How to install apex (and mapviewer) company wide ?

Hi,
Until now I've developed some applications on a laptop.
I want to bring them to my company - in this stage as a "pilot" with a limited number of employees having access.
What do I need: a database, apex installed and - now is coming what I want to know - application server or http-server ?
For your information: I'm using also oracle spatial and mapviewer to present data on the map of the netherlands. Therefore I want to install spatial, and mapviewer. An pre-installed oc4j is included in that installation.
How to combine these issues ?
Thanks in advance for any reaction.
Leo

Hello Leo,
I'm not sure these issues should be combined. You are talking about 3 different Oracle products, each with its own pre-installation requirements. Regarding oracle spatial and MapViewer, you'll need to ask your DBA (or someone with the proper experience in this forum can help you).
As for ApEx, you'll need a db version 9.2.0.3 or higher, and you'll need the OHS (Oracle HTTP Server) which is part of the db companion CD, or can be downloaded from OTN.
As far as I know, Oracle MapViewer is part of the Oracle Application server, just like OC4J and OHS. In this case, you can install all the needed modules of the Application Server, and then installed ApEx. The ApEx installation guide includes information on how to configure the HTTP server, as part of the Application Server.
Hope this helps,
Arie.
.

Similar Messages

  • How to install apex 4 with Oracle Fusion Middleware Web Tier Utilities

    Hi all,
    Does any one know how to install apex 4 with Oracle Fusion Middleware Web Tier Utilities ?
    I follow the instructions http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/toc.htm but there's no directory called ORACLE_HTTPSERVER_HOME\Apache and ORACLE_HTTPSERVER_HOME/ohs/modplsql/conf/dads.conf
    I don't know where's dads.conf file to make change
    Please hellp me on this case
    Thanks & regards

    A little bit odd is an understatement. The first time I found I had to download over 1Gb of stuff to run a simple web server I practically fell over! Hopefully, the Apex Listener team will update it to have backwards compatibility with mod_plsql and we can ignore trying to install Oracle Fusion Middleware Web Tier Utilities...
    However, until then the TNS Names error generally means that there isn't a TNS alias set up for the database you have referenced in the mod_plsql dad. If you open up the dads.conf file you should see something like
    PlsqlDatabaseConnectString localhost:1521:databasealias
    If you then open a command prompt and do TNSPING databasealias you should get a response like this
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ***)))
    OK (20 msec)
    If you don't it means you need to add it in.
    Hope this helps

  • I bought 500gb iCloud storage for ł30 with my macbook air, how to install it and will i still be charged a monthly fee?

    Iibought 500gb iCloud storage for ł30 with my macbook air, how to install it and will i still be charged a monthly fee?

    sebek104 wrote:
    Iibought 500gb iCloud storage for ł30 with my macbook air, how to install it and will i still be charged a monthly fee?
    There is no 500GB iCloud storage plan, 20, 200 or 1000 are the available plans.
    What did you actually buy?

  • How to install sound and vibration toolkit 8.5

    Hello all, I have just started using labview and would like to run the "SVXMPL_Third Octave Analysis for Multiprocesor" example as an example for multithread programming, but I run into the issue that the "Sound and Vibration" toolkit is required before running the example.  I have installed the labview 8.5. I have gone through the posed link and gone through  the list of products installed in my machine (ControlPanel>Add and Remove Programs> National Instruments Software), but I couldn't find the "sound and vibration toolkit". I have tried to run the installation setup in order to add the toolkit. it looks like I have already installed all the available software. I don't know how I should install the toolkit.  I appreciate on any comments on how to install the toolkit.   I appreciate if you can help me on how to install "sound and vibration toolkit" in my machine.  

    Never mind.  I got it.

  • How to install forms and reports 6i

    I am facing a problem while installing Forms 6i. The following are the details.
    I successfully installed Oracle 9i first under F:\oracle\ora90. While installing Forms 6i, I selected the "Typical" and gave the path as "F:\oracle\ora90" and clicked on the Next Button. Immediately I got an error message as "The location specified, 'F:\oracle\ora90' is already used as an Oracle home for 'Oracle 82 Beta'. It cannot be used as an Oracle home for 'nt'".
    Could any one give the information of how to install forms and reports 6i. It ll be of great help to me.

    use F:\oracle\ora90 as your oracle-db-home
    use F:\oracle\forms6 as your forms-home
    try it
    Gerd

  • How to install videos and movies on to i touch

    i am not able to get any video files on to my i touch.it is giving a message that this format cant be played on your i pod.how to install videos and movies on to my i touch

    Videos must be in a format that iTunes and the iPod can accept. See:
    http://support.apple.com/kb/HT2729?viewlocale=en_US
    If your videos are not on the appropriate format, you'll have to convert them. Search this forum for "video convert" and you should find a number of threads about converting videos for use with an iPod.
    Regards.

  • How to install ORAESB and ORAWSM schema

    I installed oracle database 10.2. I'm not clear as to how to install ORAESB and ORAWSM schemas which are required for SOA Suite 10.1.3 installation.

    Please ignore the previous question. I've located the soa_schema directory.

  • How to install itunes and docusign in ios simulator for monodevelop

    Hi All,
    Can anyone tell me on how to install iTunes and other applications like Docusign in ios simulator that is run on Mac(monodevelop).
    Thanks

    Hi there rj 138,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/ts3299
    -Griff W. 

  • How to Install XI and EP on Single server

    Hi,
    How to install XI and EP on same server. I tried to install XI then EP . After EP installed then iam not able to access XI j2ee engine . I think some where port conflicts . I gave system number for XI : 00 and EP : 02
    Can any one help for this. Where did i made mistake.
    Thanks
    Kristene

    Hi Kristene,
    I have installed XI and EP on the same server (for test purposes) without any problems, so it should be possible. I installed them in a different order (first EP then XI), but I don't think that matters much.
    The only real difference is that I kept the system number the same.
    What do you mean exactly with not being able to access the XI j2ee engine? How did you try to access it?
    Regards,
    Martin

  • How to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?

    how to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?
    kindly recommend me any best one and tel me step by step how i will add more plugins n filters

    A Plug_in normally come with an installer or install instructions. Check the documentation for the plug-in you trying to install.  It sounds like you don't know what plug-ins you want to install.  In that case you don't need to install any.  At some point you may read about a plug-in and what it can do and feel you have a need for it.  Then you will have a reason to install a plug-in that is not installed by default.  There may also be a cost involved most worthwhile plug-ins are not free.
    Adobe Optional Plug_ins downloads are Plugins Adobe want to remove from Photoshop  and no longer install by default. Also at some point in time these will no longer install into the current Photoshop for Adobe will remove feature or interfaces the use. For example the CS5 optional plugins will install in Windows CS6 perpetual version 13.0.1.3 but not in Subscription version 13.1.2 or perpetual Mac version 13.0.6 fot its 64bit only and the Mac CS5 optional plug-in for Picture package is only a 32bit plug-in.
    You will need to keep and maintain old versions of Photoshop if Adobe remove features you use in new versions of Photoshop.

  • How to install html5 and css3 in my DW cs6 i cant download updates from adobe :/

    how to install html5 and css3 in my DW cs6 i cant download updates from adobe :/

    What do you mean you can't write HTML5 code?  Are you working within an HTML5 doc type?
    To make HTML5 your default doc type, go to Edit > Preferences > New Document.  Click on screenshots below.
    To create a new page, go to File > New > Blank page > HTML.  Select none from the 3rd column.  Select HTML5 doc type.  Hit Create button.
    Nancy O.

  • How to install oracle817 and form6i on the one machine

    How to install oracle817 and form6i on the one machine?
    Machine is P4/W2K
    Thanks a lot

    You can do this as long as you install them in different Oracle homes.

  • How to install Norwegian and Portuguese in Dictation

    How to install Norwegian and Portuguese in Dictation & Speech?

    you have options to download Norwegian and Portuguese dictation in the settings. is it not working? (Note however that you need to have internet connection to download them.)

  • How to install word and excel on a 13' Retina Display Macbook Pro without a disk drive?

    how to install word and excel on a 13' Retina Display Macbook Pro without a disk drive?

    You will either need to download the apps or use a USB SuperDrive/3rd party CDROM drive or copy your apps onto a USB thumb drive from another computer.

  • How to install C and C   in mac book pro?

    how to install C and C   in mac book pro?

    Either install Windows/Paralels/VMWare/VirtualBox on your Mac, or get an OSX compatible version to install.

Maybe you are looking for

  • 'No Airport Networks in Range' on OS 10.1 PowerBook G4 550MHz

    Hi there, I have searched these forums and checked the FAQs without any luck finding this problem. I am working on a PowerBook G4 550MHz that used to have OS 10.4.8 and when you would click on the wireless icon it would report 'No Airport Networks in

  • Icon Transparency not working?

    I have a control in xcelsius using icons with the Transparency set to 0% (completely transparent in 4.5). They were working in 4.5 but after the upgrade to 2008, they did not work anymore From the help files: xcelsius 4.5: 0 being completely transpar

  • Service for Object - GOS

    Hello all, My client is wanting to use Services for Objects (GOS) to store comments about documents, notifications, etc.  One disadvantage of GOS is there is no visible way to tell if an attachment has been made.  I have been told there was an enhanc

  • Blur doesn't work in Kwin

    Just went back to KDE and am finding that Blur doesn't seem to work in kwin - Intel driver. I seem to remember it working just fine the last time I was on KDE. I couldn't find much documentation on this in the latest kde. Has anyone had the same and

  • 10.6.7 - Boot process hangs after update

    Hi, after upgrading to 10.6.7, the boot process gets stuck somehow. Booting in verbose mode shows nothing unusual. The last message printed is: "launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist". Any ideas