How to install Expense manager

Thanks for Helping to install Expense manager on my 6234.

If you had it, then is this Expense Tracker? (here's some info)
If that is the case, then you can use Nokia PC Suite's Install Manager (download PC Suite), send it through Bluetooth without the use of PC Suite, or directly download it from the Internet.
Do you have any way to connect the phone to the computer?
Message Edited by kamenlitchev on 27-Nov-200709:38 AM
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

Similar Messages

  • How to install Solution Manager 7.0 ehp 1 on Laptop

    Dear Expert !
    I have a laptop Sony Vio only support 32 bit, but I need install Solution Manager 7.0 EhP 1 on this laptop to test. So you can show me how to do that . I hope, you show me as soon as possible.
    Thanks and Best Regards,
    Tru Hang

    Tru Hang,
    Even when 32 bit Solution Manager was supported, it is very doubtful your laptop would have the required memory or diskspace to install and run the system. You can see the system requirements in the SAP installation guides.
    Hope this information was helpful.
    Regards,
    Paul

  • How to install Enterprise manager

    Hi all,
    I unable to access to enterprise manager console URL.I was thinking the solution of this problem is EM unstalled and then reinstalled.So i have unstalled Enterprise manager product using
    Oracle Universal installer. i don't know how to install the EM in my database. Please tell me how to install the ORACLE?
    where to download Oracle EM?
    Thanks,
    michael.

    Hi there,
    for downloads of Enterprise manager, use the following link:
    http://www.oracle.com/technology/software/products/oem/index.html
    For instructions on how to install, use this link:
    http://www.oracle.com/technology/obe/start/index.html
    scroll down the page to "EM Grid Control 10g" and select "Oracle Enterprise Manager 10g Grid Control", there are currently 4 versions supported with screenshots here, enjoy.
    --Grummy.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to install  megaraid manager on sun fire x4170 m2 running on oracle vm

    hi..
    hope some can help me about below issue
    1.how to install lsi megaraid manager on sun fire x4170 m2 running on oracle vm server 3.0.3 ?
    sun fire x4170 m2 --> oracle vm server 3.0.3
    sun fire x4170 m2 --> oracle linux 6.2 ( install lsi megaraid manager and able to open megaraid manager locally )
    what i want is install megaraid manager or agent on oracle vm server , then i can use oracle linux with megaraid manager to ocntrol raid disk on oracle vm server 3.0.3 , i download the driver and software from my oracle support , unlucky not include oracle vm 3.0.3 .
    hope some one can help me
    tq

    889759 wrote:
    1.how to install lsi megaraid manager on sun fire x4170 m2 running on oracle vm server 3.0.3 ?You can't: MegaRAID Manager is not supported on Oracle VM 3.0.

  • How to install Oracle Management Server Oracle9i

    Please tell me the steps one takes to properly install Oracle Management Server (Oracle9i) on a PC.
    Which of the diskettes to use for installation, and what are the cookbook steps from 1 - 10 for a beginner. I thought I had
    loaded the software on my system, only to discover the next day that I had not.
    Thanks for your forthcoming help.
    Mary

    I also installed Oracle 9i yesterday but there is no Oracle Management Server Service in the Control Panel. How can this be rectified, any ideas anyone ?

  • How to install Transportation Management 9.0

    Hi Experts,
    I am new to SAP BASIS.
    How to download and install Transportation Management 9.0 components and please provide any document for installing the same.
    Thanks
    Nag.

    Hi,
    This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick assitance.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • How to install window manager: awesome ? package not found

    hello,
    i have installed arch linux from: archlinux-2010.05-core-dual.iso.
    Base installation.
    i made a system update
    # pakman -Syu
    # packman -S base-devel
    [comunity] is enabled in /etc/pacman.conf
    but if i try
    # pakman -S awesome
    i get
    error: 'awesome' could not find or read package
    what did i wrong ?
    Thanks

    ds2k5 wrote:
    sorry can please sombody give me a step-by-step howto ?
    i dont know how to install waesome from AUR
    thanks
    Re-read fsckd's post - the link to AUR wiki article is all you need. If you still can't figure it out, sorry, but ArchLinux may not be the distro for you.

  • How to Install Windows Management Framework 4.0 on Server 2008R2 Core

    I am trying to upgrade Server 2008R2 Core to PowerShell 4. I have carried out following steps.
    1. Installed .NET Framework 4.5.1 (NDP451-KB2858728-x86-x64-AllOS-ENU)
    2. Enabled WoW64-ServerCore, WoW64-NetFx2-Support, WoW64-NetFx2, WoW64-PowerShell
    3. Installed Windows Management Framework 4.0  (Windows6.1-KB2819745-x64.msu)
    WMF installation shows that it was successful ("Windows update "Update for Windows (KB2819745)" was successfully installed.")
    However when I restart the server following shows up on the event log ("Package KB2819745 failed to be changed to the Installed state. Status: 0xd00000bb.")
    This same process work on Server 2008R2 full version.
    Has anyone seen this before?

    Hi Aka Nugawela,
    The .NET Framework 4.5 and its point release is supported in the Server Core Role with 2008R2 SP1 or later, could you try to install SP1 then try again.
    The related KB:
    .NET Framework System Requirements
    https://msdn.microsoft.com/en-us/library/8z6watww(v=vs.110).aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to install solution manager

    Hi Folks, I'm new on SAP and getting problems to install SAP Best Practices Baseline Package PT V1.603. It asked me some dependencies and for download them it goes to the Approval List, means waiting for approval so to approve them to download i need to do it trough Solution manager and i don't have it on my SAP. When i go to the  transaction dswp it shows nothing.
    How can i install the Solution Manager to be able to download the dependencies for my BP.
    best regards.
    Nelson Chamba

    Hi Nelson,
    go to https://websmp201.sap-ag.de/support
    then in 'Downloads' section go to 'SAP Installations & Upgrades', click on 'Installations and Upgrades - Entry by Application Group'
    In entry 'SAP APPLICATION COMPONENTS' you ll find 'SAP Solution Manager'. There you ll find Installation Guides for Solman
    All you need is there !
    You ll also need the DVDs; they are downloadable on service.sap.com in the Software Distribution Center
    Hope this helps
    Regards
    Khalil

  • How to install Oracle Management Server

    Hello Guys,
    I have installed oracle database9i on my computer now i want to configure Oracle Management Server. Please advice how to do it.
    Like when i start Enterprise Manager Console there are 2 options to Launch Standalone or Login to Management Server.
    I want to logon to Oracle Management Server.
    Regards,
    Imran

    You must create an OEM repository, and configure the OMS accordingly. From your start menu, you will find the Oracle Home Products menu -> Configuration and Migration Tools -> Enterprise Manager Configuration Assistant
    The emca is the graphical assistant tool you launch to perform oms configuration. It is recommended to create the repository in its own database.

  • How to install Enterprise Manager to JDeveloper integrated Weblogic domain

    I have installed JDeveloper 11g and as you know it also installs an embedded Weblogic and creates a Weblogic domain. This domain by default has the console application but does not have the em application. How can I add em to my integrated Weblogic?

    Sturla,
    I can give you the quick steps for installing EM into the WLS container integrated with JDev:
    1). Download from OTN two pieces of software from the Fusion Middleware 11g (use the "For Deployment" software, click "See All"): the Application Development Runtime, and (under Additional Required Software) the Repository Creation Utility (RCU).
    2). Unzip the RCU and run bin/rcu.bat or bin/rcu (windows/*nix). Create the MDS repository in an Oracle DB using this utility.
    3). Install the application development runtime into the same home you installed JDeveloper.
    4). Run the configuration wizard - on Windows its in the start menu / Oracle Fusion Middleware 11.1.1.1.0 / Weblogic Server 11gR1 / Tools. Find it yourself on *nix ;)
    5). Choose to extend a domain
    6). Pick your DefaultDomain directory for the integrated WLS
    7). Tick the checkbox to add enterprise manager
    8). Supply the database connection information for the DB in which you created the repository in step 2.
    Ta-da!
    The EM will be accessible via http://hostname:7001/em, username/password=weblogic/weblogic1. I will caution you about generically installing into the integrated domain - it makes your WLS take noticeably longer to start up...
    Best,
    John

  • How to install a managed weblogic server ?

    Hello,
    I am new to weblogic server installation.
    I have spent a few days reading the installation document.
    I have installed a default server successfully, and I want to install a new
    machine
    running as a managed server.
    The BEA installation guide didn't explain clearly how a new managed is to be
    installed.
    Do I need to use the same procedure: download the installer from bea
    website, then
    create a bea home directory on the new machine, and create a new product
    directory
    on the new machine ?
    What about the license on the new managed server ? Do I need a separate
    license.bea
    installed on the new managed server ? Since I need a new managed server, it
    should
    have its own BEA home directory, its own product directory, and it own
    license.
    Am I right on this ?
    Thank you for any information that can help me.
    Regards,
    Frank Hsu

    Frank,
    You will need to install the software on each machine, unless you are using NFS
    mounts. Each machine will need its own license, and the entries can be in the
    same license.bea file that is shared across all machines.
    Thanks,
    Simon
    Cheng Chung Hsu wrote:
    Hello,
    I am new to weblogic server installation.
    I have spent a few days reading the installation document.
    I have installed a default server successfully, and I want to install a new
    machine
    running as a managed server.
    The BEA installation guide didn't explain clearly how a new managed is to be
    installed.
    Do I need to use the same procedure: download the installer from bea
    website, then
    create a bea home directory on the new machine, and create a new product
    directory
    on the new machine ?
    What about the license on the new managed server ? Do I need a separate
    license.bea
    installed on the new managed server ? Since I need a new managed server, it
    should
    have its own BEA home directory, its own product directory, and it own
    license.
    Am I right on this ?
    Thank you for any information that can help me.
    Regards,
    Frank Hsu

  • Missing on Users end: How to install Font Manager.IndesignPlugin. Indesign_CC

    I installed Indesign CC on the admin side of my computer. It seems to open/work fine there but when i login as a user on the computer, it won't open Indesign because it claims it is missing the Font Manager.IndesignPlugin. It originally said it was also missing the Character Panel.IndesignPlugin but I copied and pasted it from the admin to user's plugin folders. That seemed to fix that issue. But, doign find/searchs of the file name on both the Admin side and users side, i I am unable to even find the plugin. Why is this happening and where can I find this?
    So very frusturated. This is all after I've installed/uninstalled this 4 times already today because of other issues.
    Thanks!

    Can you show me where I can find the answer to this I am havng the same issue and I can't find where this discssion was  moved to

  • How to install the management packs in OEM.

    Hi,
    I need to install the OEM with Management packs for a customer on windows. Now i have installed the OEM 11g on one server and installed the agent where ever required. Now i am able to do basic moniotoing with any issue. Now i need to install following packs as a part of the contract. Could any body help me to do the same?
    ================
         Diagnostics Pack.
         Tuning Pack.
         Change Management Pack
         Provisioning and Patch Automation Pack for Database & Management Pack Plus for Identity Management.
         Application Management Pack for E-Business Suite.
    ================
    Regards
    DBA.

    Database Provisioning and Patch Automation Pack
    Automates deployment of software, patches and servers. This pack provides functionality for provisioning of operating systems and software images, cloning of existing installations and software images on both bare-metal and live machines, and patching. Sizeable decreases in person-hours and costs can be achieved by using mass provisioning and patching, offering an easily quantifiable return on the investment of this management pack. Key features include the following:
    - Extensible, out-of-box best practice Deployment Procedures for provisioning and patching
    - Database and Oracle Home cloning
    - Database, RAC Extend Cluster and Add Instance-Single instance-to-RAC conversion-Bare metal provisioning (i.e. Linux)
    - Automated patching for the Oracle Databases and underlying operating system (i.e. Linux, Solaris, Windows)
    - Software Image Library
    - Deployment Procedure Manager
    - CLI driven runtime
    - Critical Patch Facility
    - Enterprise Security Advisory
    - Provisioning and deployment reports
    Standalone Provisioning and Patch Automation Pack
    Automates deployment of software, applications, and patches. This pack provides functionality for bare metal provisioning of operating systems and software images, cloning of existing installations and software images (such as CRS/RAC and AS), and patching. The Standalone Provisioning and Patch Automation Pack includes:
    - Software Image Library
    - Database and Oracle Home cloning
    - Database, RAC, Application Server, and Application provisioning
    - Extend Cluster and Add Instance
    - Single instance-to-RAC conversion
    - Bare metal provisioning
    - Deployment Procedure Manager
    - Automate patching (including staging) for Oracle software, Oracle Homes and operating systems
    - Critical Patch Facility
    - Enterprise Security Advisories
    - Provisioning and deployment reports
    Regards
    Rob
    http://oemgc.wordpress.com

  • How to Install Access Manager on Linux

    Has anyone installed Oracle Access Manager on Linux.
    When I unziped file I did not get "Setup" instead got a file
    Oracle_Access_Manager10_1_4_0_1_linux_Identity_Server
    when I ran $./Oracle_Access_Manager10_1_4_0_1_linux_Identity_Server
    I am not getting GUI installer
    Thanks

    try running the installer with -gui key

Maybe you are looking for

  • Unable To Get Lab view vi to display current signal

    I am using a Vishay Linear Displacement Transducer to measure linear displacement, this is how my current connections are ( The Vishay LVDT allows full bridge connections) 1. I coonected the wires from the LVDT to SCXI 1321 terminal block. The termin

  • I recently updated my iphone 3GS and lost everything - does anyone know how to get my contacts back, notes, calender etc?

    I recently updated my iphone 3GS to iOS 5.0.1 software.  After this was completed everything had been wiped from phone, all photos, apps, contacts, notes, calender. emails, music and settings.  itunes wouldnt recognise my phone afterwards, but I have

  • Normal.dot overwrite error

    I've been using RoboHelp for years, but with RoboHelp X5 and Microsoft Word 2003, every time I've attempted to create a printed document from a RoboHelp HTML project, I get prompted by Microsoft Word to overwrite my existing Normal.dot stylesheet. De

  • How can I get rollover text to show pictures?

    The original flash has a publish setting to Flash Player 5, and I have to have the publish setting set to Flash Player 8 (actionscript 2). The original flash works with the Flash Player 5 setting however when I change it the rollover text to picture

  • Placing PSD file as a button

    When I try and place a Photoshop file (made with normal and rollover layers) as a button in a Muse document, I get an error message: "Cannot place file. File was saved with compatibility turned off". Ive resaved the file from Photoshop after checking