How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?

Hi everyone,
Requse:
Send E-mail from SAP and Recive E-mail from MS outlook2003.
My question:
How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?
For example:
Which setting need to do in R/3 server?
Which parameters need to select when install 620gui?
Which setting need to mark in MS outlook2003?
Thanks and Regards,
Colin.

Hi Colin,
For SAP MAPI read,
http://help.sap.com/saphelp_46c/helpdata/en/04/81dd4ebf2811d2897f0000e8216438/frameset.htm
For Sending mail from SAP,
http://help.sap.com/saphelp_46c/helpdata/en/55/a8b538891b11d2a25a00a0c943858e/frameset.htm
For Receiving mails read,
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/frameset.htm
<b>Which parameters need to select when install 620gui?</b>
Don't get this question...
<b>Which setting need to mark in MS outlook2003?</b>
None
Regards
Juan
Please reward with points if helpful

Similar Messages

  • How to Install and configure SAP Java GUI on windows 2003 sp1.

    Dear All,
    Can I step-by-step on how to install and configure SAP GUI for Java on windows 2003 sp1.
    Pls come with brief as I am completely new to Java and I am practicing the same on my home system first. I have latest SAP Java Pack with me.
    Regards,
    Dillu

    hi,
    Please check this link and install accordingly
    SAP GUI Family
    Regards,
    Naveen.

  • How to install and configure SAP Router

    Dear SAP Expert !
    I want to install SAP Router but i dont know the SAP router package is allocated on DVD ? what is the DVD number ?
    If you already configure SAP router please let me know how to configure ?

    Hello Thao
    what is th exact issue that are u facing.
    The account must be the administartor of the machine where u are installing SAPROUTER.Make sure you are following the correct steps as follows:
    Downloading necessary software components from SAP Service Marketplace
    1. Login to the SAP Service Marketplace with the Service Marketplace at using
    the USERID/PASSWORD which was assigned for your installation.
    2. Change the alias to www.service.sap.com/tcs to downloaded the SAP
    cryptographic software. Select the correct SAPcrptographic software
    depending on your saprouter operating system as shown below.
    3. You must have the sapcar.exe in order to extract the SAP cryptographic
    software file.
    4. With the command of u201Csapcar -xvf xxxxxxx.saru201D, /ntintel directory would be
    created and the following files would be extracted.
    (Example C:/saprouter/ntintel)
    ( when the Microsoft Windows NT Intel version is downloaded)
    C:/saprouter/ntintel/sapcrypto.dll
    C:/saprouter/ntintel/sapgenpse.exe
    C:/saprouter/ticket
    Issue of Electronic Certificate
    5. It is necessary to define the environment variable for u201CSECUDIRu201D and
    u201CSNC_LIBu201D under system account.
    Window NT environment variable setup :
    Right-clicked the icon of you computer
    Property -> details -> environment variable
    SECUDIR = < Directory name >
    Example. Variable name : SECUDIR
    Variable value
    : C:/saprouter/SNC_LIB = < Directory name >
    Example. Variable name : SNC_LIB
    Variable value : C:/saprouter/ntintel/sapcrypto.dll
    UNIX
    <path_to_libsecude>/<name_of_sapcrypto_library>
    Windows
    NT,
    <drive>:/<path_to_libsecude>/<name_of_sapcrypto_library>
    Windows
    2000
    6. Check if the environment of the user running saprouter contains the
    environment variable SNC_LIB.
    UNIX
    Printenv
    Windows NT
    System environment Variable
    7. You may now apply for a SAProuter certificate from the SAP Trust Center
    Service of SAP service marketplace
    http://service.sap.com/tcs
    > SAP Trust Center Service in Detail
    > SAProuter Certificates
    SAProuter Certificate "Apply Now"
    Click the button.
    8. Please take note of your "Distinguished Name"
    Please refer to the example above
    -SAPRouter Name
    : JPL50020586
    -Distinguished Name
    CN=JPL50020586, OU=0000036946, OU=SAProuter, O=SAP, C=DE
    Then, clicked the "Continue" button.
    9. Execute the following command in the /saprouter/ntintel
    directory in order to generate your certificate to be exchanged with SAP.
    sapgenpse get_pse -v -r certreq -p local.pse "Distinguished Name"
    Example
    sapgenpse get_pse u2013v -r certreq -p local.pse "CN=JPL50020586, OU=0000036946,
    OU=SAProuter, O=SAP, C=DE"
    Enter the PIN number. (you may enter any PIN Number you wish.)
    Please enter PIN :
    Please re-enter PIN :
    <- you must use the same PIN Number as the above.
    10. The "certreq" file is created in the /saprouter/ntintel directory.
    11. Use a notepad to open the "certreq" file and copy the displayed information
    (From the -BEGIN .to the END -)
    12.You now have to paste the above copy content into the space provided
    shown below. After you have pasted the text, click the u201CRequest certificateu201D
    button to submit your request.
    13. Once you click on the u201CRequest Certificateu201D a new screen will be displaying
    your certificate issued by SAP CA (Certification Authority).
    14. Using a notepad to copy the content (From u2013Beingu2026 to -END) and save it
    as u201Csrcertu201D into /saprouter/ntintel/srcert.
    Note :
    - Please rename srcert.txt into srcert without any extension.
    15. You then need to import this certificate into SAProuter using the following
    command.
    Please run on /saprouter/ntintel directory.
    sapgenpse import_own_cert -c srcert -p local.pse
    Please enter PIN : (same as point 9)
    16. Execute the following command in the /saprouter/ntintel directory.
    sapgenpse seclogin -p local.pse
    Please enter PIN : (same as point 9)
    This will create a file "cred_v2" in the same directory.
    17. Please check whether the certificate has been imported correctly.
    Execute this command in /saprouter/ntintel directory.
    sapgenpse get_my_name -v -n Issuer
    The result should be "CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE".
    18. When the above results are not obtained , please delete local.pse and
    cred_v2 and work again from steps 9. Please seek the assistance from your
    local SAP helpdesk or create an OSS message via component XX-SER-NET-
    OSS, if you are not able to obtain the above-mentioned result after you have
    repeated the above steps.
    Route permission table (saprouttab)
    19. The corresponding file ./saprouttab should contain at least the following
    entries.
    Example : by SNC connection, when connecting to sapserv2
    (194.39.131.34) the following entries need to be indicated by saprouttab.,
    SNC-connection to SAP
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34
    SNC-connection from SAP to local R/3-System for Support
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
    SNC-connection from SAP to local R/3-System for pcANYWHERE, if it is needed
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 5631
    SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
    SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
    Access from the local Network to SAPNet - R/3 Frontend (OSS)
    P <IP-addess of a local PC> 194.39.131.34 3299
    deny all other connections
    D * * *
    Start the SAProuter with the following command.
    Saprouter -r -S <port> -K
    "p: <Your Distingiushed Name>"
    -K tells the saprouter to start with loading the SNC library.
    Example: saprouter -r -S 3299 u2013K "p:CN=JPL50020586, OU=0000036946,
    OU=SAProuter, O=SAP, C=DE"
    Additional Note
    -You may refer to SAP note: 30289 in the SAP service marketplace for detail
    information with regards to SAProuter
    http://www.service.sap.com/note

  • How to install and configure spatial web services (sdows.ear) of Oracle 11g R1 (Version 11.1.0.6.0) on Web Logic Server  (Version 10.3.3.0)?

    I need to deploy location based service (Directory Service and Route Service). My database is in Oracle 11gR1 (Version 11.1.0.6.0). The application is deployed on Weblogic Server (Version 10.3.3.0).
    When I try to deploy the sdows.ear file, I get the error regarding class (oracle.spatial.ws.logger) definition not found.
    The examples \ tutorials that I have found are either for deployment of sdows.ear on OC4J Application Server or they correspond to Oracle 11gR2 database based sdows.ear deployment on Weblogic
    Server. As I am new in this field and inexperienced developer, I am unable to understand the causes of such error.
    May I humbly request for the solution at the earliest.
    Thanking you in anticipation.
    regards,
    GVJ

    Hi,-
    Sorry about the late reply.
    We have patches for 11.2.0.3 and 12.1.0.1 database versions.
    Please let me know if they will work for you.
    Thanks

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • How to install and configure management agents on Tru64 Cluster

    We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
    On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
    db1 (database)
    listener-db1 (listener for db1)
    node-db1 (logical hostname for db1 service)
    Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
    I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"

    You the Cluster type of configuration. It is documented in the install guide you have

  • How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

    How to install and configure ms exchange server 2007 both role hub and edge transport role in one network 

    Hi,
    Edge role is design for perimeter networks, to keep security risks minimum.  So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
    If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
    Thanks.
    MachPanel - Premium Cloud Automation Solution

  • How To Install and Configure External Drivers for the JDBC & JMS Adapters

    Hello colleagues,
    Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
    VERSION 7.10.
    BBDD ORACLE - ojdbc14.jar
    Regards.

    Hi ,
    Uisng  Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
    refer this two links,the procedure available how to deploy using JSPM.
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
    Regards,
    Raj

  • How To Install and Configure External Drivers for JDBC & JMS Adapters"

    hello ,
    where can i download  this Guide "How To Install and Configure External Drivers for JDBC & JMS Adapters"?
    thanks
    best regards
    pietro greco

    Hi Eleonore Rosenthal, 
    Could you please check the below links:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_sm32/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm
    Regards,
    S.Manu.

  • How to install and configure a boradcasting server ?

    I want to install and configure a broadcasting service.
    - Where can I find the service (software) ?
    - What kind OS is needed ?
    - is it possible to install on a PC ?
    - docs ???
    Please Help needed
    Kind regards

    HI  Michel Hellmann ,
    Please check:
    [Information Broadcasting Part 1 u2013 System Parameter Setting|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-1-system.html]
    [Information Broadcasting-Part 2 -System Settings|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-2-system.html]
    [Information Broadcasting Part 3 u2013 Scheduling the First Report|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-3.html]
    [How To... Troubleshoot Information Broadcasting (BEx Workbooks)|http://sapbwneelam.blogspot.com/2008/09/how-to-troubleshoot-information.html]
    Hope it Helps
    Srini

  • How to install and configure smtp on iis 7 on windows 7

    how to install and configure smtp on iis 7 on windows 7?
    Thanks!

    Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

  • How to install and configure Eclipse???

    Can any one guide me how to install and configure Eclipse to use it with jdk 1.5??

    how to install eclipse?
    you don't need to install eclipse just extract it to a specific path...
    install j2se 1.5 then eclipse will automatically detect it...

  • How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

    Hello,
    We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
    Can anyone please suggest me how to install and configure OSB.
    Regards,
    Anil

    Hi
    Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
    For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
    Regards,
    Mitja

  • How to install and consume GroupWise Web Service (SOAP)

    Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
    I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
    The documentation from novell site didn't help me, i didn't understant much of it.
    All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
    Can you please show me some code examples in C# with:
    1)loging in using a username and a password,
    2)retrieving contact list,
    3)retrieving appointment list,
    4)sending a mail,
    5)setting an appointment
    I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
    Please, I really need this because I am working at a project right now which involves GroupWise integration.
    I hope I haven't disturbed anyone with my simple question.
    I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
    Thank you very much!
    Signature:
    How old is the Orthodox faith?
    How old is the orthodox faith?

    Just a comment.
    The value for the version element should be "1.02"
    not "1.2".
    Preston
    >>> On Tuesday, March 01, 2011 at 8:06 AM,
    TheRomanian<[email protected]> wrote:
    > I have great news! After strong documentation yesterday and today, I've
    > just made a successfull example that actually connects to our GroupWise
    > server.
    >
    > I made it in PHP.
    >
    > I need an ASP.NET + C# application, but now is very simple to convert
    > it. I post the PHP code here for other people who in future might be
    > interested in finding out.
    >
    > So a simple PHP GroupWise Login code using "groupwise.wsdl" web
    > service:
    >
    >
    > require_once('./GWService/GroupwiseService.php');
    > require_once('FB.class.php');
    >
    > $classmap = array(
    > 'Authenication' => 'Authenication',
    > 'PlainText' => 'PlainText',
    > 'loginRequest' => 'loginRequest',
    > 'loginResponse' => 'loginResponse',
    > 'logoutRequest' => 'logoutRequest',
    > 'logoutResponse' => 'logoutResponse',
    > 'UserInfo' => 'UserInfo',
    > );
    >
    > $gwservice = new GroupwiseService(
    > "./WSDL/groupwise.wsdl",
    > array(
    > "location" => "http://11.150.40.78:8756/soap",
    > *Your GroupWise server IP:
    > and PORT*
    > "classmap" => $classmap,
    > "trace" => true)
    > );
    >
    > // do login
    > $pt = new PlainText();
    > $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
    > $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
    >
    > $lr = new loginRequest();
    > $lr‑>auth = $pt;
    > $lr‑>language = "en";
    > $lr‑>version = "1.2";
    > $lr‑>application = "phpClient";
    >
    > $lres = $gwservice‑>loginRequest($lr);
    > //print_r($lres);
    >
    >
    > I Hope this will help others.
    >
    > ‑‑
    > Signature:
    >
    > How old is the Orthodox Faith?
    > 'How old is the orthodox faith?'
    > (http://www.orthodoxphotos.com/history.shtml)

  • How to Install and Configure Workflow For PO in Oracle Apps Version R12

    Hi,
    Please do let me know how to install and configure Workflow for Purchasing in Oracle Apps R12 Version.
    I want to the standard setup of workflow configuration for the PO.
    Thanks and Regards
    Srini

    Hi Suresh
    Only the latest version of WLP which is WLP 10.3.2 has facility to integrate with Oracle UCM with Adapaters. So make sure that you do have this latest version of WLP 10.3.2. Older versions like WLP 10.3 do not have this provision.
    Also I guess when you install and configure this Oracle UCM Adapater and choose above WLP Home, I guess these modules may be added in already installed WLP folders. I checked on my side for WLP 10.3.2 and I could NOT find the modules you mentioned. So most probably you may be missing some installation/configuration stuff from UCM side.
    Thanks
    Ravi Jegga

Maybe you are looking for