How to know whether sequencefile has loaded or not?

Customizing user interface.
I "reload sequencefile on start". And do not use SequenceFileView. Some sequencefile spends a long time for loading. And sometimes, reference of sequencefile should be empty. Because the sequencefile has being delete, or did not open any file last time, etc.
I need feedback from TS engine. How to get it?
Solved!
Go to Solution.

I think the following excerp from the TestStand help answers your question:
SequenceFiles Property (Read Only)
Syntax
ApplicationMgr.SequenceFiles
Data Type
SequenceFiles
Purpose
Collection of sequence files the application opens.
Remarks
This property eliminates the need to keep an array of open
sequence files. Use the ApplicationMgr.OpenSequenceFile
method to add files to the collection and the ApplicationMgr.CloseSequenceFile
method to remove files from the collection.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

  • How to know whether User is Buyer or not?

    Hi,
    I am developing a function module to create/update/unassign Employee Org Hierarchy. In this I have to know whether User is BUYER OR NON BUYER?.
    If user is assigned to purchase org/purchase group then he will be BUYER or else he will be NON BUYER. If once I come to know whether user is BUYER OR NOT, then I have to proceed further differently in both the cases.
    Pls help me out in this regard asap.
    Thanks & Regards,
    Nagaraju Maddi
    Message was edited by: Nagaraju Maddi

    Nagaraju
    Buyer will be having purchaser roles like SAP_BBP_STAL_PURCHASER, SAP_EC_BBP_PURCHASER, SAP_EC_BBP_ST_PURCHASER. Check the roles of the users. If you find Purchaser(standard roles) or Buyer(in case of customized roles) in their roles then he/she will be buyer.
    Similarly Non buyer user will be having Employee role like SAP_EC_BBP_EMPLOYEE.
    Hope this will help you.
    Do reward points for helpful solution.
    Regards
    Jagdish

  • How to see whether GR has been done on PO or Inbound Delivery

    Hi Gurus
    How to know whether GR has been done on PO or inbound delivery. Is there any report or tables through that we can see this.
    Regards
    Irfan

    Hi
    If you check the material document posted for GR it should specify
    If the GR is done with respect to Inbound delivery then the inbound delivery number will be in material document if I remember it correctly.
    Please check and advice
    Deepak

  • How to know whether the javascript is disabled or not while loading the jsp

    Hi,
    My query is like how to know whether the javascript is disabled or not while loading the Application main JSP in Mozilla browser.
    I want some Java code or JavaScript code.

    To the point, just let JS fire a specific HTTP request inside the same session.
    This can be done in several ways. 1) Create a hidden <img> element and set the `src` attribute so that it will request a (fake) image from the server. The server just have to intercept on this specific request. 2) Fire an ajaxical request and let the server intercept on it. You can use a Filter for this which sets a token in the session scope to inform that the client has JS enabled.

  • How to know whether balance carry forward has happened or not

    How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?

    If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
    If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
    You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a  previous fiscal year are automatically carried forward to the current year after that initial run.

  • How to know whether the current database is using a password file or not?

    How to know whether the current database is using a password file or not?

    The remote_password_file is the parameter that determines if you can use or not a password file. The values this parameter can have are NONE, SHARED, EXCLUSIVE. It is pretty obvious, if it is set to either SHARED or EXCLUSIVE the oracle instance has enabled the access through a password file for the SYSDBA and SYSOPER roles.
    ~ Madrid

  • How to know whether a connection leak occured in weblogic8.1

    How to Know whether Conenction Leak has Occured or Not ??..Where does the WeblogicServer8.1 print the STACK TRACE if connection Leak has occured ? or does it maintain a LOG FILE , where any entries can be seen................

    To turn on Debug flags add these to the startup scripts.
    -Dweblogic.Debug=weblogic.JDBCConn="true",weblogic.JTAJDBC="true"
    Essentially, you will need to edit the config.xml file (when the server is down) and add the proprty to the ConnectionPool definition:
    http://e-docs.bea.com/wls/docs61/config_xml/mbeans.html
    ConnLeakProfilingEnabled="true"
    Thanks and regards,
    Pazhanikanthan. P

  • How to know whether a vacation rule is set for a user

    Hi,
    How to know whether a vacation rule is set for a user or not in the BPM process. Can anyone help me in this.
    Thanks,

    In Linux a user has to have read permission on a file to even see that it exists. As a result, if a user (or a group to which they belong) doesn't have read access to the file File.exists() will return false. Windows which doesn't have as tightly controlled access to files will admit that a file exists whether it can be read or not.
    PS.
    This is proof that I should never answer a question off the top of my head when I haven't had my red bull yet. This is wrong. You will be able to see it if you have read and execute on the directory.
    thumps self in head
    Message was edited by:
    puckstopper31

  • How to know whether my system is J2EE compliant or not?

    How to know whether my system is J2EE compliant or not?
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\Administrator>java -version
    java version "1.6.0_16"
    Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
    Java HotSpot(TM) Client VM (build 14.2-b01, mixed mode, sharing)Is my box J2EE compliant?

    Trust me - I've been developing on an XP box for years and Java 1.6 for a good amount of time. This has been using Tomcat, JBoss, and Glassfish (and I try hard to forget about Oracle OC4J). These are application servers that implement part (Tomcat) or all (the rest) of the J2EE specification.
    Having said that, you'll want at least 2GB of RAM and a hundred or so megabytes of disk space. Less RAM will work but slowly. A reasonable processor (I'd say at least 1.5GHz or above) will speed development.

  • Does anyone know whether BT has a mail server that...

    Does anyone know whether BT has a mail server, other than mail.btinternet.com, that supports only POP3/SMTP and not IMAP?  For those interested, the background is as follows.
    I've been trying to get my iPad Mail client to connect to mail.btinternet.com using POP3/SMTP.  When you try to set up an email account on the iPad in the normal way, you are not given the choice of using POP or IMAP.  The Mail client appears to query mail.btinternet.com and, if it determines that the server supports IMAP, it then proceeds to set up a connection using IMAP.  Now, I know a workaround to force the Mail client to connect using POP3/SMTP.  That is not the problem.  The problem is that Mail client does not appear to work properly with POP3/SMTP, and I suspect this is because some of the Mail client code, under the covers, still believes it is using IMAP.
    For example, having setup an email account that uses POP3/SMTP, if I try to create a local mailbox/folder on the iPad Mail client, the operation fails with the message "Unable to Create Mailbox The mailbox couldn't be created on the server".  So I ask myself, why is the Mail client trying to create a mailbox/folder on the server?  The conclusion I have come to is that the Mail client still thinks it is using IMAP.
    I suspect that there are defects in the iPad Mail client code.  But, to test this, it would be good to experiment by setting up a connection to a mail server that supports only POP3/SMTP and not IMAP and then see whether the Mail client behaves any differently.  Hence my initial request.
    Solved!
    Go to Solution.

    Both my wife and I use the Outlook mail client on Windows for our "serious" email and we are very happy with Outlook.
    The iPad is actually my wife's and she bought it for other reasons, such as to Facetime friends and relations, install the Kindle app and read Kindle books, use the BBC iPlayer app, and so on.  But I have set up a separate btinternet email address for her to use on the iPad and she intends to give that email address only to certain close relations.  But, so far, we have found that the iPad Mail client is just not usable with POP/SMTP, and she doesn't really want or need to use IMAP.
    Edit:  Sorry, forgot your specific question.  No, it doesn't create the folder/mailbox locally.  It fails completely.

  • How to know whether my Windows Phone 8.1 App is Associated with the store or not?

    How to know whether my Windows Phone 8.1 App is Associated with the store or not? 
    I have an Windows Phone 8 app already in the store , Now i upgraded it to 8.1 it got upgraded to Windows Phone Silverlight 8.1.
    Now iam trying to use Single Sign on feature on this app but it is showing the error message like
    the App is not Configured correctly i followed the process from  Signing users in to OneDrive
    please guide me how to do this?
    Mohan Rajesh Komatlapalli

    You should post to publish forum.

  • How to know whether there is any change in a transaction in ic webclient

    Hi,
    There is one activity screen in the ic web(CRM 5.0). There is two button(Change, Save , Sendnotification) on that screen.
    Sendnotification: if i click this button then it will check whether there is any change done using  below logic and will send the noti..:
    DATA:lv_transaction   TYPE REF TO if_bol_transaction_context,
    lv_entity       TYPE REF TO cl_crm_bol_entity.
    lv_transaction = lv_btorder->get_transaction( ).
          IF lv_transaction->check_save_needed( ) EQ 'X'.
             then save the changes  and send notification
          ENDIF.
    Question:
    Now i clicked on the Change button and did some changes.Then saved.
    Then again i did some changes, now i clicked on the Sendnotification button.It sent an notification.
    Now i again clicked on the Sendnotification(this time i didnt do any changes), it sent the same notification again.
    So how to know that  actully changes done or not & how to write code if there is no changes?
    During debugging , i found that the method check_save_needed always returns 'X' as long as i am in the chage mode of that activity. As a result if i dont do any changes also in the activity and click the button , it sends the notification.
    please suggest how to restrict  using coding........
    Thanks
    sudhansu

    Not solved.

  • How to know whether a method is thread-safe through the java-doc?

    In some book, it says that SAXParserFactory.newSAXParser() is thread-safe,but in the java-doc,it doesn't say that.
    newSAXParser
    public abstract SAXParser newSAXParser()
    throws ParserConfigurationException,
    SAXExceptionCreates a new instance of a SAXParser using the currently configured factory parameters.
    Returns:
    A new instance of a SAXParser.
    Throws:
    ParserConfigurationException - if a parser cannot be created which satisfies the requested configuration.
    SAXException - for SAX errors.
    I want to know, how to know whether a method is thread-safe?

    System.out is a PrintStream object. None of the methods there use the synchronized modifier, but if you look in the source code, you will find out it is thread-safe, because it will use synchronized blocks whenever it writes some text.
    The source code is in the src.jar file which you can extract.
    I didn't find any comments about that PrintStream is thread-safe in the API.

  • How to know whether the Content Type at Library level is Inheriting Parent Content type or not Using Powershell?

    Hi,
    How to know whether the Content Type at Library level is Inheriting Parent Content type or not using Powershell?
    Is there any property for that? Or Do I need to compare the Content type Id's at Site collection level and Library level?
    Any help would be greatly appreciated.
    Thank you,
    AA.

    Hi Ashok,
    For a content type, there is an attribute called Inherits, the value of this attribute determines whether the content type inherits fields from its parent content type when it is created.
    If Inherits is TRUE, the child content type inherits all fields that are in the parent, including fields that users have added.
    If Inherits is FALSE or absent and the parent content type is a built-in type, the child content type inherits only the fields that were in the parent content type when SharePoint Foundation was
    installed. The child content type does not have any fields that users have added to the parent content type.
    More information, please refer to the link:
    https://msdn.microsoft.com/en-us/library/office/aa544268.aspx?f=255&MSPPError=-2147217396
    Best Regards,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to know whether database(oracle) is up and running at OS level

    how to know whether database(oracle) is up and running at OS level...!!!

    depends on the O/S you are using, Unix or Windows? I would use Korn shell script to monitor the Oracle background process and scripts to check of Oracle is accepting connections.
    This UNIX command will show the number of processes for your instance:
    ps -ef|grep $ORACLE_SID|grep -v grep|grep -v ora_|wc u2013l
    In Windows I would look into services.msc

Maybe you are looking for

  • Porting table contents to other system

    Hi experts, We have created custom table ZXXX and table maintenance generator. We have maintained the data in development box. We have ported the transport request to other box. The TR contains function group, table, Table contents (TDDAT, TVDIR) and

  • Does Firefox support the use of AdSubtract Pro software?

    Many years ago, I LOVED AdSubtract Pro software, but at the time, I was browsing with Internet Explorer. I'm happily using Firefox now, and I need to know if AdSubtract Pro (v. 2.55 or v. 3.00) is compatible with Firefox before I order and try to ins

  • Customizing MSS

    Hi, We are trying to customize the ESS MSS screens. It includes approval and reject kind of thigs. For this process we developed some application. This application we need to integrate with the standard MSS application. When i try to import the MSS a

  • Clean re-load of music?!

    i've had a terrible time trying to make sure that all my music is in one place and that i don't have duplicates and some of this involved manually deleting folders and then re-importing. HOWEVER, itunes is still telling me that it cannot find some  s

  • Can't create apple id for child

    I am trying to create an apple id for my 7 year old son and follow all the prompts but once I come to verifying my payment method it does not advance and ask for the security code from the card. Then when I go to the app store or iTunes and enter the