How to install windows XP on 600E?

am doing friend's computer.
how to make it boot on the cd-rom?
what choices should i make?
anything that i might do to have it install properly?
thank you in advance.

Press F1 to enter BIOS and change the boot sequence to start with CD-ROM.
Bear in mind that unless the RAM is maxed out, 600E will be pretty slow in XP, you may want to try Windows 2000.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

    This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
    I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
    here. Maybe this helps other users.
    I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
    Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
    The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
    The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
    You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
    I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
    never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
    You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
    Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
    products.
    Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
    Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
    Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
    Open a command prompt. CD to the following directory:
    \Program Files\Common Files\Lenovo\BMGR
    On a german language system (like mine) it is
    \Programme\Gemeinsame Dateien\Lenovo\BMGR
    If you have an older IBM system the directory may be named
    \Program Files\Common Files\IBM\BMGR
    or something like that. Maybe you need to search around.
    In the following, I will call this the "BMGR dir".
    Enter the following command:
    bmgr32 /info /v
    You should get an output similar to this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 4   Checksum: 03    Passed
            MBR Sector 3 Index: 5   Checksum: FD    Passed
            MBR Sector 4 Index: 6   Checksum: 58    Passed
            MBR Sector 5 Index: 7   Checksum: 96    Passed
            MBR Sector 6 Index: 8   Checksum: 7F    Passed
            Data Sector  Index: 3   Checksum: F1    Passed
            Original MBR Index: 2   Checksum: BD    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
            Boot Config: 2 (Service Partition containing two Service OS's)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   239 255 255           63    301296177
     1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
     2   0x00   0x00      0   0   0     0   0   0            0            0
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
    partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
    for you.
    Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
    Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
    Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
    Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
    bmgr32 /info /v
    The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
    shows a smaller value.
    Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
    Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
    DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
    environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
    Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
    Continued in the second post...

    Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
    Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
    Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    Opened Master Boot Record to see whose MBR it is.
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
    Otherwise the following step will likely screw up you harddisk.
    Enter the following command (case sensitive?):
    bmgr32 /Fbootmgr.bin /m0 /IBM /v
    The output will look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
    installing MBR
    finding free sectors
    Sector 9 is free
    Sector 10 is free
    Sector 11 is free
    Sector 12 is free
    Sector 13 is free
    Sector 14 is free
    Sector 15 is free
    Sector 16 is free
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Setting Think bit
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
    Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 11  Checksum: 03    Passed
            MBR Sector 3 Index: 12  Checksum: FD    Passed
            MBR Sector 4 Index: 13  Checksum: 58    Passed
            MBR Sector 5 Index: 14  Checksum: 96    Passed
            MBR Sector 6 Index: 15  Checksum: 7F    Passed
            Data Sector  Index: 10  Checksum: 01    Passed
            Original MBR Index: 9   Checksum: 12    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
            Boot Config: 0 (Service Partition containing one Service OS)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    So you have actually regained the Lenovo bootmanager. But you are not done yet.
    Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
    Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
    Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

  • How to install Windows 8.1 Pro on Macbook Pro

    Hello everyone,
         I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
    After finishing the downloading process, I received this file which is about 4GB large.
    When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
    At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

    You need a 'Full' Installer.
    From Boot Camp 5.1: Frequently asked questions - Apple Support
    Which versions of Windows work with Boot Camp 5.1?
    Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
    Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
    It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

  • How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

    how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
    Iam new to coding. please help me.

    try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

  • How to install Windows 7 on a MacBook Air?

    Hi everybody,
    I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
    I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
    I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
    I have tried to run bootcamp and follow the instructions, but to now end.
    on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
    when i start boot camp on my iMac, this option will be greyed out.
    Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
    does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
    Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
    thanks!

    30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
    http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
    There is a program to create DVD from ISO or .exe
    Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
    Disk Utility is not a good method for burning Windows DVDs.
    http://simplyburns.en.softonic.com/mac
    https://discussions.apple.com/thread/3241150

  • How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

    How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
    I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
    I try many time, but after restart bootcamp partition, apple show blinking folder error
    I think this firmware not support to install windows by usb
    NOTE:
    I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
    If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC  ? 

    I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
    But- are you trying to reboot with both the USB install and the DVD install both plugged in?  that would definitely cause confusion.
    Do this, reboot with NOTHING plugged in.  Once you hear the Mac chime, immediately press and hold option.
    You should only see the Mac HD, and Recovery Partition.
    THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows.  If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing.  I had to do it this way on my mid 09 MBP.
    Let me know if this works to start the install.  If not we may have to start over with Bootcamp Assistant

  • I have Macbook Pro 13" mid 20012. How to install Windows 8 onto the mac using DVD? 10.8.3

    the title says it all.
    i have windows 8 DVD and i would like to have a clear instructions on how to install windows 8. I dont understand the need for USB

    Welcome to the Apple Support Communities
    You need a USB drive to install the Windows support software. It contains all the drivers that your MacBook Pro needs, and you will have to install them after finishing the Windows installation. If you don't install them, a lot of things won't work: the wireless card, the sound card, the brightness, the trackpad gestures... Apart from that, you don't need it for anything else.
    Apple has released the official steps to install Windows 8 on a Mac, so if you want, print this PDF > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

  • How to install Windows 8 on Macbook pro with retina display ?

    Hi - How to install Windows 8 on Macbook pro with retina display ?
    I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
    I am not interested to install it through Parallels or Fusion. Plz guide.
    Thanks !

    OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
    Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

  • How to install Windows 8 on Macbook Pro w/ Retina Display?

    Hi,
    I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
    Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
    Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
    I will be very thankful. Please help!
    Thanks

    Hi Mende1,
    Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
    Well, The Guide is simple but there are few questions which I'm not able to understop still.
    1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
    2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
    Thanks

  • How to install Windows 8.1 without optical drive

    I just got a ZBook 14 which was preinstalled with Windows 7. I want to use Windows 8.1 Pro which was alsp delivered on DVDs in the packages. However, this machine does not come with an optical drive. How can I install Windows 8.1 on this machine?
    Thanks

    Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and  any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive.  I suggest you do not give advice unless you know what you are talking about.
    For all others thatwant to the same thing.
    1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
    2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
    3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
    Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

  • How to install windows 8.1 in macbookpro

    how to install windows 8.1 in macbookpro
    im using MacbookPro version 10.8.3

    You can install Windows using Boot Camp Assistant, instructions located here: http://www.apple.com/support/bootcamp/
    Or, you can install Windows using a virtual machine like Parallels, Fusion, or VirtualBox. Instructions located on their respective sites.

  • How to install windows 7 on Mac OS 10.9

    Hi, all, I recently purchased a Macbook pro 13 with Retina display, it has MacOS 10.9 on board, but I have some work need be done on Windows, so I have to install Windows7, meaning that I will have a dual boot on my Macbook. I did a bit research on how to do that, but either the apple support has article about installing Windows 7 using boot camp, or the community has a unified answer for that. So I wonder how to install Windows 7 on MacOS 10.9, any help is welcome.
    cheers

    I use Oracle's free VirtualBox with Windows 7 Home Premium. As you might infer from the name, it is a virtualization solution and does not involve storage partitioning as will Boot Camp. It is responsive whether on an older Core 2 Duo with regular drive, or a Core i5 with underlying SSD. A Haswell and SSD solution would make it sing.
    I use two large monitors and you can tell VirtualBox to always launch the Windows guest on the second monitor.
    Whether you use a virtualization solution or Boot Camp for true dual-boot will depend on what you plan to do with Windows.

  • How to install windows phone 8.1 in other mobile phones(Android mobile phones or other)?

    Can i install windows phone 8.1 in other mobile phones(Android mobile phones or other)?

    Csound1 wrote:
    Either you will do this correctly or you will not.
    You can not have a storage partition in addition to Mac OS and Boot Camp.
    I can't help at all if you want to go your own way.
    Good luck, backup before you lose data.
    Ok, thanks
    I want to check this tutorial http://www.intowindows.com/how-to-install-windows-8-1-on-mac-without-boot-camp/ It´s about install Windows 8 without bootcamp.
    I tell us

  • How to install Windows on MAC? (Can't see the check box "Install or remove Windows 7 or later version" on Boot Camp Assistant)

    I want to install Windows 7 on my MBP mid 2012 but in Boot Camp does not appear the check box: "Install or remove Windows 7 or later version". I continued with making the USB bootable with Windows 7 but then when I restart and boot with the USB I still can't install Windows because then I receive an error: ""Windows cannot be installed on this disk. The selected disk is of GPT partition style."  
    From OS with Boot Camp I didn't manage to make a partition for Windows instead I made one with Disk Utility (formated FAT).
    After booting from USB that partition was also formated into NTFS necessary for Windows. Still the same error.
    Any idea how to install Windows on my MAC?

    My Windows copy is a X64.
    MBP mid 2012 with Mountain Lion 10.8.3.
    Model Identifier:          MacBookPro9,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Boot ROM Version:          MBP91.00D3.B08
      SMC Version (system):          2.2f41
    Should have:
    MacBook Pro (13-inch, Mid 2012)
    MacBookPro9,2
    MBP91.00D3.B08 (EFI 2.9)
    If you are refering to this I tried to update the EFI version (I see only SMC version 2.9 as a diferrence of what I have)  but on installing I received an error: "This software is not supported on your system."

  • How to install Windows on a SATA boot drive

    Here is how to install Windows XP on a SATA boot drive.  This procedure was first developed by syar2003 and has been used by many iusers ncluding myself.   Although it was originally developed for Neo2 mb's and Windows XP Pro, it has general applicability to systems as well.
    1.  Have only the SATA drive you want to be the boot drive active in your system.  Disconnect the power to all other HDD's if any.
    2.  Have only one optical drive active. Disconnect the power to the other opticals if any. (Best to have a burner optical as master on IDE1.)
    3.  Plug SATA drive into SATA 1 on the mb.  (it may show us as an IDE drive somewhere down the list in BIOS.  That's okl)
    4.  Enable appropriate SATA options in BIOS.  Set boot order to floppy, cd, SATA drive.  Set boot priority to SATA drive.
    5.  Partition and format the SATA HDD using the utilites CD that came with the SATA drive.  (If you don't have an HDD utilities disk, download one from the website of your HDD manufacturer.)
    6.  Run Windows  setup.  No need to load drivers at the F6 promt unless you are planning to do a RAID configuration.
    7.  Windows XP should install without incident.
    8.  After you are up and running, plug the power back into your other HDD and optical drives if any.
    If you have a board older than the K8 series, it may be necessary to load the SATA drivers at the F6 prompt.  If the above procedure does not work, than try it again loading the SATA drivers.
    If this procedure does not work for you, it is likely that your particular SATA HDD has some compatablity problem with Windows setup and/or your motherboard.  The solution to this is to try another SATA drive.  In general, most failures using this procedure have been traced to certain WD, Seagate and Hitachi SATA drivers of smaller capacities.  Fewer problems seem to have occured with Maxtor HDD's.

    Kaplan, from an earlier post of mine regarding sata2 hdds - I have them plugged into the sata1&2 ports, installed the nvidia raid first and then installed winxp (in both raid 0 and raid 1).  My bios is 3.1 and its a known problem that bios 3.3 & 3.4 have nvidia raid problems but seems to be fixed in the beta bios 3.53:
    I just purchased 2 hitachi deskstar sata2 80gb hdds ($60 each at zzf) and the interesting thing about them is that you have to "enable" sata2.  I have been testing the performance of sata1, sata2, raid1 and raid0 and the results are below.   
    The drives themselves are factory default set at sata1. Since I purchased OEM, no software or instructions were included.  I had to go to the hitachi website download section to download a dos based program (the features program) to enable sata2.  After enabling the hdds to sata2, they were recognized in winxp in the nforce ADMA controller device driver and the screen reads with the primary channel as Serial ATA Generation 2 - 3G...and all 4 boxes below it are checked (the boxes enable bios select xfer mode, enable read caching, enable write caching and enable command queuing are checked).  An interesting thing about the sata2 spec is that all sata2 hdds must come standard with NCQ...its not advertised on these 80 gb hdds on the hitachi website (unlike the larger hitachi sata2 hdds) but its a standard sata2 spec and these 80gb hitachi hdds are recoginized in winxp as sata2.
    The other interesting feature about the hitachi sata2 hdds is setting them up to operate in an adjustable "performance" to "silence" mode.  The hdds are default set at high perfromance but you can manually lower the performance to increase the silence of the hdds which is fully adjustable to your liking.  I tested the highest silence/lowest performance setting and you cannot hear the hard drive at all. 
    Testing - I tested the 2 hitachi sata2 deskstars with the first result in sata1 mode, the second in sata2 mode, the third in raid1 mode and the fourth in raid0 mode.
    First, a significant increase in raid0 over sata1, sata2 and raid1 with sequential reads and writes (PC Wizard).
    Write: 28mb/s vs 29mb/s vs 27mb/s vs 53mb/s
    Read: 45mb/s vs 46mb/s vs 43mb/s vs 83mb/s
    Second, significant increase in sata 2, raid 1 & raid 0 over sata1 with buffered reads and writes (PC Wizard).
    Write: 104mb/s vs 176mb/s vs 165mb/s vs 266mb/s
    Read: 123mb/s vs 200mb/s vs 200mb/s vs 293mb/s
    Third, significant increase in sata 2, raid 1 & raid 0 over sata1 with burst reads (HD Tach).
    Burst Read: 133mb/s vs 225mb/s vs 219mb/s vs 334 mb/s
    It is interesting to note that raid1 is better than sata1 but marginally slower in all tests over sata2.  Raid0 is significantly faster on all tests.   

Maybe you are looking for