How to Install OBIEE in Sun Solaris 64 Bit OS?

Dear All,
Is any one can help me with screen shot on Installation of OBIEE in Sun Solaris 64 Bit (version 10) OS. OBIEE Version 10.1.3.4
Also required a check list of Pre-Installation mandate requirements.
Thanks & Regards
OBIEE Functional Consultant

OBIEE documentation: http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm where you can find the System Requirements and Supported Platforms guide and the installation guide.
Regarding screen shots: http://catb.org/esr/faqs/smart-questions.html#homework
PS: I wouldn't call myself an "OBIEE Consultant" if I couldn't find the OBIEE documentation or needed screen shots to install OBIEE.

Similar Messages

  • How to start OC4J in Sun Solaris???

    How to start OC4J in Sun Solaris???

    It's very simple, you go to the OBIEE documentation page:
    http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_booklist.htm
    And you download the Infrastructure Installation and Configuration Guide. You then read it and get to the section where if talks about Starting and Stopping the OC4J Process.

  • How to install OpenGL files on Solaris 10

    I found OpenGL stuff is missing from the Solaris 10 system when I installed gtkglext from its source code and got an error after the 'configure' command.
    bash-3.00$ ./configure
    checking GL/glx.h usability... no
    checking GL/glx.h presence... no
    checking for GL/glx.h... no
    configure: error: Cannot find GLX header
    I remember that for software groups during Solaris 10 installation, I did choose the Entire Solaris Software Group to guarantee the developement packages are installed. Could you give some help on how to install opengl stuff from Solaris 10 installation disks?

    It's hard to believe that no one here (official Sun
    developer network) can answer my question. Maybe few
    people develop under Solaris.That must be it.

  • How to install lan card in solaris 11

    Hi,
    can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
    When i do ifconfig -a it only displays loop back driver only
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    The other driver was missing can please some one tell me how to install that?

    Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
    http://www.oracle.com/webfolder/technetwork/hcl/index.html
    There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

  • How to installed java comm in solaris

    I have installed borland jbuilder5 enterprise edition,and
    put the libSolarisSerialParallel.so in LD_LIBRARY_PATH
    (LD_LIBRARY_PATH=/usr/lib), the comm.jar in jre\lib\,javax.comm.properties in jre\lib .
    But when I Open the serial port, the program always raise a exception "null".
    What can i do ?

    sorry :
    how to "installed" java comm in solaris
    --->
    how to install java comm in solaris

  • I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

    I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
    Please help me how to install mac drivers for windows7 64 bit???

    You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
    General Help:
    Boot Camp 4.0, OS X Lion: Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    Installation Guide   Instructions for all features and settings.
    Boot Camp 4.0 FAQ   Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ   Answers to commonly asked Windows 7 questions.
    - support articles and tips, how to.
    http://www.apple.com/support/bootcamp/
    Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
    http://support.apple.com/kb/HT1846
    Step 4: Install the Boot Camp Drivers for Windows
    After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc.  The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard. 
    The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
    To install the Boot Camp drivers:
    1 Eject the Windows installation disc.
    2 Insert the Mac OS X disc.  If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
    3 Follow the onscreen instructions.
    If a message appears that says the software you’re installing has not passed Windows  Logo testing, click Continue Anyway.
    Windows that appear only briefly during the installation don’t require your input.
    If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
    Important: Do not click the Cancel button in any of the installer dialogs.
    4 After your computer restarts, follow the instructions in the Found New Hardware  Wizard to update your software drivers (Windows XP only).
    5 Follow the instructions for any other wizards that appear.
    6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
      If You Have Problems Installing the Device Drivers 
    If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
    To repair Boot Camp drivers:
    1 Start up your computer in Windows.
    2 Insert your Mac OS X installation disc.
    3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
    4 Click Repair and follow the onscreen instructions.
    If a message appears that says the software you’re installing has not passed Windows  Logo testing, click Continue Anyway. 
    If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
    Individual drivers are in the Drivers folder on the Mac OS X installation disc.

  • How to install itune under Windows XP 64-bit professional with SP2?

    I have iPhone 3GS for over a year and I have set it up at my work computer (Windows XP professional) with latest iTune and it work great. Recently our IT has upgraded our system and all of our new machines has Windows XP 64-bit OS.
    I can't figure out how to install iTune under Windows XP 64-bit, to synch with my e-mail, contact and calendars any more?
    Can any one help?

    New machines? With XP 64-bit? Your IT department is being rather foolish, in my opinion, deploying new installations of XP 64 since Microsoft discontinued mainstream support for it (more than two years ago) and it's never really been satisfactory.
    Anyway, there is no version of iTunes that supports the 64-bit version of Windows XP and almost certainly never will be. If you search the iTunes for Windows forums for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete. Connecting to iPhones is one of the most problematic issues.
    Regards.

  • Can't download Oracle 9i Database Server for SUN Solaris 32 bit platform

    I was not able to download Oracle 9.2.0 DB Server for Sun Solaris 32 bit platform from OTN site this morning. Could someone please take a look at it?
    Thanks,
    Wen Davis

    At this time, Oracle is offering only the 64- bit and we do not
    have additional information if in the future 32-bit will be
    offered.
    Best Regards,
    OTN Team

  • How to install 3c905c NIC in Solaris 8 in SPARC platform

    i bought a 3c905c NIC. I want to install it into SUN Blade 100 (SPARC platform) Solaris 8. I do need help how can I configure this NIC?tks.

    From what I have seen the SPARC based systems don't have drivers for anything other than Sun hardware. I am presently working on a 3C90x and Intel Pro/100 driver for the Ultra Sparc series.
    James

  • Help!! How to install and use Sun ONE Directory Server Resource Kit 5.2

    Hi ! Friend:
    I have some problem on install and use Sun ONE Directory Server Resource Kit 5.2, when I execute "java DSRK", afterwards something like this : com.iplanet.install.until.wbResource::gerstring:resource bundle"locale.resources.S1DSRKResource" not found appeared in the window ,that's why?
    Meanwhile ,can you give some data about it on how to use it ?
    Thank you !

    You should be aware of the following characteristics of your directory when using this tool:
    Size and number of entries.
    Directory structure and access permissions.
    Virtual attributes, class of service, and indexing.
    Usage, types of access, and access patterns.
    Post your error messages completely.
    Thanks
    --Britto                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to configure tape to sun solaris server?

    Hi
    We have a tape "Quantum Super DLT 600 tape drive" connected to Sun solaris 9 and working properly.
    Now we want to connect and configure it to Sun solaris 10 server. I want to know how we can do it?
    I checked in st.conf file , "#tape-config-list=" is commented in both solaris 9 while in solaris 10 it is not there.
    I think i will just have to connect the tape to new srver(solaris 10) and do a reconfiguration boot. Right??
    Also, what do i need to do for connecting the tape back to solaris 9 server.
    Thanks

    You really don't need to reboot the server. Connect the tape to the server and type devfsadm -Cv. Then type dmesg and check whether Solaris detect the tape or not.
    if not do a reboot and see.
    after doing one of above, insert a tape to the tape drive and type "mt stat" and see you got any output about a tape.
    Refer Solaris 9 and Solaris 10 System Administration Guides.
    Edited by: Thusith.M on Jul 31, 2009 9:24 AM

  • How to install puppet agent on solaris 10 sparc

    I would like to know how to install and configure puppet on solaris 10 sprc

    Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS.   That permits you to make very specific settings and not just generic global settings that could conflict with other software.
    Can you tell us what research you have done on the topic? 
    For example, have you glanced through a Google search on "solaris web proxy" ?
    If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space.   What application software will you be using?

  • How to create obiee repository in solaris

    hi,
    I am trying to create obiee repository in obiee under solaris environments. i have find out that there is no administrator tool for obiee under solaris. How can i create repository in solaris if there is no administration tool.
    Kindly help
    regards
    Nick

    here is my instanceconfig.xml file and i have changed it path
    <WebConfig>
    <ServerInstance>
    <DSN>AnalyticsWeb</DSN>
    <CatalogPath>/u02/software/OracleBIData/web/catalog/birepository</CatalogPath>
    I have place the fold copied from the window in catalog but here is NQServer file out put
    2009-04-09 16:23:19
    [14058] Unloaded all subject areas.
    2009-04-09 16:23:25
    [36007] Loading repository /u02/software/OracleBI/server/Repository/samplesales.rpd.
    2009-04-09 16:23:26
    [14055] Loading subject area: Sample Sales ...
    2009-04-09 16:23:27
    [14056] Finished loading subject area: Sample Sales.
    2009-04-09 16:23:27
    [58002] Query Cache loaded with 0 entries from saved cache files.
    2009-04-09 16:23:27
    [43030] : Oracle BI Server started. Version: 10.1.3.4.0.080726.1900.
    its still loading the samplesales.rpd why?
    regards
    Nick

  • How to install NetBeans6.5 in Solaris

    Hi All,
    I am new to the forum and this is my first question. I have installed NetBeans 6.5 in windows system. But my source code is in Solaris can be accessed using clearCase vobs.I have two questions to ask:-
    1. How to install NetBeans 6.5 in Solaris
    2. How to access source code from clearCase vobs to NetBeans
    Hope to get a proper solution from the forum as this is urgent.
    Thanks in advance,

    Sorry, a first generation iPod Touch can not be upgraded beyond 3.1.3.

  • How to Install OBIEE and BIP on a machine with Windows XP ?

    Hi,
    I am very new to OBIEE and want to learn it by myself.
    Can I install OBIEE and BI Publisher on my home PC with Windows XP ? Can I install client and server on the same PC?
    If no, what are the other options ?
    Please help!!
    Thanks!
    Yogini

    Thanks for the link, but I am referring the same to install OBIEE.
    The pre-requisites section says :
    Client operating systems:
    - Microsoft Windows 2000 Professional with Service Pack 3 or later
    - Microsoft Windows 2003 Professional with Service Pack 1 or later (32-bit only)
    - Microsoft Windows XP Professional with Service Pack 1 or later
    Server operating systems:
    - For Oracle BI Server: Microsoft Windows 2000 Service Pack 4/2003 Server
    Thats why I wonder if I can install client and server on the same machine with Windows XP ?
    Please do let me know.
    Regards,
    Yogini

Maybe you are looking for