How to install D2K 6i on REd Hat LInux?
How to install D2K 6i on REd Hat LInux version 7.3? I have .tar file/
Did you try looking at the documentation?
Regards,
Robin Zimmermann
Forms Product Management
Similar Messages
-
How to install ECC IDES in RED HAT linux version 5
Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus -
How to install d2k release 6i on redhat linux version 7.3?
How to install d2k release 6i on redhat linux version 7.3?
have you tried using open motif 2.1.30?
the open motif version that comes with the redhat 7.3 is 2.2 and is not compatible with 6i. Once I used open motif 2.1.30 it worked fine. The environment variable setting is very similar to any other unix version. Ensure that you are also intalling the latest patch (10) for 6i (fixed lots of problems).
regards -
How to upgrdae Oracle Cluster on Red Hat Linux 3 to Red hat Linux 4 AS U 7
We need to upgrade our Clustered (2 Nodes) Oracle Database environment on Linux environment to Red Hat 4 AS 7. The current OS version is Red Hat 3 update 6. We use EMC SAN Storage as shared storage (OCFS and Raw Devices) for our 9i and 10g databases
Question: We will install (on local disks) Red Hat 4 AS Update 7 and then install ocfs and ASMlib RPMs. Is there any risk of loosing the existing (on Red Hat 3 update 6) ocfs file systems and raw devices (from EMC SAN Storgae) after we do fresh install of OS and ocfs and ASMlib RPMs? How can we keep the shared storage data quickly available (without restore from the backup) to the system after installing Red Hat 4 AS Update 7 and mentioned RPMs?Tommy,
Below are the outputs in he current environmet with Red Hat Linux 3
# /bin/uname -a
Linux ghlx070ptlge.penske.com 2.4.21-37.0.1.ELsmp #1 SMP Wed Jan 11 18:44:17 EST 2006 i686 i686 i386 GNU/Linux
# rpm -qa | /bin/fgrep -i ocfs
ocfs-support-1.0.10-1
ocfs-2.4.21-EL-smp-1.0.14-1
ocfs-tools-debuginfo-1.0.10-1
ocfs-tools-1.0.10-1
# rpm -qa | /bin/fgrep -i oracleasm
oracleasm-2.4.21-37.0.1.ELsmp-1.0.4-1
oracleasm-support-2.0.1-1
[root@ghlx070ptlge root]#
Edited by: user8219029 on Apr 5, 2009 11:36 AM -
Order of installing Windows XP, Solaris & Red Hat Linux...
Hi all,
If I were to install Windows XP, Red Hat Linux & Solaris in intel dual core machine, in which order do I proceed to install. First Windows XP, then Solaris & Linux, I believe. Am I right. If not, please correct me.
Thanks,
...Although posted under different title and content, your most recent thread
Windows and Solaris not booting on a Windows, Solaris and Linux Machine.
is actually the duplicate of this thread.
The right order of install is Windows XP, RHEL, Solaris. Because, if the Linux is the last installed OS, the Linux version of GRUB will be installed on the MBR (Master Boot Record), and you will not be able to boot Solaris. Why? Because the Linux GRUB doesn't currently recognize Solaris VTOC (Volume Table Of Contents) and UFS (Universal Disk Format File System) formats. Only the Solaris version of GRUB works as common loader for Solaris and Linux. Since you installed Linux as the last OS (as per your duplicated thread), you can try to chainload from the Linux GRUB by modifying the grub.conf on Linux, eg:
# cat /boot/grub/grub.conf
default=2
timeout=15
color white/blue black/cyan
title Windows XP
rootnoverify (hd0,0)
chainloader +1
title Solaris 5.10
root (hd0,1)
makeactive
chainloader +1
boot
title Red Hat Enterprise Linux AS (2.6.9-78.0.1.el5)
root (hd0,2)
kernel /vmlinuz-2.6.9-78.0.1.el5 ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.9-78.0.1.el5.imgwhere
(hd0) is the first (bootable) BIOS physical disk, and GRUB boot loader is installed on its MBR
(hd0,0) is the first primary partition of the first BIOS disk - Windows XP
(hd0,1) is the second primary partition of the first BIOS disk - Solaris 5.10
(hd0,2) is the third primary partition of the first BIOS disk - RHEL-4
Modify this according to your real disk partition map if it's necessary.
If this doesn't work (at least it should work for Windows and Linux), then I suggest reinstalling all three OSs from the ground up. A year ago I successfully installed Windows Server 2003, RHEL-4.5 and Solaris 10 on single 250 GB physical disk. You can follow my procedure. Before that, boot the system with the first RHEL-4 installation CD, type "linux rescue" and press Enter. When linux console appears, delete all partitions using fdisk. Or, alternatively, type
dd if=/dev/zero of=/dev/sda bs=1024 count=2048This will erase your Master Boot Record and MBR Partition Table inside it, even much more filling out 2 MB continuous disk area with zeros. Restart the system, insert Windows installation media and start the procedure:
1. install Windows XP as the first OS. If it doesn't matter, create only one 25 GB C: drive on the entire primary partition rather than 10 GB C: and 15 GB D: drives, unless you are not sure Solaris had overwritten the D: drive on the extended partition
2. install RHEL-4 as the second OS. At this point you will be able to access Windows and RHEL-4 from GRUB. Boot RHEL-4 and navigate to /boot/grub/grub.conf. As you might need this information later, copy or make a note of the Linux entry on paper. The entry is something like this:
title Red Hat Enterprise Linux AS (2.6.9-78.0.1.el5)
root (hd0,1)
kernel /vmlinuz-2.6.9-78.0.1.el5 ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.9-78.0.1.el5.img3. install Solaris 10 (SunOS 5.10) as the third OS. That way the Solaris version of GRUB will overwrite Linux GRUB in MBR and will be installed as the common loader for all three OSs. At this point your system might be set to boot all three operating systems. If not, you will be able to access the Solaris and Windows only. In that case boot Solaris, navigate to /boot/grub/menu.lst and add the Linux entry you copied from Linux grub.conf in the step 2. The next time you restart the system, you should be able to boot all three operating systems using Solaris version of GRUB.
NJ -
After installing glibc patch (oracle9i - red hat linux 8)
My oracle9i was working fine on red hat linux 8. but after installation of a glibc patch
"glibc-2.1..3-stubs.tar.gz" something has gone wrong. it has renamed executables by appending/suffixing
zero '0' to the filenames. e.g sqlplus is sqlplus0
i cannot find my sqlplus? i am afraid to restart the system?
should i restart? what is the problem?Whenever you re-link Oracle, it makes backup copies of the executables (appending 0 to the filename). However, you should have a new SQLPLUS. I would suggest just doing a
relink all
from a command prompt as user Oracle and see if that helps. -
Can't install Oracle 9i for Red Hat Linux AS3
I can't install Oracle Database 9i for Red Hat Enterprise Linux.
Please see messages following:
[oracle@rhas3 oracle]$ /mnt/cdrom/install/linux/runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/java. Please wait...
/tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
[oracle@rhas3 oracle]$rpm -qa|grep libstdc++|less
libstdc++-3.2.3-20
libstdc++-ssa-3.5ssa-0.20030801.41
libstdc++-devel-3.2.3-20
libstdc++-ssa-devel-3.5ssa-0.20030801.4
anybody know how to install for RH AS3, I have tried many time to find out the libraries but still not work and I've plan for RAC also.
ChedDid you carefully go through all pre-req steps for install?
Oracle needs some "compatibility libraries" as well (compat-lib*). Here are packages for AS 10g, most or all of which apply to Database too.
Checking operating system packages: gcc-3.2.3-20,compat-gcc-7.3-2.96.122,compat-gcc-c++-7.3-2.96.122,compat-libstdc++-7.3-2.96.122,compat-libstdc++-devel-7.3-2.96.122,setarch-1.3-1,pdksh-5.2.14,sysstat-4.0.7,gnome-libs-1.4.1.2.90-34.1,libstdc++-3.2.3,compat-libstdc++-devel-7.3-2.96.122,compat-glibc-7.x-2.2.4.32.5
When required packages are in place, there's another error lurking, related to __libc_wait symbol.
runInstaller "boots" OUI, which includes running a JRE from tmp. This JRE (build 02) is broken, but you can setup to run another one via oraparam.ini and JRE_LOCATION. Download build 10 from Sun (google "jre 1.3.1 download"). -
Has anyone tried to install Oracle 11gR2 on Red Hat Linux 6 64bit?
The Oracle Universal Installer is checking for some Red Hat packages which are not the ones in Linux 6. Does anyone know how to resolve this issue?
Hi;
I'm aware that RHE6 is not certified yet. Someone was able to install it according to this link http://server.billhamilton.com:84/wp/oracle/installing-oracle-11gr2-on-
rhel6-in-4-long-steps/ but I'm not sure on how he got around the packages requirement.
I suggest see Tim's site
http://www.oracle-base.com/articles/11g/OracleDB11gR2InstallationOnOracleLinux6.php
Regard
Helios -
Problem on installing oracle 9i on red hat linux
anybody having experience on installing oracle on redhat?
I've tried to install oracle 9i on redhat 8.0. but when I run the
install command "./runInstaller" under Disk1,
I got a error msg: "line 58: ./runInstaller: cannot execute binary
file". (my x windows system works normally.)
the runInstaller in the error msg is that one under
/Disk1/install/linux. so what can I do to solve this problem?
Regards,
YabingI had the same problem. In my case, it was because of downloading an version of the software. You can check this by running the command:
readelf -h /cdrom/Disk1/install/linux/runinstaller
you should see something like
ELF Header:
Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
Class: ELF32
Data: 2's complement, little endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: EXEC (Executable file)
Machine: Intel 80386
Version: 0x1
Entry point address: 0x8048dd0
Start of program headers: 52 (bytes into file)
Start of section headers: 34164 (bytes into file)
Flags: 0x0
Size of this header: 52 (bytes)
Size of program headers: 32 (bytes)
Number of program headers: 6
Size of section headers: 40 (bytes)
Number of section headers: 30
Section header string table index: 27If the Machine entry does not match your server, then download the correct version and try again.
You may also want to check out www.puschitz.com which has some good articles on installing Oracle on Linux. You can also check out the Linux forum here under Tecnologies.
HTH
John -
How to install 11i on Red Hat Linux 64 bit
I'm having problems installing Oracle 11i on Red Hat Linux 64. I understand that it is not supported, however I need to go through the exercise of implementing OATM and then upgrade to 12.
I've started the install and I continue to hit this problem.
Any advise on how to get around this issue. Oracle Support insist on using 32bit. I do have a co-worker that has been able to install it on Red Hat 64bit.
Step 1 of 5
/DAT01/ebs/DataTop/visdb/9.2.0/temp/VIS_rac1/adrun9i.sh
Completed unzip 67 of 108
with 62% completeHi;
I'm having problems installing Oracle 11i on Red Hat Linux 64. I understand that it is not supported, however I need to go through the exercise of implementing OATM and then upgrade to 12. You mean oracle database 11g or you mean oracle e-business suite 11i? I am little confused
If you mention oracle database 11g than check below
What is exact linux version. Oracle 11gr2 certified wiht linux64. Please check:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
I've started the install and I continue to hit this problem.
Any advise on how to get around this issue. Oracle Support insist on using 32bit. I do have a co-worker that has been able to install it on Red Hat 64bit.
Step 1 of 5
/DAT01/ebs/DataTop/visdb/9.2.0/temp/VIS_rac1/adrun9i.sh
Completed unzip 67 of 108
with 62% completeIf you mention Oracle E-Busines suite than you can not install apps tier on 64 bit which is not supported.
Regard
Helios -
How to start SQLPLUS in oracle 10g which install on Red Hat Linux AS 4
I install oracle 10g on Red hat linux enterprize AS 4. but i can not start SQLPLUS. I could not login to grid control. When installation, some agents installations are fail. what can i do? please help me out.
I install oracle 10g on RHEL 4. But error occure in cofiguration assistant.
following assistance not configured (which are recommended):
Oracle Net Configuration Assistant - fail
HTTP Server Configuration Assitant - skipped
Java Security Configuration Assistant - skipped
OC4J Configuration Assistant - skipped
Web Cache Configuration Assistant - skipped
Oracle Instance Configuration Assistant - skipped
Oracle Database Configuration Assistant - skipped
OC4J Instance Configuration Assistant - skipped
OPMN Configuration Assistant - skipped
Register DCM Plug-ins with EM - skipped
Application Server Control Configuration Assistant -skipped
DCM Repository Backup Assistant - skipped
Enterprize Manager Reposotory Creation Assistant - skipped
Log Details given about "Oracle Net Configuration Assistant" as
/usr/app/oracle_sw_owner/oracle/product/10..0/EM10g_1/oracle.swd.jre/bin/..
/lib/i686/native_thread/libzip.so : symbol errno version GLIBC_
Unable to initialize threads:cannot find class javalang thread not define in file libc.so.6 with link time referance (libzip.so)
could not create Java VM
configuration of assistant "Oracle Net Configuration Assistant" fail
When try to run sqlplus from xterm, it gives an following error :
$ /usr/app/oracle_sw_owner/oracle/product/10.1.0/EM10g_1/bin/sqlplus
Message file sp1<lang>.msb not found
Error 6 initializing SQL*Plus
After installation there is an information is given for Enterprise Manager Grid Control and it gives an url as http://localhost.localdomain:7777/em. But when i try to connect it gives an error massage as "The connection was refuse when attempting to contact localhost.localdomain:7777"
Same situation when i try to connect Enterprise Manager Application Server (its url: http://localhost.localdomain:1810). It gives an error massage "The connection was refuse when attempting to contact localhost.localdomain:1810"
What can i do in this situation? Please help me out. -
JVM problem in installing oracle9i on Red Hat Linux ver 4.18
Hi ,
I am facing problem in installing oracle 9i on Red Hat Linux ver 4.18
Error are
" Initializing Java Virtual Machine from /tmp/OraInstall2007-06-10_12-11-22AM/jre/bin/java. Please wait...
Error occurred during initialization of VM
Unable to load native library: /tmp/OraInstall2007-06-10_12-11-22AM/jre/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference"
can anybody help me?Hi,
You should consider installing Oracle patch 4198954.
You can obtain it from Oracle Support (Metalink).
Regs,
Olivier Guyot -
StarOffice8 On Red Hat Linux x_86_64 Won't Start
I've just purchased the upgrade to StarOffice8 and installed it on my Red Hat Linux (AMD-64). The installation finished without any errors at all. I checked and all files were installed. However, when I start any of the apps, nothing displays. I can see the processes with 'ps' command but nothing on screen. I've changed the monitor resolution as described in the README, nothing works. All other X-WIndows stuff works fine. I have a pretty standard video card, the Nvidia FX 5200 and Red Hat came with drivers for that adapter. Can anyone help with this?
Hi Mink,
Confirm you have 1.5 GB free in /tmp. If not you can point the installer to another location -- set the variables TEMP, TMP, TEMPDIR to that new directory if you need to.
Regards,
John A. Booth
http://www.metavero.com -
How to Install Oracle on Red Hat Linux?
My System is having P4 1.8 GHz Processor with 128 MB RAM, 40 GB HDD(7 GB Linux Partition + 1 GB Swap Partition). I have installed Red Hat Linux 9(Server). Now, I want to install Oracle 9 on this syste. But I don't know how to install it. Anyone who knows this, plz, mail me the necessary system requirements alongwith some settings, if any. My Email ID is [email protected]/[email protected]
I think you'll have some problems with 128MB RAM.....<br><br>
:P Nonsense, but I do hope that hard drive is one of those new, fancy flash hard drives, otherwise the system will spend so much time swapping that it won't get past the installer. -
How to install Oracle 10g on to Red Hat Linux 5 Server
I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
ThanksUnfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.
Maybe you are looking for
-
Error releasing a billing document to accounting - Billing Plan error
Hello, I recently encountered a problem with releasing a billing document to accounting. When I click the release to accounting button in VF02 I would get this message "Billing plan 0000057337 does not exist - Program error". Here are my findings thu
-
Reading a text data file into memory
hi, I have a text file which contains data, The text file is parsed and objects are created. The problem is the text file is quite huge measuring upto 1.8~2 Mb. The format of the text file is as follows Units: METRIC (atm, m3) * Step: 1 Time: 0.00 *
-
In I cal, I am trying to make a schedule for the gym. It is basically the same every month. How can I transfer it from month to month.? Please help me.
-
Raw material as Traded material
Dear All, I am working for a client which is into manufacturing of Generators. One of the raw material which is used to manufacture the Generators, is also sold to vendor. For FG material, it is Make to Order scenario. For the raw material, its Make
-
I am having problems with Mail. Randomly, my mail does not reach it's recipients. According to my service provider, they say a bad URL gets attached to my email and the message gets put into their spam filter. I must stress that this is random pro