How to install Boot Camp on a MacBook Pro 2011

Well I bought a new MacBook Pro and I have constantly been trying to install Boot Camp.
When I open Boot Camp it shows me the Introduction, then it asks me if I would like to install the Lastest Windows Supports Software From Apple, and if I would like to Install Windows 7. I tick both boxes and then another page opens.
It asks me if I would like to install it to a DVD or CD, or if I would like to install it to an external hard drive. Now, I have tried both of these, and they both show a page asking me how much space I would like to be Mac space, and Windows space. After I've chosen how much I would like, I click install. After about 30 seconds, a message pops up saying the installer disk could not be found, please insert the installer disk and wait a few seconds, and the click install again.
I have done this many times, and that same message pops up. Please, if any of you people out there have the solution for me it would be gratefully apreciated.
Thanks.

No, it doesn't. You have to purchase the Windows 7 installer. Windows is not included with the computer. Did you discuss the matter with someone when you bought your computer? If you did they should have told you that you would need to buy Windows 7. If you had asked while you were purchasing the computer then you could have paid for Windows at the time and had it installed for you.

Similar Messages

How to install boot camp on my macbook pro?

How to install boot camp on my macboo pro 15-inch early 20011?

Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/

Installing boot camp in a macbook pro with retina

Hello today i tried installing windows in my macbook pro with retina but it doesnt seem to install the drivers correctly.. i couldnt connect to the internet in windows so i looked and these drivers werent installed
Network Controller - Wireless
PCI Simple Communication Controller
SM Bus Controller
High Definition Audio
Apple Keyboard -> Bluetooth USB Host Controller (though the USB ports are active and operational)
Facetime HD Camera (1 of 2 not working)
Also the nvidia grafics werent installed so i couldnt play any games and the whole purpose i want to install windows is for some games and solid works...
I appriciate any help i can get
Thanks

Sounds like you did not download and then install the Windows support/driver software. It is one of the first items in the Boot Camp menu when you start Boot Camp Assistant.

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

Forgotten how to install Boot Camp

I had to reinstall Windows 7 64-bit because I needed more space for Mac OS X. After reinstallation, which went perfectly, I have forgotten how to install Boot Camp. This MBP 3.1 will not install Boot Camp from the Snow DVD because it says that 64-bit mode isn’t supported (not true). I installed several components by hand. All I remember from the old style of bulletin boards was to copy the Windows contents of the DVD on to the desktop, then to use SuperOrca to modify the ISO. I don’t, however, remember the exact details of what was supposed to be modified and how to do it. This is also supposed to prevent the error of Apple Software Update not recognizing the installation of BC 3.2 after it was done.
I can’t find the old instructions with the new format, so any help is appreciated. Peace.

Ok do this...
Insert your Windows Bootcamp Drivers Disc (aka OSX Install disc that came with your computer).
When you see the prompt from Windows Explorer, instead of clicking the "setup.exe" option scroll down and click in the Explore/view files (or something like that, don't remember.)
Look into the folder labeled as Bootcamp, then click another folder called "drivers", inside there should be another folder labeled as "Apple".
Inside, there should be a file labeled "bootcamp64.msi".
Single click the file (bootcamp64.msi) and once it's highlighted, do a right click ( to do you must do the following key combo Shift+F10)
A right click menu should appear. One of the options is labeled as "Troubleshoot Compatibility".
A dialog should appear, click on the "Start Program" option when it becomes available.
The Bootcamp Driver Wizard should now appear. Follow the prompts of Bootcamp Assistant as always.
Drivers will install automatically.
Reboot.
Welcome to Windows 7 64-bit on your now Dual-Citizen Mac...
Report back with your results...

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
any
my problem looks like this
http://www.youtube.com/watch?v=PGzgS57THMo
gta 4 steam !

If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
Just follow the steps:
Step 1: Create a text file named ‘commandline.txt’ (without the " ")
Step 2: Put the following statement inside it:
i5 users: -availablevidmem 18.0 (with the -)
i7 users: -availablevidmem 22.0 (with the -)
Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
Step 4: locate the file "GTAIV.exe" (in GTA main folder)
Right click the file and select Properties
Under the shortcut tab, you will see an area that says Target
Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
(remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
It should look something like this:
Make sure to add space between " and -"
I hope This helps, although late cx

Boot camp process. MacBook Pro cannot fid a bootable disk?

boot camp process. MacBook Pro cannot fid a bootable disk?

Welcome to the Apple Support Communities
Press Option key while your Mac is starting and choose your Windows installation disc or drive to start the installation

HT3986 i can not install windows 7 with boot camp on my macbook pro 17-inch eairly 2011

I have been trying to install windows 7 on my MacBook pro 17inch 2011, once i get to the step "burn a copy to a cd or DVD" the system runs and burns the information to the DVD but when the next step appears after I create the partition the program dose not recognize the DVD I created. when i save the copy to an external hard drive that is MS-DOS (FAT) formatted the same thing happens, the system just does not recognize the saved file. I have updated my computer and tired to check if I have any updates for the boot camp were available my current version is 4.0.1 (429). if there is anyone out there who can help, please do.

1st, you read the full guide, and you understand that you need to supply your own copy of Windows 7 (Home Premium preferably 64-bit).

How to install Boot Camp 3.1?

Hi,
I would like to install Boot Camp 3.1 which I can download from the Apple Download page. But when executing the exe file on the Windows Partition it tells me I need to install Boot Camp 3.0 first. But there is now download available for Boot Camp 3.0. The Apple Software Update Utility does not show it as well so I am stuck here.
Does anybody know how to perform this upgrade?
Thanks, KM

HI,
You might find the BootCamp User Guide helpful.
Carolyn

Mac Won't Boot after Boot Camp Windows Update - Macbook Pro Mid 2010

Hello All, and thanks in advance for any assistance you can provide.
I have a Mid 2010 Macbook Pro. Last year I upgraded the RAM, then this year I decided to upgrade the hard drive to an SSD-hybrid. Everything went perfectly smoothly with both upgrades, and I was a happy camper.
I had also installed Boot Camp with Windows 7 and everything worked perfectly. Then last night, I boot in to Windows 7 and it gives me a 'service pack update'. After installing it, I had to reboot my computer. Rebooted it and it accidently started booting OSX. No problem, I thought. I held down the power button, and booted back in to Windows. The service pack installation continued and it had me restart my computer an obscene amount of times during the installation. This is when I initially thought "this is weird".
Finally the service pack installs, and I'm able to use Windows 7 again. Then I shut down the machine and tried to boot back into OSX. No dice.
Here's how the OSX booting process goes:
First, the Apple logo appears, then what appears to be a progressive loading bar at the bottom. After a few seconds, the loading bar disappears. Then it's just at the Apple booting screen with the spinning wheel/gear and sits there indefinitiely. I let it sit there for over an hour last night and nothing happened.
Any suggestions? I tried resetting the NVRAM and the SMC.
Thanks so much,
dlevv

It looks like a hard disk problem. Press Command and R keys on boot, open Disk Utility, select Macintosh HD in the sidebar and repair your drive

How to Install Sims 3 on a MacBook Pro?

How do I install Sims 3 on my MacBook Pro?
When I put the disk in, it spins and then stops. The sims doesn't show up on my desktop. What should I do?

Finder/Preferences/General - Do you have CDs, DVDS, and iPod checked to show on desktop?

How to install software from imac to macbook pro

how to install software from imac to macbook pro

Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

How can install FCS 2 on a MacBook Pro??

I'm trying to install FCS 2 on my MacBook Pro, and the system prompted me: "powerpc is not supported".
My MacBook Pro is:
Mac OS X Lion 10.7.3 (11D50d)
2.4 GHz Intel Core i5
4 GB 1333 MHz DDR3
Somebody has a solution for this matter?
Thanx a lot!

Install "Rosetta" from a Mac OS X 10.6 DVD first.
There are already several threads here about this.

How to install Boot Camp on a MacBook Pro 2011

Similar Messages

Maybe you are looking for