How to install first forest and active directory on the windows server 2012 R2 core?

hi to all
i installed a windows server 2012 R2 Core edition on the server platform and i want install first forest and Domain on this server core by cmdlet...but i cannot install it. i search in the technet and other sites and blogs on the internet
and i saw many commands that use for install it such as "DCpromo /unattend" and even
"Install-addsforest" in the powershell but still i cannot get a result from these commands.
i need step-by-step guide that help me for install new forest and domain in the server 2012 R2 core.
thanks a lot friends

C:\PS>Install-ADDSForest
-DomainName mydomain.local -CreateDNSDelegation
-DomainMode Win2012 -ForestMode Win2008R2
-DatabasePath "d:\NTDS"
-SysvolPath "d:\SYSVOL"
-LogPath "e:\Logs"
you can use above example
Darshana Jayathilake

Similar Messages

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul Edwards

Hi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is ATG 9.x and 10.x compatible with Windows Server 2012?

Is ATG 9.x and 10.x compatible with Windows Server 2012?

No, its not supported. Only Window 8 is supported.
Peace
Shaik

Uninstall Active Directory from DC (Win server 2012 Core)

Hello All,
How can I uninstall Active Directory from the additional domain controller that runs WS 2012 Core. Which tool should I use?
Uninstall-addsdomaincontroller
Uninstall-windowsfeature
Remove-windowsfeature
ntdsutil

Hi Kaoizm,
You can refer the following article:
Demoting Domain Controllers and Domains (Level 200)
https://technet.microsoft.com/en-us/library/jj574104.aspx?f=255&MSPPError=-2147217396
What is the simplest command line to dcpromo *down* a Server Core machine?
http://blogs.technet.com/b/migreene/archive/2008/04/25/3045099.aspx
More related third party article:
Demote Server Core Domain Controller (2012)
http://blog.allford.id.au/2014/demote-server-core-domain-controller-2012/
Safely Demote a Windows 2008/r2 Core Domain Controller
http://blog.ittoby.com/2013/06/safely-demote-windows-2008r2-core.html
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
Thanks a lot!!!
I'm desperated!!

Hi,
reply to my own question:
In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
- Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
or
- Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
So I'll give it a try with 10g database server ;-)))
Regards,
Thomas Heß

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
    opmnctl task failed
    Step Executing: opmnctl start coreapplication_obisch1 failed
    Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..

Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

How to work with oracle and active directory...

Hi,
Can somebody let me know how do i configure active directory with oracle 10g?
I am trying to do this using configuration wizard but fields are grayed out for me to proceed. It also shows me to prepare active directory to work with oracle first.
How do i do that?
Can someone let me know the steps to do so?
Regards
Vikas

Depends on what you want to achieve?
Usually when you want Enterprise Users (users that are managed by a directory instead of a schema) you will perform other steps than in a scenario where you need some attributes from the AD.
cu
Andreas

Cannot install Active Directory Domain Services on Server 2012 R2

Hi all,
I'm having some trouble installing the AD DS role onto my virtual server. I keep getting "The request to add or remove features on the specified server failed. The operation cannot be completed because the server that you specified requires a restart."
After the install fails the DFS Namespace service stops and I cannot refresh the server manager.
This server is currently dishing out DHCP and also has VIPRE anti virus on it.
I did a ton of research on the problem but can not find anything specific to this issue.
Any help would be greatly appreciated. Thanks!

Hi Dave,
I ran the DISM.EXE/Online/Cleanup-image/Restorehealth command and Windows did not find any corruption.
I then attempted to install active directory and was greeted with the same errors as I expressed in my first post.
I ran the DISM.EXE/Online/Cleanup-image/Restorehealth command again and windows found corruption and fixed the corruption.
I tried to install active directory again (was able to refresh the server manager at this point and did not need to reboot the server to attempt another install, maybe that is the corruption windows fixed?) but it failed.... with the same errors I always
get.
The active directory install always freezes on 64% and then bombs out.
I shutdown the VM and rebooted... before the login screen Windows attempts to configure updates but fails. Could this be the cause?
Thank you,
-Matt

Cannot install Windows Azure Active Directory Sync tool on Server 2012 w/ SQL Server 2012

I went to change a user password on the server today and after changing the password I logged into the SQL server to run “Import-module dirsync” & “Start-onlinecoexistencesync” in powershell in order to sync the new password with Exchange Online. After
waiting ten minutes I tried setting up the email on the user’s PC but the new password was not being accepted. I logged into Office 365 and I got the following warning.
"Warning: Last synced more than 3 days ago | Troubleshoot"
So I pressed troubleshoot and the site installed a tool on the server to try and find out what the issue was. After the tool ran it told me that the version of dirsync.exe was out of date and that I should download the new one and install it. So I downloaded
the new dirsync.exe (version 7020 I believe) and tried installing it. I kept getting error after error, different ones to boot.
First it told me I wasn’t part of the FIMSyncAdmins group (so I added myself), then it told me that it could not connect to MIIS server, so I tried starting it and windows said that there was a problem with the sign on used by the service so I had
to reset the password for the local user named “AAD_bfd1d6f0cef7” which was being used by that service. The service started successfully and when I went to install it told me I could not and if the problem persisted I should uninstall the old version and reinstall.
Looking in the log file, before I even install the software I see the following Information...
Level: Information
Date: 2015-03-24 12:49:17 PM
Source: Directory Synchronization
Event ID: 0
Task Category: None
"The current configuration of the Windows Azure Active Directory Sync tool is invalid. Please reinstall the Windows Azure Active Directory Sync tool."
So I tried to reinstall (i even manually uninstalled the old version and removed the folder in C:\Program Files\ called "Windows Azure Active Directory Sync") and on reinstall I get as far as "Installing Components" and then after a little
while it errors out with the error "The install was unable to setup a required component. Check the event logs for more information. Please try the installation again and if the error persists, contact Technical Support. "
Looking at the log file there are a bunch of new entries, created by the installer. There's over 300 new entries and I can not post them all here due to character count restriction. you can find the log file here...
www.clarkfreightways.com/wp-content/uploads/2015/03/dirsync_log.txt
Can anyone tell me what is going on, I've been looking through the log files and I can see errors but I'm not sure what to do to fix it.

Greetings!
Wanted to know if you've hosted the DirSync tool (latest version) on a VM? Also, if this is deployed in a Production or Lab environment? If it's a lab setup, you may
try installing the DirSync on a new VM / Server (suspecting that it could be some machine related issues).
Here's a Support KB helping with different errors:
http://support.microsoft.com/en-us/kb/2684395
If its a production environment, would suggest to raise a
Technical Support Ticket for assisting further with break-fix.
Thank you,
Arvind

How to Install oracle workflow and why we need Oracle Application Server

I want to install and configure Oracle Workflow using Oracle 10g
Please help me and guide me with the process in deatial from scratch what should i need to install
Oracle Database
Oracle Application server middle tier
Oracle Content Management SDK
Also help me how can i configuer oracle internet directory because when installing Oracle application server it requires HostName and Port No.
I am a student
I know just how to install oracle database 10g
and New to oracle Application Server
Waqar Habib

The files at
http://otn.oracle.com/software/products/ias/workflow/htdocs/winsoft.html
are for Oracle Workflow version 2.6.0. Here is some information from the announcement for downloading the latest version, 2.6.3:
Oracle Workflow 2.6.3 for Oracle Database 10g is now available for download from OTN.
Please point your browsers to http://otn.oracle.com/software/index.html
Currently, the availability is limited to Windows and we are working towards availability on other platforms. I will post another message as soon as it becomes available.
The Workflow Server requires an Oracle 10g database home and the Workflow mid-tier requires an Oracle HTTP Server home - Apache Install from the Oracle 10g Companion CD. For more information please read the installation notes.

Active Directory not working Windows Server 2003 R2

Hi,
Like the subject said my root problem is either my Active Directory or DSN server. In order to properly explain the situation I will have to make the full Story. I was contacted by a family member to help
out a Non profit organisation with there server problem. Their current config is Windows Server 2003 R2 Running DC,AD,DNS,DCHP,File Services( i know is not efficient).
Here is how I come in to play, prior of me helping the had another server running same spec started having hardware failure and the invested in a new server. The person that set it up did replicate the server
on the new one as far as AC and Domain controller but nothing else. We ll now the DC01 failed and no user cannot login into a new computer
or if a new employee will try to added the changes don't take effect. Seeing the situation I went for the basic and seize fsmo roles to the new server. Perform Metadata clean up. Configure the DC02 as Master Domain Controller. Now everything
is set up and running but still No new user can be added or any exiting can log in
a different computer. At this point am out of answer I try everything I found in the forum. Am almost to the verge of deleting all and start
from scratch me knowing all config. Sorry for the long story am not good on resuming stuff. Please let me know If I need to add any other detail
I repeat DC01 is DEAD...
Also when a new user try to login or an existing user try to loging they get the system cannot log you on now because the domain is not available

Not Sure if this is the info requested but I ran the commands
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\administrator.LUTHERAN>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : dc02
Primary Dns Suffix . . . . . . . : Lutheran.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Lutheran.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #45
Physical Address. . . . . . . . . : 00-1C-23-BF-E6-69
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.6
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DNS Servers . . . . . . . . . . . : 192.168.100.6
Primary WINS Server . . . . . . . : 192.168.100.6
C:\Documents and Settings\administrator.LUTHERAN>
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : WINS Client(TCP/IP) Protocol
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Internet Protocol (TCP/IP)
Bind Name: Tcpip
Binding Paths:
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Client for Microsoft Networks
Bind Name: LanmanWorkstation
Binding Paths:
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: Client for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WebClient
Bind Name: WebClient
Binding Paths:
Component Name : DHCP Server
Bind Name: DHCPServer
Binding Paths:
Component Name : Wireless Configuration
Bind Name: wzcsvc
Binding Paths:
Component Name : Network Load Balancing
Bind Name: Wlbs
Binding Paths:
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Component Name : Steelhead
Bind Name: RemoteAccess
Binding Paths:
Component Name : Dial-Up Server
Bind Name: msrassrv
Binding Paths:
Component Name : Remote Access Connection Manager
Bind Name: RasMan
Binding Paths:
Component Name : Dial-Up Client
Bind Name: msrascli
Binding Paths:
Component Name : File and Printer Sharing for Microsoft Networks
Bind Name: LanmanServer
Binding Paths:
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Generic Packet Classifier
Bind Name: Gpc
Binding Paths:
Component Name : Application Layer Gateway
Bind Name: ALG
Binding Paths:
Component Name : NetBIOS Interface
Bind Name: NetBIOS
Binding Paths:
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WAN Miniport (IP)
Bind Name: NdisWanIp
Binding Paths:
Component Name : Direct Parallel
Bind Name: {A4DC6983-452B-41F9-B696-5112E5E6F1C6}
Binding Paths:
Component Name : WAN Miniport (PPPOE)
Bind Name: {5B69EEC5-2676-460B-9E03-F38B02BA4474}
Binding Paths:
Component Name : WAN Miniport (PPTP)
Bind Name: {DEE98315-C28A-4CC8-9233-E6C3506C16D3}
Binding Paths:
Component Name : WAN Miniport (L2TP)
Bind Name: {9BFC4E35-93B2-4811-8A56-69149ED0837E}
Binding Paths:
Component Name : RAS Async Adapter
Bind Name: {50239872-7742-4BB5-A28E-0B814085C2A6}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #48
Bind Name: {19218099-5DDC-4936-A111-75E4D7250A24}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #45
Bind Name: {52BE526E-7FAE-4458-9691-E333DA333601}
Binding Paths:
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
C:\Documents and Settings\administrator.LUTHERAN>

Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
The server is brand new and it's a fresh install of Apache and ColdFusion 9.
Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
On closer examination of the Windows error log, I saw the following error:
The Apache service named reported the following error: >>>
httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
Any help would be much appreciated. I have spent hours trawling the Web for solutions.

I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
OK. Simple solution to this. I'll put it here for other peoples' reference.
To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
Hope this helps someone else out.

Active Directory Error 0x51 occurred when trying to check the suitability of server ' servername '. Error: 'Active directory response: The LDAP server is unavailable'. It was running the command 'Get-OwaVirtualDirectory'.

This issue is driving us nuts - there are no issues with Domain Controllers or AD in this environment. The server it is citing in the error has been retired - it was gracefully dcpromo'ed down and removed from the environment. DNS has no record of it, nor is it located anywhere else. We are not able to log into Outlook Web App either with authentication failed errors - and I can't help but expect these 2 issues are related? I tried hard coding the Configuration Domain Controller at the org level, as well as using the -staticdomaincontrollers and -staticglobalcatalogservers with the "Set-ExchangeServer" powershell command - no luck.... System settings of the exchange 2010 servers show they are pointing to the correct DCs - but I still get this error accompanied with long delays in rendering windows in EMC. Extremely frustrating..... I have an issue logged with MS now, but they aren't looking at them until Nov 9. Has anyone seen this issue at all? More info on the OWA config - using Form based auth, and I'm not able to perform a simple test-owaconnectivity -mailboxcredential (get-credential\username) -allowuntrustedcertificate -allowinsecurelogon - please help

Create a "global catalog" on the 2nd domain contoller, will fix this problem.
To create a new global catalog:
On the domain controller where you want the new global catalog, start the Active Directory Sites and Services snap-in. To start the snap-in, click Start , point to Programs , point to Administrative Tools , and then click Active Directory Sites and Services .
In the console tree, double-click Sites , and then double-click <var>sitename</var> .
Double-click Servers , click your domain controller, right-click NTDS Settings , and then click Properties .
On the General tab, click to select the Global catalog check box to assign the role of global catalog to this server.
Restart the domain controller.

How to install HR Global patch For R12.1.1 windows server 2003?????

Dear Friends
can any one help me to install patch HR Global patch For R12.1.1 windows server 2003,
i have R12.1.1 Vision but the payroll not working so i need help,i am not DBA,please
any one can help me to tell me step by step ,or if any one have good document to share it for me.
Thanks
Omar

can any one help me to install patch HR Global patch For R12.1.1 windows server 2003,
i have R12.1.1 Vision but the payroll not working so i need help,i am not DBA,please
any one can help me to tell me step by step ,or if any one have good document to share it for me.Please see these MOS docs.
Note: 145837.1 - Latest HRMS (HR Global) Legislative Data Patch Available
Note: 307195.1 - Example - Running DataInstall and Applying hrglobal.drv
Note: 734910.1 - Can You Run Hrms Datainstall and Apply Hrglobal.Drv Once for Several Legislative Patches
Note: 300097.1 - Oracle HRMS HRGLOBAL Basics
Note: 140511.1 - How to Install HRMS Legislative Data Using Data Installer and hrglobal.drv
Note: 188698.1 - HRMS: On What Server Do I Run The Datainstall Utility And Hrglobal.Drv
Apply the hrglobal.drv patch using adpatch -- https://forums.oracle.com/forums/search.jspa?threadID=&q=how+to+use+apply+patch&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to install first forest and active directory on the windows server 2012 R2 core?

Similar Messages

Maybe you are looking for