How to install the NI-DAQmx driver on a real time target PC?

Hi, I’m painful about how I can install a PCI-6363 DAQmx on my real time desktop PC target. The PCI-6363 is directly connected to the real time PC. And I’m using LabVIEW 2011 and MAX 5.0.
The DAQmx device driver can be seen in software lIst in the host PC, but it can not be found in the install wizard. Is there something wrong with my host PC? or is that wrong to connect PCI-6363 with real time desktop PC?
I would be grateful for any advice that I could get here.
Solved!
Go to Solution.

Hi Zhleo,
If you are about to use the PCI-6363 with the Real-Time Desktop you are right you need to have it installed, and then you need to deploy DAQmx driver software to the real-time target.
To do that you access your real-time desktop under Remote Systems in MAX and start the Real-Time Software Wizard. There you should see DAQmx listed.
In case you do not have DAQmx listed there, see this KB: Deploying DAQmx to a Real-Time Controller or PC?
Regards,
Eirikur Runarsson
Platinum Applications Engineer
NI Denmark

Similar Messages

How to identify the Stanadard Extractor will support for Real time Data

How to identify the Stanadard Extractor will support for Real time Data Acquisation . Enabled

Hi
In the ROOSOURCE table you can find the extract structures, go through all the fields of the extractor and if you find all of your equired fields exist ok else try to enhance for teh needed fields and go with user exit to populate the data for that fields'

How to install the Oracle ODBC driver for all NT users

I need to schedule a task on a SQL server running on NT to access an Oracle DB.
I have installed the Oracle ODBC driver on it and it is working well under my NT account.
But the SQL scheduler runs on another NT account and the task failed.
How is it possible to install the Oracle ODBC Driver for all NT users ???
Thanks for your inputs...

http://forum.java.sun.com/thread.jsp?forum=48&thread=187964&start=0&range=15#608968
The above link is a comprehensive "How to get set up and on my way" that I made for someone else learning Oracle/jdbc. Kind of a self-help resource page. I would start from the beginning and download the newest drivers, then set up your environment,...etc.
hope this helped,
Jamie

Where are daqmx files stored on real time target?

Hi,
I am working on an application that will be embedded in a RT desktop target. To make the system easier to maintain in the future, I would like to be able to generate a DAQmx task programatically from the *.ini file exported from MAX. This way, users don't have to know what my code is doing in order to recalibrate sensors or manage new hardware; they only have to know how to use MAX and where to store the config files on the target.
Where are daqmx task, channel, and scale information stored on a RT target? I've been through the files on the target looking for something that contains my task data but have found nothing, though dropping a system property node into a VI running on the target will give a correct list of the tasks that I have configured. (The project that contains the aforementioned VI does not have the tasks in it ie: I did not import them to the project.)
Is there a utility that will run on the RT target that can generate a task at run time from the exported *.ini files?
Thanks
CLAD
Solved!
Go to Solution.

Exahustive keyword searching brought me to an answer on the forums. I'll post a brief summary here in case anyone else uses the same keywords as I have.
1. Export config file from MAX
2. Write a VI that uses the tools in the System Management pallette to upload the configuration to the real-time target.
3. Profit.
In my case, the VI I wrote to upload the DAQmx config also generates the config files for the VIs on the host and target side, so everybody knows what the tasks are called.
CLAD

How to install the pseduo device driver?

I downloaded one package to produce high resolution delay ( similar to sleep() ).
Here is the comment text in main file:
Written by Jon Zeeff umix!b-tech!zeeff
This "device driver" uses the kernel delay() call to allow calls
to nap() from user processes. Nap() is like sleep, but with finer
resolution.
Compile with cc -O -c ft.c
Written for a Sys V.3 system, but should work on others.
For Sys V.3:
Make a new kernel according to the instructions and then:
mknod /dev/ft c 28 0
modules/ft/config:
character(28)
prefix = ft
functions = open, close, read
Edit systems/system.std and add ft.
Copy ft.o to modules/ft/config
But, where is " modules " directory ? and where is system/system.std ??
thanks.

Go here: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=3995705&h_page=hpcom...
Select your product > Select your model > Option 2: Go directly to the software and driver results > Driver-Keyboard, Mouse and Input Devices > Synaptics TouchPad Driver
You should be able to download and reinstall the driver.

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

How to see the bitrate of a video in real time

Some time ago I posted a question on this forum, asking if it's possible to do that (http://discussions.apple.com/thread.jspa?threadID=325516). As the topic is archived, I can not write the answer I found today: VLC, at least version 0.8.5, can do exactly what I need: on Window > Information > Statistics, it's a reading named Stream bitrate that reads like once per second the bitrate.
It works not only for DVDs, but for any video, of course.
Brilliant! And it's free!!

This is great!
You can both watch your newly compressed m2v and see the bitrate in real time.
VLC media player 8.5 for Mac OS X can be downloaded here:
http://www.videolan.org/vlc/download-macosx.html

HT1178 how to install a usb hard drive though air port time capsule

I am looking to connect a usb hard drive to my time capsule airport. The primary purpose of this drive is to create a shared drive between the three computers in the house, not for time machine. Is there any specific steps or procedures I need to know to make this happen? thanks.

Plug it in, click here, and follow the instructions. The drive needs to be formatted as FAT16, FAT32, or Mac OS Extended (Journaled), and may need to be connected through a powered USB hub.
(90236)

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

How to install Vision run-time engine to a desktop PC converted to real-time target

Hi, all
I don't know how can I install the vision run-time engine to a desktop PC which I converted to a real-time target. The same problem applies to installing real-time run-time engine and labview run-time engine to the real-time target. The only way to install software to real-time target is through "add/remove software" in MAX for remote system, but it is not for all types of run-time engine installation.
I am also confused about how to activate those run-time engines for the desktop PC as real-time target.
Please help and great thanks.
Wei

Hi turtle,
Here is a link that explains how to set up a desktop PC as a real-time target. The section for Formatting & Setup should help you the most.
NI Developer Zone Tutorial: Requirements for Desktop PCs as LabVIEW Real-Time Targets
Justin D.
Applications Engineer
National Instruments

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

Can anyone tell me how to install a network printer driver without having the network printer online?

Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
the driver? This is the point of my question!
I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

How do I install the nvidia 173 driver?

Hi
Today I installed Arch. Felt like the greatest achievement. Got xorg, and a few other things working, lxde until I download kde... and how to I install the nvidia 173 driver from the aur for my nvidia geforce fx 5700 (leastwise winfast a360) on arch?
many thanks.
PS sorry if this is scruffy, I'm on my phone which is small

Welsh_Miner48 wrote:https://aur.archlinux.org/packages/nvidia-173xx/ is it I think
Sure it is.
Did you read https://wiki.archlinux.org/index.php/Nvidia ? It's mentioned at the very beginning.

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

How to install the NI-DAQmx driver on a real time target PC?

Similar Messages

Maybe you are looking for