How to install a HP LaserJet 2035N on a LAN

Dear Sir,
My office just equip a new HP LaserJet 2035N for using on our LAN but I can not install this printer for some desktops with OP Windows XP service pack 2. When I use Ping command , no feedback althought these desktops can see this printer on Printer and Faxs. Please help me how to install a HP LaserJet 2035N on a LAN.
Thank you very much.
Best regards.
Dang Dang Quang

just use the shiped driver cd to install the network printer.
1. turn your printer power on and plugin network (LAN) wire in printer and wait for few minutes.
2. after few minutes printer will be assigned a ip address automatically.
3. you can get this ip from its test page (press and hold green button on printer panel)
4. type this ip in your internet explorer. this will opened a printer interface in your browser
5. here you can change its ip according to you network setup and and install its driver accordingly.

Similar Messages

How to install Printer HP LaserJet P2015 in Windows 7!

Dear all!
I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
Thanks a lot and I am looking forward to hearing from all.
My best regards,
LUCK
This question was solved.
View Solution.

Hi LUCK,
The printing functionality for your driver is prodided by the HP Universal Print Driver.
You may download the driver by clicking the Download button from the link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
If you may find it hard to understand any of the installation steps, you may find the full details below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Please let me know of any needed clarification.
Sincerly,
Shlomi
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install HP Color LaserJet 4600 Networked to Windows 7 (64 bits) ?

I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print.
This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card.
Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.

dan4757 wrote:
I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print.
This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card.
Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.
This should work for you. I've installed several printers using a Jet Direct this way:
Install the printer manually. Go into Devices and Printers -> Click "Add a printer" then select "add a local printer" and select the option for "Create a new port - Standard TCP/IP Port" and click next. Type the IP address of the printer into the Hostname/IP Address field then click "next" - Choose Hewlett Packard Jet Direct from the Standard drop down menu then click next. You will need to select your printer model/driver from the list and then click next.

How to install Laserjet M1217 for both wireless and network

How to install an HP Laserjet Pro M1217nfw MFP on an XP system for both network and wireless capabilities?

Hi,
Are you talking about a mixture of wired and wireless ? If yes, please check your existing hardware and use the following manual to select one connection type then post back if having any porblem during the setup:
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to install HP Laserjet P1102w without a disk?

I have a Dell Notebook running MS XP and I want to install my HP LaserJet P1102w which was previously installed on a laptop that has died.
The notebook does not have a CD drive. How can I link the printer to this computer.
HELP please.
Thank you!!

You can get the SOFTWARE free here
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80329-5&cc=us&dlc=en&lc=en&...
***WHEN DOWNLOADING CLICK SAVE not RUN!**** save to desktop to make it easier to find.
-Open the download
-Select extract
-then once it extracts install the software
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to install HP Laserjet 1020 driver for MAC 10.8.5?

How to install HP Laserjet 1020 driver for MAC 10.8.5? When I upgraded from Lion to Mountain Lion, my ability to print disappeared. Where can I get a driver that works? Thanks.

See:
Re: HP laserjet 1020 no driver for mac
Re: How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I prin e-mails using iPad 3

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I print e-mails? Thanks.

In the email you want to print, on the top right there is an arrow. Click that and an option should appear that says print. That should work. Have you already tried that?

How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

Hi guys,
I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The HP says that I can update or install this printer using the Apple Software Update anyway I don't see any update or installation on it.
Does someone know a way to download a driver or find a solution for this problem? With previous version of the OS It was possible to download a .dmg for the HP LaserJet 1022 (the driver was the same for both versions, 1020 and 1022). I tried to download and install the driver for Snow Leopard anyway I don't see any entry when I try to select a driver for my printer during the installation phase (the list contain only two very generic drivers for HP printers).
Thanks for your time!

The HP says that I can update or install this printer using theApple Software Update anyway I don't see any update or installation on it.
Updates are only available if the software has already been installed.
HP is responsible for updating their drivers for Mountain Lion compatibility. Not Apple.
Doubtful the driver for Snow Leopard will run on Mountain Lion.

How to install (not update) my HP LaserJet 1020/1022 on Mountain Lion

Hi guys,
I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The specific HP web page says that I can "update" this printer using the Apple Software Update anyway I don't see any update or installation on it.
With previous version of the OS was possible to download a .dmg for HP LaserJet 1022. I tried to download and install the driver for Snow Leopard anyway I don't see any entry when I try to select a driver for my printer during the installation phase (the list contain only two very generic drivers for HP printers).
Thanks for your time!
This question was solved.
View Solution.

Hi,
The Laserjet 1020 officialy not compatible with Mountain Lion, however you may try using the following workaround:
Install the HP Printer Drivers 2.9 package by clicking the Download button below:
http://support.apple.com/kb/DL907
After completing the installation, go to System PReferences > Print & Fax.
Click the Plus sign and select the printer.
If you still see a Generic driver selected, click the Use drop-down and then click Select Printer Software.
From the list, select the HP Laserjet 1022 and add the printer.
Now try printing using the configured print queue.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Please i need help to install the HP laserjet pro 100 color MFPm175 series

hello sir,
please i need a help how to install hp laserjet pro 100 color mfp m175 series drive.
i just bought the printer today.

Hi, which operating system are you running?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How to install hp laser jet 1018 on windows 7 x64

ok thanks
how to instal hp laserjet on computer windows 7 (64-bit)?

Have you already installed the driver/software and its not working or is this the first time you are installing?
For the first time installing...
1. Close any software programs running on your computer.
2. Click on the Download button ( LJ1018_1020_1022_Full_Solution.exe ) and save the file to your hard disk.
3. Double click on the downloaded file. This will extract all the driver files into a directory on your hard drive. The default directory these files are extracted to will have a similar name to the printer model.
4. Follow the on-screen instructions to proceed installation.
I usually have the printer disconnected from the computer and connect the usb cord when prompted by the installer.
Is this what you are looking for?
Let me know how it turns out.

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

mini graphics to vga adapter for macbook how to install in windows 7.
i have macbook with windows 7 operating system.

Can you be more specific?
What are you trying to do?

How to install a HP LaserJet 2035N on a LAN

Similar Messages

Maybe you are looking for