How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac.  Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer.  Use TextEdit, Pages, Nisus Writer, LibreOffice instead

Similar Messages

  • How to install foundation as the same DVD holds storage and foundation?

    Hi,
    I've downloaded the WS 2012 Storage & Foundation DVD image from the MSDN web site. I need to install the foundation flavour. But when I run the ISO from VirtualBox, this is the WS Storage flavour setup which is started. How can I start the foundation
    version?
    Thanks,
    romu

    Foundation is OEM only and has to be on physical servers.  It's not able (at least eula wise) to be installed virtually.
    Unfortunately TechNet isn't coming back, sorry folks :-(

  • Kids are using the WiFi all night long and not sleeping... How can I temporarily turn off the WiFi at night using the Airport Extream or Airport Utility?  I must keep the guest network up as I have a tenant in an apartment over my garage using that.

    My kids are up all night streaming Netflix and using the WiFi on their iPads and Apple TV. The next day they don't want to get up and go to school. Is there a way I can set up a separate access point for just the kids in AirPort Extreme and then turn that one off when i go to bed? Or somehow turn off the main network when I go to bed, without having to reconfigure the entire router the next day, and then simply turn it back on the next morning?  I have to keep the Guest Network up as I have a paying tenant living in an apartment over my garage that uses that network.
    In the event it's not possible with the AirPort Extreme, any other suggestions would be appreciated.
    Thanks in advance.

    You can configure the AirPort Extreme for Timed Access using the AirPort Utility. Basically what you are doing is restricting the time of a wireless device by its MAC address has access to the base station's wireless network.
    To access this feature: AirPort Utility > Select the Extreme > Edit > Network tab > Enable Access Control: Timed Access Control...

  • How do I block this msg from always popping up "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari" bc I can't download the latest software?

    How do I block this msg from always popping up "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari". I cannot download this software bc my lap top is to old. The msg literally pops up everytime I make any moves on itunes and is VERY annoying.

    I have a 2006 MacBook with an Mac OS X version 10.5.
    In that case, try downloading a Safari 5.0.5 for leopard from the following location:
    http://www.apple.com/safari/download/

  • I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

    I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
    i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

    Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
    It isn't the retail version, because that's 10.6.3.
    Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
    OK the language page.
    From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
    Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
    Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
    When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
    If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

  • I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?

    I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?  And on how many computers can I install this product? Thanks.

    What version exactly did you buy? If you bought CS6, then the license is perpetual and doesn't need any extension. If you bought CC, then you need to renew your plan every year. You can install each Adobe software on 2 machines with a single license for non-concurrent use.
    Mylenium

  • How to install and use the Gnome-DO application in oracle enterprise Linux

    My Oracle Enterprise linux is 5.3,
    I want to install and use the Gnome-Do(http://do.davebsd.com) in my box.
    Please help me regarding this.
    With Regards
    DSK

    According to Google, Gnome-Do has known issues about CPU bugs and hogs and the latest incarnation does not seem to be available for RHEL and clones. You should have more luck with Linux Desktop distributions like Fedora and Ubuntu. Or you could try to build from source using the info at: http://do.davebsd.com/wiki/Installing_Do. Good luck - I wouldn't bother.

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Itunes copied my files from my portable harddrive to my new computer harddrive on a new computer. I didn't want that, but didn't realize I did it.  How do I fix this so I can delete the songs from my computer harddrive and use the songs from the portable

    On my new computer I installed Itunes.  I wanted Itunes to use my portable harddrive for music, but instead it copied my library to the hard drive of my computer, filling it almost full.  I didn't realize this happened until I synced my iphone to Itunes.  How do I fix this?  I want to delete the library from my hard drive of my computer, and use the library from my portable hard drive.

    Hi Robin,
    Welcome to Apple Support Communities.
    You may find this article helpful with using a media library on an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Have a good day,
    Jeremy

  • OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

    OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

    Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
    Everything Rick has said is like an echo to what is happening to me.
    I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
    earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
    So i updated iTunes but now it's not even showing the device anywhere.
    In case this helps:
    OS: Windows 8.1
    iTunes version: 11.3.1.8
    Device: 5th generation iPod touch 16GB with ios 7

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

    Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

    I was searching for how to setup the 903+ and my W520 and came to this thread.
    1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
    but if you are going to go BT headset....
    2.  What I did for the 903+
    Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
    Required reboot.
    Activated the Bluetooth with FN + F5 menu.
    Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
    Ran the updated Bluetooth driver install.
    Rebooted for good measure.
    Double-clicked the Bluetooth Tray icon.
    Clicked Add A Device.
    Turned off my 903+ and continued to hold down the power to enable pairing mode.
    Showed up in devices and added it.
    Worked for audio. There are probably additional options for enabling the mic.
    Hope that helps whoever might find this thread.

  • How do I use the adjustment brush to mask and not turn my item green?

    I have shot some products for my web site.  I need completely white backgrounds. I have tried to mask the product and lighten the whites, but when I click done, my product has turned very green.
    Why?  How do you use the brush?  Also, where is the invert to make this easier on me?
    Kind of urgent, I need to get these items on my site already.
    I know the answer is simple... I just don't know what it is.
    Thanks

    Have you tried without the adjustment brush, by simply adjusting white balance from the basic tab in develop?
    Click on the eye dropper tool and then click on a neutral gray color. Use the background if it is neutral rather than white. You may need to keep selecting the eye dropper to click in a few different places for best results.
    If you decide to use the adjustment brush you can show or hide the mask. Uncheck the mask when you have finished painting; then use the sliders, starting with tint and temperature.

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • I have two Apple ID, how can I delete one and use the email address associates to the main one?

    I have two Apple ID, how can I delete one and use the email address associates to the main one?

    If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

Maybe you are looking for

  • Iphone 4 stuck in recovery mode, sleep button not working and Apple not helping

    Hey Apple Community, My iPhone 4 has been caused me a lot of frustration in the past week and after getting rejected from Apple Customer Service I did not know where else to turn. Sometime in January my iPhone 4's sleep/wake button stopped responding

  • Error Message (No disk) with Windows 8

    Hello, When I open a PDF document with Adobe Reader XI and Windows8, I Have an error Message : "There is no Disk in the Drive F:" "AcroRd32.exe - Pas de disque. Il n'y a pas de disque dans le lecteur. Insérez un disque dans le lecteur F:." But the me

  • Report in which collect statement .

    report in which collect statement  is used and also its purpose.

  • Numbers 09: Beginner with Advanced expectations

    Hello, I'm trying to develop several spreadsheets in Numbers, so I have many questions. The first is: can anybody recommend a book that has an in-depth explanation of using formulas in Numbers? I'll take anything in English or German; but prefer Germ

  • OTP of ASDM using external radius server ( Not RSA )

    Hello, Just seeing if the ASDM will support OTP using an external radius server, and not RSA.  I see there was a feature added to 8.2 that states its possible with RSA, but nothing of any other support.  Just checking to see if someone know for sure.