How to install drivers for windows 7 from bootcamp

how to install bluetooth driver for windows 7 (bootcamp)?

make the usb stick or cd disc from osx bootcamp with all the apple drivers
start windows
navigate the usbstick or disc and install the bluetooth drivers

Similar Messages

  • HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

    I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

    Go back to Boot Camp: on the 2nd page you get this:
    Download the support software and as Windows is already installed uncheck the 2nd box.

  • How to install drivers for ati radeon 3200?and how to config xorg.co ?

    how to install drivers for ati radeon 3200?and how to config xorg.conf?

    mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
    Hello
    I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
    #pacman -Sy
    #pacman -S -l | grep -i catalyst
    #pacman -S catalyst catalyst-utils
    After installation reboot your machine in runlevel 1. (single mode).  Ensure "fglrx" module is loaded correctly using
    #lsmod | grep -i fglrx
    If the resultant output have "fglrx" part  the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
    #cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
    Then issue
    #aticonfig --initial --input=/etc/X11/xorg.conf
    This will create a new xorg.conf file. Now we can test our confign.
    #telinit 3
    I am using runlevel 3 to avoid graphic messup!!
    issue
    #gdm
    If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
    To know your ati driver is working correctly issue as root
    #fgl_glxgears
    If gears are rolling happily it seems correct. You can also know more about installed ati driver
    #fglrxinfo
    Now the installed driver version is in the output 
    If there is any problem try following
    ##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
    yes video playback is choppy until i ran :-
    sudo aticonfig --overlay-type=Xv
    Try adding the following to the 'Device' section in /etc/X11/xorg.conf
    Option "TexturedVideo" "true"
    ### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
    mythfrontend --geometry 800x600
    Append the "Device" Section of /etc/X11/xorg.conf file as follows;
    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    Option "OpenGLOverlay" "off"
    Option "VideoOverlay" "on"
    Option "TexturedVideo" "on"
    Option "TexturedVideoSync" "on"
    Option "Capabilities" "0x00000800"
    BusID "PCI:1:0:0"
    EndSection
    Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
    export LIBGL_ALWAYS_INDIRECT=true
    ####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
    ####### as in the following example
    title  Archlinux Ice Kernel
    root   (hd0,1)
    kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
    initrd /boot/kernel26-ice.img
    NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!!  ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
    Wish U good luck
    mvdvarrier

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

    How to prevent iTunes for Windows from "Updating iTunes Library"?
    My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
    Thanks for any help/suggestions.

    Connect the PC to the library on the NAS. Wait while "updated".
    Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
    Close iTunes on the PC. Do not open iTunes on the Mac.
    Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
    Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
    The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
    Open iTunes on the Mac. It will update again, but that should be last time.
    tt2

  • How to manually install drivers for windows 7 64 bit?

    How do I install drivers for iphone 5s?  My desktop windows 7 64 bit is not recognizing the iphone

    Download and install the 64 bit version of iTunes to get all drivers for iOS devices.
    http://www.apple.com/itunes/download/

  • Installing drivers for Windows XP leads to "fatal system error"

    Hello,
    I am trying to install the drivers for Windows XP on my new MacBook, using boot camp from my Mac OS X install cd (version 10.6.3). The option comes up for me to either "repair" or "remove" drivers. I clicked on repair, and after about 5 min of smooth installing, the screen went blue and said that there had been a "fatal system error".
    I also tried removing the boot camp, and then repairing and the same thing happened. I was glad to find that everything on the Mac side of my computer is still working fine.
    Is there anything else I can try to install the drivers successfully?
    Thank you!!
    P.S. I just noticed that my MacBook is running OSX 10.6.4, but the install cd that came with my Mac says it's OSX 10.6.3. Do you think that could have something to do with the problem?

    XP 64-bit has never been supported.
    http://support.apple.com/kb/HT3777
    http://www.apple.com/support/bootcamp/
    Boot Camp: Windows 7 installation frequently asked questions
    http://support.apple.com/kb/HT3986
    Boot Camp Software Update 3.1 for 64-bit requires 3.0
    http://support.apple.com/kb/DL979
    Windows Install
    http://discussions.apple.com/forum.jspa?forumID=1244

  • How to install itune for windows 7

    I have a problem install itune for windows 7. Please help.....
    After installing itume 10.2.2 64-bit, It prompt me "Apple Application Support" is require to download itune.
    Info:
    Model: Sony vaio
    Windows 7 Home Premium
    Rating: 3.2
    Processor: Intel(R) Core(TM) i3 CPU [email protected]
    Memory: 2.00GB
    System: 64-bit Operating System

    It prompt me "Apple Application Support" is require to download itune.
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • X-Fi Extreme Music || when installing drivers for windows vista 32 bits, error mess

    I get an error message when I install windows vista 32bits drivers for my X-Fi Extreme Music... it says, error while installing, can't find a compatible product on your system, verify if it has been corectly installed ... BUT INSTALLING I JUST WHAT I WANNA DO ! WTF?
    all other software for hardware management can see that my sound card is connected to my mother board, so i don't understand why the driver installer can't see it too and install the drivers ...
    Could someone give me a tip to help me to install my drivers please?
    i got windows vista 32bits build 6000 , X-Fi Extreme Music, 2048 RAM, Pentium4 3.6ghz 250 go hdd space ...
    I'm waiting for some cool answers, thanks ! ...

    You are wrong. The 2.3 are for extreme music, you are thinking about extreme audio. Creative have really made a blunder with these names, not strange many are having problems. Propably trying to install extreme audio drivers on extreme music, and the other way around!?
    Check that you have the right drivers, if you do. Try the trick where you unpack the driver exe file, so you get all the files from the installer on to a folder of youre choosing. Then use the "Creative Update Utility" popup to install/force the drivers to install. If you dont know what im talking about, search the forums, its been explained many times here.

  • How to install drivers for nvidia geforce 6800gt for AGP

    I might be completely blind, but I have no idea as to how to install the necessary drivers I need for my new (used) graphics card. My card is not displaying properly (doing all this in safe mode) and I'm pretty sure I need the drivers. Please help.
    Thanks in advance.

    So sorry for wasting anybody's time. Steve, you're right, the drivers were already there. I missed a very, very small detail on the card and the instructions. There were 2 minuscule pieces of tape that needed to be pulled off from the card (I guess they were left on in case the buyer had a g4. But with a g5, and 8x agp, those two little pieces of tape needed to be pulled off. After I pulled them off and re-installed the card, everything started up immediately and display works! Sorry again, but thanks for the quick response.

  • How to install hardware for windows 7

    I cannot find drivers for peripherals and I cannot connect to the Internet because drivers for wi-fi and ethernet are not available

    You need to download the drivers from the Apple website while booted into OSX. Burn the drivers onto CD and then, boot into Windows.
    Install the drivers from CD. Do you have an external CD drive for your MacBook Air?

  • How to install drivers for importing and burning CDs

    When I open my iTunes program, I receive a notice that: the drivers for importing and burning CDs and DVDs are missing.  I have attempted to re-install the iTunes program, but to no avail. 

    See iTunes for Windows: "Registry settings" warning when opening iTunes and/or iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

  • How to install sources for infobject from business content

    Hi,
    I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
    Thanks

    Hi daniel,
    Inorder to  install the business object, you will be require to follow the following steps :
    i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
    ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
    iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
    iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc  as you want.
    v)Now you want to see if there can be some predictive error then go Install  --> Simulate Installation.
    vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your   A-version Material Group will be overwritten by the D-version Material group provided by SAP.
    vii)For ur more understanding lets take the example say  you have  added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now  you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X) 
    Hope it will help. 
    Thanks,
    Deepak Machal

  • How to install drivers for HP Color Laserjet 1215 and HP Scanjet G2410 on Mavericks?

    I recently purchased MacBook Pro and upgraded the OS to Mavericks. I am unable to find drivers for my HP Color Laserjer CP1215 printer and HP Scanjet G2410 scanner which I was using with HP Laptop. Google search yielded instructions at http://foo2zjs.rkkda.com/INSTALL.osx for the HP CP1215 printer. However, the instructions don't seem to be working on Mavericks. So, I am stuck with a printer and scanner which don't work with Mac. Thanks in advance for any help.
    Ajit Singh

    I don't see either of those models on http://support.apple.com/kb/HT3669. You should probably check with HP to see if they are still supported.
    https://discussions.apple.com/message/23611767#23611767

  • How to install drivers for Ni USb 6009

    Hi
    I am trying to use an NI-USB 6009 and was wondering if its possible to install just the drivers for this hardware. I know that I can install the NI-Daq base but I would really like to install the minimum amount of software onto my computer that has linux. However, I did try to install the NI daq base and the installation is failing because of an input/output error, (I am not really sure why).
    I would really like to be able to just install the drivers for the USB-6009. I was just wondering if that was possible and where I could find them.
    Thanks

    Hi Cannonball,
    You'll know pretty quickly after installing DAQmx Base and running the lsdaq utility as to if you need different firmware. The 6008 and 6009 must have a different firmware loaded to be able to run DAQmx Base 3.x. This is not a problem though as there is a firmware updating utility that comes with DAQmx Base and it's fairly straigh forward. For more information, see the link below.
    KB 491FPHB9: Firmware Incompatibility With Different Versions of DAQmx Base.
    http://digital.ni.com/public.nsf/allkb/91CBCFE9E171C845862572CF0077D8F9?OpenDocument
    PBear
    NI RF

Maybe you are looking for