How to insert one document into another in microsoft word?

I would like to set up a word document such that the document has embedded in it another document shrunk down a bit to make room for additional comments and information which I will add on the side. I've been looking to see if word 2007 has this feature
but have had difficulty finding it. Is it possible to take an entire document and insert it as a resizeable object into another?
Some of my research suggests that I might be able to accomplish something of this nature with publisher, and while several people in my office do not have publisher and we'd prefer if it were doable in word, instructions for publisher would be appreciated
as well if Word 2007 cannot do this.

Hi,
Thank you for using 
Word IT Pro Discussions
forum. 
From your description, I understand that 
you would like to know to how to add a Word document into another Word document in Word 2007, and you can make some comments besides the embedded Word documents.
If there is any misunderstanding, please feel free to let me know.
 Thank you for your inquiring.
To insert a Word document to another Word document in Word 2007, follow the steps below:
=========
1.      
In the Word document, click the
Insert tab.
2.      
Click the
Object in the Text group.
3.      
Click
object. Then click the Create from file tab.
4.      
Click the
Browse button to select the Word document. Also, check the checkboxes before:
Link to file and Display as icon.
5.      
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang

Similar Messages

  • How to include one view into another view

    Hi SDN's,
                   Could any please tell me,How to include one view into another view.
    In my requirment.I want to create a 'Z' view for an interface .In that  view i have to take,
    1) Ship-to-email adrr by
                              LIKP-KUNNR -> KNA1-ADRNR
                              KNA1-ADRNR -> ADR6-ADDRESNUMBER.
    2) E-mail addr of person who created the document.i.e
        LIKP-ERNAM -> USR21-BNAME.
        USR21-ADDRESNUMBER ->  ADR6-ADDRESNUMBER 
        USR21-PERSNUMBER -> ADR6-PERSNUMBER.
       In both the case we have to pass ADDRESSNUMBER to ADR6 table.
    If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
    So i created two which fetches only the email addr of  person who created the document.and another view fetches Ship-to-email addr.
    Now i want to include the second view into first view . Is it possible?or please
    tell me someother way to get these email addresses in a single view.

    hi
    as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
    regards,
    shamim

  • Is it possible to insert a document into another?

    I would like to insert a document into another document without cutting and pasting. That is, to "insert" it into the present document. I have been unable to find that option. Is it possible?

    It would seem a logical function, though Pages is in essence a $30.00 program so it's not going to have all the features one might wish. You can submit feedback to Apple on the issue here, though:
    http://www.apple.com/feedback/pages.html
    Regards.

  • How do I insert one file into another with track changes intact?

    I gather that Pages does not have a way to insert a file into a document in the way that Word has insert file. So all we can do is copy an entire document and then paste it into the second document. But when I do that I lose the track changes, except for the odd comment. What is the way around this?

    I'm assuming you're wanting to insert the contents of one Pages document into another. I don't have a need to use tracking, so I'm not sure if this applies but I think it should.
    You can insert sections from one Pages document into another. Open your files & show thumbnails. Sections have a yellow border around all of the pages in that section. Now click on the page in the thumbnail pane & copy. If the file is more than one page & you only want one, you'll need to insert a section break to separate the pages. Then go to your other file, click in the thumbnail pane & paste. If you want to insert the other content into the middle of a section in the receiving document, you will need to insert section breaks at the point you want to insert. The whole copied page will be pasted in. Repeat with another section. Styles will copy over with the sections but headers & footers will not.

  • How to call one  JSFF into another JSFF

    Hi,
    I am very new to ADf. Could you please tell me how to call one JSFF inside another JSFF. We have a common pop-up written in one JSFF. Is there any best approach to get this pop-up into other JSFF.
    Thanks in Advance.
    Regards
    Narasimha

    If you want to resue the jsff code, make use of bounded task flow with page fragment and then use it as a region.
    For more details you can refer: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/taskflows_regions.htm
    One more:
    http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_57/jdtut_11r2_57.html

  • How to copy one schema into another

    I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
    I have a dmp file of source-schema (created daily with expdp by our backup schedule).
    Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
    The dmp file was created with:
    expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    Create the copy on dest-schema with:
    impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    (dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
    If this approach is not feasible, kindly suggest me an alternative.
    Thank you.
    Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)

    Thank you both. Dean, I've made a note of your proposed command. May use it next time.
    In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
    First I ran these command logged in as SYS
    GRANT Import Full Database TO dest-schema;
    GRANT Create Any Directory TO dest-schema;
    GRANT Unlimited Tablespace TO dest-schema;
    impdp
    dest-schema/pwd
    DIRECTORY=dmpdir
    DUMPFILE=myproject.dmp
    REMAP_SCHEMA=source-schema:dest-schema
    TABLE_EXISTS_ACTION=REPLACE
    LOGFILE=implog.log
    There were some errors though. The import process complained about constraints referencing non-existent primary keys.
    It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
    - are not part of the DUMP file
    or
    - are in the DUMP file but skipped during import
    Don't know if this is a bug or by design behavior.

  • How to merge one library into another library?

    In iPhoto  9.6, is it possible to merge one library into another library? Or otherwise, import individual pictures, from one library into the other library? All of this happening on the same computer.I understand that this feature was covered by Aperture but that this is no longer supported under Yasemite?

    No
    The current version of Aperture can merge libraries (I have no idea where you got the incorrect information that it can not)
    The paid version of iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  can
    Those are you only two choices
    LN

  • How to add one DC into Another

    Hi
         I have created one DC ,now I want to use this DC into another.
         My application is like:
         I have one i/p field and beside it one button which calls another DC.So how     to   do this?
    Thanks
    Prajakta

    Hi,
    This link will solve your problem.
    WebDynpro DC -create and use
    Correct steps to use Java class in WD Java DC from another WD Java DC
    For any queries feel free to ask.
    Regards,
    Praveen

  • Inserting a document into another in Solution Manager

    Can anyone please tell me how to insert an excel spreadsheet in a word document as a link when both the documents are stored in Solution Manager.
    Thanks
    Regards
    Paramita

    Hi Paramita,
    Go to the properties of the file you want to link your word document to.
    There you will find a button "Generate Document URL (F9)". Clicking this button will buffer the URL into clipboard.
    Then you open your Word document in edit mode and paste the URL there.
    When you select this link later it will open an Internet Explorer session with the Excel document in read-mode.
    For this scenario to work you will need to activate the correct ICF service.
    Regards,
    Valdecir

  • How to insert an html  into another html

    Hi there,
    I have created a slide show with adobe bridge CS4 ,
    www.roulasorour.com/storm/index.html
    I am trying to insert it into the edit3 region of page
    www.roulasorour.com/test
    Steps I am taking to do this:
    Select all code of the slide show
    Paste it into Edit3 region
    as you can see the slide show is not showing...
    Would appreciate any help,
    sincerely

    To bring one HTML page into another HTML page, use an iframe (inline frame).
    <iframe name="IFRAME1" id='IFRAME1" width="100%" height="500" frameborder="0" allowtransparency="true"  scrolling="auto" src="folder/page.html">
    More on iframes:
    http://www.w3schools.com/tags/tag_iframe.asp
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How can I copy a page from one document into another?

    I have produced a document in two separate fils and want to merge them into one.  There are six pages in each file, I need to put them I to one file, turn into a PDF and then mail them.

    Menu > View > Page Thumbnails > click on them > Copy > Paste into Thumbnails of other document
    Peter

  • How can I automate pasting from one document into another?

    Hi, I have a need for a document that I am regularly appending a blank form from another document to. I would typically just open the second document and select and copy the block of text and then return to my working document and enter a page break and then paste in the form, over and over.  I do this so often that a way to automate this would be a huge help.  However I have had little luck working with automator myself probably because I am missing something.  But I would appreciate any ideas....Thanks

    If you took time to read carefully Pages User Guide, you would know this well described feature :
    and you would use it to build a template as I urged you to do.
    Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 14:42:20
    Please :
    Search for questions similar to your own before submitting them to the community

  • How to Include one iView into another iView

    Hi All,
    My requirement is to have 3 input fields across many iviews. on entering the values in those fields, i will invoke a Web Service Model.
    I dont want to keep these 3 fields in all iviews, rather i am planning to create one iview with 3 fields integrated with model and call this iview in many other iviews.
    How do i achieve this in wed dynpro coding. In JSP, there is a concept called "Include Jsp Page" . Is there any similar kind of functionality in WD.
    Kindly guide me .
    Reg/Venkat

    Hi,
    In the portal, create a page and place the iView having the three input fields on top. Place the second iView below. Keep differing the second iView for every page. In this way you can make the iView with 3 input fields only in the desired pages. You can use EPCF to invoke / navigate to another iView.
    Regards
    Srinivasan T

  • How to morph one photo into another?

    Hi
    Does anyone know how to do a simple photo morph in Flash CS4?  I have image 1 on keyframe 1, and image 2 on keyframe 25, but aren't sure what kind of tween is required or what to do with the tween.
    Thanks
    Shaun

    You probably won't get what you expect (image morphing is not 'simple'), but...  What you need to do is select each image on the stage and choose Modify -> Bitmap -> Trace Bitmap.  The smaller you set the value in the panel that appears, to higher the image quality when it's done.  Then you select the first and choose Insert -> Create Shape Tween.

  • How to move one array into another...

    Move the values in temp[] into scores[][].
    int temp[]= {34 ,24,78,65,45,100,90,97,56,89,78,98,74,90,98,24,45,76,89,54,12,20,22,55,66};int scores = new int[5][5];
    Thanks
    c

    well last try... :)
    some chars just dont display... when I use [ _pre_ ]
    tagg
    public static void main(String[] args)
    int temp[]= {34
    {34
    ,24,78,65,45,100,90,97,56,89,78,98,74,90,98,24,45,76,89
    54,12,20,22,55,66};
    int[][] scores = new int[5][5];
    int k = 0;
    for( int a=0; a<scores.length; a++ )
    for( int b=0; b<scores[a].length; b++ )
    scores[ a ][ b ] = temp[ k++ ];
    for( int a = 0; a<scores.length; a++ )
    for( int b = 0; b<scores[ a ].length; b++ )
    System.out.print( scores[ a ][ b ] + " ");
    In case you're wondering, this is my reply from the Advanced Topics forum decoded into a "New to Java" forum answer. ;) Also an illustration of a bug in the code brackets.

Maybe you are looking for