing my logic of retrieving data from BAPI in CAF.I am connecting them in Guided procedures.When I run my process in Guided Procedures I am getting single row displayed in table. Can Anyone help me how to display multiple rows in table.
Regards,
SheetalHi Sheetal,
if the BAPI returns a table, then you get multiple rows. From which system is the BAPI, so that I can check the BAPI to give you further information.
Best Regards,
marcel -
How to add a column in table control
Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards -
How to insert images in a table
Hi all,
Iam working On Oracle10g
can any one explain how to insert images in a table.
Any help will be much appreciated!!
Thanks.Hi,
Try like this
step1: Create a folder & place the image in it.
for eg: place the image 'Sunset.jpg' in 'IMAGEFILE' folder of D drive
Step2: Create a Directory in sql*plus as
CREATE DIRECTORY IMAGEDIR AS 'D:\IMAGEFILE';
Step3: Grant previlage to user
GRANT READ ON DIRECTORY IMAGEDIR TO PUBLIC;
Step4: Create the table in which you want to insert the image
create table loadalbum
(name varchar2(100),
image blob)
Step5: Create the procedure as
declare
l_blob blob;
l_bfile bfile;
begin
insert into loadalbum values ( 'Sunset', EMPTY_BLOB() )
returning image into l_blob;
l_bfile := bfilename( 'IMAGEDIR', 'Sunset.jpg');
dbms_lob.fileopen( l_bfile );
dbms_lob.loadfromfile( l_blob, l_bfile, dbms_lob.getlength( l_bfile ) );
dbms_lob.fileclose( l_bfile );
end;
Now you can know whether the image is inserted or not by
SELECT COUNT(*) FROM LOADALBUM;
COUNT(*)
1
which means image is inserted.
Hope this may help you.
Maybe you are looking for
-
Error 1335 during installation of NI LABVIEW Run Time Engine 2009
Hi, While installing Labview 2009, I am getting the following error. Error 1335 : The cabinet file 'mib100.cab' required for installation is corrupt and cannot be used. This could indicate a network error, error reading from CD -ROM, or a problem wit
-
Can you combine multiple itunes accounts into a single one?
I set up separate itunes accounts for my (2) sons (8 & 10) because one had an iPod and the other had an iTouch. They just got an iPad for X-mas (that they'll share) ... I want to set up the iCloud and create a "joint" account. Is it possible to com
-
Trouble importing favorites from IE to Mozilla
I tried to import my favorites from IE to Mozilla by follwoing the instructions and it did say that they were successfully imported, but when I go to the internet explorer folder under the "bookmarks" tab, it it empty. Please help. thanks. mike
-
Charts in Report Designer - choosing columns and rows for categories
Hi, I am trying to create a pie chart in report designer from a data provider which has 4 rows and 4 columns. As a default the chart created is using the 1st row for data and the four columns as categories.I want the pie chart to use the first colum
-
How to bring a website into Adobe muse for editing
How to bring a website into Adobe muse for editing?