How to install printer on 1tb tc

I have a first gen 1TB TC and trying to install a usb printer (Canon MP MX860) so my imac and PC can used the internet and print to the printer. I am running Lion on iMac and Win 7 on PC.

Thanks for your reply.
Yes I think so, but mannual of router has not even indicated about that. It says that IP of print server is 192.168.1.254. It doesn't say that it's IP of the router. Even in router's cutomized settings it refers to it as print server's IP. And it is preassigned.
thanks again. i hope you'll try to find a solution.
jurry

Similar Messages

  • How to install printer drivers for monarch

    Dear Friends,
    I got requirement where users are going to use new printer for Bar code printing.
    Kindly suggest on how to install printer drivers in SAP.
    regards
    Jiggi

    Hi,
    In tcode SPAD, goto "Utilities --> For device types --> Import".
    There are specific notes regarding specific manufactures, search the SAP portal for notes in application area BC-CCM-PRN-DVM.
    Check SAP Note 8928 for a start.
    Regards,
    Muralidhar

  • How to install printer drivers....

    HI
             Can any body  tell me about how to install printer drivers. In my case standard drivers(sapwin,swin ..etc) are not supporting. printer drivers are available in Manufacturer site . Can any body please suggest how to install the drivers.
    Please give me the steps ,
    Message was edited by:
            venkateshwarlu veeramalla

    You will need to create separate device types for each printer family installed at your installation or if each printer family require either simplex or duplex printing.
    1. Go to ‘Spool Administration screen’ by using transaction code SPAD from the initial screen of SAP.
    2. From the SPAD screen choose menu path Utilities-->for device types --> IMPORT (or you can run RSTXSCRP program from SE38, too).
    3. In the initial screen of “SAPscript Export to Dataset/SAPscript Import from Dataset” enter the following:
    a) Check Radio button for device type.
    b) In the Object Name field enter object name of the device type file (please see the table at the end of this document for object names)
    c) MODE must be IMPORT
    In the Ctrl parameters for file operation
    d) Check radio button for "From/on frontend" ( Generally this would be the default)
    That's it. Don't enter anything else. Execute by clicking execute button or function key F8.
    4. In the “Create Object Directory Entry” window that pops up, enter your development class and press enter
    5. You will get a pop up Window “Import from a Local File”. Browse through the Window to enter the filename in your local directory and click ‘Transfer’ button.

  • How to install printer canon MX 393

    Dear Sir,
    could u help me how to install printer canon MX 393.

    This explains:
    http://support.apple.com/kb/PH14143

  • How to install printer and modem in solaris

    Please send me detailed installation information about how to install a serial or aparallel printer on solaris 7 and 8 and also how to install the modem on solaris 7 and 8.pls send me some docs,informations etc.

    Solaris 8 includes an "answerbook" CDROM that explains this
    in great detail. Look in the <tt>Solaris 8 System Administrator Collection</tt> �
    <tt>System Administration Guide, Volume 2</tt>.
    You can also read the answerbook documentation online on
    http://docs.sun.com.

  • How I install printer sharp al-2050cs??

    I would like to know how I install a Sharp AL-2050cs printer in my apple computer.

    There is no software to enable this device to work with a Mac.  The printer language is proprietary (SPLC Sharp Printer Language with Comprression) printer language.  I cannot find where Sharp ever supported this printer on a Mac.

  • How to install Printer driver *

    Hi,
    How to install HP printer driver , so that i can see new device type in SPAD.
    Thanks
    Lisa

    Hi Lisa,
    you need to use the program RSTXSCRP, but take care and check documentation maybe on http://help.sap.com
    Good luck
    Fred

  • How do install printer IP1600 using Windows 7?

    Please, could anyone inform how to install a printer IP1600 when using Windows 7?
    Thanks in advance.
    Carlos

    I don't understand what you're asking. iOS 5.1 is the latest version of iOS that exists. If you have iOS 5.1 on your iPhone now and are trying to go back to an earlier version of iOS, that's not supported.
    If that's not what you mean, then you need to explain more clearly what it is you are trying to accomplish.
    Regards.

  • How to install Printer HP LaserJet P2015 in Windows 7!

    Dear all!
    I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
    Thanks a lot and I am looking forward to hearing from all.
    My best regards,
    LUCK
    This question was solved.
    View Solution.

    Hi LUCK,
    The printing functionality for your driver is prodided by the HP Universal Print Driver.
    You may download the driver by clicking the Download button from the link below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
    If you may find it hard to understand any of the installation steps, you may find the full details below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
    Please let me know of any needed clarification.
    Sincerly,
    Shlomi
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to install printer in windows 7 from print server without downloading the driver access denied

    Hi dears,<o:p></o:p>
    i am trying
    to install printer driver which is installed in win server 2003 into win 7, but
    after connecting it says access denied, looks like the win 7 does not have a
    power user to install the driver.<o:p></o:p>
    now the IT
    in charge do not want to change the GP in the domain (win 2008 R2) and he want
    the printer driver to be installed without the it involvements.<o:p></o:p>
    as i can
    see only thru GP in the DC you can do this, am i correct??<o:p></o:p>

    You are looking for this information
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/dc4fcf93-8268-44f4-822a-d463d9443f6c/windows-7-and-server-2003-printer-server-issues?forum=winserverprint
    Alan Morris Windows Printing Team

  • How to install printer on RG11B ?

    Hello
    I'm having problems installing my Officejet 5110 printer on USB port of my RG11B Wireless gateway with print server.
    I'm running XP Home.
    Printer works fine when I install directly on my laptop (wireless 802.11b). But when i connect my printer to RG11B and add standard TCP/IP Port (192.164.1.254), my laptop does not detect (rocognize) the device.  I have also selected LPR protocol and printer queue name as lpt1 as shown in the status of gateway.
    Remember, router's status does show me that HP Officejet 5100 series printer is attached, Printer port 192.168.1.254 and print server name as lpt1.
    my internet and network works fine through router. Only problem is installing printer on print server.
    Thanks for help
    [email protected]

    Thanks for your reply.
    Yes I think so, but mannual of router has not even indicated about that. It says that IP of print server is 192.168.1.254. It doesn't say that it's IP of the router. Even in router's cutomized settings it refers to it as print server's IP. And it is preassigned.
    thanks again. i hope you'll try to find a solution.
    jurry

  • How to install printer which is not listed in the software list

    I just bought Canon MX372 and I am having a hard time installing it. I have installed the software that came with it and yet I can't add it as printer?
    It is always giving me a msg to update the software and when I accept to update it takes a minute and then says software is not available?!!
    any idea what is going on?

    Okay.
    First, got any third-party login items? If so, disable them (and list here for info).
    Got any other third-party software that might impact printing?
    Then try this:
    Keep the installer or dmg you just downloaded from Apple if you haven't already trashed it.
    If you haven't done so, repair permissions on startup drive and reset PRAM.
    Then go to Print & Scan prefs and delete any printers.
    Then go to Macintosh HD/Library/Printers. (You will have to enter password to authorize this)
    Restart.
    Be sure printer is connected (hard wired, not wireless) and turned on.
    Then reinstall Canon drivers downloaded from Apple, restart, and attempt to install printer.

  • How to install printer software with no CD player

    I've installed the HP Envy 5530 e-all-in-one series software on my laptop and can print successfully, but I cannot connect to the device for scanning.  I installed software on my laptop using a download link from the HP site.  In my control panel setup it indicates that the HP software was a basic install and that I should re-install the software from my CD to enable all features.  I have the CD that came with my printer, but my laptop doesn't have a CD player.
    How can I get the complete software installed on my laptop so I can both print AND scan?

    Simply download the 'full featured software and drivers' from the HP web site. Now install.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How to install printer Epson stylus SX200 drivers ?

    I have downloaded the drivers from the dedicated Epson website. I clicked on install and was told install was successful.  now I can not find a way to have the printer identifued bu the iMac and to use it to print etc.
    please help me how to make the last step to be able to print.
    thank you ! :-) !

    Dear Paul,
    THANK YOU !  with your help I have installed one of the drivers on iMac§s list, the Epson Stylus photo R200, whihc I thought is the nearest to the Stylus SX200.  this indeed allowed me to print!  :-) !
    however I also need to scan.  any idea how I can get the scanner going as well, please?
    Initially I have downloaded the drovers for SX200 from Epson own website. this is a bundle containing also the drivers for the scan. however this downloaded bundle which the iMac confirmed that it was installed successfully was not picked up by the "install new printer".  that is why I sleelcted form the list already part of iMac§s sofrware the nearest drivers when adding a new printer.... just to get sometihng working which I did... the printing function.
    please help me if you can to get all the bundle recognised or the scaning drivers to add to the ones working now.
    THANK YOU !
    Best,
    Michael

  • How to install printer over wireless

    We have a Brother printer at work which is connected to the network. It is not possible for me to physically connect to the printer via Ethernet cable, only via wireless. Brother insists that the only way to install/configure the printer drivers is to be physically connected via Ethernet cable. If true, this is one of the most absurd things I've ever heard (it's just a printer — not a multifunction machine — and it is already configured for the network).
    The printer does not appear in the Add Printer list, when I go the the IP that is assgned to it, I get an error message from IIS ("Under Construction. The site you are trying to view does not currently have a default page. It may be in the process of being upgraded and configured") although on Windows machines the printer driver auto-installs when going to that IP address.
    Does anyone have a clue as to how I can install this printer?
    Thank you.

    Hello Jworl,
    Thanks for the post.  I've included a couple of links below with some excellent information on the installation process.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03045596&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=3794615
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=3794615#N189
    I work for HP but my posts and replies are my own....Thank you!

Maybe you are looking for

  • "Indesign CS6 Edit Page Size"

    Hi why have you changed the way edit page size works in cs6 compared to cs5? in cs5 i could use the reference point to decide where i wanted the page to grow. In cs6 it doesnt matter where i have the reference point it adds the size from center regar

  • SAP System is not assigned to the leading

    Hi, I am trying to configure JOB DOCUMENTATION in "Solution Manager / JSM", under tab "SYSTEMS" when assigning "Logical Components" on the bottom of this screen there is a table "Systems", when in this part trying to ativate "Monitoring" getting foll

  • Plugin-container.exe using 40% of cpu

    == Issue == Firefox is having problems with certain web sites == Description == FYI, (thanks to all developers) I rarely go to porn sites but the popunder-windows they generate caused the plugin-container.exe to use 40% of cpus (2 cpu). This is after

  • Trying to find the highest possible MTU

    Hello, I try to find out, wich is the highest possible MTU. So I send a PING -L XXXX -F to the Pix outside, from outside. XXXX is standing for the bytes. PING xxx.xxx.xxx.xxx -L 992 (and lower) -F I got a reply PING xxx.xxx.xxx.xxx -L 993 (up to1472)

  • Can we open URL iview in  existing browser NEW TAB?

    Hi, Can we open URL iview in  existing browser NEW TAB? if so how do we take care of this. I have tried all the window options and anyone of them did not meet my requirement? rgds Vara