How to install (using usb flash drive) os x snow leopard on 10.5?

i have a version 10.5 (leopard), but i would like to install snow leopard (10.6). i tried using bootable usb flash drive using the "utility drive". However, it did not quite work as i expected. Does anyone know how to use bootable usb flash drive to install snow leopard on leopard?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Leopard installer DVD. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Insert the USB flash drive.
Restart the computer.
Immediately after the chime press and hold down the "OPTION" key.
Release the key when the boot manager screen appears.
Select the icon of the USB flash drive and click on the arrow button below the icon.
When the installer finishes loading follow the onscreen instructions.

Similar Messages

How to install Win 7 on Mac using USB flash drive....???

How to install Win 7 on Mac using USB flash drive....???

clintonfrombirmingham wrote:
I thought that installation through Boot Camp required, without hacks, a physical optical disc to install Boot Camp? I don't use it any longer since I run XP under Parallels, but I would swear that you have to use a disc, and not a USB thumb drive, to install Windows?
Maybe some real Boot Campers will visit this thread...
Clinton
If you have the Media you can use it to create a bootable USB key via boot camp assistant.
It will create the usb and has the option of pre-downlading the drivers and bootcamp utilities for windows.
It is pretty much all automated and quite simple.

How to use USB flash drive in XFCE?

Hello,
How to mount/unmount USB flash drive in XFCE?
Thanks for your help,
Anand

http://wiki.archlinux.org/index.php/AutoFS_HowTo might be interesting

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

How can I use a flash drive on IMac?

How can I use a flash drive on my IMac? I can't open or send files to it.

Des it show up in Disk Utility? If it does, then you have to format it as Mac OS Extended *jounaled) so that you can write to it.
Please also let us know what model iMac you have.

Install windows server 2008 64bit on a poweredge sc430 using usb flash drive

Good day Sir!
I Have 2 poweredge sc430 server with windows server 2003 64bit OS... I want to upgrade it to windows server 2008 standard edition R2 64bit.. I first disable the internal cdrom from bios and installed win2k8 64bit on 1 sc430 using external dvdrom. But when i used a usb flash drive to install win2k8 to another sc430, the server and keyboard hangs. ive already configured the boot sequence(usb drive as 1st priority). ive tried my usb flash to a non dell pc to make sure if my usb boots well and it worked... i think that there must be something i missed in configuring the bios of sc430
Thanks in advance!

donpham
Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks!
That's not how it works.

How to use usb flash drive

So i tried to use a usb flash drive to save a word document on my macbook, but i couldnt find the flash drive, or even where to find the usb port. can somebody tell me how to use a usb flash drive on macbooks?

The USB ports are on the left side.
Just plug in the drive, and it should show up on your desktop (or in the Finder - click the happy face icon in your dock). Drag and drop the files into the drive. Or, select the drive as the save location when you pick Save or Save As in Word.
When you're done, drag the drive's icon to the trash (it will change to an eject symbol), or click the little eject symbol next to it's icon in the Finder. You can then safely unplug the drive.

How to partition a USB flash-drive to install Arch Linux?

Good afternoon,
Could anyone please guide me in the right direction, how would I go about partitioning my USB flash-drive in order to install Arch Linux onto my Acer Aspire One? I've found guides, but none of them are specific enough - the static assumption being that the OS is already partitioned onto your flash-drive, and that is not the case for me.
Much appreciated,
A Swiftly Tilting Planet

assuming your usb key is /dev/sdz
# dd if=/dev/zero of=/dev/sdz
//cleans the usb drive
# fdisk /dev/sdz
// press m and read the help, make a partition, make it bootable
// you have to press (double check anyway):
// n, p, 1, <enter>, <enter>, a, 1, t, b, w
# mkfs.vfat /dev/sdz1
// formatting
The first passage can actually replaced to something more modest, like:
# dd if=/dev/zero of=/dev/sdz bs=1024 count=1
Last edited by ezzetabi (2009-01-03 16:37:04)

Using USB flash drive to connect laptop

On previous versions of Network Magic, when adding a laptop to my wireless network, an option would appear for using a USB flash drive to transfer settings and/or password to the new machine.
After a few "upgrades" to NM, the option ONLY appears after I turn my security off. If I leave my WEP security ON, the only option that appears is to "copy" the 32-digit password & enter it on the laptop. However, I keep getting errors.
Is there a procedure to use a USB flash drive to connect a "new" laptop to my secured wireless network?
Thank you.

thomas.adkins wrote:
On previous versions of Network Magic, when adding a laptop to my wireless network, an option would appear for using a USB flash drive to transfer settings and/or password to the new machine.
After a few "upgrades" to NM, the option ONLY appears after I turn my security off. If I leave my WEP security ON, the only option that appears is to "copy" the 32-digit password & enter it on the laptop. However, I keep getting errors.
Is there a procedure to use a USB flash drive to connect a "new" laptop to my secured wireless network?
Thank you.
Hi thomas,
If this is your own New Laptop to your Network, and even after you supplied the password, the problem is the Network Lock is still on. You need to disable the Network Lock. Enter the password, installed Network Magic if the Laptop is your own. You need to stop tracking your Laptop as an intruder on your other copies of Network Magic.
Then you need to reenable the Network Lock from your Wired Computer. Use your other computer to activated the copy of Network Magic installed on the laptop.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Boot camp install from USB Flash Drive

Hi Folks,
I recently purchased a new Macbook Air. It has 10.8.3.
I used the Boot Camp Assistant to set up the computer for Boot Camp. It went through all the steps: First, it formatted my USB Flash Drive. Next, it copied Windows installer crap from the my ISO to the USB Drive. Next, it downloaded the Apple Drivers and put them on the USB drive. Next, it restarted in order to boot from the USB drive.
This is where I hit a wall. The computer will not bpt from the Flash Drive. It is as if the control panel has set the startup disk to "BOOTCAMP" instead of the flash drive. So when the computer restarts, it just says "No bootable device - insert boot disk and press any key."
How can I get it to boot from the flash drive?
Thanks In Advance
Andy
Corrected the error message to exact phrase.

Hmmm... interesting... My sites I found suggested otherwise. I tried three diferent brands of jump drives and none of them actually booted the Macbook Air. The Boot Camp Assistant used them all just fine, but booting was the issue. Glad you got it to work. Would you mind posting what brand you used so other reading this thread in the future could learn?
Also, were you just using the BCA or, did you do some other process to make it bootable first? Since the BCA formats the drive, I would think any process done ahead of time would be thwarted (as mine were).
Thanks!

HOW TO YOU ADD USB FLASH DRIVE TO BOOT OPTION

i HAVE TWO LAPTOPS SAME MODEL NUMBER ONE CRASHED, hp SUPPORT TALKED ME THROUGH F11 TO RECOVER TO FACTORY CONDITION THE LAPTOP STOP AT 100% WITHN1 MINUTE LEFT TO CMPLETE. HP TOLD ME TO ESCAPE AN DO F2 TO CHECK THE HARD DRIVE. THAT WORK IT SHOWED ALL THE CHECKS PASSED. IT TOOK 2 + HOURS SO WHEN i CALLED BACK DIFFERENT PERSON SAID $350 SEND IT THEY WILL FIX. iT'S NOT IN WARRANY SINCE FEB2014 i ONLY PAID $399 FOR IT, CANNOT AFFORD THAT. SO HP TECH SAID USE SECOND PC TO MAKE A FLASH DRIVE . (I MADE CD'S WHEN I FIRST GOT IT BUT THEY DID NOT WORK). SO GOT A FLASH DRIVE WTH 32GIGS (I THOUGHT SHE SAID I NEEDED AT LEAST 20 GIGS) COPIED THE RECOVERY PROGRAM, NOW THE USB WILL NOT OPEN. FROM AN EARLIER WRITTER HE WAS TOLD TO F10 BIOS, ESC LOOP FOR BOOT OPTIONS TO SEE IF USB FLASH DRIVE IS THERE. MY PROBLEM ITS NOT ON MY PC SO HOW DO I ADD IT SO THE USB WILL OPEN.
RIGHT NOW PC IN A LOOP WHEN POWERED ON HP AND TIME COMES UP, LITTLE WHILW A BLOCK WITH HP/DAT/TIME COMES UP AND A CMD ON BOTTOM OF SCREEN, IT GOES BY TOO FAST T CLICK ON IT AND GOES BACK TO HP LOGO. IF I COULD ADD USB FLASH AS AN OPTION IT MIGHT MAKE IT OPEN ANY HELP APPRECIATED.

The flash drive is not going to show up if it is not bootable. To make a bootable Recovery on flash you have to use Recovery Manager just like you do to create cd/dvd Recovery.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

PhotoSmart C4580 cannot use USB flash drive

I just installed a PhotoSmart C4580 on a Dell Optiplex 360 running Windows XP Professional, SP3. If the printer is turned on, whenever I plug in a USB flash drive, I get a Windows error message to the effect that Windows does not recognized the device and it is unuable. If I turn off the printer, all works well. Any ideas?

Charlie, did you ever figure this one out. I also cannot use the flash drive if my HP printer is on.

Pavilion dm1 Making A Recovery Set Using USB Flash Drive

I have a Pavilion dm1 for which I have tried to create a Recovery Set using a USB flash drive. However, on starting the Recovery Manager, I find I can only use discs......but the Pavilion dm1 has NO disc drive and no facility therefore to burn discs!!! Am I wrong to be completely puzzled by this? Does anyone have any idea at all, other than to purchase an external disc drive which I really do not want to do?? HP will sell me a Recovery Set but again ONLY ON DISC!! Seems absurd that a piece of kit that has no disc drive will only be able to be recovered using a disc! I confess to being a bit computer illiterate so maybe I am missing something. Any help most gratefully accepted.
This question was solved.
View Solution.

I will keep an eye out for your response.
Thanks for updating the community.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Creating Recovery Media using USB Flash Drive for Windows 8.1

I followed all the instructions to create a USB Flash Drive Recovery Media (insert 16 GB USB Flash Drive or >) and it said it will be created now (after I clicked on Create), however the next screen said to insert > 7.5 GB flash drive, then it said it was cancelled. I was attempting to use a San Disk Flash Drive and I am wondering if it is because it has some time of application on it. I was under the understanding that it would just "delete/erase" this (format it) and then create it, but it wouldn't. Any suggestions?

In Windows 8, one can create a "recovery drive" (called a System Repair Disc in Windows 7) that does not contain the recovery partition. (When you install Windows 8 yourself, there is no recovery partition.) It contains just the recovery environment.
Create a USB recovery drive [edited to repair the link]
Not sure what Shirley did, because it shouldn't take even that much space.
-Jerry

How to reformat a USB flash drive?

I have 1.33 GB available on my Buffalo USB 2.0 GB Flash Drive that is formatted as MS-DOS File System (FAT 16).
Suddenly, every time I try to copy a MS Word document from my iMac to the flash drive I get the following message.
+"The item cannot be copied because there is not enough free space."+
I reported this to the Buffalo customer service and they responded with,
+"When you look at the files in the USB flash drive, do you see a lot of temporary files? Please delete these. If there is no other solution, I would like you to copy your good files onto your computer hard drive, reformat the USB drive, and copy the good files back onto the USB drive. "+
I did not see any temporary files, so I'm thinking that I have to reformat the flash drive.
But how do I do this?
I've backed up the files on the flash drive to my iMac.
I insert the flash drive and click on Disk Utility.
I select the flash drive icon and...
What do I do now?
The choices at the top are First Aid, Erase, RAID, Restore.
BTW, I am running on a iMac 2GHZ Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM, OS 10.4.10.
As is evident, I have no idea about computers.
Please advise on a step-by-step basis.
I thank you in advance for your assistance.

Select Erase. Volume Format: MS DOS System.

How to install (using usb flash drive) os x snow leopard on 10.5?

Similar Messages

Maybe you are looking for