How to install and use a client certificate for use with https sites on Android?

I need to be able to install a .p12 client side certificate to be sent to the admin section of my company's site to authenticate me as an employee. In FireFox for PC there is the ability to install this client certificate. In the mobile I cannot figure out how to get this to work.
I just bought an Asus Transformer Android Tablet running Honeycomb. I have tried the following method below:
http://support.mozilla.com/en-US/questions/786035
I get to the screen where I am able to present and choose a certificate but I still get the (Error code: ssl_error_handshake_failure_alert).
Now that Android is really picking up steam, there needs to be a way to install client side certificates to present to sites requesting them.
Is there another way to hack the system to allow or install a client side certificate in .p12 format?

Sorry, there's not a good way to install client certificates in Firefox 4 for Android. A bug has been filed, and any work that we do on adding this feature will be tracked here:
https://bugzilla.mozilla.org/show_bug.cgi?id=478938

Similar Messages

How to install and config multi server certificates for hardware servers within one server instance(using different IP addresses?

Hi,
I hope your questions is like this.
one instance is there, and want to install multiple server certs.
Ans:-
I don't think you can install individual certs for all of them. which is not possible, but you can install server certs for particular classes.
In one instance,you can have multiple h/w virtual servers each binded to one ip.
This is possible in iws 6.0,you can install different certs for different virtual classes.
Thanks,
Daks.

How to install and configure WebLogic 10.3 to use 64-bit JDK?

Hi,
Is there a preferred/supported way to configure WebLogic to use the 64-bit JRockit that comes with JRockit Mission Control?
I can't find any official documentation about how to configure WebLogic to use a 64-bit JDK. From other forum posts I can tell we need to use the 64-bit JRockit that is bundled with JRockit Mission Control (available at [http://www.oracle.com/technology/software/products/jrockit/index.html]) but then we are kind of stuck - the configure script which let me select a JDK for a domain doesn't seem to let me re-configure an existing domain, and I can't find anything within the admin console that would let me set the JDK to use.
I was able to rename the existing jrockit_160_05 directory to e.g. jrockit_160_05_original and then rename the jrmc directory to "jrockit_160_05", effectively taking the place of the JDK being used but this seemed like a bad way to do it. I also found via Google this page: [http://java.sodeso.nl/application-servers/bea-weblogic/how-can-i-change-the-jdk-installation-that-weblogic-uses] which basically says to modify the JAVA_HOME environment variable in the start scripts, but this seems like the same thing.
With the plethora of products and the different ways they are bundled, combined with all the documentation about everything, I thought I would find something but I keep coming up blank. Does anyone have suggestions or pointers?
Thanks,
KaJun

Make sure your environment configuration is supported here:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Then, you need to have the correct 64bit JDK installed. Sounds like you have done that.
Then download and run the generic platform installer as described here with your 64bit supported JDK:
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14142/start.htm#i1077535
Notice how the link you post has the generic installer for all the 64bit JVM rows, but the other installer for the 32bit JVMs on the 64bit OS?

How to install and migrate info to a new laptop with Win 8

I got a laptop a few days ago with Win 8.... I am totally lost. I installed FF and it shows on my desktop :)
Now I need to transfer all my data there. I created a new profile in the desktop (Win 7) in case... Then what???
I don't know where to find the info I am familiar with. I use FF 22.
Can you please help me (again!)?
I will have to do the same from an old laptop (Win XP) to the new one.
Thank you very much

Hi JenL27, the Profile Manager lets you see ALL your currently existing Firefox profiles and choose the one you want to use.
Start the profile manager again, select your original profile, and start Firefox using that one. It will be a lot easier to work with your data that way.
IMPORTANT: Do not delete any profiles without making good backups.

How to Install and apply the Diagnostic Pack for Fusion Middleware on EM

Hi
we have installed ADF Runtime along with Enterprise Manager on IBM-AIX-64-BIT-7.1 version. now, we are planning to install the Diagnostic pack for fusion middleware inorder to monitor the ADF Application deployed on weblogic 10.3.6 server from Enterprise Console. Can anybody suggest, the diagnostic pack for fusion middleware compatability version for our OS,weblogic 10.3.6.
Regards
Nagaraju Manchala

Hi Nagaraju,
The packs just represent packaged licensing and usually don't need to be installed. However, I assume you are referring to the Diagnostic Pack for Oracle Middleware. If so, the functionality is actually not part of Enterprise Manager Cloud Control. All of the WLS and FMW management features are licensed via WebLogic Management Pack EE or the appropriate FMW pack licensing such as SOA Management Pack EE for SOA Suite and OSB and Management Pack for Oracle WebCenter for WebCenter and UCM. The Diagnostic Pack for Oracle Middleware includes the standalone AD4J and JRMC diagnostic tools which can be downloaded from e-Delivery and installed separately. It is solely dedicated to diagnostics at the end of the day as opposed to monitoring.
Most prefer WLS Management Pack EE for monitoring and managing WebLogic and Oracle App Server apps along with the RUEI product, but you definitely can take advantage of AD4J and JRMC today. It should be noted that WLS Management Pack EE allows the usage of JVM diagnostics as well which is much broader in its 24/7 diagnostics and monitoring capabilities at the JVM level than the standalone AD4J component. In addition, the diagnostics is supplemented with the middleware diagnostics advisor, performance summary and composite application dashboards, diagnostic snapshots, and other functionality. In addition, WLS Management Pack EE includes all of the configuration management (config compare, compliance policies, patch tracking, etc) and lifecycle management features (domain and Java EE provisioning, patch automation). Anyways, it is probably just easier to take a look at the self-running demos for the features on OTN under EM and YouTube in the WebLogic Server or Oracle Learning channels.
Also, to your oriiginal point, you don't need to install the pack. You can discover WLS and FMW targets out of the box immediately. There are additional components you can download under the EM umbrella such as Real User Experience Insight (RUEI - monitors actual user activity on the front-end and associates it with EMCC targets) and Business Transaction Management (BTM - formerly AmberPoint, which provides payload aware business transaction monitoring). Both RUEI and BTM data integrates with EMCC via the Business Application dashboard, so you can still have a single console view of your application even though the RUEI and BTM components are installed separately.
-Glen

How to install and use a plug-in downloaded from the apple site?

how to install and use a plug-in downloaded from the apple site?

Emelie,
which plug-in do you want to install?
some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
For others you move the plug-in into to System Library or your User Library:
Your Hard disk > Library > Application Support >Aperture > Plug-Ins > Edit
or
Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
You can tell by the extension, what kind of plug-in it is.
E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
Regards
Léonie
P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
    Finder > Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
To show the System Library:
     Finder > Go > Go to Folder
then enter   / Library

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

Need help how to install and use html db

plz any body can help me i have download htmldb2.0 and want to install and use it with oracle but i do not know how to install and use it first time any body can help me in detail .
Niazi

Niazi,
Included in the 2.0 download are some very comprehensive Installation and Upgrade instructions, I would highly recommend you read those.

Formication : How to install and use it

Hi,
I need some help. I would like to install and use the Formication CGI but I don't find any documentation usable for someone who never installed any CGI
Does someone use it and can teach me how to install and use it ? Or maybe there is a documentation somewhere ?
Thanks for any help

>I thought it was something well known here.
I'd never heard of it before.
Find here the message from the Mac OS X Server Mailing list where I found it.
Hi all..
We are currently moving: from WebStar / Lasso 6.x / FMS 5.5 to
Mac OSX Server / Apache / Lasso.850 / FMSA 8.
On our WebStar webserver we used FlexMail to handle e-mails sent from a
html-form, unless we wanted databases/Lasso to get involved.
I understand FlexMail cannot be used on Apache so I have been looking around
and searched the list for any tool to do the same job.
--> What tool to send e-mails directly from web-forms
with a reasonable option to format the e-mail and
generate a response page.
Henning, most of the people that transition from WebSTAR to iTools Apache use Formication.
Formication is a Perl version of Flexmail, so it has all the features of Flexmail, plus more. It was designed by one of the developers of the original Flexmail.
When you convert from WebSTAR to Apache you can keep your script intact.
With iTools, all you need to do is to add the action:
Flexmail /cgi-bin/formication.pl
and the .flx handler,
and the scripts run unchanged.
>I also found that there is an invisible file
inside. It's a .htaccess file
I'd totally missed that, and it's likely to be the
critical link.
yes... I supposed it was something important but.... well hidden...
By default, as shipped by Apple, .htaccess files are
ignored. You need to explicity enable then in
/etc/httpd/httpd.conf
Both 'Action' and 'AddHandler' (the two directives in
the .htaccess file) require FileInfo override for the
directory. Therefore, at the very least you need to
add:
<pre class=command><Directory /path/to/your/form>
AllowOverride FileInfo
Directory></pre>
to your httpd.conf so that apache will read the
.htacess file.
Alternatively, since you have to edit httpd.conf
anyway, you might just want to add those directives
to the <Directory> block, which will save Apache
having to read the file each time the form is used.
Thanks a lot Camelot,

How to install and use icloud in imac windows 7 based

How to install and use icloud in imac windows 7 based

Have you carefully read iCloud - Learn how to set up iCloud & iCloud on a Mac?, What do I need? If you are trying to run on Windows 7 on your iMac and ignoring OS X well you're pretty much on your own. You would need to look for supports on Windows forums. If you happen to use BootCamp there is a Bootcamp forum that you can post on for BootCamp and Windows assistance.

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

How to instal and use msn?

I have an iPhone 4S. Can someone help in how to instal and use msn ?

Go to the AppStore, type MSN into the Search box, click Install next to the MSN app you want, read the instructions provided by the developer.

Apple's Alpha Transitions and Color Looks. How to Install and Use?

A few months ago I downloaded the Alpha Transitions and Color Looks from the FCS3 website.
I have just re-discovered the .dmgs on one of my hard drives but my memory is a complete blank!
I cannot remember whether I used them or installed them but seem to recollect reading some instructions somewhere!
Where should they be installed and is there any info on using them?
(Possibly in a few more months I will come across this info that I may have downloaded originally).

Digging around I found most of the answers so will add them here in case anyone else suffers from a similar memory to mine!
The Color Looks .dmg contains the instructions, the main ones being:-
To install the Color looks
1 Locate the Color Looks folder in the image you downloaded.
2 Select the individual folders in the Color Looks folder and copy them to /Users/username/Library/Application Support/Color/Effects/.
The next time you open Color, the new looks will be available in organized folders in the Color FX bin, located in the Color FX room. Opening the individual folders with categories of looks such as "Blues and Greens" and "Glows" will reveal new Color looks presets that can be applied by double-clicking.
If you like, you can move the default looks that come with Color into these folders, to keep everything organized. You can also save your own Color FX presets into these folders.
As for the Alpha transitions, there is of course just one, found in the Wipes folder, which is modified using the media that comes in the download.

How to install and configure OID using 11g R2 installers

Hi,
I need to install and configure OID, I am having installers of Oracle Identity and Access Management 11g (11.1.2.1.0).
Please let me know how to install and configure OID.
Thanks

Use the R1 IDM package. R2 is only for IAM.

Anyone know how to install the SAP/SDN SSO certificate on iOS device?

Hi all,
I tried to benefit from Single Sign-On to the various SAP and SDN site on my iPad/iPhone by using the client certificate I already use in my desktop browser, but I haven't had any success using it so far...
I emailed the certificate to my iPad, and by tapping on the attachment it got (properly?) installed, i.e. at least it is visible under Settings > General > Profile
However, when navigating to SDN and choosing 'Certificate Logon', it seems to ignore any certificate I have stored and prompting me the username/password logon page...
Has anyone been able to use SSO using the certificate? I'm quite curious to know how I could achieve this.
Best regards,
Robin van het Hof
Edited by: Robin van het Hof on Nov 22, 2010 12:58 PM

Good question!
Whenever I attempt to use the SSO sign on to the forums, my Safari browser crashes. I do have the Apple iPhone Configuration utility software which allows for companies to deploy certificates and other various items to its users. (free from the apple site) What I see when I try to apply the cert for this site is, the private key is marked "unexportable". Therefore I cannot apply that certificate to the device in its entirety.
I currently run the iPhone 4 with 4.0.1 software (I never update right away)
Regards,
Zecher

How to install and use a client certificate for use with https sites on Android?

Similar Messages

Maybe you are looking for