How to install device info record
Hi,
I have created device info record using MDT. Now I want to install this device info record. For the same I am using FM "ISU_S_WORKLIST_INSTALL". I am facing some issue in using this FM.
Could anyone tell how to use this FM i.e. which fields are mandatory to be passed for device and register??
Regards,
Vijay
Hi Vijay,
Maintain system parameters for device installation
"DEVCREATEI"
I hope it will work.....
when do u need this?
Similar Messages
-
Changes in standard screen of EG44(Device info record)
Hi,
I have to add some fields in other device data of Device Tab of the standard screen of EG44 as per the client requirement. Can you please help me how to do that.
Regards,
Mukesh KumarKindly check the function group :: XE07
There are so custom exits are there you can add the fields by using these FM.
EXIT_SAPLEG42_001 Device Modification: Device and Register Data afer Modification
EXIT_SAPLEG42_002 Check Device Info Record, Device Data, and Register Data
EXIT_SAPLEG60_001 Proposal for Allocation of Logical Registers
Please check these function modules and let me know.
Regards,
Shiva Kumar -
BAPI/FM for Device Info record
Hi All,
I want to create Device Info records in a mass process. Is there any particular FM/BAPI which i can use.
Also i want to do a mass Billing related installation . Is there any FM/BAPI which i can use for this.
Regards
HaricharanHi Hari,
For Device Info Records - the FM is ISU_S_SMALL_DEVICE_CREATE
For Billing Related Installation - the FM is ISU_S_WORKLIST_INSTALL
You could use ISMW transaction EMIGALL for mass operations
In that case the Migration objects are as follows
Device Info Record - DEVINFOREC
Billing Related Installation - INST_MGMT -
Cancellation of time slice in EG41 (device info record) for device
Hi,
How to cancel time slice for device in EG41 (deice info record)
Actually we have device which is technically installed. which has 2 time slice say 10.06.2009 to 16.06.2009 & 17.06.2009 to 31.12.9999. both different technical data. I want to cancel second time slice . how to do this???
I have already cancelled all meter reading corresponding in EL37.
Regards,
Chetansolved by myself
-
How to turn off Info records in MM - Urgent
Hi,
I work primarily in SRM (We are on SRM 5.0 Extended Classic Mode). Currently we are having issues related to 2-way match POs for a certain vendor (No Goods Receipt). From SRM side the PO has only Invoice required checked but when the same PO is transferred to R/3 it shows Goods Receipt and Invoice are required.
I see the info records are getting created for that vendor and material. I am suspecting that as the cause. How do we turn off the Info records completely. Please be detailed since my knowledge of MM is limited.
ThanksHi,
There is no advantage to setting off the info record update.
thsi will NOT be the cause of your problem.
The likely cause is the standard configuration of the account assignment categories that are being used in MM. These dictate (via the config settings) the default flags for GR and IR etc.
So check the config of the account assignment categories (SPRO MM> Purchasing > Account assignment > Maintain account assignment catefories.
Steve B -
How can we create info record using IDOC INFREC?
Hi Friends,
Can we create info record using IDOC INFREC. If Yes. How?
Regards,
NarendraUsing IDOC INFREC & FM IDOC_INBOUND_SINGLE
-
How to installed device on iPad
how to installed that device
Read the error message you received. That's why. Wishing won't make it so.
-
How to install device cals on Windows Server 2012 standard edition
Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to install device type via AIX client
Hello,
I would like to install a printer device type PRI file to the SAP system via an AIX client. Would appreciate some detailed steps and assistance.
Using: SAP R/3, OS AIX ver 5.3. TL 7
Thank you.> Hi, Thank you for the information, but I am not able to download the SAP Note 6427.
> Reason: I do not have the username and password.
- start transaction SE38
- execute the program RSTXSCRP
- press on the button with the "i" to get the documentation
Markus -
How to maintain Purchasing Info Record
Hi All,
Here i am facing one problem how to implement the below requirements in SAP.
I have got a quotation from my vendor like below
1-5 pcs per run US$ 200 per run
6 - 9 pcs per run US$ 350 per run
10 - 19 pcs per run US$ 32 per pcs
20 -29 pcs per run US$ 28 per pcs
30 pcs per run US$ 25 per pcs
that means if my PO qty is in between 1 to 5 then my PO cost is 200$ & if my PO qty is 6 to 9 then my PO cost is 350$. Similary if my PO qty is in betwen 10 to 19 then my PO cost will be PO qty* 32$.
How i'll maintain my inforecord so that when i'll create Po for some qty it will trigger the correct value.
Waiting for solution.
Regards
IndrasishHi
Goto ME12, click on conditions & there you will find a icon scales/slab rates fourth icon on top, click on that enter below qty.
5 US$ 200 per run
9 US$ 350 per run
19 US$ 32 per pcs
29 US$ 28 per pcs
30 US$ 25 per pcs
When ever PO qty lies in above slab price is picked accordingly.
NOTE : dont enter 1-5 or 6-9 just enter 5 & next value 9 system considers it as 1 to 5 & 6 to 9.
Regards
Rang
Message was edited by:
Ranganath Mysore
Message was edited by:
Ranganath Mysore -
Is there any FM/BAPI to create Device Information Record
HI all,
Is there any FM/BAPI to create Device Information Record.
with regards,
Sumanth.Hi,
I want to install device info record. For this I have found FM "ISU_S_WORKLIST_INSTALL". But I am not able to use it properly. Could you please tell me how to use this FM.
Regards,
Vijay -
Device data: Info record for point of delivery EGERR new fields
Hi folks,
due to deregulation we had to implement instead of regular devices some simplified devices from table EGERR.
We now need to implemant a new filed : 'activity reason' GERWECHS like in EGERH.
I did find the include CI_EGERR wich has to be used but cannot find the screen-exit to feed the fields.
Has some body any good idea to find the exit?
thksPackage / Development Class EE07
EXIT_SAPLEG42_002 (Check device info record, device modification, device and register data)
Regards,
Siva -
Purchase Info record - Split valuation
Hi Experts,
I have a problem in working with split valuation.
I have a material with split valuation with valutation types Domestic and Import.
Same vendor supplies both the valuation types material.
I want to create purchase info record for two valuation types with the same material, vendor,purchasing org.,Plant.
I am able to create info record for only one valuation type.
Is there any way that I can create info record for both the valuation types for a vendor,material,Plant and Porg.?
Thanks in advance.
Best regardsDear Lakshmi,
I'm not sure how u create an info record until val,type level , as per i know valuation type is the information in the Purh.Org data in info record. So when maintaining info record you got combination of vendor,material, plant, p.org, and info rec category.
The material per valuation type value will updated to the mat master when u done GR,
So you dont need to maintain the value in info record, because in the material accounting level there'll be 2 valuation type for that material which contain both value for domestic and others.
Edited by: w1n on Apr 9, 2008 6:25 PM -
Info records field in Purchase Order
How can we make info-record field mandatory for selected purchasing organization when creating Purchase Order using ME21N.
I can think of 3 options:
1) Use field settings if you want it mandatory for all purchasing organizations.
2) Another way would be to create 2 document types - one with info record mandatory and other with info record optional. People purchasing for the purchasing organizations where info record is required will be authorized only for the first document type (where info record is mandatory)
3) Use user exit EXIT_SAPLEBND_002 (the one for PO Release). This can be activated even if PO release is not active.
Lakshman -
BAPI for Purchase info record creation
Hi
Please let me know how to create purchase info record through BAPI, with tax codes along with material price.
please guide me.
SimhaHi,
ME_MAINTAIN_INFORECORD
ME_UPDATE_INFORECORD
ME_GET_INFORECORD_CONDITIONS
ME_PRICING_INFORECORD.
ME_DIRECT_INPUT_INFORECORD
ME_POST_INFORECORD.
Maybe you are looking for
-
Compatibility between MV on 10g from 8i Master Database ?
We have a master DB on 8i and we are currently using MV on DB 9i, Now we are going to migrate DB 9i to 10g so i need to know if MV between 10g -> 8i is supported. Thanks in advance
-
Device Installer error - Windows could not load the installer Image.
I am windows XP and have loaded new Itunes 7.7 and the Iphone 3G I just received cannot be recognized by my PC/XP I get a dialog box saying Device Installer Error Windows could not load the Installer Image. Contact your hardware vendor for assistanc
-
Hi, I pick up the Twist (4HU) a few weeks back. I want to swap the Broadcom Wi-Fi card out with an Intel one so I can take advantage of my WiDi adapter from my old laptop. Does anyone know which adapters are compatible with the Twist? I searched i
-
First compilation on system is long... Why ?
Hello, The first compilation of a program, transaction, report in ERP 6.0 is very long ( 10, 15 minutes for easy reports and 30 minutes for big reports). But after it works fast to call transaction, report... What can be the problem ? IS it possible
-
Hello, I am trying to acquire data from a device via serial communication. Now the device will only output information when the event occurs. I know i can stop the visa read from timing out, but then the program will be constantly in a hang state un