How to keep file name on "Insert as new"

If a record has a related file, the file-name is stored in a field of that record.
When you open the record and choose "Insert as new" everything is copied to a new record, except this file-name.
How to save this file-name too?
thanx

Hello,
Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
               System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
            CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
               pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PaperSize = (CrPaperSizeEnum)
                    pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
            // this sets the name of the print job
            rasPROpts.JobTitle = "MYPrintJob";
               rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
               MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

Similar Messages

How to keep file name in print queue when printing crystal report

We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6
When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document. How to keep the original file name? In the past when we were using Crystal Report 11, the original file name can be shown in the print queue.
Please help because it's so important for operation to see which report is failed in printing when reports are printed in batch.
Thanks

Hello,
Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
               System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
            CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
               pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PaperSize = (CrPaperSizeEnum)
                    pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
            // this sets the name of the print job
            rasPROpts.JobTitle = "MYPrintJob";
               rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
               MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

How to keep file name formatted?

I need to generate .xlsx file as reporting purpose without renamed for
example :- File names end with YYYYMMDD format for the day they are generated.
Is that possible I can set up that kind of job?

see
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to place file names with thumbnails?

I have several thousand images that need to go online but I cannot for the life of me figure out how to add file names to the thubnails. Every bit of documentation I've read talks about adding it to the larger images only. I figured that part out but can't I have file names for the thumbnails too?

Bummer. I was hoping for a secret key to take me there. I have too
many images that can be scanned via thumbnails and for the detail
shots they can go larger. There is no way I can use this as it is with
9000+ images that need to be gone through quickly. Thanks for the
answer.
Mark

How to edit file names.

How to edit file names.

Right click the file and choose "Rename".
Type the new name and press "Enter".

How to add file name by sqlldr

Hi All,
Can anyone kindly give me an approach to use a variable in a sql loader ctl file. I am trying to add the value before each insert of row and this value is the file name. So the question is how can I dynamically identify the input data file name, if not, is there a way I can make my SQL Loader to insert a value (file name) before each row into the table.
my control file like below ,
LOAD DATA
INTO TABLE "user"."AAA_BILL"
APPEND
REENABLE DISABLED_CONSTRAINTS
EXCEPTIONS "USER"."AAA_BILL"
FIELDS TERMINATED BY '|'
(Streamnumber ,
MSID ,
UserName,
Domain,
UserIP ,
Correlation_ID)and the loading script as below ,
for j in $(GetFileNames)
do
let i=$i+1
sqlldr user/pass control="/u01/ctrlfile/loadBILLDtl.ctl" log=$WiMAXlog$j.log data=$WiMAXsource$j bad=$WiMAXlog$j.bad
GetFileNames ()
sqlplus -s user/pass << EOF
set echo off
SET FEEDBACK OFF
SET heading off
set pagesize 50000
select bi_file_name from dbm_bill_head where bi_file_name like 'WiMAX_%' and bi_auto_status=35 order by bi_file_name;
EOF
}What I am trying to accomplish here is, I want to insert the data file name along with other data in the data file into table AAA_BILL and this table has the file name coloumn, but the data file does not contain the file name as one of its contents.
Note : my DB is 10G and OS is RHEL
any help please ,
Edited by: 876602 on 18/12/2011 05:44 ص

Hi,
Now it is working just well.
I kept 2 variables: one with the POSIX file path for my do shell script and another one (using the provided tip here) for the Applescript function.
The only problem I had left was that teh file was writen in, maybe, UTF8 so I added to the open for access a "as text" at the end to make the file as straith text file.
I always found languages like Applescript a little bit hard to learn. Strangely, I have less difficulty with Cocoa!
Thanks for avery one here!

Using Actions to SaveForWeb: Unable to keep file name

ENVIRONMENT:
start with an AI document, saved as an eps.
I have Actions to format the graphic. (one layer)
GOAL:
Am trying to automate a Save For Web, resize and KEEP THE FILE NAME, with only the file TYPE changing.
PROBLEM:
I wrote an Action specifying a particular folder to save the jpg to. If i run the Action it will default to the name it was originally saved with. For example, one.eps will save as one.jpg. two.eps will save as one.jpg.
If i delete or rename the folder, the file name will default to the FOLDER NAME. For example one.eps will save as "ExportFolder.jpg"
MY QUESTION:
Does anyone know how to make it keep the file name of the individual file? or any other tips on using Actions to export.
Thanks.

I understand what you are saying but for some reason I'm not able to get my code working based on the below, can you see what I might be doing wrong? My script isn't erroring but I'm second-guessing if I'm actually connecting. I had to
use the webclient in the Get-FtpDir otherwise the script would fail. Thanks!
$url = "ftp://##.#.#.#/"
$user = "username"
$pass = "123456"
$credentials = new-object System.Net.NetworkCredential($user, $pass)
$webclient = New-Object System.Net.WebClient
$webclient.Credentials = New-Object System.Net.NetworkCredential($user,$pass)
$target = "\\computername\C$\FTP\Download\"
function Get-FtpDir ($url,$webclient) {
    $request = [Net.WebRequest]::Create($url)
    $request.Method = [System.Net.WebRequestMethods+FTP]::ListDirectoryDetails
    if ($credentials) { $request.Credentials = $credentials }
    $response = $request.GetResponse()
    $reader = New-Object IO.StreamReader $response.GetResponseStream()
$reader.ReadToEnd()
$reader.Close()
$response.Close()
$folderPath="ftp://##.#.#.#/folder/folder/"
$files=Get-FTPDir $folderPath
Foreach ($file in ($files | where {$_ -like "Test_*.txt"})){
$source=$folderPath+$file
$WebClient.DownloadFile($source, $target)
CINDI

How to delete file names from Adobe Reader list

How can I delete file names from the Adobe Reader list? I have deleted the file & it's empty, but deleted file names remain in my list & it's very annoying. I can't seem to find an option anywhere to delete the file names.

Thanks for the answer, I will try this & post my results with this method. I have set the amount to zero, & it seems if I want to put back valid files into my list I first need to find them in another file in my pc, such as documents, open them in Adobe Reader, & then then they will reappear in the Adobe Reader list. Is this correct? Thank you!
This seems to be the case, you need to restore each file you want in your list one by one by accessing them elsewhere on your pc, & then you must open them with Adobe Reader to have files reappear in your Adobe Reader list. However, this seems to be a tedious process if you only want to delete one obsolete file from your list by first emptying the list & rebuilding it file by file. It works, but I'm wondering if there is a more sensible & efficient way to do this?

How to pass file name as parameter into url: or fo:external-graphic src

Hello gurus,
In my rtf I want to dynamically get the name of the image file and display the image in the report. If use hard coded image file name it works but if I try to get the name into a variable and pass that variable it is not working.
Basically my client is having different logos for each operating unit. in the OA_MEDIA directory there are separate logos for each OU. during run time based on OU name we need to display the corresponding image. If I can get this entire path($OA_MEDIA/logo.jpg') in XML field<?CF_OU_LOGO?> then I'm able to print the logo using url:{CF_OU_LOGO}
But I'm using seeded data source and I cant modify the data source, I need to handle this in RTF only. I could able to get the file name into a variable but not sure how to pass to url.
could some one help me on this. I tried the following options
<fo:external-graphic src="url($ln)" />
url:{$ln} in web etc...
here 'ln' is the variable which holds '$OA_MEDIA/logo.jpg'. ln is defined as <xsl:variable name="ln" select=".//CF_OPERATING_UNIT" />
later I set the values as <?xdoxslt:set_variable($_XDOCTX, 'ln',translate( concat('${OA_MEDIA}/','Logo',.//CF_OPERATING_UNIT,'.jpg'),' ',''))?><?xdoxslt:get_variable($_XDOCTX, 'ln')?>
thanks,
Vijay

Vijay
What version of EBS is the customer running? I read somewhere that in R12 all of the concurrent parameters are passed to the XMLP template. I have not tried this but if true. You could create a conc program parameter that would hold the location of the image. You could either have the user pick the image or maybe derive it from the other parameter choices.
Lets assume the token name is DLOGO you can reference that in your template.
<?param:DLOGO?>
this needs to be at the top of the template. Then where you need to embed the image just reference the value using
$DLOGO
You can embed this in the external graphic field
As I mentioned I have not tested it yet, hopefully its there, if not there are ways around it. Try it first.
Tim

How to get File name in Proxy program

Hi,
According to my business scenario, one XML file name comes from Legacy system and stores in a predefined directory. Now XI has to pick up that XML file and needs to call BAPI's which in turn updates the Target system ( SAP Tables).
Now my problem is , XML File name is a combination of three fileds those are DATE , OBJECTKEY AND WORKFLOWNAME.
Ex : YYYYMMDD_1234565789_WORKFLOWNAME.XML
DATE_OBJECTKEY_WORKFLOWNAME.XML
In proxy i need to get the file name and split into three fields ( those are DATE , OBJECTKEY AND WORKFLOWNAME ) which needs to send as import parameters in BAPI's.
So please let me know from anyone in this group how to get the file name in the proxy program.
Thanks & Regards
K. naveen Kumar

Hi,
have a look at my new weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
to see how you can access filename
Regards,
michal

How to generate file name dynamically in receiver FIle adapter? Please help

Dear Experts,
   I have a scenario where I need to generate output file with the name dynamically pulled from the XI payload.
   In receiver File communication channel I don't see any option where we can specify the XML path for the file name.
   For example:
   If my inbound XML structure (inbound interface) is like below:
   <filename>file123.txt</filename>
   <RootNode>
         <Element1>Product123</Element1>
   <RootNode>
From this I need to pick the filename value and generate the output file with the same value.
How can I achieve this? Please help!
Thanks & Regards
Gopal
Edited by: gopalkrishna baliga on May 3, 2011 1:10 PM

Gopal,
You can use DynamicConfiguration class for this.
You need to write UDF for this and with input of filename you want to set and map this UDF to the top level node.
Refer the below famous blog from Micheal:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
You can also use Variable substitution to get value from payload, search SDN on this.
--Divyesh Vasani

How to print file name and date on document

How can we print the file name and date, like in the old days, on a document as a header or footer?

Not the print dialog for iWork but in the app itself. Here is Pages:
Regards,
Colin R.

How to set file name and destination folder without user interaction

how can I set the file name and destination folder to generate a pdf file like "c:\myfolder\document.pdf" in this folder automatically.
Is there a tag in .joboptions ?
Goal: User click print button. In the background a pdf will be generated in e.g. "C:\myfolder\document.pdf".
that`s it.
I know that the query dialog for save as can be turned off. But the file name depends on the application.
Thanks for your help.
TK

Hello,
Please post this in PI forums
Regards, Anil

How to set file names?

Using TCS 5, RH11, FM12, all patched up, if I set a marker, such as "Filename" in FrameMaker, can RoboHelp use the contents of that marker to set the file name of the HTML file it creates? How? Thoughts?
Cheers,
Sean

Hi,
Thanks for working with me on this. I appreciate your help. The last time I used RoboHelp was when Blue Sky owned it, at the original version 6. I see it has aged logically.
Cheers,
Sean

How to retain file name while saving file on archive servers

Hi Experts,
I am using function modules:
ARCHIVOBJECT_CREATE_TABLE and ARCHIV_CONNECTION_INSERT for inserting a file to archive server and for linking it with a document.
Then I am reading the URL using FM: SCMS_AO_URL_READ. When I get this URL and download that file, the file name will be always defaulted to 'pclHTTP.dll'. I debugged these FMs to a certain extent and found that this name comes from CREP_HTTP-HTTP_SCRPT table.
Is there any way I can retain the file name while saving it so that when I read the URL it has correct file name in it?
Please help.
Regards,
Anand Kolte

Hi Max,
In case when downloading one file it is fine. But if I want to download 10 files at once and later if I go to my downloads, every file will be having similar name. Unless we open the file, we cannot know what file it is.
Regards,
Anand

How to keep file name on "Insert as new"

Similar Messages

Maybe you are looking for