How to Install IHAT10.1.3 for both command line and web

Hi,
I am trying to install iHAT10.1.3 onto my linux x86 machine. However the instruction I am following in the README is not working for me. Can anyone give me an example of how to install and view iHat for command line and the web
Cheers
Jat

What stage during the instructions are you encountering problems. Can you provide the error details if any?
The 10.1.3 iHAT is only Web based using Flash at the client for displaying compopnents. Unlike the old iHAT, there is not thick client provided to invoke from the command line.
null

Similar Messages

How can i run AirPort Express for both a Mac and Windows 2000 SP2?

I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
They were running XP SP2.
Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
Good luck
susan
iBook G4 Mac OS X (10.3.4)

How to install firefox 36.0 silently thorugh command line? I tried with -ms switch but still it prompts the user. Please help

I have been using these commands to push Mozilla to client computers and it worked fine so far however now it is not working.
I treid following command however it prompts the user to install/upgrade instead of installing silently.
"Firefox Setup Stub 36.0.exe" -ms /qn /norestart
Please help!!!

Hi vparmar,
We recommend installing Firefox in a traditional way to avoid any further problems or conflict with the system. [[How to download and install Firefox on Windows]]
Thank you.

Question on list of value for both of deski and webi

Hi,
I have two questions on list of values issue: (we are using boxir3.1)
1) on the deski, when I click on the Values on the 'Enter or Select Values' prmopt, the list of value it shows is not what it should be, it is pointed to other object, for expense, the value should show department code but the list of values shows the company name. I did refresh, and also refreshed on the universe side: restored default, automatic refresh before use. then export the universe, still doing the same. the only way to correct it I found so far is to change the prompt text which I don't prefer (we used userresponse in the report, it will be too much to change.
2) for the webi report, when I click on the 'Refresh Values' on the prompts page, it shows (No value). I also checked on the universe side, did restored default, automatic refresh before use. then export the universe, still doing the same.
Please help,
Thanks,
jt

Try a new universe on the same connection, build the same objects. Just something simple to test the LOV results. If it doesn't work, it could be a data issue, or a permissions issue as suggested.
You should check the SQL created for the LOV in the universe and verify that it's going to the right place.
You can check to see if there is another LOV using the same name and if so, change it. The LOV name is found on the properties tab. You can find the LOV in the universe folder as a sub-folder from your environment. In my case, I have a folder named @Dev and a folder for universes inside that, then a folder beyond that with the universe name that contains the LOV files. Find the one in question and delete it, ensuring that it gets recreated.
Try making sure that any unv and lov files on your server are purged. You may also need to test cache testings. The easy way to test if it's a cache issue is to reboot your system, which should clear the cache.

How do I install bootcamp so I half both my ssd and hdd?

How do I install bootcamp so I half both my ssd and hdd for windows and lion?

Sorry about that one. There are THREE not just two, about SSDs, and the iMac SSD + hdd one.... well that one was private (not sure why).
Most questions have been asked/answered, multiple more than once, times, and therefore: public bookmarks and search please. (some gets asked almost daily, a few multiple times in one DAY of all things).
I'd like to see pdf guide and error messages, faq and how to articles re-written, updated, and checked for errors.
www.apple.com/support/bootcamp is where I usually send people to seek out the pdf and do some readiing and backups. you will need backup no matter what.
Windows won't install iwth two drives/devices with GPT so you have to remove or reformat the data drive for now.

I have one apple ID for my MAC and another used for both my iPhone and IPad. Purchases from iTunes don't appear on either my iPhone or iPad only only the MAC. How do I sync the two IDs?

I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad. When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad. Neither lets me change my ID so how do I fix this issue so I can play the music on all three?

Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G.

HT1918 How do i change my username to another when they both have accts with itunes one is on my computer and one is on my ipad? Two different e-mail address that are both mine....so how do i make one acct for both?

How do i change my username to another when they both have accts with itunes one is on my computer and one is on my ipad? Two different e-mail address that are both mine....so how do i make one acct for both?

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

How do I use the same Itunes for both my IPOD and IPAD?

How do i use itunes for both my ipod and ipad? and have everything on both of them.

You can connect one of them to your computer's iTunes, select it on the left-hand side of iTunes, and then on the right-hand side select the Music tab and choose what to sync to that device - you can then connect, select and sync the same content to your other device.

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to install adobe flash player for microsoft rt surface

how to install adobe flash player for microsoft rt surface

Should already be enabled in IE on Win 8 RT
http://blogs.msdn.com/b/ie/archive/2013/03/11/flash-in-windows-8.aspx

Where to download and how to install X Window System for Oracle Linux 5 ?

Folks,
Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
But I don't know where to download and how to install X Window System for Oracle Linux 5.
Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

You can address the problem in a number of different ways.
You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

So when I plug my iPhone 3GS into my iMac, for music reasons, it says I have 123 songs. When I plug my iTouch into my iMac it says I have 565 songs on my iTouch. I have the same apple idea for both my iPhone and iTouch, how do I transfer my 565tomyiphone

So when I plug my iPhone 3GS into my iMac, for music reasons, it says I have 123 songs. When I plug my iTouch into my iMac it says I have 565 songs on my iTouch. I have the same apple idea for both my iPhone and iTouch, how do I transfer my 565 songs on my iTouch to my iPhone? PLEASE HELP!!!

When you connect your iPad or iPod to the Mac, click on the device name in iTunes - don't click on the arrow on the device. Then click on the Music tab in the main window pane. Now you should see 'Sync Music' and all your playlists, artists and albums. Here you mark the checkboxes for what should be synced.

After I updated to yosemite my iMovie will not open. I have found the folders in the applications for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?

After I updated to yosemite my iMovie will not open. I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

How to install the live cache for oracle DB

Hi,
How to install the live cahe for the oracel DB.
We had the SCM Dev system with oracle database.Now we are planning to install the live cahe on the same DB.Is it possible?
Plz give the appropriate steps.
Regards,
Siva.

Thanks for your response.
i understood that live cache is a product it will be applicable to any DB's.
i need to install the live cache from the existing system(Running with oracle DB)
Plz guide the procedure.
Am I going in a wrong direction?Plz guide.
Thanks,
Siva

How to install the Workflow Manager for 10g ?

how to install the Workflow Manager for 10g ?
where can I find the information ?

Ting,
When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
Cheers,
Raja

How to Install IHAT10.1.3 for both command line and web

Similar Messages

Maybe you are looking for