How to leave account setup screen
recently I upgraded to OSx Yosemite, and needed to remake an admin account using the mount -uw and .applesetupdone, but once I finish with the new account setup, it says "creating account" and then goes back to the "welcome, choose country" screen and makes me go through the account setup again. The proceas restarts every time the setup finishes. How can I get back to my accounts and away from this setup screen?
Uprise78, its apparent that you love the SDK just as it is and take the problems as personal challenges to be overcome. That is fine.
I like the iPhone, I like Apple, but I'm not satisfied with the current iPhone SDK and I want Apple to make it a real platform where I do not have to be ingenious to get the basics that a platform should provide. Moreover whole classes of applications that should be possible are just out of the question. Its a big step forward from Brew, Rex and the like. I don't plan to go back there nor do I plan to develop for WinMobile again any time soon. But it's more than just "low level goodies" that are missing here and saying that ingenuity is all that is needed a pretty naive statement. I would rather see developers empowered by the platform than spending effort overcoming its (artificial) obstacles.
The point that was missed is that Apple drastically changed the landscape in mobile and soon its going to evolve further with Android and Windows Mobile and their forthcoming distribution models. Its a reality that Apple will soon be faced with and from what I have seen it stands to be a tough fight where it could have been (and potentially still could be) a cake walk. At the end of the day I would rather stand on the winning side with Apple but there are problems and there are many who have concerns that Apple is not making the right choices with regard to developers and the SDK.
Similar Messages
-
Exchange account setup on ipaf. When trying to send photos from my library I'm prompt to setul email accounts all over. When I try to setup the exchange account it tells me the account already exist. The default account is my exchange account, ehat is goi
ng on?Very good. I am glad it got solved. Sorry for all the confusion and frustration.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
How can I un-setup my AIM account from iChat?
Maybe this is a dumb question but I'm a new mac user. I just set up iChat with my old AIM account but I decided I don't want anything having to do with AOL on my new computer. Can anyone tell me how I can UN-setup my AIM account with iChat?
Hi
Goto ichats prefs/accounts highlight the account and click on the - button at the bottom of the window.
Tony -
How do I locate the Software Setup screen within Photoshop Elements trial product?
How do I get to the Software Setup screen within Photoshop Elements 11 trial product (to convert from trial to paid-up)?
If you are on trial application, so whenever you launch Photoshop Elements Editor, it will give you the option to serialize your product.
-
Install updates but leave "setup screen" there for new user
Ok, so I sold my Macbook Pro. I want to install OS X, update it, and then still have it open to the setup screen when the new buyer gets it.
I know this can be done, but don't know how. Can anyone help?Hi there,
this thread should help.
http://discussions.apple.com/thread.jspa?threadID=531531&tstart=0
Follow macjacks post to reset it, once the updates have been done.
regards
Ric -
i bought acrobat after a trial run. how do I install it? Where do I find the software setup screen? I received a message that I shoul just enter the serial number in the software setup screen, but I don't see that when I open the icon.
Help --> Activate
Mylenium -
When I backed up my old iPhone on iCloud, the backup does not show up on new iPhone setup screen. How do I fix this?
if I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?
-
I'm not sure what happened, but I can't leave my home screen unless I press n hold an app and move it to another page, then when i press the home button so the apps stop shaking I can stay on another page. Other than doing it that way I can't scroll from one page to another. When I click on an app a thin box appears around it, not only with apps but when I click on the time or battery or ANYTHING! In order for me to open any of the apps I have to double click on it and then when it opens I can't do anything in the app. Even when I went to settings to see if there was something in there to fix this problem I can't go anywhere or do anything. Someone please help!!!
Im having this same problem an my phone is about 3 weeks old. I am not sure about the voice over part though...I have not yet figured out how to work the voice recognition part of the phone...I am such a newbie with this phone. I did the power off/on suggestion, several times. I tried leaving it off for 10 minutes. Tried to reset with the power on/off and home button pressed at the same time. Charged battery. Still makes no difference. You cannot scroll any direction. Have to double click to open apps. Have to double click letters when texting or emailing in order to get the letter in the text box. Can scroll through app choices, have to click on the line with the dots in it and move from page to page. Can't access the settings - > general - > accessibility - because it won't allow me to scroll down to "general".
Anyone help you with your fix yet? -
Team Calendar in Read-Only Mode in Leave Request Approver Screen
Hi,
After lots of interaction and inputs in my previous thread,
Customization Done for 2 level approval of leave in ESS but Facing Problems
Our Team had decided to make the Team Calendar in Leave Request Approval Screen in Read-Only Mode (more precisely modus=TeamView)
My question is, is it possible to achieve the same, because instead of adding custom validations using Custom RFC, If it is possible to make the Team Calendar as Read-Only than it will help us to achieve our goals. Please do let us know that is it possible? and, if Yes, How to achieve it?
On leave request approval screen, we want Approver to take any action via "Show Worklist" and No User Action allowed on Team Calendar (Disabled but not InVisible).
Thanks,
Regards,
Tushar Shinde.This is the note 1484853 but as i said you cant see it unless you raise a Message for SAP , We have to add yout company to the note.
these are the steps
Symptom
In LeaveRequestApprover application, a higher level manager can
approve/reject a leave though he/she is not the owner of the approval
workitem (TS12300097). It happens when a higher level manager clicks on
the leave in the TeamCalendar launched from the LeaveRequestApprover
application.
Other terms
LeaveRequestApprover, TS12300097, prepare_select, WorkList,
LPT_ARQ_REQUEST_UIAF07
Reason and Prerequisites
Reason:- This is caused because the approve/reject button were not
restricted based on the logged in user.
Prerequisites:- IT105 entries for the backend PERNRs should be correctly
maintained.
You can check here
Object REPS LPT_ARQ_REQUEST_UIAF07
Object Header FUGR PT_ARQ_REQUEST_UIA
FORM PREPARE_SELECT
the note is meant for few customers only -
how can i lock my screen on my iphone that was stolen tonite, i already suspended the service to the phone, but apparantly there is a way thru icloud to lock screen and when i log into icloud, i do not see the option to select devices. if so, that is where i can lock the screen, but i can not seem to get to that.
thanks
DA. Only if the device is online.
B. Only if you set up Find My Phone before the theft.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")? Account is active.
Is it by any chance asking for a "qualifying serial number"?
-
Adding new field in SC Account Assignment Screen (only for information)
Hi guys,
we have a requirement, to <b>show</b> additional fields within the account assignment screen. The contents should only be displayed as information for the user. It is not necessary, respectively not wanted to save this data within SRM or the Backend-System.
2 questions:
a) Is it necessary to expand the item-structure of the SC (INCL_EEW_PD_ITEM_CSF_SC) AND to expand the accounting structure (INCL_EEW_PD_ACC_CSF) for this fields?
b) Is it sufficient, that the INCL_EEW*-structures of the PO-/billing-document etc. are <b>NOT</b> expanded with the additional fields to avoid the saving? In OSS-Note 458591 it is mentioned, that it is necessary to expand the CI-COBL-structure within the Backend-System.
Thanks in advance with best regards.
Bernd
ps. We are using SRM 4.0.Hi
<b>We have done this several times, in our past previous SRM implemenatations.</b>
a) Yes. You need to expand the item structure at the Shopping cart level to display your Custom fields in the We bapage. As Per OSS Note - 672960, you can see the details. For display purpose, at least these custom fields must be created in the standard include structures [e.g., INCL_EEW_PD_ACC_CSF, etc ].
b) Yes, no need to expand any other SAP Include structure, incase you don't want the field contents to be saved in backend system (incase of Purchase Order / Purchase Req).
<u>Please see the follwoing links, which deal with the similar requirements, you have asked for in detail with code and other relevant details -></u>
Re: Item Field Appearing In Account Assignment Field
Re: Control Busniess Area Field in Account Assignment..
Re: Add new account assignment field
Re: Account assignment category not passed into Target Objects Badi
Re: Add customer fields in Shopping cart and purchase order
Re: Hiding CUF fields in SC Basic data
displaying custom fields on shopping cart
Custom Fields in Cost Assignment Tab
How to add the custom field in SRM EBP shopping cart?
Add customer fields in Shopping cart and purchase order
Hope this will definitely help. Do let me know, incase you face any issues.
Regards
- Atul -
This group screen is infuriating. Why do I have to post my question twice?!?!
I registered for MobileMe, but when I go to www.me.com I'm brought back to the setup screen and I can't get past it. How do I get to the site that allows me to find my iPad?How do I get to the site that allows me to find my iPad?
You go to http://me.com/find/ on your computer.
On your iPad, you use the free Find my iPhone app from the AppStore. -
Problem in changing label in leave request approval screen
Hi All,
I have followed the SAP note 1234273 to change labels in our Leave request iViewin ESS and could do it successfullybut I could not able to know how to change the labels in Leave request approval screen because I have created a custom role and assigned Universal work list to it and assigned it to manager to view the leave requests applied. I navigated to Leave request approval screen via that role but ctrl + right click is not working on that page. Please suggest meCheck your uwl config, normally it is configured to directly call concerned(leave req approval) application hence your iview may not be getting called. You can try changing the uwl config to call PCD page instead of direct wdp application call.
~cheers
avadh -
How to go back selection screen from its next screen
I having one problem with output display
actually i am displaying data in Initial Screen, which have 6 fields
whenever i click on field 1 it should display one new screen (selection screen)which contain 6 radio buttons
whenever i click on Radio Button r1 it should go to new screen (screen 3) to display its correponding data
when i use f3 or back it should go to previous screen (selection screen), when we click radio button r2
it should go to new screen (screen n)to display its correponding data.
this what i have to display.
but i am facing some probelms during my output
i am going to initail screen from Screen 3.
how to go back radiobutton screens (selection screen) from screen 3Hi Anil,
U can get the fcode for standard <b>back</b> button by debugging. To the fcode of the "back' button.
write this code :
at user-command.
case sy-ucomm.
when 'back'.
set screen <scr no> " here scr no is the screen no of radio button screen
leave screen.
endcase.
Reward points if helpful.
Regards,
Hemant
Maybe you are looking for
-
How can I create a bulleted list where each line builds in independently?
I would like to make a bulleted list in my video where each bullet fades in as the person says them in the video (it is not at a constant rate). So far the only way I've accomplished this is to stack 6 or 7 of the 'Fade' title generators on top of ea
-
I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in
-
[SOLVED] JDeveloper 11g Data Controls Accordion Missing
Hello all, this is my first post in the forums. I am following the JDeveloper 11g tutorial found here: http://www.oracle.com/technology/obe/obe11jdev/11/rich_client/adfrichclient.htm However, once I get to the section "ADF Table Component and ADF Bin
-
Tricky question re 2 macbook pros sharing/importing to NASand sharing libra
Ok here's the difficulty I'm having. Data management.... Bought a Drobo FS to help solve image storage needs. Have imported 3 years worth of images in folders by dat (ex 2010-10-01). Is there a way for Aperture to "Add/Import" ALL of these folders AN
-
Port groups in NX7000 F2 48-port 1G/10G Ethernet module in regard to VDC?
Have couple of questions about assigning ports on the F2 1G/10G Ethernet module to VDC. Thanks for any help. 1) The older 32-port 10G Ethernet module has port groups. When assigning ports to VDC, ports in the same port group should be assigned to the