How to kill back ground processes?

I had installed Amonitor app and it shows there are these 3 processes, poc-bbot, bash, cp running. It was never there. can anyone tell me how to kill it?

Hi, thanks.
Actually these 3 processes has never shows up. And yes, i was kill all the apps once i dont use them. my recently open bar is always empty.
The reason why i has concern is my bat life is shorter when these 3 processes are running. It used to has this, so i restore to factory mode. then after awhile, these came back.

Similar Messages

Back ground processes, dialogue processes and Process chains

Hai all,
I am going through making process chains and I am struck with one thing:
"How many background process chains and dialogue processes you have during run time"
This is the problem. I understood everything else except this.The concept says that I have to know what is the capacity of the system, how many background and dialogue processes it could accomodate, how many are left and how many you can use for your process chain.How do we find out this? and could somebody please explain me or refer to documentation about the Back ground processes, dialogue processes and Process chains.
Thanks.

Hi Visu,
You can see the number of dialog and background processes by using transaction SM51 and then double clicking on the server (we only have one but it may be different for each). Our BASIS folks take care of the number of processes as well. And, for us we have a schedule that changes the number at a certain time of day because you tend to need more dialog during the day but more batch at night.
The transaction to look at and change the settings is RZ03. Then use the menu path Edit->Operation Modes you can select either Configuration or Timetable here. Both give information in different ways. I tend to double click around to see what it might tell me.
I hope this helps a bit,
Diane

Back Ground Process In OOABAP

Hi all,
How can i process Back ground process on Object oriented
Thanks Rayeez,

Hi Rayeez,
I had a requirement wherein I had to call ALV Grid display in background, here I used OO ABAP and just before creating the custom container I checked IF cl_gui_alv_grid=>offline( ) IS INITIAL.
You can find similar methods for your OO Class and check if it is initial.
Please reward points if it helps.
Regards,
Amit Mishra

WorkFlow Back Ground Process Running More Time

Hi all,
I have very Big problem it is occured in production i need help vary urgent for this .
Work flow Back Ground Process Running More than 5 hrs,actualy Daily it is running only below 2 min .but yesterday onwords it is running more than 5 hrs.but this workflow back ground process running long time only one item_type='REQAPPRV' REMAING item_types running normaly.
i did have any root cause for this performance issue plz let me know any one for this problem what is the root cause.
Thank's

Reddy,
Go through the following documents, it should be helpful in troubleshooting the issue.
Note: 186361.1 - WF 2.x: Workflow Background Process Performance Troubleshooting Guide
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186361.1
Note: 298550.1 - Troubleshooting Workflow Data Growth Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=298550.1
Note: 566577.1 - Workflow Background Process Has Significant Performance Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566577.1
Note: 743338.1 - Performance Degradation when the Workflow Background Process is Running
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=743338.1
Note: 734425.1 - How To Generate Performance Trace for Workflow Background Process?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=734425.1
If this is your production instance and the issue is urgent, I would suggest you log a SR.
Regards,
Hussein

How to map back charge process

Hello friends,
I need help to map below scenario in SAP:
We have third party business process, where vendor V1 is supplying material to customer. When customer receives material; V1 invoices us and we make payments to V1.At this point PO is closed for vendor V1.
Now if customer faces any problem with material, then we call local vendor V2 to repair or service the material. What ever charges come from local vendor is suppose to reimburse by vendor V1.
Now how can we link V2 vendor invoice amount to V1 invoice. What will be the document flow? How to map back charge process .
Note:
We have considered adding negative line items to the existing PO but understand this is not possible once payment has been issued and the PO is closed.
We have considered creating a u201Creverse sales orderu201D but do not want to create a separate order or handle the vendor under a separate sold-to account (as a customer)
We have considered a manual FI invoice but do not want to handle the vendor under a separate sold-to account (as a customer)
Seeking valuable inputs from experts.
Regards
Ravi

Hi Raghavendra
Yes V2 exist in SAP, right now we create new purchase order to V2 for services for material at customer location, after his service we do payment to V2 and same amount is charged to V1.
While charging V1 , we need to treat V1 as a customer( sold to party ) , which we donu2019t want , and direct clearing from FI is also not fusible as we again need to treat V1 as customer ( sold to party ) .
Our requirement is to map using some credit memo or debit memo or any other documents.
regards
Ravi

How to kill a BPM Process

Hi Guys,
I want to know how to kill a BPM process.
any help would be appreciated
Thanks,
Srini

Srini,
Refer this -Re: How to stop infinite loop?
raj.

Back ground processing of the LDAP

Hi,
We are on XI3.1, SP2.
We are using LDAP authentication.
We wants to know the back ground processing when a using login to the deski using LDAP authentication.
Any one please help on this.
Thanks in advance.
Thanks & regards,
Collin Powell.

When logging with client tools the LDAP logon will be sent from the client, then the username will be authorized by the CMS which will in turn send a number of queries to the LDAP server to verify group membership. The variables include, graphtimeout (set or not) version/patch of BO (this behavior is different in 3.x vs XIR2 and even different in XIR2 SP2 vs SP4.
If you are not using SSL then all the traffic can be packet scanned using a tool like Micr4osoft netmon or wireshark.
Regards,
Tim

How to analyse Back Ground Jobs in BI

Hi,
How to analyse Back Ground Jobs in BI
RSDB2MA1 and RSDB2MA2
My requirment is to check the error logs for these job
How to navigate there
Thanks

Dear BW user,
Sm37 and sm50/51
1)Go to Sm37
2) Give the job name and in user give as *
3)press execute or f8
4) Press job log in the screen..keep refreshing it for update
5)Press job detaisl..get pid no and wp no..in it
6) go to sm50/51
check for given wp no... and pid no..job is running or waiting or not
sm66
1)go to sm66
2)in sm66 you can see only the central instance job running in
3)You cant find any application server in it
Hope it helps you,Revert me back if you have any queries
Assign points if helpful
Regards
Bala

Regarding back ground processing for excel.

Hi,
i want to create the Excel sheet and i want to save in Back ground Processing....
give me some suggestionss.......................

This can create any file (spreadsheet/plain text/ dat files). but to add workbooks to the sheet you need to use OLE Object concepts.
PARAMETERS: p_terms(256) TYPE c OBLIGATORY,
 p_del(1) TYPE c OBLIGATORY DEFAULT cl_abap_char_utilities=>horizontal_tab.
DATA: lv_str TYPE string,
 lv_char(256) TYPE c,
 lr_descrref TYPE REF TO cl_abap_typedescr.
FIELD-SYMBOLS: <comp> TYPE ANY.
IF itab IS NOT INITIAL.
 OPEN DATASET p_terms FOR OUTPUT IN LEGACY TEXT MODE .
 IF sy-subrc EQ 0.
 CLEAR : lv_str.
Header of the file
 CONCATENATE
 'Action'
 'Name'
 'EE User ID'
 'Termination Date'
 'Last Day Worked'
 'End Of Notice'
 'Employee Type'
 'Department'
 'Department_type'
 'Office Location'
 'Manager Name'
 'Has Cellphone'
 'Has Home Office'
 'VP and Above'
 cl_abap_char_utilities=>cr_lf
 INTO lv_str SEPARATED BY p_del.
 LOOP AT itab INTO ls_terms.
 WHILE sy-subrc EQ 0.
 ASSIGN COMPONENT sy-index OF STRUCTURE ls_terms TO <comp>.
 IF sy-subrc NE 0.
 EXIT.
 ENDIF.
 lr_descrref = cl_abap_typedescr=>describe_by_data( <comp> ).
 IF lr_descrref->type_kind = 'P'.
 WRITE <comp> TO lv_char DECIMALS 2.
 ELSE.
 WRITE <comp> TO lv_char.
 ENDIF.
 SHIFT lv_char LEFT DELETING LEADING space.
 IF sy-index NE 1.
 CONCATENATE lv_str lv_char INTO lv_str SEPARATED BY p_del.
 ELSE.
 CONCATENATE lv_str lv_char INTO lv_str.
 ENDIF.
 CLEAR: lv_char.
 ENDWHILE.
 TRY.
This statement passes the content of data object to the file specified
 TRANSFER lv_str TO p_terms.
 CATCH cx_sy_file_authority .
 FORMAT COLOR 6 ON.
 WRITE:/ 'No authorization to access the Term file'.
 ENDTRY.
 CLEAR lv_str.
 ENDLOOP.
 CLOSE DATASET p_terms.
 ENDIF.
ENDIF.

Error in BDC Back Ground Processing

Dear All,
I am facing problem on while executing BDC program. First i am executing in Foreground method there it displaying errors occured,
means it showing full discription or error.
But when i used Back ground processing its displayig the full error discription like "No posting object defined for 1230/ / / " here i need full error discription.
please do the need full.
Regrads,
Srinivas.

Hi
In background processing you cannot see the error message, for that you have to write logic for capturing messages.
Use 'Format_Message' function module so that you can get the complete message and then you can display that on the screen.
Hope it helps...

Create back ground processes

Hi all,
I want to create back ground processes in BI to trigger my process chain variant.
Please tell me the steps to create this.
Please suggest the step by step doc.
Regards,
Macwan James.

hi,
When you try to schedule and activate a process chain , it will directly create a background job "BI_PROCESS_TRIGGER" which will start the process chain .
So directly it will assign the process chain to background job.
If you want to run PC once job finishes then -->, you will find an option while scheduling the process chain. Right click on Start variant and select "maintain variant" --> Select "Change Selections" --> Click on "After Event/After Job". Give the event name in the provided area in that screen. Now your process chain will execute after an event/job which runs in the background.
Hope it helps
Lavanya

What differences if we kill SMON or we kill PMON Back ground processes ??

Hello
i am little bit confused.Please help me out...
If we kill PMON---->Instance crashed---->Alert log content
LGWR (ospid: 9764960): terminating the instance due to error 472
Instance terminated by LGWR, pid = 9764960
If we kill SMON---->Instance crashed---->Alert log content
PMON (ospid: 13041666): terminating the instance due to error 474
Instance terminated by PMON, pid = 13041666
2010-12-27 07:31:04.187000 +01:00
Then ,what is the difference in mechnism in killing either to SMON or PMON???

Oh..wait...I just asked this question due to curiosity about what happen INTERNALLY when we kill any BG process(specially mandatory).
For testing..I kill all the process in each attempt and found some similar and some different lines in alert log.
Kill PMON:
LGWR (ospid: 9764960): terminating the instance due to error 472
Instance terminated by LGWR, pid = 9764960
Kill CKPT:
PMON (ospid: 6553606): terminating the instance due to error 469
2010-12-27 12:08:51.650000 +01:00
Instance terminated by PMON, pid = 6553606
Kill SMON:
PMON (ospid: 13041666): terminating the instance due to error 474
Instance terminated by PMON, pid = 13041666
Now,is any knowledge about these error nos(472/469/474) ???
What happen internally when we kill PMON or SMON ??

What is back ground processing

what is difference between background and fore ground processing of a report. what are the various methods to execute a report in back ground. and when we need schedule a report in back ground how shall we handle selection screen parameters.
thanx in advance.

Hi,
Background Processing
There are two ways for you to handle,
one manually setting up the job through SM36 which is better and convinient,
secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
Find below steps in doing both:
Procedure 1:
1. Goto Trans -> SM36
2. Define a job with the program and variant if any
3. Click on start condition in application tool bar
4. In the pop-up window, click on Date/Time
5. Below you can see a check box "Periodic Job"
6. Next click on Period Values
7. Select "Other Period"
8. Now give '15' for Minutes
9. Save the job
In SM37 u can check the status of the jobs that u have assigned to background...
Here u mention the job name or the report name to check the status of the job...
After mentioning the job name or program name u just execute it.. ( without any name also u can execute then it gives u all the jobs set by your user name..
the status colud be released,active,finished etc..
Procedure 2 via Program:
Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
 L_RELEASE(1) TYPE c.
 CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 JOBNAME = 'ZTEMP2'
 IMPORTING
 JOBCOUNT = P_JOBCNT
 EXCEPTIONS
 CANT_CREATE_JOB = 1
 INVALID_JOB_DATA = 2
 JOBNAME_MISSING = 3
 OTHERS = 4.
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
 TO SAP-SPOOL WITHOUT SPOOL DYNPRO
 WITH DESTINATION = 'HPMISPRT'
 WITH IMMEDIATELY = SPACE
 WITH KEEP_IN_SPOOL = 'X' AND RETURN.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 JOBCOUNT = P_JOBCNT
 JOBNAME = 'ZTEMP2'
 STRTIMMED = 'X'
 PRDMINS = 15
 IMPORTING
 JOB_WAS_RELEASED = L_RELEASE
 EXCEPTIONS
 CANT_START_IMMEDIATE = 1
 INVALID_STARTDATE = 2
 JOBNAME_MISSING = 3
 JOB_CLOSE_FAILED = 4
 JOB_NOSTEPS = 5
 JOB_NOTEX = 6
 LOCK_FAILED = 7
 INVALID_TARGET = 8
 OTHERS = 9.
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Hope the above helps you.
Regards
Reshma

How to kill an instance process in BPM studio 6.0

Hi i'm Fabio.
I'm working on BPM Studio 6.0 and i need to complete a task.
I have an instance id process, and i need to create a new process in order to kill this istance id.
I read how to create a PAPI client (http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/papi/index.html?t=modules/papi/c_Writing_Your_First_Java_PAPI_Program.html) but it doesn't work for my purpose.
First of all, i understood that i have to follow these step:
* Import the required libraries.
* Create a process service.
* Create a process service session.
* Perform operations with PAPI.
* Close the process service.
Now, i'm working on my xpdl file and i'm using the Standard Module "Fuego" and my plan is to create a process servcie, a process service session and then operate with PAPI.
But using the PAPI module include in the BPM studio 6.0 i'm no able to load the library for the session import fuego.papi.ProcessServiceSession;
so i'm worng something. Could you tell me how can menage this problem? Really do i need a session? Is possible to abort an istance process in BPM studio or i need to load my ear project in Enterprise environment and then kill my instance process? Thanks, regards Fabio.

Thanks Dan, i read your suggestion but my boss was to implement a different solution:
package hp.abort.process;
import fuego.boot.*;
import fuego.papi.CommunicationException;
import fuego.papi.InstanceInfo;
import fuego.papi.InstanceId;
import fuego.papi.ProcessService;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import java.util.Properties;
import javax.transaction.*;
import java.lang.Exception;
public class AbortProcess {
public static void main(String[] args) {
/////////////////// API Initialization ///////////////////
Properties configuration = new Properties();
configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
configuration.setProperty(ProcessService.PROJECT_PATH, "C:/Documents and Settings/Administrator/AlbpmWorkspace/EarOMatic");
configuration.setProperty(ProcessService.WORKING_FOLDER, "C:/tmp");
try {
ProcessService processService = ProcessService.create(configuration);
/////////////////// Establish a session ///////////////////
ProcessServiceSession session = processService.createSession("adminEarOMatic", "adminEarOMatic", "localhost");
/////////////////// Operate with PAPI ///////////////////
for (String processId : session.processesGetIds()) {
System.out.println("\n Process: " + processId);
for (InstanceInfo instance : session.processGetInstances(processId) ) {
System.out.println(" -> " + instance.getId());
System.out.println("ActivityName -> " + instance.getActivityName());
System.out.println("ActivityId -> "+ instance.getActivityId());
//Problema: nn vuole ActivityId ma Process Id
session.activityAbort("/CreateEurekaSRService#Default-1.0/eomWait","/CreateEurekaSRService#Default-1.0/1/0@EarOMatic");
/////////////////// Close the session ///////////////////
session.close();
/////////////////// Release API Resources ///////////////////
processService.close();
} catch (CommunicationException e) {
System.out.println("Could not connect to Directory Service");
e.printStackTrace();
} catch (OperationException e) {
System.out.println("Could not perform the requested operation");
e.printStackTrace();
Now, i got the following exception:
Local folder C:/tmp\system\Schema-4154784351820594721\catalogs found.
Loading catalogs from local folder: C:/tmp\system\Schema-4154784351820594721\catalogs
0 jars found locally.
[CatalogMgrCache] =======================
Registering CatalogMgr [EarOMatic] ...CatalogManagerCache 10390580:
Managers:
Counters:
[CatalogMgrCache] =======================
CatalogMgr [EarOMatic] REGISTERED!CatalogManagerCache 10390580:
Managers:
{EarOMatic=fuego.util.LocalCatalogManager@106df95}
Counters:
Process: /AbortInstanceProcessService#Default-1.0
Unreachable Engine Tolerance (seconds):
by default: 0
to be used: 0
This papi client will not cache exceptions which imply that an engine could not be reached.
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=3] to 2
Process: /CreateEurekaSRService#Default-1.0
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=3] to 2
-> /CreateEurekaSRService#Default-1.0/1/0
ActivityName -> eomWait
Adding local catalog for project: 1
ActivityId -> /CreateEurekaSRService#Default-1.0/eomWait
Exception in thread "main" fuego.server.exception.InvalidIdRuntimeException: Invalid identification.
Detail:Invalid identification (Identification value: /CreateEurekaSRService#Default-1.0/eomWait)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:632)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
     at fuego.component.CustomExecution.next(CustomExecution.java:172)
     at fuego.component.ExecutorClient.invoke(ExecutorClient.java:118)
     at fuego.papi.impl.rmi.ProcessControlProxy.abortActivity(ProcessControlProxy.java:407)
     at fuego.papi.impl.rmi.ProcessControlProxyWrapper.abortActivity(ProcessControlProxyWrapper.java:683)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
     at fuego.papi.impl.rmi.RMIProcessControlHandler.invoke(RMIProcessControlHandler.java:165)
     at $Proxy23.abortActivity(Unknown Source)
     at fuego.papi.impl.ProcessInstanceOperation.abortActivity(ProcessInstanceOperation.java:726)
     at fuego.papi.impl.ProcessServiceSessionImpl.activityAbort(ProcessServiceSessionImpl.java:184)
     at hp.abort.process.AbortProcess.main(AbortProcess.java:45)
Caused by: fuego.metadata.exception.InvalidIdException: Activity '/CreateEurekaSRService#Default-1.0/eomWait' was not found in process '/CreateEurekaSRService#Default-1.0'.
     at fuego.metadata.Process.getActivity(Process.java:261)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:629)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
I understood that tha activity id's format is not valid, but i obtained it just using the following function: instance.getActivityId()
Are you abel to give me some suggestion? Is it good this method to kill instance?
Thanks a lot, regard Fabio.

Help: how to kill a bpm process

I create a bpm process with an infinite loop and my server crash everytime.
How to kill this process.

Hi Capro
Log into NWA
Navigate to manage processes
NWA-> Operation management -> Processes and Tasks -> Manage Processes
Select the nasty process instance and click on Actions> Cancel
By doing so you will be canceling the process instance and this will help in saving your server from crashing
If you are using 7.20 there are options to handle this too from BPM System Overview
Regards,
Harsha

How to kill back ground processes?

Similar Messages

Maybe you are looking for