How to install SAP ERP 6.0/NW 7.01 Language VI, LT, LV, ET on CD51037843

Dear Expert !
Please help me about how to install SAP ERP 6.0/NW 7.01 Language VI, LT, LV, ET on CD51037843. I hope, you are going support for me as soon as possible !
Thank and Best Regards,
Tru Hang

Hi,
Go through the below links they have defined very good procedure to import languages.
http://help.sap.com/saphelp_nw70/helpdata/en/67/237bd395da11d384bb0060975b04f3/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/67/237bd395da11d384bb0060975b04f3/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a3/30ad5296b511d384bb0060975b04f3/content.htm
-Srini

Similar Messages

How to change minimum data size of MaxDB while installing SAP ERP 6.0

I am installing SAP ERP 6.0 with MaxDB on a Linux system.
The installation document says the minimum size of SAP data is 70 GB.
But while installing the minimum Data size is showing as 240000 MB (240 GB).
On what parameter/system attribute this value of "Minimum data size" depends?
If possible how can we change this value?

Hi Deepak,
I created these on three LVM logical volumes on Linux.
But while installing in "Create database instance" phase I got below error:
Error in log file:
class com.sap.sdb.sllib.utils.DbCommand | <DBMException -24988 ERR_SQL SQL error
-902,I/O error
3,Database state: OFFLINE
6,Internal errorcode, Error code 9050 "disk_not_accessible"
20030,Formatting of data area failed>
What could be the reason behind this? is it because I used logical volumes instead of raw disks OR
the size of logical volumes?
I created 3 logical volumes. two of them with size 125GB each and one with 30 GB.
What should be the appropriate size of each volumes for minimum data size 240GB?
Regards,
Swap

Installing SAP ERP on DB2 with high availability

Hey Gurus,
currently we're installing SAP ERP 6 EHP 6 based on DB2 for unix and windows, this is done using the high availability option on AIX 7.1 and IBM's power HA.
We have the following architecture:
          Node A:
                    1-A host for ASCS, ERS and CI.
                    2-A host for the DB instance.
The same with node B replacing CI with DI.
Please advise on how to proceed with installation.
Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
Thanks in advance

Hi Ahmed,
For your query
Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
Please refer installation guide sections related to file system planning.
Here you can see the file system directory structure as well as information on which filesystems to be shared.
Attached are some screenshot for reference
Hope this helps.
Regards,
Deepak Kori

How to install SAP GUI in Windows 8.1

Hi,
Please guide me how to install SAP GUI in OS Windows 8.1
Regards,
Priya

Before installation of SAP GUI we need to know the OS details and the OS system Bits (32 / 64).
NW SAP Setup
• Download the software @ SAP Site using S user login ID.
• Download the Software gui730_0-10010496 (include the patch 6 hotfix 1)
• After download Extract it and go to the path and install.

How to instal sap

Hi guys i joined new organization
i would like to know how to instal sap in my laptop
and can anybody guide me installation steps
regards
babu

Hi
Check this link..
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Here are the link which will explain the procedure
http://www.sap-img.com/basis/sap-ides-installation-procedure-for-sap-install-on-w2k-server.htm
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Regards
Sreenivas

Installing SAP ERP Net Weaver application server

Dear,
I am newcomer in SAP ERP industry, so i would like to practice more at home after which i learned in University.
I want to install SAP ERP application at home which is run offline ( which could be adjusted as i want ) not via web browser like I am usually doing that.
I have workstation laptop , I think it will run well.
Or you can instruct me more.
Thanks all

Hi Binh,
You could check with SCN thread Step by Step Installation Guide for SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version
Getting started with Netweaver 7.3 portal Part 1-Installation
Hope this will also help you.
Good luck !!

Install SAP ERP 6.0 with Linux and Oracle RAC

Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.

Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
    o You can use "Physical Standby".
    o You cannot use "Logical Standby".
    o You can use Data Guard Broker.
    o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
    o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende

'SAP_APPL,600 has to be installed' when try to install SAP ERP EnHP3

Hi,
I'm trying to install EHP3 on windows2003/oracle10.2/SAPecc6.0 by tools SPAM & SAINT.
But the system send the message 'Component SAP_APPL,600 has to be installed'
I want download the 2 packages:
"SAP enhancement package 1 for SAP ERP 6.0"
"SAP enhancement package 2 for SAP ERP 6.0"
But I have not find there in the SAP's Portal
I found only:
    SAP ERP ENHANCE PACKAGE
          SAP ENH PACK 3 FOR SAP ERP 6.0
          SAP ERP ENHANCE PACKAGE 2005.2
I have a pack of DVDs 'SAP ERP 6.0 SR3' which contents:
- upgrade master (51033520)
- installation export (51033500) 2 dvd
- ERP components (51033525)
- Upgrade export (51033501) 3 dvd
- Langage (51033496) 2 dvd
- Documentation SAP ERP (50085424)
Do you explain how and where I can dowload and install the component SAP_APPL,600
Thanks.

Hi,
EHPs are cumulative, you should only install the parts from the latest EHP (=EHP3).
There is no need (and benefit) to install EHP1 or 2.
The download should be done using Solution Manager Maintenance Optimizer (not SMP) - here you get also a valid Stack XML generated which ist required to perform the installation.
More information here: The specified item was not found. or here: http://service.sap.com/~sapidb/011000358700001166742007E
Best regards,
Christian.

Error instalation SAP ERP 6.0

Hi colleagues:
I am trying to install an ERP 6.0 on a windows server 2003 and SQL Sever. The problem I have is that on phase 20 of 24 (Starting) the systems prompts me an error. It seems that it cannot start. Ihave tried to restart again but the problem still exits.
I have another instance in the system but it does not seem a problem of memory. Iu00B4ve checked the logs of the different processes and I think that is a problem of the database, the processes cannot connect to it, and therefore makes a problem of login.
The content of the log is:
B Mon Jun 16 09:41:15 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno      00
M sid        DES
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        1868
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 9 1868) [dpxxdisp.c   1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jun 16 09:41:16 2008
M DpShMCreate: sizeof(wp_adm)          18304     (1408)
M DpShMCreate: sizeof(tm_adm)          3994272     (19872)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1440)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 07FE0040, size: 4653368)
M DpShMCreate: allocated sys_adm at 07FE0040
M DpShMCreate: allocated wp_adm at 07FE1E40
M DpShMCreate: allocated tm_adm_list at 07FE65C0
M DpShMCreate: allocated tm_adm at 07FE65F0
M DpShMCreate: allocated wp_ca_adm at 083B5890
M DpShMCreate: allocated appc_ca_adm at 083BB650
M DpShMCreate: allocated comm_adm at 083BD590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0843E450
M DpShMCreate: allocated gw_adm at 0843E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0843E4C0
M DpShMCreate: allocated wall_adm at 0843E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 9 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sap470
M
M Mon Jun 16 09:41:17 2008
M calling db_connect ...
C Thread ID:380
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SAP470
C CopyLocalParameters: dbuser is 'des'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Mon Jun 16 09:41:18 2008
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
M
M Info for wp 9
M
M    stat = 4
M    reqtype = 4
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sap470_DES_00 on host sap470 (wp 9)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon Jun 16 09:41:18 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 9 1868) [dpnttool.c   327]
Thank u a lot.

Hi anil:
Yes, I have them already installed, and I also have another system running in the machine, so i do not think that this is the problem.
Do you have any other idea??
Thanks a lot.

Install SAP ERP 6.0 with EHP7 - Inst Master ???

Hi All,
I've downloaded all necessary files need for EHP7 FOR SAP ERP 6.0 IDES Version.
The downloaded files are listed below.
NW 7.0 Presentation - 7.30 Compilation 3
NW 7.0 Presentation - Adobe LiveCycle Designer 9.0
RDBMS MSSQLSRV 2012 SP01 CU7 1/8
RDBMS MSSQLSRV 2012 SP01 CU7 2/8
RDBMS MSSQLSRV 2012 SP01 CU7 3/8
RDBMS MSSQLSRV 2012 SP01 CU7 4/8
RDBMS MSSQLSRV 2012 SP01 CU7 5/8
RDBMS MSSQLSRV 2012 SP01 CU7 6/8
RDBMS MSSQLSRV 2012 SP01 CU7 7/8
RDBMS MSSQLSRV 2012 SP01 CU7 8/8
SAP Kernel 7.41 Windows Server on x64 64bit
IDES SAP ERP 6.0 EHP7 Inst. Export 1/14
IDES SAP ERP 6.0 EHP7 Inst. Export 2/14
IDES SAP ERP 6.0 EHP7 Inst. Export 3/14
IDES SAP ERP 6.0 EHP7 Inst. Export 4/14
IDES SAP ERP 6.0 EHP7 Inst. Export 5/14
IDES SAP ERP 6.0 EHP7 Inst. Export 6/14
IDES SAP ERP 6.0 EHP7 Inst. Export 7/14
IDES SAP ERP 6.0 EHP7 Inst. Export 8/14
IDES SAP ERP 6.0 EHP7 Inst. Export 9/14
IDES SAP ERP 6.0 EHP7 Inst. Export 10/14
IDES SAP ERP 6.0 EHP7 Inst. Export 11/14
IDES SAP ERP 6.0 EHP7 Inst. Export 12/14
IDES SAP ERP 6.0 EHP7 Inst. Export 13/14
IDES SAP ERP 6.0 EHP7 Inst. Export 14/14
I don't find Inst.Master which is required to start up the installation. Where to download it and what specific version I need to download for EHP7 for SAP ERP 6.0 IDES ?
Are there any JAVA COMPONENTS that I need to download before starting installation like Java Component BS2005SR3 or Java Component NW 7.0 SR3 ?? and SAP ERP 6.0 SR3 Components for EHP3 do we have similar components for EHP7 ?
Can anyone tell me what type of collation I need to select when installing the MSSQL Server 2012 and which Operating system is best suitable for SAP IDES 6.0 with EHP7 on MSSQL Server 2012 ?
I have JAVA from Oracle version 1.4.2 and policy file or whcih version of JAVA is suitable for installation ? Is it possible to do the install with latest JRE available ?
Will appreciate rewards for best support.
Regards,
Gowri Shankar

Hi Tomas,
Good day, as per you advice. I manage to go thru the IDES installation but its stuck on 19 of 34 (Import ABAP) with error code 2.
Below are the text written in ECC Message Box.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
I've created new thread for this issue at Error in SAP installation in phase 19 of 34 - Import ABAP
Looking forward for your reply.
Regards,
Jay
-96-
Message was edited by: Jay Jay

How to install SAP BODS,which version is comaptiable to SAP R/3 system as source

I would like to know installation steps for BODS?How to make connection between SAP R/3 (Source )and BODS.
What is the purpose of CTS to copy in the SAP R/3 application server?

Dear Sir:
My question is .....i would like to download and install SAP R/3 ENTERPRISE 47X110 on Window NT 2003 R2 64 bit(AMD64).
Does SAP R/3 ENTERPRISE 47X110 support Windows 2003 64 bit?
How to do .....?
I need to simulate R/3 4.7 x110 upgrade to ECC6.0.
Regards
Jack Lee

How to install SAP BW3.0B IN WINDOWS XP PROFESSIONAL....reply asap.

HI ALL,
can anyone please help me how can i install SAP BW 3.0B VERSION on windows xp preofessional.i have the document and while setting the user variables and giving the variable value(java path..eg:c\programfiles\j2dk....).
after that when i click on the command prompt it is showing that in the path unable to identify the files.i want to install in my home pc to practice.
so anyone please help me how to install it?and one morething is it possible to install it on XP VERSION.the document is based on WINDOWS SERVER 2003 .
Thanks in advance.

Hi Ashok,
You cannot install it on windows XP. You need to have a server version of windows (2000, 2003). Or, also on linux, but for that you'll need another installation.
Hope this helps.
Regards,
Diego

How to install sap licensce? and orcle licensce ?

hi friends
i have to install sap licensce in sap ecc 6.0 and solman.
how to get it from the marketplace we buyed sap licensce .
how to login from which client and which user ?
how to install the orcle licensce to my data base ?
please suggest me asap
thanks in advance
regards
raja

Hi Raja,
Use t code SLICENCE in your ecc6 and solman.
Determine the hardware key.
Go to sap market place. click on 'Keys & Requests' tab. Here select 'Request permanent license key' tab. Enter the required information. This way you'll get the license key.
Now go back to the SLICENSE in sap. select 'EDIT' - 'Install license key'' (F6).
Log in to client 000 with DDIC for installing the license.
As per my knowledge you dont need to install oracle key because, oracle comes in a bundle package with SAP.
Hope this helps.
Regards,
Pranay

How to install SAP-EP 7.0 Trial version

Hai to every one .
i have Sap-ep 7.0 trial version .
can any one help me how to install step by step, how to make system to ready for instalation.
ihave software in two .rar files.
and after configeration steps if possible.

Hi Eswar,
Follow instructions in the install.html file in the root directory.
Install java and set
JAVA_HOME and PATH variable.
Regards
Ashok

How to install SAP

Hi,
I just want to know how can I install SAP? What are the required programs to install SAP because I tried to install SAP (MaxDB, SQL Studio and SAP webtools) but i can't open MaxDB I always got an error "Can not create the FileSystemObject from the Microsoft Scripting runtime library (scrrun.dll)" Error 429."
Is it ok to download the programs related to SAP and install it to my PC? If yes, please help me to install it properly. Please give me step-by-step installation and configuration to run it properly.
Please help me I really want to learn how to use and create programs using SAP.
Thank You.
Dexter

Hi,
Please take a look at the links below.It is telling very well how to install nw2004s.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/installationCheatSheetforWindows-MaxDB&refer=aprilsdndevlopmentfeature
Regards.

How to install SAP ERP 6.0/NW 7.01 Language VI, LT, LV, ET on CD51037843

Similar Messages

Maybe you are looking for