How to install Enterprise Manager Cloud Control on Oracle Linux 6.2

Anoyone know if it's possible to install this product to Oracle Linux 6.2 ?
I have an error with this librarie : glibc.i686 : The GNU libc libraries
Thank You!

Anyone know if it's possible to install this product to Oracle Linux 6.2 ?It's not certified on OL6, so you will be on your own, support-wise.
I have an error with this librarie : glibc.i686 : The GNU libc librariesAre you on a 64-bit platform? You probably don't have the 32-bit libraries installed. Assuming you are registered with ULN, or http://public-yum.oracle.com do this:
# /usr/bin/yum install -y glibc.i686Expect to get a lot of RPM's. Expect to do this again a few more times with other packages as well. Even then it may not work; best of luck.

Similar Messages

How to disable autostart of Enterprise Manager Cloud Control (EMC12cr2)

Hi Everyone,
I am new to Oracle Enterprise Manager Cloud Control 12c Release 2 ( EMC12cr2)
Recently, I have installed EMC12cr2 on Oracle Linux 6.3. I follow one document to install, and It was ok after the installation.
But after I reboot the testing server, I found out that it is very slow as the EMC12cr2 services are auto start at boot such OMS, and agent.
So could you please tell me how to disable the EMC12cr2 or OMS service from auto startup, so that it makes the system reboot faster.
Thanks in advance,

Take a look at this article on My Oracle Support - 1478617.1
It's a little older, but the same idea applies. There is a script in /etc/init.d/ called gcstartup, you can comment out the startup lines in there with a hashtag.

How to find out Oracle Enterprise Manager Cloud Control 12c Home page

Hi all,
I have a PROD environment with OEM Cloud Control 12c and I do know its home page, but today I was wondering, what if I do not know the environment where could I get this info.
So I tried to find it out on Oracle docs and on the internet, on my environment but I was not able to find this info.
Could you guys help me?
Thanks in advance.

Hi ,
The easiest way is to run emctl status oms -details command from OMS_HOME/bin and check for the value for Console URL
example
$ emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host        : myomshost.mydomain.com
HTTP Console Port          : 7789
HTTPS Console Port         : 7801
HTTP Upload Port           : 4890
HTTPS Upload Port          : 4901
EM Instance Home           : /u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1
OMS Log Directory Location : /u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1/sysman/log
OMS is not configured with SLB or virtual hostname
Agent Upload is locked.
OMS Console is locked.
Active CA ID: 1
Console URL: https://myomshost.mydomain.com:7801/em
Upload URL: https://myomshost.mydomain.com:4901/empbs/upload
WLS Domain Information
Domain Name      : GCDomain
Admin Server Host: myomshost.mydomain.com
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: myomshost.mydomain.com
WebTier is Up
Oracle Management Server is Up
Other way is to check in the <OMS_HOME>/install/setupinfo.txt file and check for Enterprise Manager Cloud Control URL
Regards,
Rahul

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

Oracle VM and Oracle VM Template for Enterprise Manager Cloud Control 12c M

Hello!
After installation of *"Oracle VM 3.1.1 Media Pack v1 for x86_64 (64 bit)"* to bare hardware
can I install Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack ?
Is it the wrong plan ?
What to do if I need to set VLAN №1 ? (according note of installer I have to choose number between 2 and 4094 )
Thanks and regards,
Pavel
Edited by: Pavel on Jul 30, 2012 5:01 AM

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1

Hello
I download Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
I was checking the structure and I found this
[oracle@em12c bin]$ cd /u01
[oracle@em12c u01]$ ls
app lost+found OracleHomes oracle-template.sh scripts
[oracle@em12c u01]$ cd OracleHomes/
[oracle@em12c OracleHomes]$ ls
checkpoints db11g Middleware
[oracle@em12c OracleHomes]$ pwd
/u01/OracleHomes
[oracle@em12c OracleHomes]$ cd db11g/
[oracle@em12c db11g]$ ls
admin cfgtoollogs checkpoints diag fast_recovery_area oradata product
[oracle@em12c db11g]$ cd ..
[oracle@em12c OracleHomes]$ cd Middleware/
[oracle@em12c Middleware]$ ls
[oracle@em12c Middleware]$
The Database has all binaries but Middleware is empty
Same body knows about this issue.
Regards

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Install Enterprise Manager Grid Control 11R1 Failed at OMS Configuration

Hello:
I have installed Oracle 11g (11.2.0.1) and WebLogic Server (WLS) 10.3.6.0 and currently I am in the process of installing Enterprise Manager Grid Control 11R1 on a Linux RedHat 5.8 and it fails at OMS Configuration.
I have read the following thread and they suggested to use WLS 10.3.2:
Trouble installing EM GC -- installer patch 9329357 fails
I was looking for WLS 10.3.2 in Oracle's website and I could not find it.
Any help would be greatly appreciated.
Here is the log regarding the error:
The patch has more than one Archive Action but there is no Make Action.
ApplySession applying interim patch '9367763' to OH '/dbs0/product/fmw/oms11g'
Running prerequisite checks...
You selected -local option, hence OPatch will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/dbs0/product/fmw/oms11g')
Is the local system ready for patching? y
Y (auto-answered by -silent)
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '9367763' for restore. This might take a while...
Backing up files affected by the patch '9367763' for rollback. This might take a while...
Patching component oracle.ldap.rsf, 11.1.1.2.0...
Updating archive file "/dbs0/product/fmw/oms11g/lib/libldapclnt11.a" with "lib/libldapclnt11.a/gslu.o"
ApplySession adding interim patch '9367763' to inventory
Verifying the update...
Inventory check OK: Patch ID 9367763 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9367763 are present in Oracle Home.
Execution of 'sh /dbs0/product/fmw/oms11g/install/oneoffs/111010/9367763/custom/scripts/post -apply 9367763 ':
Return Code = 0
The local system has been patched and can be restarted.
OPatch succeeded.
This config tool has failed. Please re-run this config tool manually from another terminal as
<ORACLE_HOME>/perl/bin/perl <ORACLE_HOME>/install/oneoffs/apply_NewOneoffs.pl <ORACLE_HOME> <oneoff_numbers>
Eg: /scratch/EM/agent10g/perl/bin/perl /scratch/EM/agent10g/install/oneoffs/apply_NewOneoffs.pl /scratch/EM/agent10g 5632264,5961654
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
Configuration assistant "OMS Oneoff Patch Application" Succeeded
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /dbs0/product/fmw/oms11g/sysman/log/schemamanager
The create is completed now running the MOS
Configuration assistant "Repository Configuration" Succeeded
Running Configuration assistant "MDS Schema Configuration"
Configuration assistant "MDS Schema Configuration" Succeeded
Running Configuration assistant "OCM EM Repository Instrumentation"
Configuration assistant "OCM EM Repository Instrumentation" Succeeded
Running Configuration assistant "OMS Configuration"
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /dbs0/product/fmw/oms11g/cfgtoollogs/omsca
INFO: Required tool's Execution failed
Configuration assistant "OMS Configuration" Failed
INFO: ***Configuration Assistants Action END ***
*** The installation was Successful, but some configuration assistants were failed or cancelled or skipped. ***

Hello:
For some reason after selecting the Retry button it successfully passed the Add-on OMS Side Configuration. Now I am failing at the "Agent Configuration Assistant". Here's the agent log:
log4j:ERROR No appenders could be found for category (oracle.sysman.emas.sdk.discovery.discover.WeblogicTargetDiscovery).
log4j:ERROR Please initialize the log4j system properly.
Total Discovery time is :1675milliseconds.
INFO: oracle.sysman.top.agent:AddingToTargetsXml: WLS targets
INFO: oracle.sysman.top.agent:Adding /oracle/product/agent11g/sysman/install//oraclewls.out file to /oracle/product/agent11g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file= /oracle/product/agent11g/sysman/install//oraclewls.out to /oracle/product/agent11g successfully.
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with startAgent=true
INFO: oracle.sysman.top.agent:Starting the agent
INFO: oracle.sysman.top.agent:Starting the agent...
INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/agent11g/bin/emctl start agent
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2010 Oracle Corporation. Allrights reserved.
INFO: oracle.sysman.top.agent:Agent is already running
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.agent:11.1.0.1.0:common:family=CFM:oh=/oracle/product/agent11g:label=10} failed with an unhandled exception:
java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:269)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:243)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
Any help would be greatly appreciated.
Thanks,
Orivares

Install Enterprise Manager Grid Control 10.2.0

Hi,
to install Oracle Enterprise Manager Grid Control 10.2.0. should I
1-install 10g Release 1 (10.1)
2-Apply patch nnnn (Which number ) ?
Is it possible to install Enterprise Manager Grid Control 10.2.0. from scratch ? Where can I download the ressource ?
Thank you.

You can check this:
[http://www.oracle.com/technology/software/products/oem/htdocs/gridR3_10203_readme.html]
steps are outlined here:
[http://www.oracle-base.com/articles/10g/Oracle10gR2GridControlInstallationOnRedHatAndCentOS.php]
Edited by: Anantha on Apr 14, 2009 11:23 AM

Dbcontrol migrate to enterprise manager cloud control 12c

Currently we are using Oracle 11gR2 database in our enterprise and manage them with EM database control.
We're planning to migrate to centralized management with oracle enterprise manager cloud control 12c.
Is it possible to manage DBs both ways, with db control AND using EMCC agent simultaneously?
Is there a easy way to migrate db control managed DBs to be managed by agent?
I've searched EM documentation but didn't find any topic about this job.

Hi P2
Yes You can manage DB from both. But why you are going to use EM instead of Cloud Control 12. You Can do each and every work from it more tan EM. Cloud Control 12c is very good tool.
No. But You can easily setup them using manual agent push or auto discovery method from cloud control 12c. You need to create password less ssh login to both side for oracle user and open the relevant ports from network. It is very easy. After add agent you can add targets from relevant hosts easily.
Thanks
Dilshan
Edited by: user11923797 on Dec 24, 2012 10:39 AM

How to install Enterprise manager

Hi all,
I unable to access to enterprise manager console URL.I was thinking the solution of this problem is EM unstalled and then reinstalled.So i have unstalled Enterprise manager product using
Oracle Universal installer. i don't know how to install the EM in my database. Please tell me how to install the ORACLE?
where to download Oracle EM?
Thanks,
michael.

Hi there,
for downloads of Enterprise manager, use the following link:
http://www.oracle.com/technology/software/products/oem/index.html
For instructions on how to install, use this link:
http://www.oracle.com/technology/obe/start/index.html
scroll down the page to "EM Grid Control 10g" and select "Oracle Enterprise Manager 10g Grid Control", there are currently 4 versions supported with screenshots here, enjoy.
--Grummy.

Enterprise manager cloud control 12c issue configuring Target Disconvery

I've performed a silent agent install of Oracle Enterprise Cloud Control Agent 12c on the first node of a RAC two node cluster (oracle 11gR2) on Red Hat Linux 5.6 64bit.
oemgrid>./emctl status agent
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.1.0
OMS Version : (unknown)
Protocol Version : 12.1.0.1.0
Agent Home : /emcc/agent12c/agent_inst
Agent Binaries : /emcc/agent12c/core/12.1.0.1.0
Agent Process ID : 31354
Parent Process ID : 31302
Agent URL : http://rac1.respecti.com:3872/emd/main/
Repository URL : https://emcc.respecti.com:14511/empbs/upload/
Started at : 2011-10-25 16:36:47
Started by user : oemgrid
Last Reload : (none)
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0
Number of XML files pending upload : 1
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 91.95%
Collection Status : Collections enabled
Last attempted heartbeat to OMS : 2011-10-25 16:36:52
Last successful heartbeat to OMS : (none)
Agent is Running and Ready
However from OMS server (OECC 12c)
From Setup -> Add Target -> Configure Auto Discovery
Configure Auto Discovery -> Database - Listener -> Agent Based -> Configure
Add Host -> Target Type = Host
Target Name = rac1
Host Name = 192.168.1.12 -> Search -> AND NO TARGETS FOUND
Why
Recommendations Appreciated!

If I am understanding correctly, you are looking to discovery a RAC DB on a host on which you deployed an agent. The auto discovery configuration you mention is used to configure the frequency of automatic discovery on a given host after the initial deployment. Normally, you do not need to do anything in this screen.
Immediately after initial installation and successful registration, the agent will search the host automatically for database installations and report its findings to the OMS. These results can be seen in Setup->Add Target->Auto Discovery Results on the Non-Host targets tab. Here you can search by host and you should see a Cluster Database target. To get the target under management, select it and click Promote and follow the wizard.
You can also initiate a discovery of databases on a host by going to Setup->Add Target->Add Targets Manually. Select Add Non-Host targets using Guided process. Select target type in drop down of "oracle database, Listener and Automatic Storeage management". The click Add Using Guided Discovery. Here the agent will immediately scan the host and show the results which you can then complete the target addition process.
If I am misunderstanding you please let me know.
Dave

How to install Enterprise manager on two node cluster

Hi,
I am new to Oracle working on 10g
can anyone post a document or link for step by step installation of oracel 10g enterprise manager on a two node cluster?
Thanks in advance.

userArshad wrote:
Thanks Hans.
To be specific I have to install Database control .that means I need to use the GUI .
Also I could see database control and DBconsole service on on 1st node but I cannot find that in 2nd node.That is the normal configuration - you use the DB Control from node 1 and it gets the information using the agent on Node 2. The DB Console then displays the information for both nodes.
Please note that the DB Control will place a relatively heavy load on each machine, which is why we want to restrict our load to the agent. It is for that reason that we prefer to use the Grid Control whenever possible - it provides the same mechanism and screens, but the JEE platform is on a separate machine and all you have on the RAC nodes is the agent.
But if you really want to run the DB Console from each node (again, not normally needed) you need to use emca to configure it on the second node. Metalink note 863631.1 should help you with that.

How to install Enterprise Manager to JDeveloper integrated Weblogic domain

I have installed JDeveloper 11g and as you know it also installs an embedded Weblogic and creates a Weblogic domain. This domain by default has the console application but does not have the em application. How can I add em to my integrated Weblogic?

Sturla,
I can give you the quick steps for installing EM into the WLS container integrated with JDev:
1). Download from OTN two pieces of software from the Fusion Middleware 11g (use the "For Deployment" software, click "See All"): the Application Development Runtime, and (under Additional Required Software) the Repository Creation Utility (RCU).
2). Unzip the RCU and run bin/rcu.bat or bin/rcu (windows/*nix). Create the MDS repository in an Oracle DB using this utility.
3). Install the application development runtime into the same home you installed JDeveloper.
4). Run the configuration wizard - on Windows its in the start menu / Oracle Fusion Middleware 11.1.1.1.0 / Weblogic Server 11gR1 / Tools. Find it yourself on *nix ;)
5). Choose to extend a domain
6). Pick your DefaultDomain directory for the integrated WLS
7). Tick the checkbox to add enterprise manager
8). Supply the database connection information for the DB in which you created the repository in step 2.
Ta-da!
The EM will be accessible via http://hostname:7001/em, username/password=weblogic/weblogic1. I will caution you about generically installing into the integrated domain - it makes your WLS take noticeably longer to start up...
Best,
John

Deploying a VM Guest within enterprise manager cloud control

Hi,
I have setup cloud control 12C completely, but when I try deploying a VM, the job remains in scheduled status with no progress.
i can create and install VM with OVM manager without any problem.
I have tryed this with OVM manager 3.0.1 and 3.0.2 none of them worked.
any idea

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

How to install Enterprise Manager alone 9i?

Anyone,
Is there an easy way to install the oracle Enterprise Manager on a PC without installing all the Web Server stuff that typically goes with the EM?
I have tried custom install many times in past but I still end up getting Apache onto the machine and all kinds of unneeded stuff.
All I am after is the web based admin tool capabilities.. Does Oracle possibly have it hidden as a stand alone download anywhere instead of being in the entire Oracle Enterprise download?
Thanks in advance,
Miller

Anyone,
Is there an easy way to install the oracle Enterprise Manager on a PC without installing all the Web Server stuff that typically goes with the EM?
I have tried custom install many times in past but I still end up getting Apache onto the machine and all kinds of unneeded stuff.
All I am after is the web based admin tool capabilities.. Does Oracle possibly have it hidden as a stand alone download anywhere instead of being in the entire Oracle Enterprise download?
Thanks in advance,
Miller

How to install Enterprise Manager Cloud Control on Oracle Linux 6.2

Similar Messages

Maybe you are looking for